HP Pavilion - 15 t-ab100 CTO: need help from Windows 7 drivers

Similar Questions

• Need help from Windows Vista Home Prenium COmpaq CQ6-420 us

  I need help my laptop has only 1 year and the hard drive that came with it is a failure and the warranty is over, I need help

  Buy a new hard drive and reinstall Vista.

  How to get the recovery media Vista to make it back to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s since the Partition of recoveryin case of hard drive failure or System Crash.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with Windows 7 drivers for Radeon HD 7670 m on a preinstalled Windows Pavilion g6-2300sy 8

  Hey, I recently bought a HP Pavilion g6-2300sy with Windows preinstalled 8 and decided to install Windows 7 on it instead, as I'm rates more familiar with it. Now I seem to be running into issues with the Radeon HD 7670 m laptop graphics card, since I can't find a driver that works for her. I tried several generic drivers AMD HD 7000 series, but none of them is not working - Windows continues to give the error code 43.

  How can I fix without going back to Windows 8? Any help would be really appreciated.

  Hello:

  For the g6-2300sy, use the W7 x 64 drivers and software for this model:

  For the graphics, you install only the AMD graphics driver. Do NOT install the Intel driver.  The AMD driver has the graphics for two video cards.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4063&product=5278311&softw... =&

• Satellite Pro 4200 - need help for Windows 95 & drivers!

  Hello! Years ago my mother, I bought a fully functional, great Toshiba Satellite Pro 4200 working the place taken sales... Since that day, my laptop has not been used. But now, I found a few games nostalgic childhood of mine, who works only with Windows 95. I wanted to play, and I decided to install Windows 95 to my laptop. The installation process went well, it was a bit complicated at first because of the startup disk and such. But I managed to install a working fully Windows 95 in my laptop! But it gives me only 16 colors and no option to choose the resolution! So I found out that I need to install the video card drivers.

  I have google a bit and discovered that my laptop has chart S3 Savage IX. I failed to find the appropriate drivers for it. Until I went to your site to support canada and traveled for a pilot of similar laptops. I found Windows 95-98 compatible drivers for my card. The installation process was easy, is well past and fine! I then could choose 256 colors and another resolution (which I did not actually change...). I changed the colors and then restarted. Everything went well until windows 95 logo screen came suddenly to the top and after that I only saw colors and black borders. He did not start Windows properly. What can be wrong? At I have download the wrong drivers? Windows told me 2 different versions, IX and MX. I tried them both. Tried to change the Hz also, but nothing helped. Please help me!

  Thanks in advance,
  Jupstejuho of Finland.

  P.S Sorry for my bad English...

  Edit: OH, BTW is the exact version of my OS: Microsoft Windows 95 Finnish b with USB support (I Don t know the version very very accurate actually... but I just mention that it is version B of the operating system.) Could this be the problem? I also tried the same driver downloaded from toshiba europe Web site, but it won't let me just install the drivers 'already installed' and they really are. I did not uninstall them, I tried to run the uninstall utility, but it doesn't work...!

  Post edited by: jupstejuho

  Hello!

  Maybe chose a resolution not supported?
  This happens to you at all resolutions, or only one?

  Normally, you can download all the drivers on the European site of Toshiba, but I only find Satellite Pro 4220, 4240 and so far but not 4200.

  However, have you tried to do a BIOS update?
  Before installing the graphics driver, you need to update the version of DirectX.
  You can find the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  Good bye

• I started my system, unfortunately I forgot to backup all bookmarks on firefox, how could I get these bookmarks in firefox need help from your server

  Hi, friends
  I started my system, unfortunately I forgot to backup all bookmarks on Firefox, now how do I get these bookmarks in Firefox need help from your server

  Start or restart to activate something, or restart.

  Did you format your hard drive or re-install Windows?

  If you did a reinstall of Windows, look for a folder.
  It can be called old windows. Check the instructions that you were given.

• need help with windows live on my Vista free download

  I need help download Windows Live with my Vista operating system.  I get a screen popup telling me to "Get Windows Platform Update."   I have the following message.  When I check all my updates, none of them appear.  What I am doing wrong?

  1. In the list, select one of the following updates. (Only the update that applies to your operating system appears.)

  2. Update for Windows Vista (KB971644) platform

  • Platform Update for Windows Vista x 64-based Systems (KB971644)

  • Platform for Windows Server 2008 (KB971644) update

  • Update for Windows Server 2008 x 64 Edition (KB971644) platform

  Thanks for your help!

  This forum is for Microsoft Security Essentials, not Windows Live.

  You have to get help from Windows Live Support and Forums:

  Here is the Solution Center: http://windowslivehelp.com/product.aspx?productid=10.

  This is the only Forum for Windows Live ID: http://windowslivehelp.com/forums.aspx?forumid=d3fda415-1e53-4007-8e0c-2a77180ffb1d.  This is where you post for assistance.

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Hey ~ I need help in Windows Media Player 12, remove album art!

  Hey ~ I need help in Windows Media Player 12, I got some song I want to add in the album art, but I had a song I add in a hard cover and I can't remove... so pls help

  Hi VX-savers,

  Thank you for using the Microsoft Forum.

  Permanently remove the Media Player 12 album art:

  (1) you can click on View (WMP12),

  (2) choose the columns.

  (3) turn off the Album Art box, and you're done.

  Before performing this operation activate windows to show hidden files:

  (1) open the computer,

  2) click on tools, located on the top toolbar.

  (3) then Folder Options.

  (4) then click on the view tab, and then look for the element that shows the hidden files, folders and drives and check this option.

  This is where the cache. Find and remove.

  Windows 7 Media Center has its own cache of album art, where he recorded the album art thumbnails (Windows 7-cache):

  C:\Users\USERNAME\AppData\Local\Microsoft\eHome\Art Cache
  (with the corresponding "USERNAME").

  For more information : http://social.technet.microsoft.com/Forums/en/w7itprogeneral/thread/3552ec2d-d510-49ec-985c-1fc04c3d6da6
  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/thread/0b3e71b3-9b85-4d0a-987C-e7b52677840d/

  I hope this helps.

  Thanks and greetings
  Azeez Nadeem-Microsoft support

• HP Pavilion p6510t won't start, need help!

  Hello, we have your desktop HP Pavilion p6510t with the following specifications:

  HP Pavilion p6510t PC

  • Genuine Windows 7 Home Premium 64-bit
  • Intel (r) CPU Pentium (r) Dual-Core E5400 (2.7 GHz, 2 MB L2, 800 MHz FSB)
  • SDRAM DDR3 800 MHz 4 GB [2 DIMMS]
  • 320 GB HDD at 7200 RPM SATA 3 Gb/s
  • Microsoft Office Starter 2010
  • No additional security software
  • Integrated graphics - Intel(r) Graphics Media Accelerator X 4500 [VGA]
  • No speakers
  • LightScribe 16 X MAX drive DVD +/-R/RW SuperMulti
  • Built-in Ethernet port, wireless
  • Audio Reader, 2 USB, 15-in-1 memory card
  • No TV Tuner
  • Integrated sound
  • HP USB keyboard and optical mouse

  We also bought this monitor to her (though I doubt it's important in this case):

  HP S1931a 18.5 "diagonal LCD screen

  The problem started about two months ago when the computer turns off without reason then that slowed down (before sleep should have started). After the computer restarts, he gave the beep codes that there was a problem with memory (1 short beep, 1 beep, long pause, repeat) long. After power back off and remove all devices and the power cable, the RAM has been removed (2 x 2 GB), checked for dust, bad seats, pins bent, etc...  The 2 RAM sticks have been resettled and the problem seems to be resolved.

  Fast forward two months (a bit more under warranty), the same problem occurs. This time, replace the RAM has not fixed the problem. Sometimes the computer should boot properly and then randomly cut regardless of what the processor was doing (idle or under load of 25% or more). In addition, beep codes would perhaps only half the time where it would not start. The output has been verified for feeding and another (proven) outlet has also been tried. No change. At this point, the computer won't be enough for any start screen at all, not even a blue screen.

  What he do to power on:

  • All powered fans (power supply, fan CPU cooler, case) and a spin at full speed.
  • Hard drive to wind up.
  • Green light on the power supply remains stable.
  • VA CD drive open and close normally.

  What is does not power upward:

  • No display at all.
  • No beep codes.
  • No blue light on the button walk / stop (top of case).
  • CPU does NOT get hot to the touch after 5 seconds to be under tension (with the fan and the heatsink removed and unplugged).
  • With two strips of RAM not removed, no beep of any kind.

  I also tried to use an old video card, I had to hang out, thinking that maybe the onboard graphics card were no longer works. The video card gets power as his fan runs, also at full speed. Still no display.

  I already bought a pair of replacement RAM sticks, exact same specifications and brand (Crucial), no difference. I tried all combinations of each stick into each slot with the original of the RAM in the first place, so I assumed it was sticks and replaced. Now that the RAM has been replaced and no beep codes, I suspect the motherboard or the CPU.

  I also tried to reset the BIOS by removing the battery for 10 + minutes and also move jumper to 2-3 1-2 during 10 seconds and replace (with power off).

  What I want to know is which component I need to replace to get this computer working before its tax season. I'd like to think it's the processor, because it remains cold to the touch after turning on. If this is the case, can someone confirm that this is a suitable replacement? (Intel Pentium E5700 Wolfdale 3.0 GHz LGA 775 65W Dual-Core processor desktop BX80571E5700) http://www.Newegg.com/product/product.aspx?item=N82E16819116381

  If it's the motherboard (I hope not), it can be replaced without having to re - install windows? I can't find an exact replacement for the H - I41 - Μatx Foxconn (Eton). HP has one of these in stock that could be shipped out?

  I know that the computer is already out of warranty (barely) and can do the work myself, but need help to determine the problem I want to throw the money to do this work right.

  Thank you in advance for your help!

  John

  Hello jkalbin, I think a bad mother rather than the processor card. Chess with the processors don't happen often at all. You should never feed a computer with radiator/fan all not attached to the processor. Just 5 seconds without the radiator/fan could easily burn a processor.

  The fact that the processor had no hot does not mean it does not work, if the motherboard does not send power to the processor.

  Motherboard failures are many times more often than the failures of processor. I had one processor to fail in more than 25 years of working with computers.

  Just some thoughts.

• Bluetooth problem on my new laptop HP Pavilion G series and really need help!

  I recently bought my new laptop and yesterday when trying to send a picture from my phone to it, files have not been sent, even though she said the phone and the laptop were connected, he mentioned something about Image push, but I am new to HP, so I'm not aware of what exactly is and desperately need help Please could someone help me with this, I would really appreciate that I could not yet send the file via bluetooth. Thanks in advance!

  D3,

  You said,

  "bluetooth device has not been successfully installed.

  You said,

  ""photo from my phone it it was settled, but it says ' unable to connect ' "." "

  I'm a little confused by what you say, but I do not understand 'unable to connect '.

  • It's time to go back to information I sent you and go through the installation program.
  • You can also use the HP connection manager to help you get the job done.

  Here is the Connection Manager software.  Download and install it.  Your computer already has the software, it's going to tell if the package will install...

  HP sp54945 V4.1.25.1 Connection Manager

  Once the software is installed...

  And you want to use the HP Connection Manager software.

  • Make sure that your wireless network is enabled,
  • Then look in your taskbar for your Connection Manager icon and
  • Double-click to start

  If you do not see the icon in the taskbar, you can do the following:

  Start > search / type "HP connect" >

  Click on 'Hp connection manager' when you see it in the start list

  This is a HP Connection Manager Help file.

  The document explains how to use the software to connect your Bluetooth devices (and wireless):

  Connecting to a network with the 4.x connection manager

  Good luck!

  ----------------------------------------------------------------------------------------------------------------

  When you appreciate the effort...

         Please click on the Star Bravo on the left to tell "thank you"! ""

      Is it solved? Make it easier for other people to find the answer:

  Please Mark my Post 'accept as Solution' to say "Yes!"

  Remember: the more information, help, best you , you can receive.

  Always include: (Notebook) product number , printer - model number ,.

  Operating system and a Description of the error

  Never give your serial number

  ----------------------------------------------------------------------------------------------------------------

  2012 the year of the Dragon!

• HP Pavilion HPE h8 - 1070t CTO need case fan

  HP Pavilion HPE h8 - 1070t CTO, product number: LP028AV #ABA

  After an error message, on the fan and case fan noise I replaced the AVC DS09225R12MC234 DC 12V case fan 0. 3A with a Startech.com FAN9X25TX3H case fan.

  A program to monitor I have shows an increase in rpm of the system another fan. I'm trying to find out if my new fan is correct or adequate propper case fan.

  Hi checkit, as long that all fans are working and they doesn't make unusual noises or work allways on the maximum RPM is fine, Adi.

• I need help on Windows 2000, I need to upgrade my programs to work with my camera printer etc.

  Hi I need help please im a female and cannot say I'm good at pc, I have a computer on which the player has stopped working and I gave another is very basic and does not support my printer, camera, can't do the plugs to work is a windows 2000 and I would like some advice to try to get the pc works as I have a small business that relies on the photos etc as I have some - what sale dresses, someone can help me please? I'm sorry you disturb many thanks Tammy

  Hi Tammy,

  The question you have posted is related to Windows 2000 and would be better suited to the community of Microsoft Windows 2000. Please visit the link below to find a community that will provide the support you want.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.win2000.General

  Concerning

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Infected Winlogon.exe and explorer.exe accidentally deleted on XP Pro PC - need help from recovery console

  Hello

  Windows XP Pro SP3 Dell Optiplex and been infected by Trojan in winlogon exe files and Explorer. AVG asked me if I wanted to force deletion and I foolishly agreed. Now, I get the BSOD and the message 'Windows logon done unexpectedly '.   It is a work PC and the CD only we have is the Dell CD to re - install and I know that I need as the first step recovery console. I don't know if the recovery console is on it, and then I need help for the uncomprressed explorer.ex_ and winlogon.ex_ and in their right place.

  I'm not a total newbie, but it's been some time that I used the recovery console.

  Help?  Thanks in advance and greetings to all

  Morey

  Try to be more specific with the error messages you see, so it does not guess or try things.

  Here is an example of a popular error message that sounds like yours (maybe):

  STOP: c000021a {fatal system error}
  The Windows logon process ended unexpectedly with the status of 0xc0000034 (0 x 0000000 0000000 x 0).
  The system has been shut down.

  What exactly tell your message?

  There should be copies of XP system files backup all critical already on your hard drive in the windows\system32\dllcache folder (it is this case), you may not need any expansion.

  I would like to see the exact error message, make a CD bootable Recovery Console, run chkdsk/r even if he doesn't find anything to do and then see the replacement of missing persons or suspicious files, either by copying it in the backup copies of replacement of the recovery, or from another CD Console, you can do if the Recovery Console gives you a hard time (first do the CD Recovery Console).

  First of all, you need to start on something...

  You can do a restore bootable XP CD as follows:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that may have come to a store to purchase the system.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the command prompt.

  Start by checking the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Do, or do not. There is no test.

  I decided to implement the points for a new puppy instead of a pony!

• Need help with Windows XP to Windows 7 upgrade. Says I need more free space on my hard drive.

  I've used Windows advisor, and he says: I need 20 GB of free space to install Win 7 and I have 6 free on a 40 GB drive, when I remove the XP will this free up enough space?

  I've used Windows advisor, and he says: I need 20 GB of free space to install Win 7 and I have 6 free on a 40 GB drive, when I remove the XP will this free up enough space?

  Probably not.

  See: http://windows.microsoft.com/en-au/windows7/help/upgrading-from-windows-xp-to-windows-7

• need help with windows vista

  I need help, 1 there is an error code 10 on Teredo Tunneling Pseudo-Interface, it indicates that the driver is unable to start. I click on find the solutions button but nothing happens. When I click on the button to update the driver it says it is already up to date. It cannot roll back the driver while he was working properly.

  2nd, Windows Firewall cannot be turned there an error 0x6D9 code and it tells me still the firewall of windows with Security Advanced snap-in failed to load. It allows me to change anything.

  3rd my computer cannot access the internet, it says it cannot detect a connection even if it is connected directly to the modem, in addition, a message indicates the dependency service or group was able to start.

  When I run a diagnostic and repair the check it tells me that the DHCP is not running on my computer. I unplugged my modem and plugged back there and still no Internet. This is a result of the issue of Teredo Tunneling pseudo-interface or it is a separate issue

  Hello

  Question: Error code 10 on Teredo Tunneling pseudo-interface.

  Teredo is a tunneling protocol designed independent platform to provide IPv6 (Internet Protocol version 6) connectivity to nodes that are in IPv4 networks. Compared to other similar protocols its particularity is that it is able to fulfil its function even behind network address translation (NAT) devices.

  The Code 10 error code is generated when the Device Manager does not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.

  Check the steps from the link below and see if the error code 10 disappears.

  http://support.Microsoft.com/kb/943104

  Question: Error 0x6D9 when it turns on the Windows Firewall

  Run the Fixit from the link below and see if Windows Firewall can be started or not.

  http://support.Microsoft.com/mats/windows_firewall_diagnostic

  Question: Cannot access the Internet

  What browser do you use to access the Internet?

  Perform the steps from the link below and see if you can access the Internet.

  http://support.Microsoft.com/kb/937151

  Answer please if you have any questions.