With the help of Apple's Time Capsule with Lightroom

Similar Questions

• Need help to set up Time Capsule to extend the current U - pay Wi - Fi.

  I am trying to extend my current Wi - Fi signal from AT + T U-Verse. I have a time capsule 1 TB and a Macbook Pro w/Retina Display. When I go in the most convenient airport Configuration it allows me to select "Extend a current network" but who is she won't let me go. The only option that it allows me to move forward with is to create a new network. I do not have the ability to plug directly into the router as I rent and do not have access to the actual router, just the Signal Wi - Fi. Please help with suggestions. I tried a factory with the time Capsule hard reset and still nothing. Thank you.

  Sorry, but the time Capsule and other Apple routers will expand only wireless network that is provided by another router from Apple.

  Another way of saying the same thing, it's that if you want to extend wireless network using an Apple product, you will need two of them... a close Uverse router/modem connected using Ethernet and set up to "create a wireless network"... and another airport located remotely to "extend a wireless network.

  Since you say that you can not access the Uverse router, that will make things very difficult.

  The only thing that peut work would be to add an AirPort Express and configure it to 'join' the Uverse wireless network. When she did this, it can then provide an Ethernet signal to the time Capsule, which in turn can be configured to provide your own private network.  In other words, the AirPort Express would act as a wire-to - Ethernet without 'bridge' to ensure the Ethernet connection that requires time Capsule.

  If you decide to try this, it would be a good idea to understand the return policy of the store on the AirPort Express before you buy. With unusual game like this, the only way you will know if it will work in your home is to try in your home.

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• The update of the firmware bricked just my time capsule.

  I followed the prompt to update the firmware today and I got a 'did not finish' message type. (I don't remember what it was because I just clicked on past)

  'The airport' (which is my Time Capsule) is now Undiscoverable. I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  Now, I'm stuck in a dystopian nightmare of the 1980s with all the promises of technology and yet none of its features.

  Help!  (I write from my phone. A device that I've recovered from the future)

  I rebooted all the usual culprits (router, computers, time capsule) and did a hard reset on the time capsule itself, but still can not find airport utility "" my TC.

  If you Hard Reset the TC, it is normal that AirPort Utility cannot find the TC... given that AirPort utility displays only devices of the airport that have already been configured.  The TC is not configured, so it's a Station of Base AirPort "nine" with the default settings.

  Start over and set up the TC to help "Assistant" Installation of Apple on your Mac or your iPhone / iPad.  After the back if you need some advice on this.

• need help to set up Time Capsule with hub of sky

  Hi, I bought time Capsule and followed the instructions re. Connection cable internet hub in wide band directly on port WAN on TC. And yet nothing is happening outside orange flashing and message of airport utility saying it could not connect to the internet. I bought an Ethernet cable, just in case and tried to connect it to LAN to LAN, and I was able to create a 'network' but always seeing flashed. Can anyone help? Thank you!!

  El Capo can be really rotten networking.

  The skyhub is a router... I think it's okay... If you connect a computer directly into it, you should have internet?

  The TC may work very well in this configuration.

  Ethernet connector of skyhub LAN WAN TC as you did originally... correctly.

  So I highly recommend ethernet to the computer... because it helps no end. And even to pass the airport utility to use ethernet instead of wireless.

  Here (if obvious really that you would have ethernet under other Wi - Fi... don't know why I found totally by chance?)

  

  The configuration... make the TC must go to bridge mode...

  It is Off (bridge mode) on the network tab.

  And you need to create a wireless network with a different name to the skyhub.

  You can probably do it manually now without too many problems.

  And even without ethernet connection... Although reliable then ethernet is streets ahead wireless.

  Click on the TC icon in airport utility.

  

  Click on change... at the bottom right on the summary.

  Now you can fix it up. Click on the network and make sure that it says Off (bridge mode) I posted my configuration, but you do not follow that... I just allows you to see where everything is.

  

  Click on wireless and fix that up.

  

  You can even click on the base station and correct the name and the master password... so that all the names are short, without spaces and alphanumeric pure.

  NOT RECOMMENDED APPLE NAMES that are FALSE.

  If you have an ipad/iphone the iOS version of the utility is often better to get this right than the Mac version... particularly in the later version of the Mac OS.

• Anyone having problems with the modem from Cox and Time Capsule

  Hello

  Lately my internet falls down every day or every two days with Cox. I have reset the modem, the time capsule, the routers extreme apple, etc. shut down and restart my whole network. I called Cox every two days to refresh the modem.

  I heard that I may need to reconfigure my Time Capsule (acts as a router) to avoid this problem.

  No one knows what to do here?

  Thank you

  Please, try the following:

  Open the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click on the Internet tab at the top of the next window

  Click the Internet Options button at the bottom of the window

  Make sure that the IPv6 configuration is set to Local link only

  Click on save, if you make changes, then click Update at the bottom right of the window

  When Cox fully implements IPv6 (they are not), you may be able to return to the automatic configuration.

• Apple airport time capsule 2 TB HD Wireless with encryption?

  Hello I know that the time capsule is intended for backup and knows he can have external hard drive but I heard that it can be a wireless file server.

  Now, my questions are: 1: what methods are there for this (without hard drive)

  2: is there encryption or some form of protection (password)

  3: is it a good idea for home storage or too far and sending files (I have things I want to store)

  4: and as an internet router it'll work itself flawless

  Thank you

  1: what methods are there for this (without external hard drive)

  The TC may function as a file server... It is not designed for it... but it can.

  You don't need any special method... He is, by nature, a network file server.

  2: is there encryption or some form of protection (password)

  There is password protection of disk... you can also use several names of users and passwords, but if use you it you have to use an empty disk because it completely blocks one user of another.

  Note... There is no protection if someone has physical access to the TC and press reset... any protection blows away at this moment.

  If you want encryption then using an encrypted DMG file. How to create an image (encrypted) disc protected by password - Apple support

  3: is it a good idea for home storage or too far and sending files (I have things I want to store)

  Good idea... Hmmm. compared to what? I have a synology NAS, and it's at least 2 x if it is 3 x faster... It is reliable, it is able to repair, it can save itself,

  TC is not designed for this... it can not save... so all files you use on TC will must be backed up manually or by using a tool such as the CCC... TM doesn't help... It can use the TC as a target, but not source.

  However, it is an inexpensive way in wireless storage... If you're careful.

  You can remotely using the MWAC... only from a Mac so.

  4: and as an internet router it'll work itself flawless

  It's the home router of quality... for some people, it's fine... for others it will not work... apple not allowing complex configurations... who can predict how to find you. As a network, router, there are better support out there. However if you already have an it could work ok.

• Need help to set up Time Capsule with surfboard SBG6580... wifi or extender?

  I just got my Time Capsule and trying to figure out if I should use as my wifi router, or keep my SBG6580 active and e TC allows to extend my warranty.

  Any recommendations?

  In addition, how? Online instructions do not seem to be very clear.

  Thank you!

  I will always recommend to use your Time Capsule as a router, it will be much easier to access and manipulate, unless really, you need to report more coverage.

• need help to set up time capsule as a backup only

  I used Time Capsule as a router wifi and backup for several years.  The wifi didn't give me the whole House coverage so I bought the mesh network eero newly released product. I still want to use my Time Capsule for backup and, as he already has about two years of backup on this subject, I don't want to lose these backups. I created a new network for eero routers but gave the network of the same name and password as the old TC network so that all my devices would automatically connect to the new network.  That has worked well.  Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?  The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

  I also have a desktop Mac that has saved on the TC and it's my main computer.

  Thanks a lot for your help.

  Is it possible to connect the time Capsule to the my wireless network so that my MacBook and MBP my wife will continue to save on the network they were?

  No, you cannot join the TC now network a wireless router not apple. Apple has removed this feature because he was too... too slow, unreliable and missing too many apples.

  The eero router has two Ethernet ports on the back and the two are to be used (one for the modem, the other for Sonos) so I do not have an available port to use.  Can I buy a switch if I have to, but if there is a wireless solution I would rather.

  You can run the TC between eero router and the sonos.

  Connect the wan port on TC eero and Sonos to the TC lan port. Configure the TC in Bridge mode. Disable the wireless sound. (Or you can leave the wireless on but use a different name for your eero wireless now).

  The TC will work like a switch... this side of it will work fine.

  How well the works of TC depends on the OS everything works... You can find it is actually necessary to paginate on the TC to make backups of the laptops wireless. Apple has made changes to the DNS system that broke network so that it can be impossible for computers discover the TC after a few hours after a reboot.

  Give it a try... If this does not work then you need to be more creative.

  The TC can connect through ethernet in the desktop computer. But for this, it must be configured with a different range of IP addresses for the rest of the network. Again, you can use wireless on... but the laptop will have to make backups by a different method. It gets complicated very quickly.

  Tell me what IP range using the eero router?

  I can make a few suggestions more as soon as we clear.

• Cannot move the files, photos at airport Time Capsule

  Hello

  I want to transfer files, photos of my Time Capsule but I don't see anywhere on my macbook. I think that something I messed up when I was put in place at the time of Christmas trees. I'll start from the beginning. Before I bought my time capsule I was connected to the internet through my wireless router, name: GMZ-83313. After that I bought my Time Capsule I set up and connected to the internet. Problem is that I have 2 networks who I can connect it is: GMZ - 83313 and Daniel Wi - Fi network (finally...) I have three really because I started to play with it more and I have network of Wi - Fi for the 3rd networkDaniel 5 GHz ;(

  I just want to add that yesterday I was able to transfer photos from my time capsule and it showed here where you can see GMZ-83313. Yesterday, it was Ant Time Capsule of Daniel it was working fine.

  

  I'm lost please help. I have attached a shot of my airport utility screen:

  

  Click gmz-83313 under the Shared heading in the Finder window

  A folder that represents the Time Capsule... hard drive that is named 'Data', unless you have changed the name... appears in the window on the right

  Double click on data to open the player and install it on the desktop computer

  You can drag and drop the files to the disc on the desktop icon or the open window

• 1102w does not connect correctly to the Airport Extreme Base station (Time Capsule) (wireless)

  & #3; I've been troubleshooting all day on this problem for my parents, trying to set up printing wireless for them on their new HP 1102W. I am trying to connect the printer wireless to their Airport Time Capsule base station. Using the WPS configuration, the printer is recognized by the base station, but I'm still not able to print wirelessly or via airprint. Enter the web configuration via USB, I see that the printer is grateful the network, but it doesn't have an IP address (it is set to auto/DHCP). Later I tried to connect to a shared of my iphone, wifi connection and everything worked perfectly, so the problem is that somehow the printer will not connect properly to the Airport base station. I tried several resets and restarts the printer and the base station, and the printer and the base of the station has new firmware. I also tried to change the security on the terminal of the default wpa2 personal wireless with wpa/wpa2 personal.

  I'd appreciate comments on this issue because I am quite frustrated now :-)

  Using the tool of the airport, I logged on to the base station and changed the wifi settings, while 2.4 and 5 ghz networks have different names instead of identical names standard. That did the trick, eventually I just configured the printer using wps in a few minutes.
  
  Thanks for your help.

• How to restore all the data stored on my Time Capsule airport to my new iPAD Pro

  I have a Macbook air with a backup at a time Capsule from the airport.  The MacBook Air is dead (blue screen).  Now, I have a new iPad Pro and want to restore all the photos that have been saved on the Time Capsule airport to my iPad.  How can I do this?

  Connect the iPad Pro to your computer and sync photos to the iPad Pro.

• can I use airport express to extend the range of my Airport time capsule

  I want my airport express (model 1382) to be subordinated to the time capsule (ver. 7.7.3) and I'm on a different network. Is this possible?

  Do not know what you mean by 'subordinate' here... and you do not specify if the AirPort Express terminal connects to the Capsule using a permanent, wired Ethernet cables... or... If you want to try to have the AirPort Express to connect wireless to the time Capsule.

  The method cable would be far superior to the method wireless in terms of performance and 'slide' on the Time Capsule wireless.

  You also did not indicate what device... a Mac, an iPhone / iPad, etc that you want to use to configure the AirPort Express Terminal.

  So, when we have more information, we can provide you with an accurate answer to your question.

• With the help of Macbook Pro (Mountain Lion): purchased Lightroom 5 Officeworks and, using cards, bought Lightroom 5 serial number to use to download the software successfully. When I click on download, it pours an installer? file for download folded

  I'm running a Mackbook Pro with Mountain Lion. Yesterday, I bought 5 Lightoom stand-alone license map of office work. I created an Adobe ID and followed the instructions and successfully used the code on the card to get my serial number for Lightroom. He then invites me to click on the download button to start downloading the software and a package install presumed is appeared in my downloads folder in the Dock. When I double-click it, I get the following error message: "Download the Package" cannot open the developer's identity cannot be confirmed. How can I get around this? I have to download another program to install the Web page cloud creative and, if so, it will prompt me to enter the serial number LR already achieved? Any help appreciated.

  When I double-click it, I get the following error message: "Download the Package" cannot open the developer's identity cannot be confirmed.

  It's Apple Gatekeeper.

  See How to open the applications of a developer not identified in OS X Lion mountain | IVous

• How can I report a bug to Adobe? (Illustrator crashing Mac when recording to Apple's Time Capsule)

  Hello. I know it's a bug because it affects a large number of users. Basically when you save an Illustrator file (and occasionally a psd) back to an Apple Time Capsule the program freezes. Trying to force out Finder crash too then a hard reboot is required.

  There is a thread on the forum from Apple here: https://discussions.Apple.com/message/17761304?ac_cid=142432#17761304

  However, person or Apple, or Adobe does nothing to solve the problem, so I just want to know how to report this kind of thing to Adobe? I don't have a service plan (and don't think that I should a need either to report this kind of thing).

  Any suggestion is appreciated. Thank you very much.

  https://www.Adobe.com/cfusion/mmForm/index.cfm?name=wishform

  Mylenium