Need help to make ajax calls with BB OS 5

Similar Questions

• Need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012. It worked great, but after that I put an old hard drive on my PC (for 30 minutes - then I removed again) to get some information of this former, Lightroom now license application or try it for 30 days.

  I have not installed Lightroom on a new hard drive. He is always on the same hard disk. How can I now have my Lightroom to run again using my serial number and TAN? Need help to reactivate my old serial number and the number TAN.

  I use win 7.

  Duplicate thread: need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• Need help to make calls in blackberry

  Hello friends,

  I need your help to make calls in blackberry OS version 6.0 and later versions.

  I write code to use, it works very well below 6.0 but on 6.0 and above all he does not.

  When I try this code on 6.0 I receive "cannot connect, call in progress.

  According to my research, this is a specific problem of the OS, but I'm not satisfied with this research.

  Actually I do an application that will dial a specific number again and again for 5 times ({at least} chosen by the user).

  Code: -.

      Application.getApplication().invokeLater(new Runnable() {
  
              public void run() {
                  try {
                      ApplicationManager.getApplicationManager().requestForeground(appProcessId);
                      Invoke.invokeApplication(Invoke.APP_TYPE_PHONE, new PhoneArguments(PhoneArguments.ARG_CALL, phoneNumber));
                            } catch (Exception ex) {
  //                    ex.printStackTrace();
                  }
              }
          });
  

  To resolve this problem, I tried for a few weeks, but no luck.

  Please help me.

  Thanks guys,.

  I found the solution to this problem,

  to fix this, I maintain a difference of 10 seconds on each call, I did.

  Thank you once again

• Need help to short to start with AJAX

  Hello AJAX specialists,.
  
  should be a very short help thing...
  
  I tried to start with AJAX and failed to lower steps.
  
  (1) tried the example from here
  [http://www.oracle.com/technology/obe/hol08/apexweb20/ajax_otn.htm]
  
  On my own installation (XE) - I couldn't bring him to work. Seems that the application process is never called. I have it instrumented with some debug inserts into table. Find pads as expected during the test process of SQL, but never when it invoked by the JAVA htmldb_get. (Yes, I checked for typos several times)
  
  (2) tried the same example
  installing it in my space of work-OTN
  [http://apex.oracle.com/pls/otn/f?p=2439:6]
  Here, I always get the complete list of PMCS, regardless of the choice of the Department. (This is the original Oracle example unchanged)
  
  (3) reduced
  an example for the os. (So I thought)
  
  JAVAScript:
  < script language = "JavaScript" type = "text/javascript" >
  function f_getDet)
  {
  Alert ("Start f_getDet");
  get var = new htmldb_Get (null, & APP_ID, 'APPLICATION_PROCESS = XXX', 0);
  gReturn = get.get ();
  Alert ("after get.get");
  
  If (gReturn)
  {alert ('if') ;}
  on the other
  {alert ('else');  }
  get = null;
  
  }
  < /script >
  
  On request the Processs appointed XXX:
  
  BEGIN
  HTP. PRN ("very short test");
  END;
  
  
  
  If I change the field that triggers the onchange event, I get alerts 'Start '.... ', 'After... ' and 'Else... ».
  Why always "else"? Something goes wrong.
  
  Can someone put me on the track where I have my misunderstanding?
  
  Thanks in advance!
  
  
  Concerning
  Andrée

  Hello:

  Try changing the AJAX call

  get var = new htmldb_Get (null, & APP_ID, 'APPLICATION_PROCESS = XXX', 0)

  TO

  get var = new htmldb_Get (null, & APP_ID,'APPLICATION_PROCESS = XXX ",)

  CITY

• Need help as soon as POSSIBLE with RAM Preview

  Hey guys I need help with my RAM Preview and how to get it back on the default setting. I don't know what happened, but now my RAM Preview is divided on two screens. I tried literally everything to solve this problem and came to nothing. Nothing on google as well. Help, please! I need to get there soon! Here's what happens: 2016-09 - 03.png - Google Drive

  This is your equal to 2 times and not the RAM Preview Composition Panel (in fact it is seen now and not the RAM Preview... you can call him Mr. Preview if you want to get fancy). knowing how to describe your problem lies at halfway to a solution

  DON'T PANIC!

  Set it to 1 view and you'll be fine!

  

  These views are used for 3D to show the different perspectives and views spelling of a 3D scene. When they have no use in 2D. If you clicked on the option to display 2 views or more they will appear unless you change it back manually. even when you reset your workspace, they will appear - so I understand why this can be confusing.

  more about it here: https://helpx.adobe.com/after-effects/using/modifying-using-views.html...

• Need help to understand political static with Nat No.

  Hi all

  I have a Pix 515e with 6 interfaces. 5 interfaces are considered as internal that we don't want any translation NAT occur between them. We want only NAT between the 5 and the external interface.

  I created a No_Nat ACL successfully to not manage any portion of nat.

  What I have trouble understanding is the static command to allow traffic between higher levels to lower levels and vice versa.

  I understand the

  public static inside_address outside_address (indoor, outdoor)

  for the part of NAT translation.

  What I do not understand, this is when the inside address and address outside are the same, what order are going. For example, my inner interface (192.168.1.0/24) (sec100) is where the live servers, and I have another interface named accounting (192.168.2.0/24) (sec75).

  If I don't want no nat occurs between these two, I have the following

  No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit

  No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit

  NAT (inside) 0-list of access No_Nat

  NAT (accounting) 0-list of access No_Nat

  Now how can I enter the static command?

  Maybe

  static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  or

  static (inside, accounting) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  or

  static (accounting, inside) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  or

  static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  I do not understand the prescription for it and why it would be used one verses the other way. Is the security level determines the order? Do I need two static command, one for each direction?

  Thank you

  Denny

  Hello denny

  static can be defined in any way... its only traffic that determines what it... for example, if accounting dmz is access to any server on your inside interface, you normally want the accounting servers see the original on its public IP server inside... so, you will end up as static

  static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  only the above static command is sufficient to establish connectivity between inside and dmz accounting. u don't need 2 static on any sense...

  Similarly, if you want to inside users to access a server on the dmz accounting, you can write a static type

  static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  hope you understand. Let us know if you need help... but normally a statement nat 0 is more than enough for the inside / dmz communication

  Kind regards

  REDA

• Make a call with PhoneArguments

  I use this piece of code to make a call:

  PA PhoneArguments = new PhoneArguments (PhoneArguments.ARG_CALL, ExchangeNumber);
  Invoke.invokeApplication (Invoke.APP_TYPE_PHONE, pa);

  The ExchangeNumber begins with "08" (zero eight) to Stockholm. When the call is placed the number dialed is

  the prefix "1" (one) then it starts with "108".

  Why?

  Hello

  Maybe that not add the code in the country before the area code, is why it is added by default can be the U.S. country code. follow this format:

  + 1-519-888-7465 (country - regional-number code)

• I need help creating a vector mask with an adjustable edge or fade, can anyone help?

  I need help creating a vector with an adjustable edge mask or disappear so that I can surround a hand drawn - isolate the background so that I can black out around the hand, the hand a hair above, so I can not just pen tool, can anyone help?

  

  

  I recommend starting with a layer mask based on the green channel, edition that with the curves to get a decent contrast and then paint in the areas needed.

  

• Need help to make a clone of 'take this lollipop '.

  Hello

  I am in a project where I need to create a dynamic video like the famous "take this pacifier" where some content are added dynamically to video, but I have not enough experience with as3 (I'm a developer of js).

  Take this screenshot of the video for example, I need to simulate a facebook page with dynamic content in it.

  

  I think to do is create a Movieclip with all the content and insert into the scene on top of the phone screen and on each image, change the position of the MovieClip, which must be deformed to match the screen of the phone.

  All I want to know experienced developers as3 is if it is the best solution or there is another way to do this method requires a lot of manual work to match the coordinates of the screen of the phone.

  thank you guys in advance for any help.

  In an AS3 FLA, you can place a bitmap image into a movieclip and then the 3D rotation/distort the image. Put the movieclip rotated in front of the screen of the phone. You could even lead to deal with a mobile phone.

  Now, the tricky part is the two things exactly in phase, and something like this I've seen online has been achieved by importing the video in Flash, time

  line, rather than play an external video file.

• I need help to make a timelapse video.

  I need som help to make a timelapse video. Have loaded 70 pictures a 15 seconds.

  It is located on the timeline and where to stop it.

  I failed every English class that I ever had to take, even if English is my mother tongue.

  You can analyze these phrases for me.

  Have loaded 70 pictures at least 15 seconds.

  and

  It is located on the timeline and where to stop it.

  If you loaded 70 image files in a stack of layers in a photoshop document. In the timeline panel, create an image animation. In the animation of the framework Panel use the menu drop down and use make frames from layers. Then make your video or save for web, an animated gif.

• Need help to restore Iphone recycled with no password

  Hello, I received a recycled locked Iphone no password need help. Downloaded Itunes followed instructions nothing and I have no company of cells still need help. J.

  You must use a SIM card to activate the phone

  IF the phone is locked - so it must be a carrier card

  IF the carrier unlocked - any SIM card will do

  There is no need for a new SIM card

• need help to install the printer with cd rom

  Hello, I need help to install a 3310 pphotosmart printer all in one. I don't have the cd ROM any help will be greatly appreicated.

  Thank you

  Hello

  You can download the installer for your printer using the link below.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=439491&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

  Choose "Software and Driver Downloads", select your operating system, open "driver-product Installation Software" and then choose the option download Installer "Full Feature".

  Kind regards

  DP - K

• Need help to make my printer work with the new laptop.

  I just bought a laptop ACER Aspire V5-571. At the Windows experience index. Intel (R) core, 64-bit. My current project is gettting my 2005 Dell all-in - one 944 to work with my new laptop. I passed on the line and installed the recommended driver and used the printer to scan a document I then sent an email, but for some reason my computer any it will not print a page from an online account. Keeps saying needs of troubleshooting and I need to download the driver, which I did, a Vista 7 64-bit-compatible driver. How can I make this work? or what other driver or update do I need?

  It seems that Vista drivers are the latest Dell has provided.  I noticed that, they say, you have to install all the drivers for this device before installing the Vista (s).  I found the link depending on whether you should check out

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?&docid=270659&doclang=en

  Some older printers have no Windows 7 drivers, but usually the work of those of Vista.  If they are not, you can use XP mode if you have the professional or Enterprise version of Windows 7 Ultimate.  If you have the Home Premium version, you can use him anytime upgrade to professional for $90.  Of course to buy a new printer is always an option too.

  As you probably know, it is the responsibility of the manufacturer to provide drivers.  Many manufacturers have refused to provide any Windows 7 drivers for older devices.

  Good luck.