need help to program deleted / 32/rundll.exe file system

Similar Questions

• Missing 32\rundll.exe Windows\System

  Hello, I seem to have the same problem as you all. I was using what I was told was a good anti virus program, Windows defender and a few others, and yet my computer has been infected. I'd appreciate if someone could send me the file to fix my problem.  32\rundll.exe file system is on my computer and I get a message that this file is missing.  And now, I don't know what to do. I really need help. Thanks in advance.  Send an email to * address email is removed from the privacy *.  Thank you

  Run the .exe from Doug Knox fix (which is not a file .exe so you can run it) then carefully analyze for malware.

  http://www.dougknox.com/XP/file_assoc.htm
  http://www.elephantboycomputers.com/page2.html#Removing_Malware

  MS - MVP - Elephant Boy computers - don't panic!

• I really need HELP! I received the nugel.exe virus on my laptop and I really missed the whole system! PLEASE HELP ME SOLVE THIS!

  I really need HELP! I received the nugel.exe virus on my laptop. I have Windows XP and I was reading how to remove it. They told me to go to click on the Start button in it, then click on run. type msconfig and on the Startup tab, uncheck everything that ends with TSSD. Well, none of which ended in TSSD was there, so I was told everything that had an UNKNOWN manufacturer in buttons SERVICES and STARTUP uncheck. I restarted my computer and the NELSON was always there.  Then suddenly my computer shut down on its own and restarted with a screen that says now "Windows didn't start because the following file is missing or corrupt: \system32\hal.dll .» Please reinstall a copy of the above file. "Does anyone know how to do this? I feel that I've dealt with the virus stupid for days and I'm going crazy! Can someone please help me solve what I did wrong? PLEASE, I BEG YOU!

  Hi ehaze64,

  Looks like you have made incorrect changes in system configuration utility.

  See the Microsoft articles below to solve the problem by installing the recovery console and use the Bootcfg.exe tool to rebuild the Boot.ini file.

  How to install and use the Recovery Console in Windows XP

  http://support.Microsoft.com/kb/307654

   

   

  Error message: "Windows did not start because of a configuration of the disk of the computer problem.

  http://support.Microsoft.com/kb/314477

   

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer

  http://support.Microsoft.com/kb/330184

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot find the program to open the exe file

  I did the windows repair option by restarting then pressed f8 to get to come repair options. I did it to try to remove a number of problems of virus on my laptop. It seems that it has solved the problem, but now when I try to access one of my desktop icon shortcuts it indicates that windows cannot find the program to open the exe file. She does it with every shortcut. I can access the location of the program and then select open with and it will be opened in this way, but there is not and I have to select each time. Another option that works is a right-click on the icon and selecting 'start' and who will run the program properly. Other than simply double-click the icons automatically no longer works since I did this repair.

  Windows Startup Repair fixed my problem, but now my desktop icons not properly opens with double-click

  Hello

  You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

  Create a user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
  Now search for the question.
  Follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• In XP error message - unable to locate the RUNdll.exe file when trying to open Microsoft files.

  Original title: just had a fight with the virus 'Windows XP security 2011.

  I am running Windows XP Home Edition and managed to get rid of the virus, but now I can't open any microsoft file. that is, control or any downloaded files Ms. I get an error message that it can't locat the RUNdll.exe file. How to solve this?

  Thank you aleweeks

  If sfc/scannow solves your problems, I'll send you (or your charitable organization preferred) $10 American.

  This isn't the answer.  ---> pay attention -------------------------------------------->

  It's time to mark the answer but:

  This "response" meets or exceeds the requirements of Microsoft Answers forum for an "automatic response":

  1. support the answer of engineer or a moderator that is impossible, probably not or will not solve the problem
  2. marked as the answer by a comrade moderator
  3 contains a link to one or more Microsoft KB articles
  4. no activity for 5-10 days

• accidentally, I changed the default program for the openng exe files

  accidentally, I changed the default program for the openng exe files now I can't reverse my mistake and a lot of things on my count no longer works... I cnt play games or open all programs... what should I do?

  http://support.Microsoft.com/kb/950505

  Note at the beginning of the article that it says that Windows 7 users should go directly to the "Fix it myself" section

  Tricky

• Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hello, need help for Adobe Reader DC playing animation files that are specified in the pdf output by script Latex Beamer. My Adobe Reader DC refuse to open any format that I gave him.  Thank you very much

  Hey ihorl18351266,

  Please note that you can open PDF files using only the CD player. Any other format will not be supported by the software.

  Kind regards

  Ana Maria

• I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system.

  I'm trying to upgrade from windows vista to windows 7. whenever I start the upgrade, that he told me that count it needs to restart to allow changes to the file system. I restarted several times now and get the same message. What should I do to ensure that this computer can be upgraded?

  Hello

  Run the windows Upgrade Advisor 7

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  and repost in the windows forums OK 7

  Here is the vista forums

  Windows 7 forums on the link below

  http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

  Answers by topic

  • Office & Customization
  • Files, folders, & search
  • Game
  • Hardware drivers &
  • Install, upgrade, and activate
  • Internet Explorer
  • Music & Sound
  • Networking, mail, electronic, & updated online
  • Maintenance & performance
  • Photos & Video
  • Programs
  • Security, privacy, and user accounts
  • System repair & recovery
  • TV and movies on Windows
  • Windows Update

• Need help, opening programs!

  Everytime I open a program 'open with' box comes up and asks me to choose a program to open it with. When I try to restore the system, a message of system32 arrives. I bypassed the windows firewall to get the net to download its updates and I think this may have been at the root.

  Any ideas?

  Assuming that it's just the affected application, it seems to me that if the 'path' to the executable file is damaged, or moved the file relative to the application.

  What you can do is to try to locate the folder using the navigation.   First of all, try to identify where windows is waiting for the exe file by right-clicking the icon on the start menu (or the shortcut on the desktop that you normally use to open the application with.)  Select 'Properties' and now look at the "target".  This is where Windows expects the file and in your case it is not there, or maybe points to something completely different.

  For example by using the "Paint" application for example, when I click on the shortcuts in the start menu, its properties tell me that the target path is:
  '% SystemRoot%\system32\mspaint.exe '.   The executable is the bit at the end - "mspaint.exe".

  You must locate the correct executable file for your application.  If, for any reason, the application folder has been moved, you must specify the shortcut where 'look' and that it points to the new location where the exe file has moved.  Once you have done this, it will always open the correct application.

  In my example, "Painting" is a component of microsoft windows, no is executable (mspaint.exe) is stored in the root of the folder c:\windows\system32 instead - that's where I get the ' exe ' of MSPaint.  If it isn't there or points to something other than mspaint.exe, I'll have to find where it is been moved to and tell windows to point to the correct exe file manually.

  Thus, using 'Paint' for example: I click on the 'Paint' application in my Start menu but get the error you are describing - so I select 'Open with' and 'Browse '.  I then get to where I think that the place probably demand was initially installed and check that the exe file is present (and it's good!)

  For MS PAINT, if I si je puis then select "Open file location", windows will browse to the parent folder and if the executable is here, you will be able to see it.  (Exe files normally (not always good) have a small icon to help identify it.  Now be careful here, because if you click on anything other than the correct executable file, which is then used by windows to launch the application from this moment - and of course, it never work again until you tell it to use the correct executable file.    It may be that this is the cause of your problem and, if you can see the correct executable file, just click to select it, click 'OK' and see if the app launches properly. If this isn't the case, read on.

  Make a right-click on the start menu or the shortcut on the desktop to the app as above.   With the open 'Properties' box, identify the executable file of the target.  Now copy the executable name (so in my example, it would be mspaint.exe - and search for windows for that file.)   If windows can locate, note the location of the file.  Now go back to the start menu or desktop shortcut and click as if you go to the app.  When the 'Open with' error box appears, click 'Browse '.  You will then be able to search for parent of the applications folder and then down until you find the 'executable' (the file that ends with ".exe").  Double-click on the exe file (assuming you are certain that it is correct) and yer Uncle Bob!

  Of course, if windows cannot find the app folder when you do a search, then it is likely that you (or a kid sister interference) has been removed and the file exe - or even the entire folder accidentally.  In this case, you need to reinstall the application.  I hope this helps.  Sorry it's a bit lengthy - thatere are other reasons of probs as happening as the other posters are probably notice.  Good luck!

• I need help! Please delete my account

  I need help to cancel my account!  I've tried everything!

  Yes... like appearing on Adobe help pages... 3 second google search.

  Contact the customer service

  Neil

• What program to launch my exe files with

  OK so I download something on my computer and the exe file was not open so I accidentally made sure all exe files open with winrar I fixed but know that I have to open it with a program and I don't know what program I need to run exe files, I'm on a windows vista and I checked all over the internet and they say open this program but I can't because it's an exe file and none of my friends are working please help me. I don't want to restart my computer and lose everything

  Hello NicholasVigliotti,

  Take a look at this link: http://www.winhelponline.com/blog/exe-file-association-windows-7-vista/

  You will need to download a small file called exefix_cu.reg, (see the resolution section of this article). Follow the instructions in the article, and it should repair the registry and to return to the correct association .exe files.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk | vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• I still need help with a thumbnail view in video files Real Player XP sp 3

  I still need help with thumbnail view in video files Real Player XP sp 3-Help! Help! Help!

  You will need to contact the support of Real Player, since the problem occurred with their program.

• Need help with the removal of the media files on my personal computer

  I downloaded a media file and try to delete but asking special permission on my own computer and he repeats to me try again. I need help to remove this media file. Thank you very much

  You could try renaming the file, including the extension and then delete. Which can sometimes do the trick.
  If not, what type of file is and what about size? And logged as administrator?

• Need help to write a script that opens files, removes layers and sous-calques

  Hey all,.

  I'm a noob to the community of script, and what I try to do is file edit commands that share the same names of layers and sublayers. I have a few questions that would be incredibly useful if I could have answered.

  I'm not sure how to define a script too call out of the layers that have been created without script. I need to create a variable for the existing layers and leave the script to know what their names are in the files?

  For example, I have three files which have each layer named 'cutlayer', 'trimlayer', 'fold' and 'work '. I need to write a script that opens three files, deletes the layer 'fold' of each file, and then move the layer "trimlayer" in his own sublayer in 'work' (the base layer can be on the top so reorganization sublayers is not necessary to worry about something). I do not understand how to write the script because I couldn't find examples in the documentation for the script provided on the adobe website which has worked with existing files.

  It's my shot at what I'm trying to do, with English fill in the blanks of what I do not know how to script. If anyone can help me understand this point, I would really appreciate it!

  app.documents.openDlg (prompt, filter, MultiSelect);  the user opens the associated files

  If (documents.length > 0) //run the script through each document individually

  {

  sourceDoc = activeDocument;

  delete the "fold" sourceDoc layer

  move the "trimlayer" in the layer "work."

  remove the underlayment 'path' of layer "work."

  Run the script through each document

  Save the new file name folder in the new parallel to the current folder on the hard disk

  Go out and spend in each document until there is no more

  }

  create new document

  Place documents published in different layers in the new document, with a distance between them, optimize the space on a 51 "x 51" work plan, using as little of the artboard as possible. "

  All comments are things basically, I do not know how and am trying to figure out how to do, so if anyone has a second to explain some of these things, I would really appreciate it!

  Thanks again!

  I know it of very frustrating when his apprenticeship and things don't go as planned, but understand that it is quite confusing as it is and do not add more confusion to the mix by using other tools than those provided. I mean JSLint, it might be useful with GENERAL javascript syntax, but Adobe's Javascript implementation is another animal, or another language, always JavaScript, but intended to be run by its own engine. JSLint has no idea what "layers", or "pathItems" are, it will trigger errors when he sees the objects, it does not recognize.

  .. .in learning... not to take baby, write a single line of code and run... If it works, write another line of code

  Try this version (always in the ESTK),'re missing you a few "++", and you do not change "documents" with "docs" in a certain place

  var docs = File.openDialog("Select Files to Open", "*.ai", true);
  
  var idx = 0;
  
  for (idx = 0; idx < docs.length; ++idx) {
  
      var doc = app.open(docs[idx]);
  
      var myCounter = 0;
  
      for (myCounter = 0; myCounter < doc.layers.length; myCounter++) {
  
          doc.layers[myCounter].locked = false;
  
      }
  
      doc.layers.getByName('Crease').remove();
  
      doc.layers.getByName('Regmark').remove();
  
      doc.layers.getByName('Artwork').pathItems[0].remove();
  
      doc.layers.getByName('Through Cut').hasSelectedArtwork = true;   
  
      doc.layers.getByName('Through Cut').pathItems[0].strokeColor = doc.swatches.getByName("Black").color;   
  
      doc.layers.getByName('Through Cut').move(doc.layers.getByName('Artwork'), ElementPlacement.INSIDE);
  
  }
  

• Help! I deleted my ntuser.dat files!

  I fear that there may be no solution for me, my Act of complete stupidity is irreversible, but I thought I should ask to be sure.
  I deleted the ntuser .dat files.  * feature * of course, now all files in My Documents are gone along, I am sure, other really important things.
  Is it possible to retrieve such things?

  Hello

  Try restoring the system back to before that you did.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.