Need help to synchronize between Win 8 Surface

Similar Questions

• Need help to install on win xp SP2, hp 8300 elite raid drivers?

  I spent to win 7 on HP elite 8300 for win xp sp2. I did this because I had to install a specific software that only works on Windows xp sp2. And now I have the problem with the raid drivers. I need help how to install them, and I don't know if I downloaded the right one.

  Maybe the only solution is to insert sort this driver in the instalation of win xp cd because I don't have floppy drive.

  HP elite 8300

  SERIES:[personal information]

  PRODCT NO.: B0F31EA #AKQ

  Hello:

  Please read the info on the link below on how to integrate the SATA/RAID drivers.  Read the Intel section and read the document about how to integrate all the drivers.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-e-g-Windows-8-and-software/SATA-drivers-for-XP-solution-on-0x0000007B-BSOD/m-p/114120#M17758

  The drivers from the link below allows you to integrate. Second listed file is what you need for XP 32 bit.

  http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21730&ProdId=2101&lang=eng&OSVersion=Windows%20XP%20 * & DownloadType=.

  The real driver you need is the controller RAID Intel® Express Chipset SATA Desktop/Workstation/Server. But all by wake.

• Need help with query between 2 dates

  Hello

  I did not SEE in a long time and need help with a simple query.

  I have a table of DB access with 3 fields, name, date and number

  What I want is to create a query to retrieve all the names between 2 dates

  When I ask the date field, the results are showing in this formats 2013-07-12 00:00:00

  Here's my query

  < cfquery datasource = 'mydb' name = 'test' >

  SELECT name from myTable

  where edate between ' 2011-01-01 00:00:00 ' AND ' 2013-01-01 00:00:00 '

  < / cfquery >

  < cfoutput query = 'test' >

  #name #.

  < / cfoutput >

  What I get is this error

  ODBC = 22005 (assignment error) error code

  [Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.

  Don't know what I'm doing wrong here.

  Please let me know.

  Thank you

  SELECT ename

  FROM MyTable

  WHERE edate BETWEEN

  AND

  #ename #.

• Back up the server: need help with synchronization of Microsoft.

  At work, we have a server lets just say its called \\backupsrv and we have My Documents of each user directed their C drive to the backup to the backup server. We also had to each user and with them logged in we ensure that their documents point to the \\backupsrv and we go to my computer\tools\folder options and click to activate offline files and synchronize with log off. Finally, we right-click on users my doc folder and select make available offline.

  The problem we see is that when we look at our network in a program called Orion that shows us how our network is used and time when most bandwidth is used. We notice on certain PC, it syncs when some users log on in the morning. Who uses a lot of bandwidth since it's synchronize users my docs for the backup server when is this. The majority of users is another branch and their my sync docs for the backup of the server that is on the road to the main branch. We checked these PC users and they are set to synchronize when you sign off the coast. Anyone else have problems with Micrsoft synchronization over a network? The operating system that we use on the PC is WinXP SP3

  Hi valley_girl1919,

  I would recommend posting your question on the TechNet Forums as they specialize in supporting the professionals:

  http://social.technet.Microsoft.com/forums/en-us/categories/

  Thank you for answers!

• Need help to choose between Streaming &amp; Interactive Server

  Hi all

  We are the Windows Media to Flash Media Server server migration and so I need advice. Here are my requirements:

  1. Be able to deliver videos in playlists. For example: Insertion of ads before the main video
  2. Restrict access to certain videos will be available for only paid customers
  3. Be able to create applications where users can upload their own videos. I guess that this requires that the server of the company. However, this requirement is not critical.

  Another tip for the first time is more than welcome. Thank you for taking the time to read this post.

  Thank you

  Mushtaq

  You will need the interactive version of create playlists on the server side. Your other option is to get the streaming version and create a playlist in an XML file (for example), which supported the client-side custom player video (you need to have this done) and go from there.

  To create a playlist that automatically runs as TV and people just "connect" each time, you need to use good FMIS. I don't see why you need the Enterprise version, so you don't have to buy.

• Need help to synchronize the pre-production and production box init parameter

  Hello
  
  I have a HP - UX 11i production database. The database is the CARS with 3 instances. The storage is on ASM. Recently, we have created a database of pre-production for tests on RedHat Linux 4 worm. Here are the details of the environment 2:
  
  Production: HP - UX 11i, 24 GB of RAM, 8 CPU, Oracle 10g R2
  
  Pre-production: RED HAT ver 4, 16 GB RAM, 4 CPUS, Oracle 10 g R2
  
  Basically everything in creation the two environment are not identical configuration. Now, I need to bring to the pre-production environment in harmony with the environment of Production from the point of view oracle init parameter. I have listed down below below the parameters that is different. Please tell me how many of these parameters can be bring in sync. Setting shmmax doesn't set on the two core area is 4 GB.
  
  Name of the parameter of V$, value on Production - value on the pre-production
  -----------------------------------------------------------------------------------------------------
  cpu_count----------------------------------8-------------------------------------     4
  CURSOR_SHARING - EXACT - FORCE
  db_recovery_file_dest_size - 32212254720 - 15032385536
  dml_locks----------------------------------1472----------------------------------748
  fast_start_parallel_rollback - LOW - FALSE
  filesystemio_options - asynch - no
  LARGE_POOL_SIZE - 33554432 - 0
  log_buffer - 14493696 - 7012352
  log_checkpoints_to_alert - TRUE - FALSE
  open_cursors - 1000 - 300
  parallel_execution_message_size - 2152 - 2148
  PARALLEL_MAX_SERVERS - 160-80
  pga_aggregate_target - 2147483648 - 1692401664
  processes----------------------------------     300-----------------------------------150
  session_cached_cursors - 100-20
  sessions------------------------------------     335-----------------------------------170
  SGA_MAX_SIZE - 5368709120 - 675282944
  SGA_TARGET - 3221225472 - 675282944
  sql92_security - FALSE - TRUE
  standby_file_management - MANUAL - AUTO
  transactions - 368-187
  UNDO_RETENTION - 10800 - 1800
  
  Thank you

  NOTE: You must be a query V$ PARAMETER ISDEFAULT = "FALSE" only to identify the paraemters which are or have to be defined.
  You must identify these paraemters which are explicitly defined by the DBA, rather automatically determined by Oracle.

  1. you do not explicitly set or change cpu_count. Let Oracle automatically set it based on the number of processors / cores he sees as being available. (if you have multiple instances of database on the same server, each instance will 'see' the same number of processors / cores)

  2 cursor_sharing must always be the same development, pre-production and Production. However, I would first of all ask allows you to determine why it has been set by the dint of Production. That must be done only after careful consideration and test!

  3 db_recovery_dest_file size is relevant for backups RMAN identified by db_recovery_dest disk space. If it is not relevant to this discussion.

  4 dml_locks, sessions, transactions, etc. are all automatically determined by Oracle based on the PROCESS.

  5 fast_start_parallel_rollback is irrelevant. I wonder why it has been explicitly defined?

  6 filesystemio_options really depends on your platform. HP - UX 11i and Redhat Linux are very different.

  7 are defined explicitly large_pool_size and log_buffer? Or they remain to be determined automatically by Oracle based on other parameters (SGA_TARGET for example)?

  8 open_cursors, generally not be set unless you have an application that really opens up very many cursors by session. Why is defined differently? It is a per session setting.

  9. I suppose that parallel_max_servers is not explicitly defined, but remains to be determined by Oracle based on other parameters (for example cpu_count).

  10. I wonder if parallel_execution_message_size has been explicitly defined or is automatically defined by Oracle and OS dependent.

  11 pga_aggregate_target would have explicitly set the appropriate value based on your hardware and its use must be determined.

  12 session_cached_cursors generally didn't need to be explicitly defined. If it is set, why he is set on these different values?

  13. Why is SQL92_SECURITY explicitly different?

  14 standby_file_management is not relevant here.

  15 undo_retention could be about the same.

  Your REAL concern should be the values defined for CURSOR_SHARING and SQL92_SECURITY. These are the only ones who are really identical in both environments. The others are "setting buttons" while these "fix"behavior ".

  Hemant K Collette

• Need help to synchronize video clips and main audio

  I have 20 videos (symbols of the library) from about 400-800 views each. None has its own audio. I want to play in sequence on the main timeline, synchronized to an audio clip that runs along the timeline. The problem is that I can not understand how to stop the timeline to allow the clips to play uninterrupted audio.
  
  At the present time, I have clips play in sequence, I like: each clip on the timeline has a label and occupies 10 images, just so that I can read the labels. The last frame of each clip on the main timeline, I have a stop() on an Actions layer command. The last frame of each MC, I have a command that looks like _root.gotoAndPlay ("nextLabelName").
  
  The problem is the audio on the main timeline plays only for these 10 images, then stops to let each MC to play, which is exactly what I told it to do. How can I get audio from the main to continue scenario to play and keep that it synced to the sequence of MCs? Perhaps, I go about it the wrong way.

  OK, I think I've answered my own question. After some more research in some newsgroups, I found a useful code. Here's what I did, in case someone else has this problem:

  (1) kept just as it was, but removed the audio clip on the main timeline.
  (2) in the library, I went in the binding of the audio settings and he gave a C:\myaudio identifier.
  (3) created a new MC with 1 single framework, in which I inserted this code:
  SND = new Sound (this);
  snd.attachSound ("C:\myaudio");
  SND. Start();
  (4) in the main timeline, I inserted a keyframe, where I wanted the audio to start and drag the new MC to the editing table, off the stage.

  Now the clips play in sequence, the audio plays all the way through, and everything is synchronized. You would think there would be a simpler way to do it... but you would be wrong.

• Win XP and Win 7 formatting issues! PLEASE, NEED HELP AS SOON AS POSSIBLE THANK YOU!

  OK, I made the mistake to download Win 7 Ultimate and install it on my Dell on XP. Bad idea. It could not pass the Windows Genuine Advantage, that it crashed and do not reboot Windows 7. I ran my backup on Win XP with SP3, install (XP) under C:\WINDOWS.old and kept the Win 7 files that I needed, my personal documents. Win 7 was in C:\Windows. I had my documents Ok, but how do I get rid of Win 7 files? Format? There is no dual boot option, such as Win 7 crashed my Dell and are basically sitting there too much space. I ran XP after installing 7. If I format, it will have negative effects on my computer? If it screws with my Dell somehow? ANSWER PLEASE THANK YOU SOON VERY IMPORTANT!

  System information:

  Dell OptiPlex GX280

  32 GB hard drive

  512 MB of RAM

  Operating system: Win XP with SP3. I want to get rid of Win 7 files.

  PLEASE PLEASE PLEASE RESPOND AS QUICKLY AS POSSIBLE, IT IS VERY IMPORTANT! PLEASE AND THANK YOU VERY MUCH!

  Asked and answered already in the other thread, you did in the forum Hardware & drivers here:

  http://social.answers.Microsoft.com/forums/en-us/xphardware/thread/995bd013-A458-4B3A-A546-e113187ff934

  Please, do not separate posts on the same subject. It's just more work for people who are trying to help you.

  MS - MVP - Elephant Boy computers - don't panic!

• Windows 8.1 annihilated all win, Pro 7. CANCEL the need help!

  Reference Dell Inspiration 3847

  First, I created a new partition and thought that when I pick up the Windows 8.1 since the disc that came with the new computer, it would be a side-by-side, double installation along the side of the factory, preinstalled, Windows 7 Pro. EVIL!

  What has happened is that it exceeds written Win. 7 pro. and remove all it's files and preloaded apps.
  I sent to Dell to see if I can return to the configuration factory state condition with the Win 7 Pro. and applications pre installed. but have not yet received a response.
  I, ve tried restoring to factory State, but she is instructing me to reinstall Win. 8.1 from the disk.
  NEED HELP!
  Thanks Randy

  You should have the recovery with Dell backup and restore support before making a dual boot. Even if he succeeded he would have hindered your ability to restore to the original image.

  You cannot reinstall Windows 7 because Microsoft has removed all downloads of Digital River and replace them with a non-functional tool that licenses OEM Dell blocks and you cannot create a support of recovery, your only choice is to call Technical Support Dell or Windows 8.1 installs successfully.

• Need help configuration IOS IPsec to enable communication between the VPN client

  Hi, I need help with the configuration of IPsec VPN router 2811. I want to allow communication between VPN clients, is that possible? I know that ASA, you can do this by using the command "permit same-security-traffic intra-interface".

  The fact is that each Client IP communicator installed, but when they tried to call each other, he failed. I guess that's because the connectivity between them is not permitted because of the VPN connection.

  Thanks in advance...

  Hello

  Try this: -.

  local pool IP 192.168.1.1 ippool 192.168.1.5

  access-list 1 permit host 192.168.1.2< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit host 192.168.1.3< vpn="" ip="" addr="" of="" client="">

  access-list 1 permit 10.10.10.0 0.0.0.255

  < lan="" behind="" the="">

  ISAKMP crypto client configuration group vpnclient

  key cisco123

  ACL 1< binding="" the="" acl="">

  !

  --------Done-------------

  If you do NAT on the router then you might want to exempt your VPN traffic to be NAt had

  Assuming that the NAT of your router is

  overload of IP nat inside source list 111 interface FastEthernet1/0

  !

  ! - The access list is used to specify which traffic

  ! - must be translated to the outside Internet.

  access-list 111 deny ip 10.10.10.0 0.0.0.255 192.168.1.0 0.0.0.255

  access-list 111 deny ip 192.168.1.0 0.0.0.255 192.168.1.0 0.0.0.255

  Above two statements are exempt from nat traffic.

  access-list 111 allow ip 10.10.10.0 0.0.0.255 any<, permits="">

  I would like to know if it worked for you.

  Concerning

  M

• My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  My HP Photosmart 7660 printer does not work with Win 7 Ultimate. Need help, where can I get the right driver?

  Visit the HP website and look.

• Need help with Ora-00001: constraint Unique voilated in catalog synchronization

  Hi Experts...

  Has got some problem in the catalog... desperately need help...

  Oracle: 11 GR 2

  Here is a detail of the error.

  from full resynchronization of the recovery catalog

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03009: failure of command resync to the default channel on 26/11/2013 18:01:34

  ORA-01403: no data found

  ORA-00001: unique constraint (DNKF_GRIP. BRL_U1) violated

  ========================++++++++++++++++=========================

  Kind regards

  Hei,

  Cool... I have also encountered this kind of error long back... Follow and fortunately we it will be solved.

  A problem with the constraint or the Index after the upgrade of the catalogue in 11 GR 2

  Remove the constraint, if available, otherwise check index, if found the drop... Rest is history...

  First, check the BRL_U1... It can be constrained or an index on the catalog database.

  May be it's problem... the compulsion was abandoned during the catalog migration process, but the corresponding index has not been abandoned.

  The catalog DB:

  -Removal of the index

  SQL > connect rman.

  SQL > select * from user_constraints where constraint_name = "BRL_U1";

  SQL > select * from user_indexes where index_name = "BRL_U1";

  SQL > drop index BRL_U1;

  Once it will be deposited now connect to the production database to connect to the catalog and re-synchronize... It should work like that...

  RMAN target / catalog rman/password@catalog_db_name

  RMAN > catalog resync;

  from full resynchronization of the recovery catalog

  full complete Resync

  RMAN > exit

  ======================================

  Kind regards

  Firdous Shah

• Synchronization between PCI - 6251 / PCI - 7811R

  Hello

  I need to synchronize two card PCI, PCI - 6251 / PCI - 7811R. This is my first time with a huge app, and I don't know where I should start.

  PCI - 6251 I connected SCXI - 1001, (in chassis: SCXI-1161,-1326,-1327,-1125,-1324) and I'll use it for measurements. Through the PCI - 7811R I want to communicate using the JTAG Protocol, SPI and meaby measure PWM signals. I'm not sure that anything is possible.

  Please help me or give me some tips where I can find some examples.

  Kind regards

  __behemot_

  Hi __behemot_,

  First synchronization between these two modules can be done thanks to the RTSI, the easiest way bus. The two modules must RTSI connector, so no problem should be there. You can find useful information on the RTSI bus on the following link:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/4322

  Also search NI example Finder on RTSI, you will find beautiful examples.

  Concerning the programming of FPGA section, the following links are of course useful when it comes to digital Communication Interfaces and PWM on FPGA:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/5385

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/4725

  Please also check the NOR example Finder (easier to find in LabVIEW is the Help menu): in search for a selected tab Toolkits and Modules--> FPGA--> series a. here you can find a lot of examples that may be useful to start.

  Let us know if you need anything else!

  Best regards

  David Varga

  Technical sales engineer

  NIH

• What is the relationship of synchronization between the input MUX and the clock to convert DAQmx

  My application requires both long settling for the analog input.  I can slow down the clock to convert in order to increase the interval without but I would like to learn more about the internal synchronization and synchronization between the switching of input MUX and the clock to convert.  Data acquisition is USB-6225.

  Thank you

  Neville

  wet'nwild,

  You have reason in the observation that hold all the impulses of the event happening 180ns after convert rising edge clock, regardless of the period of the clock to convert.

  This is the process:

  1. the clock Convert generates an impulse to start the ADC conversion.

  2. a period of time (in your case, 180ns) after the clock pulse to convert, the complete signal hold impulses. This indicates that the data are "required" by the Active Directory Connector. It is now OK for the MUX switch to the next channel. It is important to note that the ADC conversion is not complete when the pulse hold full occurs.

  3. at this stage, the MUX will pass and the device will wait for the next clock pulse to convert for the start of the next conversion.

  In summary, this means that when you change the period to convert clock signal, the complete signal hold flashed always the same fixed amount of time after the edge of signal clock convert. The complete signal Hold'em is not a good indicator of break-in; the width of the period to convert clock must be waiting time indicator (which looks you determined you're previous posts). A good application for the signal keep complete would be for an application where there is an external multiplexer and the multiplexer needs a signal indicating that it is OK to switch the inputs.

  I hope that helps clear up any uncertainty that you have about how it works!

  Kind regards

  Aaron

• Questions about the synchronization between output and analog input

  Hi all

  I now have a simple task which head a signal voltage (from PXI ao0) on a circuit and then your comments a voltage at the terminals of a component, for example, that one of the resistors in the circuit, through ai0 on PXI. So in this case, the synchronization between analog input and analog output must be made to avoid error of phase shift.

  I tried to build my VI by learning this example: https://decibel.ni.com/content/docs/DOC-3882

  However I have a few questions.

  1. I noticed that there is a merged error fed the "start task" sub VI for the analog output.  What is the point of fusion to mistake?

  2. I enclose my VI (also shown below) for the output voltage. I put my writing of DAQmx Subvi in the while loop so that I can change the voltage while the VI is running.

  

  However, in the example, the author has been reading outside of the loop and before even the start task. What difference will it make?

  3. I have also attached my synchronized VI. I always put the wavegeneration and the DAQmxwrite in the loop. A bulging guard error saying about samples is not available and needs to a higher sampling rate or a longer wait time. What causes this?

  I appreciate that these problems can be solved. Thanks to you all.

  (1) first you need start the task of acquiring, he'll wait for trigger here. And then you start the build task that provides this trigger. If acquisition could trigger and never start.

  (3) you must first write something in the buffer (writing DAQmx), then only you can generate it (Daqmx Start).

  Check Cont Gen tension Wfm - Int Clk - no Regeneration.vi in the help-> examples for example.