Need help to short to start with AJAX

Similar Questions

• Need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012. It worked great, but after that I put an old hard drive on my PC (for 30 minutes - then I removed again) to get some information of this former, Lightroom now license application or try it for 30 days.

  I have not installed Lightroom on a new hard drive. He is always on the same hard disk. How can I now have my Lightroom to run again using my serial number and TAN? Need help to reactivate my old serial number and the number TAN.

  I use win 7.

  Duplicate thread: need help to reactivate Lightroom 5 with my old serial number and the number TAN.  I got a license for Lightroom 5 when I bought my Leica delux 4 in 2012.

• Need help to solve the problem with the margin at the bottom of the converted pdf file.

  Need help to solve the problem with the margin of the converted CEO down. What caused the change in format?

  Hi jerrio1949,

  There is no way to change the margin, you settle back into your original file & then convert to PDF format.

  Kind regards
  Nicos

• Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the

  Need help to open two images with the same file with different exposures on the screen at the same time in the Photoshop creative cloud (in previous versions we could open two images of the same nef (raw) file and then combine them on the screen with the move tool. They have become a composite of two layers which could be developed further with the mask tool.

  Hello

  Please go to the preferences > workspace and uncheck the option 'open the document in the tabs '.

  

  Now you can click on file and choose file > open and open the two images in two different windows which can be arranged side by side.

  Thank you

• I need help creating a vector mask with an adjustable edge or fade, can anyone help?

  I need help creating a vector with an adjustable edge mask or disappear so that I can surround a hand drawn - isolate the background so that I can black out around the hand, the hand a hair above, so I can not just pen tool, can anyone help?

  

  

  I recommend starting with a layer mask based on the green channel, edition that with the curves to get a decent contrast and then paint in the areas needed.

  

• Need help to understand political static with Nat No.

  Hi all

  I have a Pix 515e with 6 interfaces. 5 interfaces are considered as internal that we don't want any translation NAT occur between them. We want only NAT between the 5 and the external interface.

  I created a No_Nat ACL successfully to not manage any portion of nat.

  What I have trouble understanding is the static command to allow traffic between higher levels to lower levels and vice versa.

  I understand the

  public static inside_address outside_address (indoor, outdoor)

  for the part of NAT translation.

  What I do not understand, this is when the inside address and address outside are the same, what order are going. For example, my inner interface (192.168.1.0/24) (sec100) is where the live servers, and I have another interface named accounting (192.168.2.0/24) (sec75).

  If I don't want no nat occurs between these two, I have the following

  No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit

  No_Nat of the 192.168.1.0/24 192.168.2.0/24 ip access list permit

  NAT (inside) 0-list of access No_Nat

  NAT (accounting) 0-list of access No_Nat

  Now how can I enter the static command?

  Maybe

  static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  or

  static (inside, accounting) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  or

  static (accounting, inside) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  or

  static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  I do not understand the prescription for it and why it would be used one verses the other way. Is the security level determines the order? Do I need two static command, one for each direction?

  Thank you

  Denny

  Hello denny

  static can be defined in any way... its only traffic that determines what it... for example, if accounting dmz is access to any server on your inside interface, you normally want the accounting servers see the original on its public IP server inside... so, you will end up as static

  static (inside, accounting) 192.168.1.0 192.168.1.0 netmask 255.255.255.0

  only the above static command is sufficient to establish connectivity between inside and dmz accounting. u don't need 2 static on any sense...

  Similarly, if you want to inside users to access a server on the dmz accounting, you can write a static type

  static (accounting, inside) 192.168.2.0 192.168.2.0 netmask 255.255.255.0

  hope you understand. Let us know if you need help... but normally a statement nat 0 is more than enough for the inside / dmz communication

  Kind regards

  REDA

• Need help as soon as POSSIBLE with RAM Preview

  Hey guys I need help with my RAM Preview and how to get it back on the default setting. I don't know what happened, but now my RAM Preview is divided on two screens. I tried literally everything to solve this problem and came to nothing. Nothing on google as well. Help, please! I need to get there soon! Here's what happens: 2016-09 - 03.png - Google Drive

  This is your equal to 2 times and not the RAM Preview Composition Panel (in fact it is seen now and not the RAM Preview... you can call him Mr. Preview if you want to get fancy). knowing how to describe your problem lies at halfway to a solution

  DON'T PANIC!

  Set it to 1 view and you'll be fine!

  

  These views are used for 3D to show the different perspectives and views spelling of a 3D scene. When they have no use in 2D. If you clicked on the option to display 2 views or more they will appear unless you change it back manually. even when you reset your workspace, they will appear - so I understand why this can be confusing.

  more about it here: https://helpx.adobe.com/after-effects/using/modifying-using-views.html...

• Need help: loop of pl/sql with UTL_FILE reading and analysis of file text 2

  Hello, I am working on a new project using the UTL_FILE utility in oracle 11 g. and I was wondering if someone could help me with a pl/sql code, I can't understand.
  My goal is to open and then read a Type_de_fichier file1.txt
  copy a specific paragraph of the file1.txt where
  the first word in a specific line in the file1.txt starts with "foo" then when the last word in fichier1.txt ends in 'ZEN'
  write to file2.txt only the analysis section in my where statement.
  I don't know if it's possible, but any guidance will greatly appreciate!
  
  My code example:
  
  CREATE OR REPLACE PROCEDURE my_app2 IS
  Utl_file.file_type inFile;
  OutFile utl_file.file_type;
  buffer VARCHAR2 (30000);
  BEGIN
  -Open a file to read
  InFile: = utl_file.fopen ('TEST_DIR', 'mytst.txt', 'r');
  -Opens a file for writing
  OutFile: = utl_file.fopen ('TEST_DIR', "Out.txt", "w");
  
  -Check the file is open
  IF utl_file.is_open (InFile) THEN
  -lines in the file in loop
  LOOP
  BEGIN
  UTL_FILE.get_line (InFile, buffer);
  -Write to out.txt
  UTL_FILE.put_line (OutFile, buffer, FALSE);
  UTL_FILE.fflush (outfile);
  
  EXCEPTION
  WHEN NO_DATA_FOUND THEN
  EXIT;
  END;
  END LOOP;
  END IF;
  UTL_FILE.fclose (INFILE);
  UTL_FILE.fclose (outfile);
  EXCEPTION
  WHILE OTHERS THEN
  RAISE_APPLICATION_ERROR (-20099, "UTL_FILE Unknown Error");
  END my_app2l;
  /

  Hello

  According to the code should work-

  CREATE OR REPLACE PROCEDURE my_app2 IS
     infile              utl_file.file_type;
     outfile             utl_file.file_type;
     buffer              VARCHAR2(30000);
     b_paragraph_started BOOLEAN := FALSE; -- flag to indicate that required paragraph is started
  BEGIN
     -- open a file to read
     infile := utl_file.fopen('TEST_DIR', 'mytst.txt', 'r');
     -- open a file to write
     outfile := utl_file.fopen('TEST_DIR', 'out.txt', 'w');
  
     -- check file is opened
     IF utl_file.is_open(infile)
     THEN
        -- loop lines in the file
        LOOP
           BEGIN
              utl_file.get_line(infile, buffer);
  
              IF buffer LIKE 'foo%' OR b_paragraph_started
              THEN
                 --write to out.txt
                 utl_file.put_line(outfile, buffer, FALSE);
                 b_paragraph_started := TRUE;
              END IF;
  
              IF buffer LIKE '%ZEN'
              THEN
                 b_paragraph_started := FALSE;
              END IF;
              utl_file.fflush(outfile);
  
           EXCEPTION
              WHEN no_data_found THEN
                 EXIT;
           END;
        END LOOP;
     END IF;
     utl_file.fclose(infile);
     utl_file.fclose(outfile);
  EXCEPTION
     WHEN OTHERS THEN
        raise_application_error(-20099, 'Unknown UTL_FILE Error');
  END my_app2l;
  /
  

  What I've done here is added a new Boolean variable. Loop in each iteration after reading one line, we check if the line starts with "foo". If yes then set the Boolean variable and writing out the startup file until we get a line that ends with "ZEN." That way even if there are several paragraphs in an input file starting with foo and ending with ZEN, then those should get copied to the output file.

  Hope this helps,

  -Gregory

• Need help to restore Iphone recycled with no password

  Hello, I received a recycled locked Iphone no password need help. Downloaded Itunes followed instructions nothing and I have no company of cells still need help. J.

  You must use a SIM card to activate the phone

  IF the phone is locked - so it must be a carrier card

  IF the carrier unlocked - any SIM card will do

  There is no need for a new SIM card

• need help to install the printer with cd rom

  Hello, I need help to install a 3310 pphotosmart printer all in one. I don't have the cd ROM any help will be greatly appreicated.

  Thank you

  Hello

  You can download the installer for your printer using the link below.

  http://h10025.www1.HP.com/ewfrf/wc/product?product=439491&LC=en&cc=us&DLC=en&task=&lang=en&cc=us

  Choose "Software and Driver Downloads", select your operating system, open "driver-product Installation Software" and then choose the option download Installer "Full Feature".

  Kind regards

  DP - K

• Need help to solve the problem with worm:win:32 / cridex.e

  Please help me to solve this problem worm:win:32 / cridex.e

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Need help finding a slimline s5213w with win7 64-bit recovery CD

  Trying to help his sister-in-law find the restore CD. It crashed the computer and can't find the original ones.

  would welcome any suggestions on the problem. It is a 2009 model

  Thank you

  Plugman

  Hi, Plugman:

  Please read the info on the link below to find out how the recovery disks command for the PC.

  http://support.HP.com/us-en/document/bph07143

  HP should have drives for this model yet. If there is a link to order and it doesn't work, just call HP and order by phone.

  If by chance HP does not, you can order a set of this provider, but you will have to pay almost double.

  http://www.computersurgeons.com/ProductDetails.aspx?ID=14741

  You can also make your own regular install of W7 disc and allows to reinstall windows 7 If you can read the product key 25 character microsoft on the COA sticker on the case of the PC. You will have none of the programs supplied with the PC using this method, however.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Help, please! I need help installing own window 8 with LEGACY BOOT OFF

  Hello world!

  I am running in a difficult situation. During the installation of windows 8 UEFI with Legacy Boot Support off the POWER, then the WINDOWS SETUP doesn't detect any HARD or SSD drive. Then I had to install windows 8 UEFI Legacy BOOT SUPPORT market. When all install them, I turn OFF LEGACY SUPPORT, my computer running INACCESSABLE_BOOT_DEVICE error.

  Experts please help.

  With Legacy BOOT SUPPORT works, my computer so slow startup and there are too many startup steps taken in place.

  Thank you!

  SUMMARIZE:

  1: install Windows own 8 UEFI

  2: SECURE BOOT: WE

  3: THE LEGACY SUPPORTED STARTING: OFF

  Dear KNRK!

  I'm so happy. Everything seems to be in trouble, so I have to use the legacy on support. I installed the windows 8 install any update, and then upgrade to windows 8.1. The first initialization of the windows 8.1 installation, I go into the BIOS, then choose restore default.

  Like a charm, everything's fine. Now he worked on Legacy support OFF and Secure Boot on.

  BTW, I'm sharing my EXPERIENCE on installing windows 8 with UEFI.

  1. create UEFI USB BOOTABLE WITH RUFUS

  2. IF can detect the drive HARD or SSD IN WINDOWS SETUP is FINE

  If 2 is not available

  Go to 3

  3. TURN ON LEGACY SUPPORT

  3A - CREATE UEFI-BOOTABLE USB WITH RUFUS USNG MBR SYSTEM FOR BIOS

  4-USE TROUBLESHOOT - COMMAND PROMT

  5. CLEAN THE OS INSTALLED HDD

  6 - CONVERT TO GPT

  7-ACTIVE

  8 - RESTART

  9-HDD DETECTED

  10 INSTALL

  IF ENCOUNTER 03200024 ERROR 0 x

  SOLUTION - REMOVE ALL HARD DRIVE - JUST LEAVE THE OS INSTALLED HARD DRIVE

  AFTER FINISH INSTALLATION - REINSERT THE OTHER HARD DRIVE.

  TO OBTAIN AGAIN A MISTAKE.

  SOLUTION - CLEAN HDD VIA USB BOTABLE WITH MBR SCHEME FOR UEFI

  CONVERT HDD OS INSTALLED TPG, ACTIVE

  THEN AGAIN CREATE USB BOOTABLE WITH TPG TO UEFI SYSTEM

  EVERYTHING'S OK. BUT LEGACY SUPPORT MUST BE ON.

  INSTALL ALL OF THE UPDATE, INSTEAD OF UPGRADING TO WINDOWS 8.1

  IN THE FIRST REBOOT, GO TO BIOS THEN RESTORE THE DEFAULT SETTINGS.

  EVERYTHING'S FINE.

  GOOD LUCK, EVERYBODY

  Thank you very much for your help.

• Need help! Does not start. Only get '_' in the upper left corner.

  Hi, have the following computer:

  HP-Pavilion model: KZ849AV-ABA s3500Z

  Running: win 8.1 (32B) 2G ram

  Have not had any problems I know, so far.

  Run norton regularly, no problem.

  Stop the machine to get out.  Returned, tuned back on and now will not start.

  It lights up, passes in front of the screen for "F9" "F11", etc.

  Then crashes on startup with a single "_" in the upper left corner.

  No beeps or error messages.

  Have you tried several attempts to diff power off, unplug, etc..  Same results.

  Have tried to interrupt the boot to make "diags", see the boot menu.  Everything seems fine, from what I can tell.

  Don't know what else to do.

  As mentioned, saw no problem before that to my knowledge.

  It helps the tight connections and no keyboard activity.

  Possible victory 8.1 automatic update when the last stop arrived.

  Recovery disks, I did several months ago when I upgraded to OS to win 8.1

  But I don't want to go down that path and reload everything.

  Any ideas how to check the boot sectors, chkdsk, etc.. ???

  Thanks in advance,

  Hi guys, thanks for all your comments.

  I managed to understand.

  I used the 'flash' player who made victory - 8.1 you create during the installation of win - 8.1 fresh.

  It's like a recovery disk.

  I started off of him and was able to use Diagnostics out of it to check the hard drive.

  He said it was to fix hard drive errors, then restarted.  Got the same new cursor. Then run this process again.

  Got mesg diff on the correction of hard disk errors, please wait.

  It restarted again and is came fine.

  Several reboots confirm the problem disappeared.

  I think that probably the hard drive boot sector becomes corrupted.

  I'll keep and eye to it and document, we had this problem with the machine.

  Will chose to replace the hard drive or buy a new machine.  Which ever option the woman wants to take (his machine).

  Thanks for your comments.

  PS You forgot to mention that I disassembled the machine and cleaned carefully.  Back together and restart with the same problem.  Then I did the above stuff.

• Need help on client requirement - correspondence with dynamic reference data in real time

  Hello

  Please help me with the corresponding real-time customer's requirement.

  I've been through time real guide- real time corresponding

  Who are there are two ways to do real-time corresponds according to the given URL.

  1 - prevention of real time duplication

  2 - match of real-time reference

  
  

  Now guests feel difficulty to go with approach 1, which is demanding a better interaction between the application UI and OEDQ (developed in JAVA). They are not agree with solution 1.

  
  

  Now approach 2 is ok, but the reference file change dynamically through this UI application, now I need update OEDQ reference data respectfully change data, but this will require downtime of the web service and re-read that take about 10 min (700 K records).

  so, what could be the solution for this scenario?

  
  

  
  

  
  

  
  

  Hi Mike,.

  Thanks a lot for your fast turn around.

  Yes, I agree but not ready to implement the first solution, then I'm left with the second client option.

  So, what could be the tactical solution more this situation coming?