Need help... Windows 8

Similar Questions

• Flash player is not required to use a 32-bit work but any help is for vista, I need help windows 7 as vista doesn't work__

  Please help I need to downgrade to a 32-bit so I can down the daod flash player I followed using vista it says installed but does not work

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help, Windows 7 CPU is used up by wdf 01000.sys?

  Hi, I use windows 7 64-bit, I'v noticed a lot of cracks and pop latency that prevents me to record audio in real time.

  I used Latencymod to find out the cause of the problem are the files 01000.sys (20,000 ms), USBPORT.sys (2 ms) Wdf, ataport.sys (2ms) and ntoskrnl.exe.

  I am a sound engineer and desperately need to solve this problem, so any help would be welcome.

  I tried to turn off wifi and lan. I tried to disable powersaving and I have also disabled devices in Device Manager. Nothing worked and I can't find anything useful on the internet so far.

  Thank you.

  Hello

  Thanks for posting in the Microsoft community!
  You have reached the right forum for your question.

  1. don't you make changes on the computer before the show?
  2 you all the updated drivers from the manufacturer's Web site?
  3. What is the exact error message?

  Method 1:
  Run the fix it and check.
  Difficulty of Windows system performance slow computer problems
  http://support.Microsoft.com/mats/slow_windows_performance/en-us?WA=wsignin1.0

  Method 2:
  
  I would like to inform that the CPU usage depends on other factors as well as the programs and processes that are running on the computer. Check out the link-
  http://Windows.Microsoft.com/en-us/Windows7/view-CPU-utilization-and-other-performance-information

  
  Method 3:
  Step 1: check if the problem occurs in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Step 2: If the problem does not occur in safe mode then, you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 4:
  Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

  Method 5:
  You can also run the fix provided in the link and check out:
  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  
  Reference link:
  You can also optimize Windows 7 for better performance and control:
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Just reply with the results. I'd be happy to help you more

• Need help, Windows Server 2008 r2, some registry files deleted by mistake

  In the editor to register Windows Server 2008 r2 by mistake I deleted some files in the windows registry, and after this Server does not start, please help is it possible to repair the registry or recover the server. and also I did not recover the system image.

  concerning
  Sudarshan

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• HP mini 200 computer: need help windows of hp mini 200 7 - 32 bit

  I lost power to my laptop (hp mini 200, windows 7-32 bit), I didn't have the battery connected.
  When I start the computer it will not work and gives me the message. Saying the found boot device.
  Please indtall an operating system on your hard drive.
  hard drive (3FO)
  For more information, please visit:www.ho.com \go\techcenter\startup

  In the main bios HDD self-test menu shows there is no hard drive, memory test pass and click ok.

  I have the family photos and videos in this computer that I can't afford to lose.

  How can I recover my computer or the files?

  Help, please.

  Nharis

  It could very well be too late for photos and videos.  When a hard drive crashes, it is hard to say whether something can be salvaged or not.  The best bet is also replace the failed hard drive and on a work computer connect the player down with an adapter LIKE THIS.  Then boot from a Linux Live CD to examine the failed drive and move all the data to the CD/DVD drive Flash

• Need HELP: Windows 7 Ultimate upgrade Windows Vista Edition full

  When my phone was broken, one of my friends that he fixed and did not know that it has installed Windows 7 Ultimate in there which is not legitimate. Originally, Windows Vista Home Premium has been installed in it. I want to go back to Windows Vista and I have a drive to install Windows Vista Edition full and wanted to install it without losing my files. How can I do?

  Hello

  It's not a downgrade.

  Unless you have a windows.old folder, you cannot reinstall Vista without losing your files and programs.

  You will need to do a clean install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Need help Windows Installer

  I am installing a new piece of software on my Windows Vista machine and I can't make it work.  He said: "the installer of Windows for the Service is not accessible.  I tried every fix I can find and nothing helped.  Where should I go form here?  I ran Microsoft Fix - it, and he said everything is ok.  I bought some FixCleaner because certain site Web told me that he would find the problem and fix it, but it does not... Help!

  I am installing a new piece of software on my Windows Vista machine and I can't make it work.  He said: "the installer of Windows for the Service is not accessible.  I tried every fix I can find and nothing helped.  Where should I go form here?  I ran Microsoft Fix - it, and he said everything is ok.  I bought some FixCleaner because certain site Web told me that he would find the problem and fix it, but it does not... Help!

  ===========================================
  Visit the support site of the program that you are trying
  to install... There may be some useful information here.

  And... If you haven't seen it... the following article can be
  worth a visit:

  
  (2438651) how to troubleshoot problems during installation
  or uninstall programs on a Windows computer
  http://support.Microsoft.com/kb/2438651

• need help:(windows 8 plusieurs bsod se bloque c'est à dire.) memory management, irql not..., kernel mode...

  https://drive.Google.com/file/d/0B0ATyEKasqZmbkpPNG1WSXd0STA/edit?USP=sharing

  theres a link to all my minidumps.

  I don't know what to do, I have many BSODs in a row and then many times where I can use the computer for hours. It seems completely random. That this has something to do with the closures of power?

  Thank you!

  BUGCODE_USB_DRIVER (FE)

  This indicates that an error occurred in a bus universal series (USB) driver.

  3: kd > k
  Call child-SP RetAddr site
  fffff880'014f81e8 fffff880'0464 484 nt c! KeBugCheckEx
  fffff880 '014f81f0 fffff880' 04615ce2 USBPORT! USBPORT_ProcessURB + 0 x 36644
  fffff880 '014f8310 fffff880' 04615afd USBPORT! USBPORT_PdoInternalDeviceControlIrp + 0 x 52
  fffff880 '014f8360 fffff880' 047536f1 USBPORT! USBPORT_Dispatch + 0x17d
  fffff880 '014f83c0 fffff880' 047533ca usbhub! 0x1f1 + UsbhPdoInternalDeviceControl
  fffff880 '014f8430 fffff880' 0104f0a7 usbhub! UsbhGenDispatch + 0x9a
  fffff880 '014f8460 fffff880' 058f63b6 Wdf01000! imp_WdfRequestSend + 0x4b3
  fffff880'014f84f0 fffffa80'05468700 netr28ux + 0x9a3b6
  fffff880 '014f84f8 fffffa80' 0559db30 0xfffffa80'05468700
  fffff880 '014f8500 fffffa80' 055a 1020 0xfffffa80'0559db30
  fffff880 ' 014f8508 00000000 00000000 of ' 0xfffffa80 ' 055a 1020

  netr28ux.sys is the series of Ralink RT2870 USB802.11n driver wireless card (you can have another manufacturer).

  PAGE_FAULT_IN_NONPAGED_AREA (50)

  This indicates that invalid system memory was referenced.

  Bug control 0 x 50 usually occurs after the installation of a faulty hardware or installation failure of material (usually associated with defective RAM, either main memory, L2 RAM or RAM video cache).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Bugcheck 50, {fffff12014494a90, 1, fffff803968f06f5, 2}

  Address fffff12014494a90 wrote in the statement to the address fffff803968f06f5.

  3: kd > r cr2
  Last set context:
  CR2 = fffff12014494a90

  The address of 1 parameter was stored in cr2 before calling the page fault handler.

  3: kd >! fffff12014494a90 pte
  GO fffff12014494a90
  PXE to the EPP of FFFFF6FB7DBEDF10 at FFFFF6FB7DBE2400 at FFFFF6FB7C480510 at FFFFF6F8900A24A0 PTE POE
  contains 0000000000000000
  not valid

  3: kd > dd fffff12014494a90
  fffff120'14494 has 90? ???????? ???????? ????????
  fffff120'14494aa0? ???????? ???????? ????????
  fffff120'14494ab0? ???????? ???????? ????????
  fffff120'14494ac0? ???????? ???????? ????????
  fffff120'14494ad0? ???????? ???????? ????????
  fffff120'14494ae0? ???????? ???????? ????????
  fffff120'14494af0? ???????? ???????? ????????
  fffff120'14494 b 00? ???????? ???????? ????????

  Of the above, we can see that the address fffff12014494a90 is indeed invalid. That being said, why fffff12014494a90 try to write in fffff803968f06f5?

  3: kd > kv
  Child-SP RetAddr: Args to child: call Site
  fffff880 '09db76f8 fffff803' a 969385, 0: 00000000'00000050 fffff120 '14494a 90 00000000 00000001' fffff880' 09db78e0: nt! KeBugCheckEx
  "fffff880 '09db7700 fffff803' 968b1acb: 00000000 ' 00000001 fffff120" 14494a 90 fffffa80 '07a14b00 fffff803' 968c0db0: nt! : FNODOBFM: 'string' + 0x33e2a
  "" fffff880 '09db77a0 fffff803' 96874eee: 00000000 ' 00000001 fa80041a ' b89004c2 fffff680 ' 36587700 fffff880 ' 09db78e0: nt! MmAccessFault + 0x55b
  fffff880 '09db78e0 fffff803' 968f06f5: fffff803 ' 9684f363 fffffa80 '041ab868 06cafaf0' 06cafaf0 fffffa80 ' 07a 05010: nt! KiPageFault + 0x16e (TrapFrame @ fffff880'09db78e0)
  fffff880 '09db7a78 fffff803' 9684f363: fffffa80 ' 041ab868 06cafaf0 '06cafaf0 fffffa80' 07a 05010 fa80041a ' b89004c2: nt! MiResolveDemandZeroFault + 0x5
  "fffff880 '09db7a80 fffff803' 968b1e1c: 00000000 ' fffffa80 00000000 '07a14b00 fffff880' 09db7b80 fffffa80 ' 0615b 568: nt! MiProtoFault + 0x1a3
  fffff880 '09db7b00 fffff803' 96874eee: 00000000'00000000 00000000' 550280cb 0000006c 'af0ef501 fffff880' 09db7c40: nt! MmAccessFault + 0x8ac
  fffff880 '09db7c40 000007fd' c1ee0a00: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: nt! KiPageFault + 0x16e (TrapFrame @ fffff880'09db7c40)
  0000006c 'af0ef530 00000000' 00000000: 00000000'00000000 00000000'00000000 00000000'00000000 00000000'00000000: 0x000007fd'c1ee0a00

  3: kd > .trap fffff880'09db78e0
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000002 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = fffff8a00a6dd000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff803968f06f5 rsp = fffff88009db7a78 rbp = fffffa8007a14b00
  R8 = 0000000000000000 r10 = fffff8a00a6dd000 fffff6fc500536e8 = r9
  R11 = 0000000006cafaf0 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv up ei pl zr po nc
  nt! MiResolveDemandZeroFault + 0 x 5:
  fffff803'968f06f5 4 c 89442418 mov qword ptr [rsp + 18 h], r8 ss:fffff880'09db7a90= fffffa8007a05010

  Address to education, we failed on, fffff803'968f06f5 deferenced RER + 18 h where rsp + 18 h is fffff88009db7a78. This would result in a write from memory at the address fffff880'09db7a90.

  3: kd >! PTE fffff880'09db7a90
  GO fffff88009db7a90
  PXE to the EPP of FFFFF6FB7DBEDF88 at FFFFF6FB7DBF1000 at FFFFF6FB7E200270 at FFFFF6FC4004EDB8 PTE POE
  contains 0000000000624863 contains 0000000000623863 contains 0000000038208863 contains 800000004123C 963
  GetUlongFromAddress: cannot read fffff80396b750e4
  NFP 624 - DA - KWEV NFP 623 - DA - KWEV NFP 38208 - DA - KWEV NPF 4123c - G-DA - KWEV

  3: kd > dd fffff880'09db7a90
  fffff880'09db7a90 fffffa80 b89004c2 fa80041a a 07, 05010
  fffff880' 96b6e700 00000000 00000011 fffff803 09db7aa0
  fffff880'09db7ab0 a927a274 ffff2ad2 c0000016 00000000
  fffff880'09db7ac0 fffff880 afaf0000 0000006c 09db7c40
  fffff880'09db7ad0 fffff880 afaf0000 0000006c 09db7c40
  fffff880'09db7ae0 00000000 00000000 fffff8a0 0a6dd000
  fffff880'09db7af0 00000000 968b1e1c fffff803 c0000016
  fffff880'09db7b00 00000000 00000000 fffffa80 07a14b00

  Right, so code wanted to write to fffff880'09db7a90 which, as we can see above is a valid address. The 1st parameter and cr2 however note that we have not written to the address fffff12014494a90.

  nt! MiResolveDemandZeroFault said the material to write in fffff880'09db7a90 (who once again of incidentally is a completely valid address), and the material came back and said 'I can't write fffff12014494a90.

  However, this seems very material right here - nom_processus: avgrsa.exe is an associated AVG process at the time of the accident.

  MEMORY_MANAGEMENT (1A)

  This indicates that an error occurred serious memory management.

  Error checking 1 a, {5003, fffff70001080000, 620, 62200000 c 50}

  -1 setting of the bug check is 5003 which lists free work is corrupt. It is usually a hardware error, however, a device driver causing corruption is possible as well at times.

  ATTEMPTED_EXECUTE_OF_NOEXECUTE_MEMORY (CF)

  This indicates that an attempt was made to execute non-executable memory.

  KMODE_EXCEPTION_NOT_HANDLED (1e)

  This indicates that a kernel-mode program generated an exception which did not catch the error handler.

  3: kd > k
  Call child-SP RetAddr site
  fffff880 '02af70b8 fffff801' da400c56 nt! KeBugCheckEx
  fffff880 '02af70c0 fffff801' da34c4bd nt! KiFatalExceptionHandler + 0 x 22
  fffff880 '02af7100 fffff801' da3743d4 nt! RtlpExecuteHandlerForException + 0xd
  fffff880 '02af7130 fffff801' da34e216 nt! RtlDispatchException + 0 x 458
  fffff880 '02af7840 fffff801' da2df842 nt! KiDispatchException + 0 x 455
  fffff880 '02af7f00 fffff801' da2dd59f nt! KiExceptionDispatch + 0xc2
  fffff880 '02af80e0 fffff801' da461287 nt! KiInvalidOpcodeFault + 0x11f
  fffff880 '02af8270 fffff801' da31cfe4 nt! : FNODOBFM: 'chain' + 0 x 16175
  fffff880 '02af8360 fffff880' 052d50f4 nt! KeSetEvent + 0x1c3
  fffff880 '02af83d0 00000000 fffffa80' netr7364 + 0x320f4
  fffff880'02af83d8 fffffa80 '0xfffffa80 00000000' 00000000
  fffff880 '02af83e0 fffffa80' 06de3152 0xfffffa80'00000000
  "fffff880'02af83e8 fffffa80 ' 07039808 0xfffffa80 ' 06de3152
  fffff880 '02af83f0 fffffa80' 06de3018 0xfffffa80'07039808
  fffff880 '02af83f8 ' 00000003 00000004 0xfffffa80' 06de3018
  "fffff880 '02af8400 00000000' 00000026 0 x 00000003 00000004"
  fffff880 '02af8408 fffffa80' 06e08580 0 x 26
  fffff880 '02af8410 fffffa80' 0688a 038 0xfffffa80'06e08580
  fffff880 '02af8418 fffffa80' 06dade40 0xfffffa80'0688 has 038
  fffff880 '02af8420 fffffa80' 06df6d10 0xfffffa80'06dade40
  fffff880 '02af8428 fffff880' 052aae7a 0xfffffa80'06df6d10
  fffff880 '02af8430 fffffa80' 06e00000 netr7364 + 0x7e7a
  fffff880 '02af8438 fffffa80' 0688 to 000 0xfffffa80'06e00000
  "fffff880'02af8440 fffffa80 ' 00000066 0xfffffa80 ' a 0688, 000
  fffff880 '02af8448 fffffa80' 0000013a 0xfffffa80'00000066
  fffff880 '02af8450 fffffa80' 06de3018 0xfffffa80'0000013 has
  fffff880 '02af8458 00000000' 0000000 0xfffffa80 a' 06de3018
  fffff880 '02af8460 fffffa80' 0688a 000 0xa
  fffff880 '02af8468 fffff880' 03ce647c 0xfffffa80'0688 has 000
  fffff880 '02af8470 00000002' 00000122 usbehci! EHCI_SubmitTransfer + 0 x 88
  fffff880 '02af84b0 0000057f' f8f2a800 0x00000002 "00000122
  fffff880 '02af84b8 fffff880' 010386be 0x0000057f'f8f2a800
  fffff880'02af84c0 fffff880'053088 Wdf01000 5 c! imp_WdfRequestReuse + 0x19a
  fffff880 '02af8530 fffffa80' 070d57f0 netr7364 + 0x658c5
  fffff880 '02af8538 ffff0000' 079b03f3 0xfffffa80'070d57f0
  fffff880 ' 02af8540 00000000 00000000 of ' 0xffff0000 ' 079b03f3

  netr7364.sys again.

  FAILURE_BUCKET_ID: 0x1E_c000001d_BAD_IP_netr7364 + 320f4

  It looks like a bad instruction pointer.

  -------------------------

  1. remove and replace AVG with built-in Windows Defender from Windows 8 for temporary troubleshooting purposes because it can cause conflicts NETBIOS:

  -AVG removal http://www.Avg.com/us-en/utilities

  Windows Defender (how put on after the withdrawal)- http://www.eightforums.com/tutorials/21962-Windows-Defender-turn-off-Windows-8-a.html

  2 if the above fails, please run Memtest for no. LESS than ~ 8 going on (several hours):

  Memtest86 +:

  Download Memtest86 + here:

  http://www.memtest.org/

  Which should I download?

  You can either download the ISO pre-built you want to burn to a CD and then boot from the CD, or you can download the automatic installer of the USB. What this will do is format your USB drive, make a boot device and then install the necessary files. Both do the same job, it's just you that you choose, or you have available (be it CD or USB).

  Note that some older generation motherboards do not support USB boot, your only option is CD (or floppy if you really wanted to).

  How Memtest works:

  Memtest86 writes a series of test patterns for most of the addresses of memory, reads the written data and compares it to find errors.

  The default pass is 9 different tests, varying in the modes of access and test data. A tenth test, bland, is selectable in the menu. He wrote all the memory with zeros, then sleeps 90 minutes before checking to see if the bits have changed (perhaps because of refresh problems). This is repeated with all those for a total time of 3 hours by pass.

  Many chipsets can report RAM speed and timings by SPD (Serial Presence Detect) or EPP (Enhanced Performance Profiles), and some even support changing the expected memory speed. If the expected memory speed is overclockee, Memtest86 can test that memory is free of error with these faster settings.

  Some hardware is able to report the status of the "PAT" (PAT: active or PAT: disabled). This is a reference to the Intel performance acceleration technology; There may be the BIOS settings that affect this aspect of memory synchronization.

  This information, if it is available for the program, can be displayed via a menu option.

  Other questions, they can most likely be answered by reading this excellent guide here:

  http://Forum.canardpc.com/threads/28864-FAQ-please-read-before-posting

  Kind regards

  Patrick

• Hi, need help, Windows stopped from STOP error code: 0x0000000A (0x00000000.0x00000000.0x00000002.

  InnSafe in startup mode, blue screen, STOPS. IRQL_NOT_LESS_OR_EQUAL STOP: 0x0000000A (0x00000000.0x00000000.0x00000000.0x00000002.0x00000001.0x804DC11D)

  I don't know how to download the content, normally I could rectify, but not this time, how it is done? racey21

• Need help to install iTunes v12.4.3.1 Windows 10

  I've tried everything to make it work:

  1. I tried to disable my antivirus before installing

  2. I tried to install as administrator

  3. I have tried to uninstall all relevant applications of apple.inc, restart my pc and then install again

  4. I tried to update my Windows

  I had iTunes installed before on my Pc with Windows 10, but two days ago, I restored my pc and now I can't install it.

  Please I need help

  

  The message "an error occurred during the installation of assembly ' Microsoft.VC80.CRT, type ="win32", version ="8.0.50727.6195", publicKeyToken ="1fc8b3b9a1e18e3b", processorArchitecture is...» "may occur because a particular library file is not included in the supplied with iTunes distribution package or will not be installed because some unspecified reason. Install Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package MFC security update before you attempt to reinstall iTunes can help.

  There are three files to choose from if you need choose the one that matches the processor architecture of your system, which must be indicated in the error message.

  • Vcredist_x86. EXE - 32 bit systems
  • vcredist_IA64. EXE - Itanium processors
  • VCRedist_x64. EXE - other 64-bit systems

  When to reinstall iTunes, right-click on the Setup and run as administrator.

  See troubleshoot problems with iTunes for Windows updates for more information if necessary.

  TT2

• HP Pavilion Notebook - 15-p199: need help with the installation and activation of 10 Windows after completely uninstalling Windows

  Hello HP assistants.

  I need help for a specific problem. My laptop came with an installation of Windows 8.1. Then I upgraded to 10 Windows when it became available. After a while, I decided to uninstall Windows completely (to wipe the hard drive) and install a Linux operating system.

  Now, I decided that I want to use some software that is not available on Linux and if I want to reinstall Windows 10. My problem is that Windows has completely disappeared in a form any. So now, I need to download Windows 10 from an official source (which I think can be done fairly easily from the official source of Microsoft, although if there is a better, HP official medium to do this then please recommend it) and then I need to activate Windows some how.

  As has been made clear, I have the right to use Windows 8.1 and 10 but I would need to download Windows 10 and turn it on. Is there a way to do this? I'm literally stuck without solution.

  Thanks in advance.

  Hello

  As long as the previous installation of Windows 10 had activated Ok after upgrade from 8.1, you can simply perform a new installation as described in the guide on the following link.  Note: On the activation screen, select "I don't have a product key" - Windows will activate automatically once installation is complete.

  http://www.howtogeek.com/224342/how-to-clean-install-Windows-10/

  Kind regards

  DP - K

• HP 15-f209wm with Intel Celero: need help with a unusual amenities. Install windows 7 on a new computer windows 10.

  Hello
  
  I am really puzzled here and need help you guys!
  
  A friend of mine, who is not computer savy is used to windows 7 and would like to 'return' in Windows 7 to a windows 10.
  She recently bought a new computer:
  Black HP 15.6 "15-f209wm with Intel Celeron N2840 4 GB memory 500 GB (windows 10)

  And had me working on it to install it as a Windows 7.
  The problem that I didn't forsee is that after I installed wiondows 7 Nothing worked because all the installed drivers were too 'new' for the Windows 7 operating system at least that is what I think the problem is.

  The main thing that doesn't work is the USB ports and Wifi,
  and I cannot find drivers to make this 'connection', this 'bridge' of sorts between Windows 7 operating system and the hardware inside the computer.  And I can't find solutions on the net!

  An idea that I'm trying is to copy and paste drivers from another computer Windows 7 HP, on it. But I don't know if that's going to walk.

  I am really confused with this and need your expertise!
  
  We thank you in advance.

  * Note *.
  This computer has not been upgraded from a previous version of Windows.
  I tried the Driver Booster to see if it would be the auto scan, detect and install fix it but it didn't.
  I got the Lan/Ethernet is finally working.

  Hello:

  This driver installs usb, not the chipset driver controllers... (the last driver that I posted on my first answer).

  Download, unzip and run the setup.exe file.

  https://Downloadcenter.Intel.com/download/25687/us B-3-0-Intel-USB-3-0-Driver-for-Intel-NUC6i-x-SY

  According to the specifications of product for your laptop, the USB driver above must have worked.

  If the usb driver 3 above fails to install the usb controller...

  Please view the the hardware ID for the USB controller requiring driver.

  To find the hardware ID, go the Device Manager and click on the usb controller requiring driver.

  Then click on the Details tab in the upper part of the window of the USB controller.

  Now you will see a drop-down list of property, and it will be set to the Description of the unit.

  On this list and select the 2nd (Hardware ID).

  After the first string of characters you see in the window.

• HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

  I was faced with a clean install of windows 7 on my laptop for 2 days now. I'm going to sleep after I post this so feel free to help others who are online, but if no one else needs help I have little material ID's which need pilots. I would be very grateful, because it is the last step, I need to finish my installation.
  
  Ethernet controller:
  
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C & REV_0A
  PCI\VEN_10EC & DEV_8136 & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D31 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D31 & CC_118000
  PCI\VEN_8086 & DEV_9D31 & CC_1180
  
  ICP data and acquisition and signal processing controller
  
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C & REV_08
  PCI\VEN_8086 & DEV_1903 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_1903 & CC_118000
  PCI\VEN_8086 & DEV_1903 & CC_1180
  
  PCI device
  
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C & REV_01
  PCI\VEN_10EC & DEV_522A & SUBSYS_80A4103C
  PCI\VEN_10EC & DEV_522A & CC_FF0000
  PCI\VEN_10EC & DEV_522A & CC_FF00
  
  PCI memory controller
  
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D21 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D21 & CC_058000
  PCI\VEN_8086 & DEV_9D21 & CC_0580
  
  PCI simple communication controller
  
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D3A & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D3A & CC_078000
  PCI\VEN_8086 & DEV_9D3A & CC_0780
  
  SM bus controller
  
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C & REV_21
  PCI\VEN_8086 & DEV_9D23 & SUBSYS_80A4103C
  PCI\VEN_8086 & DEV_9D23 & CC_0C0500
  PCI\VEN_8086 & DEV_9D23 & CC_0C05
  
  It is the last of the drivers I need. It was certainly a pain get here without any connectivity USB wireless drivers as well as figuring out how to attach the USB 3.0 drivers to my installer of windows 7, but it's in the past now. Thank you much in advance.

  Hello:

  You can use the W7 x 64 drivers and the software of this model to yours except the BIOS and firmware files.

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-ab000-notebook-PC-series/7771366/model/8542715

  The drivers you need for the ID you posted in the order that you posted the...

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp71191.exe

  ICP data and acquisition and signal processing controller x 2:

  This package contains the driver which allows Intel platform dynamic and thermal firmware setting. Intel platform dynamic and thermal environment information system temperature and power use for the thermal protection of the system to work properly. This package is provided for the laptop models running a supported operating system.

  File name: sp71185.exe

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp71189.exe

  PCI memory controller?  Don't know. Can be installed from below driver chipset.

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp71183.exe

  SM bus controller: Note: install first this driver and restart.

  This package contains the driver and Intel Chipset Installation Utility for the notebook models and operating systems. This utility allows the operating system to show the correct name for the Intel hardware that is installed in the Microsoft Windows Device Manager.

  File name: sp73543.exe

• Re: Need help with the installation of Windows XP Home on my Equium A120-17I

  I really need help here, I need to know with certainty whether someone has already managed to install Windows XP on their laptop Equium A120-17i?

  For now my all new laptop is useless with a new copy of XP is not working due to driver problems.

  I need drivers for all but impossible to find the right everywhere-

  Pilots to operate wireless
  Drivers for sound.
  Drivers for graphics (Radeon X 1200)
  and there are 3 points to mark more yellow in the Device Manager I have no idea what they are!

  I know this has been asked before but someone at - he managed to install again and can point me in the right direction?

  Thank you, Dan!

  Can you please check laptop model name again. Please send the number of model also. Something is wrong with the name displayed for laptop.

• L20-120: need help for installing Windows XP

  I recently bought a laptop Toshiba L20-120 with the operating system of Windows XP in German but would like to install the English version. I need help on how to on this subject. I have Windows XP 2002 edition, is this compatible or that we should install? Some help me please as soon as POSSIBLE.

  Hello

  If you want to have the Windows operating system in English, therefore install the Windows in English form the original CD of Microsoft.
  All English Toshiba drivers you will find on the page of the Toshiba driver which you will find under this link:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• need help with my window is in thai and I do not understand to all.how to convert to English?

  need help with my window is in thai and I don't quite understand.
  How to convert to English? I tried for days but still it cannot be changed.
  because I can't read thai... Please help me step by step...

  my pc is touchsmart 9100 windows 7 Professional.

  Not a single word is in English if I go to the "region and language" to change.

  Everthing is in thai in the system.

  Hello

  Where have you bought the PC?

  What is the operating system installed?

  Best regards

  ERICO