Reinstall vist on my pc says I need a disk to reinstall on the pc, but got not one I can do
lost all data on my pc it says now I need a disk to reinstall on the pc but does not got one I can do
Hello
Here are the different ways to reinstall vista
Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it
they do it for a nominal cost of $
also ask them if you have a recovery partition on your hard drive to get back to the way you bought
you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer
Ask them of the exact key sequence
or borrow a microsoft dvd vista
Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer
they contain all versions of vista
This is the product key that determines which version of vista is installed
http://www.theeldergeek.com/Vista/vista_clean_installation.html
Save all data, because it will be lost, do the above
How to replace Microsoft software or hardware, order service packs and replace product manuals
http://support.Microsoft.com/kb/326246
Tags: Windows
Similar Questions
-
infrared receiver is missing a driver intell corperation
Hi, VeronicaFox,
When you have downloaded the driver gave the option to Run in order to install the driver? You click Yes or run the file
Here is an example:
Installation and uninstallation of an infrared/Windows driver monitor procedures. -
Windows 7 says I need to install this driver for the scanner to work, but I can't.
As for all the HP drivers, simply visit the HP support site http://support.hp.com/, enter the model number in the search box, click on the link drivers and you're there. http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=3442754&lang=en&cc=us&TaskID=135&prodTypeId=18972&prodSeriesId=3442750
-
I have the version of Lightroom 6 buy. I uninstalled and reinstalled. But now I can't update. Need me always to Adobe Creative cloud, which I did not. How can I do?
At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager
I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually
Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/
-
I tried to use my Photoshop CS after a long period of non-use and he said "need to reactivate the program but I not activate - then the activation of the phone no longer works and the screen says that it was more long then 30 days if the program will not even start righteous outputs photoshop so I can't use the Help menu - I went to the adobe Web site and logged into my account and it lists my Photoshop CS as. activated in 2011 - which I guess is when I activated it - does - what I do?
-
Hi I bought Acrobat Pro for my pc a few years ago. now, I spent from the pc to the mac, but can't seem to reinstall Acrobat Pro. Managed to download the program, but the serial number is not recognized. Can I still use my Acrobat Pro purchased on my mac?
probably not.
you need a platform swap (Exchange a product Adobe of a different version of the language or platform) but which is only supported for the latest versions of adobe.
You can get the upgrade pricing and exchange platforms, or use an abonnemement DC acrobat and use on both platforms.
-
Help! I NEED to connect my iPhone5s to the stereo, but it has only one usb port and whenever I connect it, it connects? Is there a setting I need to change on my phone? Help, please
You will need something like that and a micro USB to USB cable
http://www.Apple.com/shop/product/MD820AM/A/lightning-to-micro-USB-adapter
-
At the old version of adobe reader and upgrade inadvertently WAA CD player. realized that I could change is no longer with this and tried to uninstall and reinstall and older versiono, but could not. Tried to reinstall the domain controller new version and it would not, indicating that the newer Version is already installed. Nothing in programs and features.
Looks like a job for the cleaning tool: Download Adobe Reader and Acrobat tool - Adobe Labs.
If you prefer XI player, make sure that "Install updates automatically" is not enabled under Edit > Preferences > Updater. It is possible to download and apply patches manually.
-
Hi, I currently pay monthly to the handset Lightrrom 5/Photoshop but I need to be able to merge several images in "Merging HDR" but is not one of the options I can choose currently highlighted. I guess I'll have to move to Lr 6 but I am struggling to see online how to change the plan?
I suppose you're running a 32-bit Windows version - if PS CC 2015 is available but LR CC 2015 is not.
Help / System Info in LR 5 and look for Application Architecture and System Architecture a few lines down in the list of information. Something with a 32 or x 86 is 32-bit. Something with x 64 is 64-bit.
You will need a 64 bit OS to run LR CC or LR 6.
-
I have connected, but when I need to update apps, again request the password, but it does not work?
Birgitte salvation,
Have you tried to enter your system password.
Please let know if it still does not.
Concerning
Megha Rawat
-
Cannot access the kuller or the bookhouse inside the adobe programs, they say I am disconnected (e) the cloud, but I'm registered, what can I do?
Taylor the last update the cloud did, I can't access any library, no kuller, the cloud in illustrator I didn't say soul sighed, but I am enrolled in the cloud, I can download programs, what is wrong. ? Help
OK - In Illustrator get to HELP. Sign in with your username there. Restart Illustrator. That's the question is! Hope this helps
-
I had to wipe the hard drives on these systems, valad codes exist on computers, I received a message that my system vista s code was wrong also, I could entered the wrong one, because it is a laptop that has been around the world a couple of times on a submarine with me, if the thumbnail has been somewhere and I can't tell if it's a q.o , or a c.
What can I do about it?
Ive been fixing computers for a few weeks now and I'm starting to think that if I wipe the hard drives with a nuclear weapon that program its easier then in case of problems the problems generated by my children,.
Ive still 3 more fix, but this last one won't let me in him and the custom of vista, that either, I left my vista ultimate go on this one and put xppro on it, I don't like vista and I wanted to do that for a while, is there anyone to call, I can take photos of computers or video , or start a webcam, to provide evidence of the stickers,?
Dan Falcon
yellowbronco
MS/CS/SS USN - Ret / tell.
Hello
You can access the link that provides information on how to identify, locate, and replace a product key
-
Can someone help me, I can't reformat a laptop compact with a windows vista Business edition OS. I was wondering if I could use the recovery partition or do I have to use an installation CD. And by the way, just to give you a head I'm just a beginner and badly needs help. the problem I had is I get a strong signal for my WiFi, but again it is not connect to the internet it connects sometimes but then after I reboot my phone it comes back with the same problem, it connects to the internet, but I detect my network, someone told me to just reformat the entire system. I hope someone can give me a help step by step on how to do it. and also I do not see the product key for my system. your help would be greatly appreciated thanks
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
Formatting/reinstalling is overkill. A bit like buying a new car because you have a flat tire.
To reinstall, you can use either the volume of recovery or the recovery disc, both should work pretty much the same. In general, the product key is located on the system like a sticker (on laptops usually on the bottom). If you can't find yours, you should contact the provider or your network administrator (and in fact, if there is a working system, you should contact them before doing anything).
Before you do this right, you can try this: click Start and type CMD. Right click on the menu entry that appears and choose "Run as Administrator". Click on continue in the UAC prompt. From the command line, run:
ipconfig/release
ipconfig/flushdns
ipconfig / renew
Allow everyone to finish (return to the command line) before proceeding to the next. When you are finished, close the command prompt. See if that helps with your problems of connection.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
-
Vista recognizes the printer but does not load the drivers - error 0x000003eb
Have even tried to load drivers generic, just to see if it works, no chance. I have on other computers with XP Pro on them and they picked it up, drivers loaded and works very well, but Vista is a different game. Tried plugging USB and gives the same error. Add a printer recognizes it, but it does not load the drivers. I can type the IP address of the printer and use a little from there prints 3 pages of a point, two pages are all kinds of different characters, it waste paper.
Microsoft has looked everywhere and they want me to pay for OS problems out there and I'm not a fact. Program there is the problem that they should back is no Vista how the wrong subject.
Looks like you can have the wrong drivers or not everything you need (drivers, firmware and software) or you do not have the installation in the right order (some require that the printer is connected and on, others require it only and power off, and other required he be attached and powered at a point issue). I suggest you go to the Xerox support page for your printerhttp://www.office.xerox.com/printers/color-printers/phaser-6250/sprt-enus.html and download everything you need for your printer and your version of Vista. Then read the articles about how install and configure the printer (unlike many other devices, printers are not intuitive and are picky about the way in which they are installed and will not work if not done according to the instructions). If necessary, that it includes a toll-free technical support number where they may be able to guide you through the process, or at least make sure that you understand the conditions, steps and the order of the steps to do it right yourself.
I checked on the error and this can mean many things for a great many printers - but I could not find any reference to your specific printer to help us. It is said that it was a mistake than if you have enabled and UAC if off and then back on it would solve the problem - but that sounds not just for me. You really need to discuss this with HP and I don't know that they will have you place and operate at any time. I don't believe technical support is costly (there is no mention of this at all) - but if the fact of telephone support, information on the website is free and they have other means of contact which are free (but are not as effective as a telephone conversation). If you do the research and read relevant articles, I am sure that you can do. No, Vista makes it as easy as XP, but it can still be done.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
With 7 Player, I created a VM XPSP3 on Win7-64 guest and was able to connect and print correctly after installing the VM Tools.
However, under a multitude of Vista-32 running the latest available Player 6, the resized copy of VM sees all printers host very well, but prints never. The documents appear in the comments queue, then disappear after a minute or two, as if they printed. The printer itself is not even wake up. This happens for any printer tested. The same printers print without problem from the host Vista OS itself.
I noticed that in the configuration of the VM on the host, no 'Printer' entry in the list of devices, even if I remember well, seeing that the entry on the Win7 host when I was testing on it.
This seems to be a Player 6 configuration problem or a problem with the tool of ThinPrint not correctly passing through the print job to the host - apparently he just think that it is.
What is my best way to troubleshoot and resolve this? I'm pretty new to VMWare is currently pretty much a black box.
I'll try to uninstall and reinstall the tools if possible and report back if that helps.
Success!
I followed my comment on the missing printer entry in the settings of the VM on the host. By adding one solves the problem. Nothing else was required.
Maybe you are looking for
-
I can add avoid tolls on the cards?
I want the option to 'avoid tolls' on maps. Is this already available? If so, how to set it? If not, why? This is a Google map option.
-
Accidentally, I clicked on the "point" next to the email... the "junk mail" column and e-mail is completely gone... not in the junk e-mail folder. I didn't delete it, but can't find it and I read many of the help articles and looked at her side and w
-
Help upgrade memory needed please
HelloI have a HP Touchsmart 300-1020 desktop computer, and I want toupgrade of my memory which is currently a two Micron 2 gb 2rx8PC3 - 10600S - 9 - 10 - F1. Very unfortunately, the motherboard seems to have onlytwo locations of available memory and
-
Hello world I have a program that is running on a DC and AC test. I would like to label each headed by a number, to call e.g. race, and I want to save to a file with the data of catch. I tried to implement this by adding to my program code attached t
-
Help - SkyDrive provides a way to link Excel spreadsheets?
At my office, we use a drive concept (F:\) traditional network shared. This works very well because we can create multiple Excel worksheets and fed each other via VLOOKUP and absolute reference. In addition, these are shared documents, so multiple