I NEED HELP! Problems of load :(

Hey,.

I was wondering why my new sansa fuse not charging,

I've heard something that he can be due to the fact that I used the battery.

is there anyway that you guys could help out me.

Thank you

have you tried to connect to the port back if this does not work try different computers

or try using a wall charger sell it cheap on ebay

Tags: SanDisk Sansa

Similar Questions

Need help - problem with the installation of the Office

I really hope that someone can help as I have spent HOURS trying to solve this thing with Palm Desktop (DP). My family lives and breathes out of this Palm.

First of all, I have a Palm Treo phone for half of the year, but a user palm for 4-5 years. I used Datebk6 with absolutely no problem. About three months ago my phone got wet and shorted dirty keyboard. I ordered a new keyboard, installed, and everything was fine. Not sure if this is related, but mentioning the bears.

Then a few weeks, something has happened. I'm not sure if I've updated something or another user of the computer in the House has done something. Palm desktop, account opening, two icons on the left side of "Palm Desktop" - media and install. No calendar, notes, tasks, all functions that I use. I couldn't print calendars more.

So first, I uninstalled the Democratic Party amd reinstalled the period off the drive. The Democratic Party looked decent with a calendar, etc., but this version had the "quick installation". When I installed the version on the net which solves the problem of Vista 6.2.2 he placed all my third party apps in an incompatible "apps" folder and the Democratic Party shows install yet once just the icons and media. Once again, no calendar, tasks, memos. However, the phone and its applications still worked OK, everything was there - then...

I thought that maybe the problem is hotsync during initial installation, so I reset the phone to the original factory settings (erased). Distributed with uninstall and reinstall and it happened again. DARM duration with just the media and install it. No option to open an archive. Previous versions the Democrats have the calendar etc, but of course now without any data. Version 6.2.2 has no calendar, tasks, todo etc.

I need help. someone at - it suggestions? Where can I go? I need this problem.

maramac - check if the UAC has been reactivated (User Account Control). I read in other posts that these latest Windows updates have reactivated UAC on PC of some people of.

This could also cause the problem you are experiencing.

Control user/accounts/Turn User Account Control OFF.

WyreNut

Need help with SQL Loader

I have a third-party site that transforms the information into a csv summary. I can't change the format, and they are not ready to give directly from db and db, so I try and then import it. I'm trying to use SQL Loader, but I can't seem to make it work. I looked in the documentation (VERY rare examples) as well as several websites and I can't find anything that can help out me.

Control file:

LOAD DATA
INFILE 'Daily_Diagnostics_test.csv'
BADFILE 'Diag_failed.csv'
APPEND
INTO TABLE ROAD_DIAGS
FIELDS TERMINATED BY ","
--WHEN VEHICLE != 'Vehicle' AND VEHICLE != 'Total'
(VEHICLE, DRIVER, START_DATE, START_TIME, START_TZ, END_DATE, END_TIME, END_TZ, 
 TM_DRV_MINS, TM_IDLE_MINS, TM_PTO_MINS, TRIP_TM_MINS,
 FUEL_DRV_GALS, FUEL_IDLE_GALS, FUEL_PTO_GALS, FUEL_TRIP_GALS, FUEL_START_GALS,
 MPG, DRV_MPG, START_ODOM, END_ODOM, DIFF_ODOM, AVG_MPH, MAX_MPH, MAX_RPM,
 DATE1, TM1, TZ1, ADDRESS_NUM1, ADDRESS_STREET1, ADDRESS_ST1, ADDRESS_ZIP1, ADDRESS_COUNTY1,
 DATE2, TM2, TZ2, ADDRESS_NUM2, ADDRESS_STREET2, ADDRESS_ST2, ADDRESS_ZIP2, ADDRESS_COUNTY2,
 STOP_CT, FAULT_CODE, HARD_BRAKE)

Note that the line WHEN is commented out, because I can't make it work.

and here is a sample of the data:

Vehicle,Driver,Start Date,Start Time,Timezone,End Date,End Time,Timezone,Driving (hh:mm),Idle (hh:mm),PTO (hh:mm),Trip (hh:mm),Driving (gals),Idle (gals),PTO (gals),Trip (gals),Before Trip (gals), MPG,Driving MPG,Start,End,Trip Distance (miles),Average(MPH),Maximum(MPH),Maximum RPM(rpm),Date,Time,Timezone,Address,Street,City,State,Zip,County,Date,Time,Timezone,Address,Street,City,State,Zip,County,Stop Count,Fault Code,Hard Brake,
26033, ,01/23/08,12:40 AM,MST,01/23/08,12:42 AM,MST,0,3,0,3,0,0.12,0,0.12, ,0,0,295829.22,295829.22,0,0,6.84, ,01/23/08,12:23 AM,MST,0,COUNTY ROAD 108,SAVAGE,MT,59262,RICHLAND,01/23/08,12:23 AM,MST,0,COUNTY ROAD 108,SAVAGE,MT,59262,RICHLAND,0,4, ,
26033, ,01/23/08,12:43 AM,MST,01/23/08,04:03 AM,MST,126,74,0,200,0,0,0,0, ,0,0,295829.22,295914.97,85.75,25.72,67.11, ,01/23/08,12:23 AM,MST,0,COUNTY ROAD 108,SAVAGE,MT,59262,RICHLAND,01/23/08,03:56 AM,MST,0,COUNTY ROAD 125,SIDNEY,MT,59270,RICHLAND,8,3, ,
26033, ,01/23/08,04:03 AM,MST,01/23/08,12:29 PM,MST,317,190,0,507,0,0,0,0, ,0,0,295914.97,296139.9,224.94,26.64,65.87, ,01/23/08,03:56 AM,MST,0,COUNTY ROAD 125,SIDNEY,MT,59270,RICHLAND,01/23/08,12:29 PM,MST,756,BELL RD,SIDNEY,MT,59270,RICHLAND,14,5, ,
Total, , , ,443,267,0,710,0,0.12,0,0.12, ,0,0,295829.22,296139.91,310.69,26.38,67.11, , , , , , , , , , , , , , , , , , , ,22,12,0,
Vehicle,Driver,Start Date,Start Time,Timezone,End Date,End Time,Timezone,Driving (hh:mm),Idle (hh:mm),PTO (hh:mm),Trip (hh:mm),Driving (gals),Idle (gals),PTO (gals),Trip (gals),Before Trip (gals), MPG,Driving MPG,Start,End,Trip Distance (miles),Average(MPH),Maximum(MPH),Maximum RPM(rpm),Date,Time,Timezone,Address,Street,City,State,Zip,County,Date,Time,Timezone,Address,Street,City,State,Zip,County,Stop Count,Fault Code,Hard Brake,
26035, ,01/23/08,03:59 AM,MST,01/23/08,09:05 AM,MST,222,85,0,306,50.87,1.5,0,52.37, ,3.32,3.42,285056.53,285230.5,173.98,34.07,68.97, ,01/23/08,03:24 AM,MST,756,BELL RD,SIDNEY,MT,59270,RICHLAND,01/23/08,09:00 AM,MST,0,COUNTY ROAD 338,SAVAGE,MT,59262,RICHLAND,7,3, ,
26035, ,01/23/08,09:06 AM,MST,01/23/08,03:37 PM,MST,273,118,0,391,68.5,1.5,0,70, ,3.24,3.31,285230.5,285457.3,226.8,34.8,69.59, ,01/23/08,09:00 AM,MST,0,COUNTY ROAD 338,SAVAGE,MT,59262,RICHLAND,01/23/08,03:37 PM,MST,756,BELL RD,SIDNEY,MT,59270,RICHLAND,11,3, ,
26035, ,01/23/08,03:45 PM,MST,01/23/08,04:38 PM,MST,32,21,0,53,7.37,0.25,0,7.62, ,3.42,3.54,285457.3,285483.4,26.1,29.73,67.73, ,01/23/08,03:37 PM,MST,756,BELL RD,SIDNEY,MT,59270,RICHLAND,01/23/08,04:33 PM,MST,0,COUNTY ROAD 108,SAVAGE,MT,59262,RICHLAND,2,3, ,
26035, ,01/23/08,04:49 PM,MST,01/23/08,10:22 PM,MST,256,76,0,332,52,1.25,0,53.25, ,3.71,3.8,285483.4,285681.0,197.6,35.67,64, ,01/23/08,04:33 PM,MST,0,COUNTY ROAD 108,SAVAGE,MT,59262,RICHLAND,01/23/08,10:17 PM,MST,0,COUNTY ROAD 108,SAVAGE,MT,59262,RICHLAND,9,3, ,
26035, ,01/23/08,10:25 PM,MST,01/23/08,10:35 PM,MST,4,5,0,10,0.37,0,0,0.37, ,1.68,1.68,285681.0,285681.62,0.62,3.9,24.85, ,01/23/08,10:17 PM,MST,0,COUNTY ROAD 108,SAVAGE,MT,59262,RICHLAND,01/23/08,10:35 PM,MST,0,COUNTY ROAD 338,SAVAGE,MT,59262,RICHLAND,1,5, ,
Total, , , ,787,305,0,1092,179.11,4.5,0,183.61, ,3.4,3.49,285056.53,285681.62,625.1,34.35,69.59, , , , , , , , , , , , , , , , , , , ,30,17,0,

As you can see, I need to have the SQL Loader to ignore the header and summary lines that appear for each grouping. Your suggestions are welcome as I need to implement this in an automatic process, I can call with a batch script.

blarman74 wrote:
Can anyone suggest how to fix this problem? The log file shows this error:
Record 8: Rejected - Error on table ROAD_DIAGS, column DATE2.
ORA-01858: a non-numeric character was found where a numeric was expected

The error message is clear - you try to load a value "non-date" in a DATE column and, therefore, sql * loader berms.
That points to a discrepancy between the list of columns in the control file and, in the data file.
Note the position of the table of the "DATE2" column in the table "ROAD_DIAGS":

test@XE>
test@XE> l
  1  select table_name,
  2         column_name,
  3         column_id
  4    from user_tab_columns
  5   where table_name='ROAD_DIAGS'
  6*    and column_name='DATE2'
test@XE> /

TABLE_NAME      COLUMN_NAME      COLUMN_ID
--------------- --------------- ----------
ROAD_DIAGS      DATE2                   34

test@XE>

If your control file specifies that the 34th column in the data file must be "DATE2". However-

test@XE>
test@XE> -- display the line number and the 34th column of the data file
test@XE>
test@XE> !perl -ne '{@a=split/,/; print $.,"\t",$a[33],"\n"}' Daily_Diagnostics_test.csv
1       County
2       RICHLAND
3       RICHLAND
4       RICHLAND
5
6       County
7       RICHLAND
8       RICHLAND
9       RICHLAND
10      RICHLAND
11      RICHLAND
12

test@XE>

the 34th column in your data file is 'COUNTY', which is counted in your control file.

Here is the list of the columns for 29 to 37 positions in the csv file:

test@XE>
test@XE> !perl -ne '{if ($. == 1) {@a=split/,/; foreach $i (28..36) {print $i+1,"\t",$a[$i],"\n"}}}' Daily_Diagnostics_test.csv
29      Address
30      Street
31      City
32      State
33      Zip
34      County
35      Date
36      Time
37      Timezone

test@XE>
test@XE>

And here are the columns specified in the control file:

  ...
  ...
  ADDRESS_NUM1,
  ADDRESS_STREET1,
  ADDRESS_ST1,
  ADDRESS_ZIP1,
  ADDRESS_COUNTY1,
  DATE2            DATE "MM/DD/YYYY",
  TM2              DATE "HH:MI AM",
  TZ2,
  ...
  ...

(You can open the csv file in MS Excel to get a better picture of the data in there).

As seen above, due to the incompatibility, sql * loader loads 'City' in ADDRESS_ST1, 'State' in ADDRESS_ZIP1, "Zip" in ADDRESS_COUNTY1 and DATE2 "County" - where it error.

The solution would be-

(a) If you want to load the 'City' information from the data file, and then add the "City" column in the table (if nonexistent) and specify in the control file.

(b) If you do not want to load the 'City' information from the data file, you can specify a column to 'FILL' in the file of control as follows:

  ...
  ...
  ADDRESS_NUM1,
  ADDRESS_STREET1,
  city1            FILLER,
  ADDRESS_ST1,
  ADDRESS_ZIP1,
  ADDRESS_COUNTY1,
  DATE2            DATE "MM/DD/YYYY",
  TM2              DATE "HH:MI AM",
  TZ2,
  ADDRESS_NUM2,
  ADDRESS_STREET2,
  city2            FILLER,
  ADDRESS_ST2,
  ADDRESS_ZIP2,
  ADDRESS_COUNTY2,
  ...
  ...

Hope that helps,
isotope

Firefox has my fake MSN - need help home page loading

For some reason my homepage is now view as a list with no photos. The info is all there, but in a column and when I try to click on the spot to collect my email it opens but does not. The home page wasn't working correctly and for some reason any has changed during the day, I rebooted, but it came the same way. I have another computer in the same room that is using MS and it loads the homepage correctly so I know that it must be my browser on this computer.

Hello

Many issues of the site can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
Note: This will be you temporarily disconnect all sites, you're connected to.
To clear the cache and cookies to do the following:
1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
2. Under "Time range to clear", select "all".
3. Now, click the arrow next to details to toggle the active details list.
4. In the list of details, see the Cache and Cookies and uncheck everything.
5. Now click the clear now button.
More information can be found in article to clear your cache, history, and other personal information in Firefox .

This solve your problems? Please report to us!

Thank you.

Perhaps a BIOS need help problem

So I have problems with my computer now and days where it crashes / blue screens, and he will give me options to try to recover my PC since the last accident, when I try to choose another option of recovering the BIOS itself it freezes my computer in this case, I see the 30 second timer it gives you and freezes as soon as I select a different option, or press "Enter". So I have to select the default option and wait for the timer to put end to so without issue arises. But I'm more worried, eventually I'll have other options by force and I discovered thanks to some research that the cause of my BIOS freeze could be maybe its updated. So I looked for my current version of bios and found is (American Megatrends Inc. 6.02, 21/07/2010) for my card mother-N-Alvorix-RS880-formfat (Alvorix) and I found this current version of (N-Alvorix-RS880 Motherboard BIOS BIOS update; Exit the: 2011-09-23) on the site, but knowing how some of these things may be, I'm worried that it might be a different motherboard BIOS and I can't turn my motherboard Clipboard. Can someone help me?

I managed to apply it safely on my BIOS and it seems to have updated since a 2010 version of a version 2011 of the BIOS, and so far no problem, so I hope it's my fix, but I can't say until my computer decides to hit again from the BIOS recovery mode

APPCRASH Error Message constant. Nothing I do not work. Heard a real message but a Trojan horse? Need help, problems or eliminate this problem.

I have recently installed SP2 for Vista, since then I had problems with access to programs and applications. When I try, I get this message, telling me that I have a problem with the windows Explorer and click to solve the problem or click here to view the internet, the details of the problem are...

Problem event name: APPCRASH
Application name: Explorer.EXE
Application version: 6.0.6002.18005
Application timestamp: 49e02a1e
Fault Module name: SHLWAPI.dll
Fault Module Version: 6.0.6002.18005
Timestamp of Module error: 49e041f4
Exception code: c0000005
Exception offset: 0000000000002686
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Information additional 1:5498
More information 2: 09cdedf6f8b9431d69cf4381552f7466
Additional information 3: fd44
Additional information 4: dd3eb715a1b9e0caf2e7cb13d95736bf

Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

No matter how many times I click on help to repair 'get' or 'internet research' buttons, nothing happens. If I have X everything seems to work normally.

I read on the net that it is a virus, Trojan or a bot, so I'm worried.

I am running AMD Phenom X 4 9100e quad core with Vista premium OS in a gateway RS780 MB. I have Norton 2009, also recently installed (just before SP2). Everything is fully operational. All scans clean. Windows Defender analysis reveals nothing but the problem continues. Several times a day.

Any ideas?

Hello Mike,.

Looks like a DLL file missing (SHLWAPI.dll) or the missing link between the Dynamic link Library & the registry entry. You should try to run the System File Checker tool, see below:

To help resolve this problem, use the tool (SFC.exe) System File Checker to determine which file is causing the problem and then replace the file. To do this, follow these steps:
1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
2. Type the following command and press ENTER: sfc/scannow (Yes there is a space after sfc) the sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Hope this helps you. Let us know anyway. Make it a great day!

"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

Desperately need help problem preview/publish in Captivate 5

I work with Captivate 5 latest version (incl. patch) on a Windows 7 computer.
I have a project of ~ 120 slides of 'light' (boxes, buttons, TEBs only about 30 ~ slide), the slide deck is imported from ppt. In addition, I have a few (recorded with ppt, important in library) audio files for each slide.
My problem: if I saw 'slide' or "then 5 slides", everything works - but as soon as I try Preview complete draft or "from this landslide", audio door, but the slide content disappears, I get a white screen that flashes & sound like mouse clicks continue. When the flashing you see elements of other slides appear and disappear, but so quickly (in milliseconds) that it is impossible to understand the slides. And above all: WHY?
I tested with several slides as starting point and he continues to plays, as above, so do not think that it has something to do with a particular slide.
I hope someone can help. I'm at my wits end
BR, Anja

Hello Anja, and welcome to the forum,

There could be a lot of reasons: hardware problems of corruption of the file (blades or objects) etc.

You could try a couple of things:
- clear the cache of CC
- Delete preferences (with closed CP) file; on Win7, it's this folder: C:\Users\\AppData\Local\Adobe\Captivate 5
- try to copy and paste the slides to a new empty project with the same resolution, not all at once in order to find the corrupted slides possible
Normally the size to CP5 is not really a problem more than in previous versions, but of course your PC configuration is important.

Lilybiri

Grandma needs help problem "sysdata.xml.

I bought a computer about 18 months ago that started unexpectedly quit after 12 months. No error message. I went back to the provider that did not cause after replacing the power supply and move the surge protection. He replaces computer and transfer data via Acronis. Stops kept happening, but now I get the message that Microsoft has deceted a problem and restarts the computer. When I look into the details, I see whenever there is the same message but with different sysdata.xml figures for example WER-96377-0. I sent this to the supplier who ignores me currently. I ran a scan of Malware and a sweep of CCleaner. I tried to find the file, but it is not visible. I googled the file details and see that this is one problem with others. I have no hope of understanding or to fix this problem myself. What I want to know is it something I should continue with the technician who sold me this nightmare? Why this is happening? Is it her fault or mine? I'm really lost here, oh and frustrated too, I could really do with some advice on how to proceed.

Thanks in advance.

You are welcome.

Quite often blue screen errors are caused by a faulty driver. The pilot could be a hardware or software driver.

Blue screen sometimes errors are caused by defective hardware.

By looking at the files minidump would give an indication of what (s) or material may have caused the accident.

If the person tries to solve the problem has a background in troubleshooting blue screen error then there is a good chance that he or she can decide the issue.

If the problem is software it might follow you for Windows 10 so it's best to try so to resolve this matter before the upgrade.

Obviously if the problem is hardware problem would be independent of the operating system.

If you have a new computer the problem would follow you if the problem was software and that you have installed the same software on the new computer.

[SOLVED] Need help problem of ORA-12514

[SOLVEDi am currently unable to connect to a local database system, I am facing the error ORA-12514 fact someone knows what's the problem I posted the exact details found for my tnsnames.ora, listeners.ora and even a snippet of the serc cmd]

tnsnames.ora

# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.


LISTENER_ORCL=
  (DESCRIPTION=
    (ADDRESS=
      (PROTOCOL=TCP)
      (HOST=Deon-PC)
      (PORT=1522)
    )
    (CONNECT_DATA=
    )
  )


ORCL=
  (DESCRIPTION=
    (ADDRESS=
      (PROTOCOL=TCP)
      (HOST=Deon-PC)
      (PORT=1521)
    )
    (CONNECT_DATA=
      (SERVER=dedicated)
      (SERVICE_NAME=orcl)
    )
  )


EXTPROC_CONNECTION_DATA=
  (DESCRIPTION=
    (ADDRESS=
      (PROTOCOL=IPC)
      (KEY=EXTPROC2)
    )
    (CONNECT_DATA=
      (PRESENTATION=RO)
      (SID=PLSExtProc)
    )
  )

Listener.ora

# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.


SID_LIST_LISTENER =
  (SID_LIST =
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
      (PROGRAM = extproc)
    )
  )


LISTENER =
  (DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC2))
      (ADDRESS = (PROTOCOL = TCP)(HOST = Deon-PC)(PORT = 1522))
    )
  )

Service

Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation.  All rights reserved.


C:\Users\Deon>lsnrctl service


LSNRCTL for 32-bit Windows: Version 10.2.0.4.0 - Production on 16-SEP-2014 10:36
:24


Copyright (c) 1991, 2007, Oracle.  All rights reserved.


Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC2)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
    Handler(s):
      "DEDICATED" established:0 refused:0
         LOCAL SERVER
The command completed successfully


C:\Users\Deon>

In fact, Ed Stevens has an excellent article on the issue of the ORA 12512 of troubleshooting:

ORA-12514: TNS:listener is not currently in service. Ed Stevens, s/n

Need help about sql loader

Hello
I will execute following command
sqlldr admin_user@ces CONTROL = D:\sample_control.ctl log = D:\sample_log.log D:\Sample_bad.bad = bad
In the case of valid data, it's inserted data properly into the table. While no valid records added in the wrong file.
Now I want to restore whenever valid data that the number of bad record greater than equal to 10.
In short, whenever the file has more than 10 invalid records, I don't want to insert any record of this file.
Please give me the solution. Thanks in advance.

SQL * Loader command line reference

DISCARDMAX (Integer)

Concerning

Etbin

attachMovie - need help problem

I'm doing a thing of statusbar, whenever you press the button, it sets a new Movieclip. But he focus only 1, while 1 goes down just whenever I press it.
function StatusTextUpdate() {}
AmountVisible ++;
root.menus.attachMovie ("StatusUpdate", "StatusUpdate_" + AmountVisible, 1, {_x:-330.00, _y:20 * (AmountVisible) + (-500)});
}
I want so it adds another 1 each time than his press. Could someone show me how I can do this?

You must assign a different depth to each movieclip in the case otherwise they replace each other. at most, there may be a movieclip by depth:

function StatusTextUpdate() {}
AmountVisible ++;
root.menus.attachMovie ("StatusUpdate", "StatusUpdate_" + AmountVisible, AmountVisible, {_x:-330.00, _y:20 * (AmountVisible) + (-500)});
}

Can't click on a Web site and images don't load, need help!

I need to fill out a survey online, but I can't check the small boxes next to the images or the options. First of all, I noticed that on this site;
http://www.Buzzfeed.com/Peggy/Bohemian-homes-Youd-love-to-chill-out-in#.liMj9b8pqw
Images has not been loaded, but I thought it was due to the slow internet connection. When I clicked on the links that were given as the source of all the images loaded. Then on the test I noticed that I can not click on options. To make sure that I had a problem, I tried some lame games such as:
http://www.Buzzfeed.com/tomphillips/true-or-false-or-what#.eaOjqW6kJ2
I tried some of the options on the support page as disabling add ons, restart firefox on SafeMode etc. I even updated my shockwave, java, etc. Later, because of the risks, I uninstalled java. Still nothing and need help!

Thank you.

Thank you guys for your interest. I solved the problem by removing mozilla file from my computer and reinstall. Now, everything is perfect. For the survey I have to fill out, well it turns which includes soundcloud.com which cannot be opened with mozilla and chrome files. I could open it with my phone and noticed that the questions were all files to soundcloud.

Thanks again.

I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

Original title: cannot find awuvomas.dll

I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit. If you make a mistake, that's all.

These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem. Also, I'd be suspicious of ideas that begin with the words "try." You don't need to try things, you need to fix things. You don't need to try ideas that might work, you must do something that will always work all the time.

Here are the detailed instructions that protect you and solve your problem in the 'right' way.

There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them. If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

It might be a removal of malicious software or an application not installed. The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it. Autoruns (see below) you get the elements no matter where it is.

You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer. The msconfig program is not a Startup Manager, that's a troubleshooting tool. Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration. Just disable the display of a start-up error message should not count as a 'solution' to the problem.

If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns. The problem can always be found in the registry well.

Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
. There is no cancellation or exit without saving the option in regedit.

Here is a link to a popular registry backup tool:

http://www.SnapFiles.com/get/ERUNT.html

You can also use the Autoruns to find the element of start remains little matter where he's hiding. Autoruns does not install anything on your computer. It will display all startup locations where the reference may be then you can turn it off or remove it completely. Here is the download link for Autoruns:

http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

Run Autoruns.exe and wait that he at the end of the filling of the list of entries.

When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner. Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information. You are really interested only a few sections.

The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.

Scroll through the list and look for a boot entry associated files in the error message.

If you can't find on the connection tab, look in any tab.

You can also click file, search to search for logon, or any tab for all or part of the name of the element.

Right-click on the offending entry and choose Remove. If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry. If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it. Autoruns shall display the same information however.

Given that your system has or has had an infection, follow up with this:

Perform scans for malware, and then fix any problems:

No matter what you use for malware protection, follow these steps:

Download, install, update and do a full scan with these free malware detection programs at:

Malwarebytes (MMFA): http://malwarebytes.org/

SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

They can be uninstalled later if you wish.

Restart your computer and solve the outstanding issues.

images & SVG does not load in the browser on Bluehost server - need help

I need help to solve a problem with Muse cc 2015.2 on the bluehost server. The site looks great in the "Preview in browser" and so after export and by launching the html code of the file of my machine. When I download the bluehost site, nothing in charge. All files are uploaded to the server.
The strange thing is that when the site is in the fixed mode, loading the images, but when I build the exact location in fluid mode, nothing loads.
Any advice would be greatly appreciated!

cdglab wrote:

When I download the bluehost site, nothing in charge. All files are uploaded to the server.

Any advice would be greatly appreciated!

BlueHost is a WordPress server... hire someone and it works perfectly

Problem in creating a global var 'data' to a json file - need help

I'm having a problem with a code and need help.
I use the code below to load and parse a JSON file and store the result in a var 'data '. Everything works fine on the compositionReady page. The problem is that it would save a lot of extra time analysis of loading/if I could do this 'data' available worldwide. With the current
var = eval (json) data
the 'data' are only available locally. So, how do I or can I do a global var ABOARD cela?
Here's what I have now and what I tried.
$.getJSON ("images/profiles.json", function (json)
{
SYM. Data = eval (json); it does not work
data var = eval (json);
var temp = eval (json); , and is not this pair
sym.setVariable (temporary data)
for (i = 1; i 17 <; i ++) {}
sym.getSymbol("thumb"+[i]).$("thumb1").css ("background-image", "url (".thumb + data.player [i] + ")" ");
sym.getSymbol("thumb"+[i]).$("j_num").html (data.player [i] .j_num);
sym.getSymbol("thumb"+[i]).$("p_name").html ((data.player[i].f_name) + "< br >" + (.l_name data.player [i]));
} / / 3 above lines retrieves the thumbnail image of players, Jersey number and first - last name. it's all working well
}
);
SYM.$("stage"). CSS({"margin-left":"auto","margin-right":"auto"});)

There are 17 other 'profile' of sym.elements leaves, who will appear via ' by clicking on ' an animated image of an inch. Each sheet contains approximately 20 "fields" that get their data from the JSON file. If it is better to recharge/eval the json for each sheet I can do. It's just seems a better idea to be able to access the same 'data' and only load/parse it once?
If any of you gurus of coding could help me I would appreciate it.

Thank you

Joel H

Rough workaround is to use data = eval (json). This will create a global variable. Not a good solution though. Smarter way is to use the setVariable() method: sym.getComposition () .getStage () .setVariable ('data', eval (json)). After that, you can use data var = sym.getComposition () .getStage ().getVariable('data') to access.

I NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he try to put the itunes thing but

NEED HELP Please im having a problem to forget my password and when I plug it it says its locked with a password he tried to put the itunes thing but it says enter password I put in what I rember, then said lokced for five minutes help me pls

Without knowing the password for your iPhone, there is no way to unlock it, bring even you to the Genius Bar. If you continue to enter the wrong password, you will be locked out of your iPhone, and your data will be unaccessable.

I NEED HELP! Problems of load :(

Similar Questions

Maybe you are looking for