. Need help vista problem

Similar Questions

• Need help with problems of performance with 14 elements

  I scanned the forums and provided below to help with feedback. At this point, the organizer of the elements is unusable for me - I'm looking for suggestions to help refine the installer to make it usable.

  MY SETUP

  • Just more than 50000 items in the catalog, about 95% of them are photos, videos of rest. 98% of the source files are on a drive to the server in my house, with a gigabit connection.
  • I left full recognition of faces (took two days!) and Yes, during that who was running the organizer was unusable.
  • My PC is an i7 - 4790 k with 16 GB of RAM. Windows Pro 10. Boot drive is SSD.

  THE SCENARIO

  I have a new series of images on my C drive local - images that I scanned, about 30 pictures. Using the view of the pane left records that I navigate to the folder on my C drive. If I move to the tab places it takes about 25 seconds to react and make enforcement appear the places page. If I then go to the people tab it takes about 75 seconds, for the application to respond. In both cases, the application is completely insensitive during the wait.

  Clearly, I can't clean my collection with this kind of response. So here are my questions:

  1. What are the key strategies to improve performance, given my configuration?
  2. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  3. Broken content is to catalog help with questions like this? Is there another internal setting, I should be updated or change?
  4. Given the number of images should I use Lightroom instead?

  The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

  Thanks to everyone for their help.

  Mark

  mgill2012 wrote:

  .........

  Thanks to everyone for their help.

  Mark

  Mark,

  I can't offer a positive solution to your problem, but I hope to give you some answers or thoughts on this subject.

  Let's start with the description of your case: it's a perfect description of what has been reported in several positions:

  -powerful Installer (computer, SSD)

  -l' use of the recognition of people and/or geolocation

  -use of a NAS for the library.

  -Library of more than 50,000 points.

  -very long indexing, then extremely slow.

  I do not use a SSD (will probably later) or a NAS (I never do). I 65 000 objects and don't care about recognition of face or geolocation, which explains that with a basic setup on I3, 8 GB of RAM, I have an organizing extremely fast speed. Even on an old secondary computer with Vista, it is still quite manageable.

  Your choice is typical of advanced specialists and competent (I guess that less than 1% of the current user of items based). I have yet to see no answer (satisfactory or not...) Adobe staff.

  Given the number of images should I use Lightroom instead?

  I guess that's what Adobe could answer you... and that would be wise. You can use a trial version to make your choice and do a search on the forum for Lightroom. I have not seen similar, even if complaints with NASs, it seems to be a lot to say. Lightroom can convert your organizing catalogs (maybe some problems lately...)

  The only change that I'm not going to do is to move all the content of my return to my local drive. Sound on the server so that it is completely backed up and protected. So I'm looking for ideas that help given this configuration.

  If the use of the network is primarily to ensure maximum security (for not sharing images), why not would you use the choice to store your library on your computer (internal or external disk) with a sync to your NAS as a backup solution? I can tell you that my workflow includes Windows Synctoy to record each session easily and quickly (catalogs and libraries).

  Your very precise description of the case call to assess each factor of different performance individually. Even if the method above is not the final answer, it could shed light on the influence of the use of the network.

  1. Have I not too many objects in the catalog? Should I aim lower number? I saw that there is no actual limit but I feel Im beyond a theoretical limit of messages.
  2. Broken content is to catalog help with questions like this?

  Splitting the catalog is usually a very bad solution, a number of post seems to show that with the recognition of the people/geotagging, the problems around the range of 50,000 points. You can make a copy of the catalog and remove half of the files to check the influence of numbers point; Maybe it's possible with version 14 (deletion is extremely slow, but worked for me, even if it failed with older versions).

  Is there another internal setting, I should be updated or change?

  Sorry, I can't help you there...

  Other factors are using recognition Geotagging and people. Even if you absolutely need those features, disable to see their influence could help Adobe to solve performance issues.

• Need help with problems after you download Service Pack 2 for Windows XP Home Edition

  I downloaded the havce to uninstall Service Pack 2 only because when I rebooted the computer system has 4-bit color without the possibility to change and everything was HUGE. I need to have installed so I can play Sims and get the rest of the windows downloads. I can't do anything until this issue is resolved. Has anyone else has this problem? I'm working on a new hard drive (180 MB) and I don't know if I need to update the drivers that came with my gateway first, before I can install SP2 correctly. Please someone can help me I got appriciate it! Thanks in advance! If you have any other questions I can answer.

  ~ * Heather * ~.

  aka

  ~ * Slicky * ~.

  If you get just to install WinXP SP2 for the first time ever, keep reading. If not, tell us why you need to reinstall SP2.

  ==================================

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the appropriate removal tool before installing updates, Service Packs Windows or IE upgrades and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Urgent: need help on problems on the iPhone after updating iOS 10 6s

  Hey there! It's my third post about the problems Ive been face on my devices after 10 updated iOS. Initially, after that I've updated, the music app was not running on my phone-all I could see was an empty screen and the APP crashed and I was redirected to the homepage in a few seconds. Tired to restart the phone, deleting and then adding the app back, nothing worked. Not at all. So I tried to restore my phone, save all content via icloud. Followed all the steps and after the restoration of the aircraft of other problems surfaced, BUT the music app still does not work.

  Now, not only the app does not work, I can no longer sync my iPhone with iTunes. Whenever I try, I get the following errors:

  (1) itunes cannot sync the iPhone connection has been reset

  (2) iTunes sync session could start.

  IF PLEASE NOTE, BEFOR RESTORE IPHONE I COULD ALWAYS SYNCHRONIZE WITH ITUNES EVEN AFTER IOS UPDATE 10 AND TRANSFER THE MUSIC ETC, BUT JUST COULDN'T NOT OPEN MUSIC APP TO PHONE-NOW I CAN'T DO EITHER!

  I have tried pretty much everything, restart both phone & iTunes, reset the network settings on my iphone, reset itunes sync history, by removing the lockdown folder, running iTunes as administrator on my PC, change my USB in corduroy, update iTunes, reinstall iTunes on PC-nothing seems to work AT ALL. And it's extremely frustrating. I can sync music/documents on my iPad after update of the device and the restaurant then (iPad also has major problems) and then play the music on it but just isn't my phone can be synchronized. It is a function important and if I can't synchronize my device is a sitting duck.

  The new update of iOS also gave my massive lag of phone. Screen freezes, apps for time-consuming, HDR photos take longer to be broken. It is just too heavy to wear.

  CCAN anyone help me please with my iTunes sync + music matters app... I really regret updating to the new iOS. Please help me.

  Thank you.

  PS apologies for this long post, I had to write everything I tried.

  If you are on Windows, uninstall iTunes, uninstall Apple Mobile Device Support. Once both are uninstalled, reinstall itunes, see if it syncs with itunes then.

• Need help with problems upgrade memory on Pavilion DM4

  I have a Pavilion DM4 1201us with original DDR3 2x2gb memory cards.

  I bought a pair of Corsair DDR3 1333 Mhz 4 GB memory cards.

  I have the latest BIOS (F.27) and I'm running the OEM Windows 7 Home Premium 64 - Bit. SP1.

  The BIOS recognizes the 8 Gb and when I run the BIOS memory test it runs without error.

  When I try to boot Win7, it gets somewhere before the logon screen and makes a BSOD with a message about a new memory being installed.

  I went back the Corsair Memory cards, but you need to know if there is a problem with any upgrade up to 8 GB of memory with my particular setup. HP offers an upgrade to 8 GB with the same spec boards. (I'm beyond the warranty period!)

  Any thoughtts?

  Interesting!

  I can tell you that the model only supports 8 GB memory: http://support.hp.com/us-en/document/c02704310

  Have you tried more than one kit of 8 GB?

  The reason why I ask is with memory DDR sometimes reticular sticks will pass all the tests if the two sticks are installed then a stick could be bad without you knowledge.

  Also you tried a bar of 4 GB and a 2 GB stick to see how it worked?

• Need help with problems blue screen with drivers for IOGEAR GUWAVKIT

  I try to install the Iogear Wireless USB to VGA on a Windows 7 laptop.

  I downloaded the latest version of the software driver from the Iogear website.

  The Manager application loads fine, but when Windows 7 tries to install the driver for the USB host card, I get an error on blue screen windows and restart the computer.

  The physical hardware for the GUWAVKIT works very well on a laptop 32 bit Vista.

  Has anyone met and solved this problem?

  Thanks in advance

  Ken

  According to their website, the win7 drivers are beta drivers, published in March 2010

  Have you tried Vista, relevant drivers for your version of bit of victory?

• Need help with problems of memory on Dell Inspiron 1750, Windows 7

  Replaced the hard drive on my laptop.  I am a woman trying to do it on my own to save money.  When you perform tests on pc, message received "Advanced Pattern Test" failed.  Would it because I made a mistake of downloading drivers, etc.?

  THANK YOU VERY MUCH for any help you can give me.  I am a senior on a limited income and cannot afford a professional.

  The prayer that I can understand the problem and fix it myself.

  Be blessed!

  meandmya,

  Restart the computer and run the full diagnostics, press F12 at startup. Report error messages.

  You have the OEM Dell operating system disk?

  What the Dell drivers disk?

  Rick

• Need help, a problem with IPSec and NAT - T

  We had a successful between a Cisco remote access client and the ASA connection.   The connection is more data transfer, but the Phase I and Phase II complete successfully.   There are several sections between separate networks for the remote user to the ASA, including hotlines of Verizon and Verizon's ISP.

  Troubleshooting Cisco guides strongly suggests, it is a problem of NAT - T, but when I turn on debugging 254 isakmp and debug ipsec 254, I get only a modest messages on NAT - T, which is "Recieved NAT-Traversal version 02 VID.   This message and connections, are when I disabled it on the ASA of NAT - T.

  If I enable NAT - T on the SAA, the remote client cannot establish Phase I or II; I was not able to gather debugs on this scenerio yet.

  The customer has a second laptop, both of them experience the same problem.  We have ensured that the Tunneling, UPD 4500 is activated.

  I suspect that an intermediary device or Verizon, changed something.

  What should be my next troubleshooting (unfortunately, I can't post the configs)?

  Kind regards

  j

  From my very limited experience, both sides must have the NAT - T enabled, otherwise the side who did not need NAT - t won't be able to read the part of the IP header because it is encrypted.

  Good luck!

  Pedro

• (need help) wireless problem...

  Hello guys... I'm new here... OK, that's my problem, and I hope that you guys can help me...

  yesterday, I received a new computer laptop lenovo x100e, its happened with windows 7 starter... but now I have upgraded to windows 7 ultimate... the problem is, I can't access the network using wireless... my driver name is express 11 11 b/g/n wireless LAN Mini-pci adapter...

  I hope someone can help me...

  Thank you

  Fatou

  Here is the driver http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-73701

• Need help: design problem

  Hi refugees,

  I'm new to OFA,

  I am facing problem with page design I have to display the list of options on the left and based on the selection, see the box above right more like

  in the list of EBS responsibilities and the corrosponding to the menu at the top right of most...

  I tried to understand the homepage, but I did not understand... Please... help me on this... What are the areas I have to choose...?

  Kind regards

  Jaya

  What is the error you get?

  Sushant-

• Need help with problems of Menu Spry/SSI

  Let me say that this is the first time I tried to create a SSI. In this case, I am using a spry menu as a SSI, so I can easily update the links.

  I used http://foundationphp.com/tutorials/sprymenu/ssi.php as the point of jumping and even managed to create a base to http://avios.org/sandbox/. I was happy, and it seemed simple enough (Incidentally, there is a photo of penguins on the test page). However, when I tried to impliment the same type of menu system in a part of the Web site (in a sandbox area), everything I came with was ' [year error occurred while processing this directive]. " I can't understand what the problem is. The sandbox site is (please don't mind how messy the code of the actual page, it was made before that I really knew nothing about CSS): http://avios.org/sandbox/australia/

  The Organization of the file looks like the following:

  Australia

  build (my generation folder)
  CSS

  includes

  resources (photos for the site)

  SpryAssets

  all the shtml files (i.e. index.shtml, etc...)

  My call to the header of page link:

  < script src = "SpryAssets/SpryMenuBar.js" type = "text/javascript" > < / script > "

  < link href = "SpryAssets/SpryMenuBarHorizontal.css" rel = "stylesheet" type = "text/css" / > "

  My call on the page for the ISS menu:

  <!-file = "includes/menu_aus.shtml #include" - > "

  Any help would be appreciated. Thank you!

  Try changing the virtual file include statement.

  Change this:

  [an error occurred while processing the directive]

  to do this:

  [an error occurred while processing the directive]

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

• Need help with problem when implementing IPC with JPF portlet (WLP 10.3.2)

  Hi all.
  I implemented the CPI between 2 flow of the Page Java portlets (local IPC) training in certain pages:
  [Establishing the IPC by using custom and Page Flow events | http://download.oracle.com/docs/cd/E13218_01/wlp/docs81/ipcguide/custevent.html]
  [An example Simple of IPC establishing | http://download.oracle.com/docs/cd/E13218_01/wlp/docs81/ipcguide/howworks.html#1000903]
  [Portal Federation with WebLogic Portal WRSP: Advanced IPC Techniques | http://www.developer.com/lang/article.php/3749366/Portal-Federation-with-WebLogic-Portal-WRSP-Advanced-IPC-Techniques.htm]
  
  But I'm dealing with a strange error. Here is the error in the console:
  

  <Oct 27, 2010 9:59:15 AM ICT> <Error> <netuix> <BEA-423330> <The method [ saysomething ] was not found in the backing class [ backing.InputBacking ].> 

  My scenario is: display portlet must listen to the events that will be drawn from entry portlet then display them.
  In InputController.portlet, I have a code:
  
  + < netuix:portlet backingFile = 'backing. InputBacking"definitionLabel ="InputController"title ="Input"> +.
  + < netuix:handleCustomEvent = "customEvent" eventLabel = "handleCustomEvent1" + event
  fromSelfInstanceOnly = "false" onlyIfDisplayed = "false" sourceDefinitionWildcard = "any" >
  + < netuix:invokeBackingFileMethod method = "saysomething" / > +.
  + < / netuix:handleCustomEvent > +.
  
  + < netuix:handlePageFlowEvent action = "customEvent" eventLabel = "handlePageFlowEvent1" +.
  fromSelfInstanceOnly = "false" onlyIfDisplayed = "true" sourceDefinitionWildcard = "any" >
  + < netuix:invokePageFlowAction action = "submit" / > +.
  + < / netuix:handlePageFlowEvent > +.
  
  + < netuix: content > +.
  + < netuix:pageflowContent contentUri="/input_portlet/input/InputController.jpf"/ > +.
  + < / netuix: content > +.
  + < / netuix:portlet > +.
  
  And it comes to codesnippet in InputBacking.java
  
  
  + / public class InputBacking extends AbstractJspBacking {+
  
  + public private static final long serialVersionUID = 1 L; +
  
  + ' public Sub pushInput (HttpServletResponse response HttpServletRequest request, Event event) {+
  + Setting PortletBackingContext = PortletBackingContext.getPortletBackingContext (request); +
  + String msg = (String) request.getParameter (context.getInstanceLabel () + "{actionForm.input}" "") +;
  + context.fireCustomEvent ("customEvent", msg); +
  +     }+
  + ' public Sub saysomething (HttpServletResponse response HttpServletRequest request, Event event) {+
  + System.out.println("*** Hello, this is a set point ***"); +
  +     }+
  +}+
  
  
  I don't know why pageflow impossible dectet my method? Someone help me?
  
  Kind regards.
  Doubt_Man
  
  Published by: Doubt_Man on October 27, 2010 11:09
  
  Published by: Doubt_Man on October 27, 2010 11:52

  Hello

  You get the error message indicates that the portal framework cannot find the method with the signature of method appropriate to your backup file. You have the correct name of the method, but the portal framework is not to find a method with the correct (in the right order) arguments when using reflection to examine your backup file.

  If you change the method signature to the order of the required arguments:

  void saysomething(HttpServletRequest request, HttpServletResponse response, Event event)
  

  the framework needs to properly run your method of backup file when the event is received. The fact that you get the error message indicates that other configurations AutoEventWireup for the event works; He can just find the right method in your backup file to finally deliver the event to.

  Kevin

• Need help with problem: KB2518864 and KB2572073 several times trying to install/link id 212828

  I use Windows XP and this is the first time that refuse 2 updates to install. Hope someone can help me. I am a retired and not particularly technical oriented.

  See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• I NEED HELP! Problems of load :(

  Hey,.

  I was wondering why my new sansa fuse not charging,

  I've heard something that he can be due to the fact that I used the battery.

  is there anyway that you guys could help out me.

  Thank you

  have you tried to connect to the port back if this does not work try different computers

  or try using a wall charger sell it cheap on ebay

• need help with problem of mobsync

  someone knows a solution to prevent the execution of mobsync.exe?
  I tried

  • disable the file offlines
  • Edit the registry to 0 of 1 (hkey_local_machine\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Publishers\) {b44aec44-38f4 - b 4, 59-8 df3-10306abf19b2
  • using the DisableMobsync.exe ( http://reliancepc.com/menu/tips/mobsync/ )
  • refuse permission for the file using security
  • Rename or delete ( http://www.eggheadcafe.com/community/aspnet/15/10078534/solution-to-preventing-mo.aspx )

  OS: vista ultimate 64 bit

  Hello zizou.

  Thank you for using the Microsoft Answers forum.  Connect your mobile device.   Click Start > Control Panel > Classic view > administrative tools > Services.  Scroll and select Windows Mobile connectivity.  In startup type, select Disable.  There are two Windows Mobile connectivity services.  Disable both.

  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.