Need help with a propagation centre put in place for my printer...

Similar Questions

• I need help my Webcam setting and put in place.

  I NEED HELP MY WEBCAM SETTING AND IMPLEMENTATION. I BOUGHT IT USED

  I need help my Webcam setting and put in place.

  Thinking about ask you for help using Bing, Google or any search engine you want to use.  Try entering "set up the webcam" in your search parameters.

  Or ask for help on the Web site of the manufacturer of the webcam that you have purchased.

• Need help with the IP configuration on vm ware for the installation of 11 GR 2 on linux vmware 6 on win7

  Need help with the ip configuration on/etc/hosts for the installation of 11 GR 2 on linux vmware 6 on win7.

  Let me know if you need more info... in fact I have a setting error while installation said

  -(/ etc/hosts has no correct entry for the host name)

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Thank you...

  (host computer)

  Win7 64 bit

  (vmware)

  Oracle Linux Server 6.3 version

  Release of Red Hat Enterprise Linux Server 6.3 (Santiago)

  Oracle Linux Server 6.3 version

  -(/ etc/hosts has no correct entry for the host name)

  Then post your/etc/hosts.

  Host: 192.168.85.100

  Win7 ip: 192.168.1.x

  Why 85? have you tried 192.168.1.100?

• Need help with the driver 64 bit, Win 7 for Photosmart C8180

  Hello. I downloaded the 64-bit driver for Windows 7, the Photosmart C8180 All-in-one. It shows the download link, the download for 64-bit file is the same file as the 32-bit file. However, I downloaded one that says that it is for the 64-bit Windows 7, in any case. http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3204...

  I uninstalled my printer. I clicked on my new .exe file, which was supposed to be for Windows 7, 64 bit. Installed just fine. However, when I go into Device Manager and my printer, it shows that the driver is a 32-bit. (which makes sense, since if you look at the 64-bit, or 32-bit download, both are the same file.)

  I have a program on my computer it is more precisely a 64-bit program, and it let me use the ability to scan, until my all-in-one printer has a 64-bit driver. I think HP has accidentally put even tranche under the 64-bit file as they have under the 32-bit download. Anyone come across this or know what I can do?

  Thank you!

  Honestly, I think that is what is happening, you should have the driver correct 64 bit for your printer.  Since you mentioned, that they just released the 64-bit program, it is also possible that it may be a relatively new problem which they are ignorant.

  I have two recommendations for you.

  One would be to get back in touch with them and let them know that you have installed 64-bit drivers and it may be a problem with the program.

  The only other option I can think would use the 32-bit software, although I know that you really want to use the 64-bit software.

  I'm not familiar with their program enough to know what could possibly be the cause of the Analyzer must be gray and not recognized, especially if it worked before when you use the 32-bit software.

• Need help with using MSN, called Khamtechnologies or Procomsupport247 for assistance.

  Original title: technical support

  Someone had agreements with Khamtechnologies or Procomsupport247?  My wife called the number of MSN support and getting first Khamtechnologies, then more recently Procomsupport247.  Procomsupport247 has done Khamtechnologies bankruptcy and that they were the new people tech for MSN.  The two companies have charged us for their technical support.  They want only to sign up for a multi year service contract.  SER these scams?  Any help would be appreciated.

  Hi WebbyDoo,

  The support that you have contacted seems to be a third party support. I suggest you refer to the Microsoft article below for more information about the calls of the scam and how to avoid the scam calls.

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  I suggest you refer to the Microsoft Support article to know how to contact support MSN to better help.

  How to contact MSN customer service:

  http://support.Microsoft.com/kb/940784/en-us

  Please do not hesitate to visit our Web site for any help with the Windows operating system.

• Need help with vShpere 5.5 put

  Hello

  I have two questions, I hope you help me with the answers.

  I have vCenter Server 5.5 with SSO on the same server can I upgrade to vSphere 6 with external PSC or the only opetion is with embeded PSC?

  If I go to the implementation of the green field which is the best method to migrate the virtual machines and the candidates less downtime?

  Thank you

  I have vCenter Server 5.5 with SSO on the same server can I upgrade to vSphere 6 with external PSC or the only opetion is with embeded PSC?

  You can upgrade to a PSC external, have a look here: vSphere upgrade of embedded SSO SSO external (PSC) 6.0 5.5

  If I go to the implementation of the green field which is the best method to migrate the virtual machines and the candidates less downtime?

  And here's how to migrate a vSphere, ESXi to one vCenter to another: VMware KB: move a managed ESX ESXi host to a vCenter Server to a different Server vCenter

• Need help with my Toshiba remote control and receiver for Qosmio G30 161

  Hi all

  I have a Toshiba Qosmio G30-161 and with her, I have a Toshiba remote and a Toshiba remote control receiver, this is the first time that I used it (tried of that is), my problem is that the remote control does not work on the computer, when I press keys on the computer program does nothing.

  I installed four new AA batteries and the remote works fine its send signals to the receiver, the receiver of the remote control as a red light detection is displayed whenever you press a button and with regard to the computer, I checked the drivers and the USB is off the hook as a remote E-reception receiver which I checked with Toshiba and which is correct , so overall the remote control works, the receiver is picking up signals and the pc has detected the receiver but nothing works, I have installed remote control manager but was still nothing done to. I talked about support and assistance of Toshiba, and the end result is that they are not sure what is the problem. Can anyone help I need the remote control for the slide shows for clients like ja? m a photographer.

  Also to confirm that I'm under addition of Windows XP MCE.

  Anthony Worlock

  Hello

  This remote will work, if you use it without any special drivers and special software, only in the Media Center.

  But if you install stuff like [WinLirc | winlirc.sourceforge .net] then you should be able to get some functions for your presentation.

  Please try this tool and check if it works.

  By the way: if I were you I would first read the manual and the WinLirc FAQ before you start because it s a little bit tricky to manage the program. :) (Too many parameters: D)

  Welcome them

• Need help with the fix KB 900243... for use high CPU with file W3WP.exe

  SBS 2003 Enterprise.

  This hotfix contains two files:

  1 WIndowsServer2003-KB900243 - x 86 - enu.exe
  2 WIndowsServer2003-KB900243 - x 86-symbols - enu.exe
  Which of them install?  Or if the two, what order.
  Thank you.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Need help with coding for HTML5 with emergency Flash video

  Hello, need help with my coding in Dreamweaver CS5.5 for HTML5 with emergency Flash video. Not sure if the coding is correct. Do I need any other JavaScript etc.?

  

  Another thing is that you don't have to include SWF as aid manual if you provide all 3 ogv, webm & mp4 video formats as one of these formats will certainly be played in any browser that is fully compatible HTML5.

  Still one thing you could do if you don't mind hosting your video on Youtube is to get an embed code for Youtube - in this way, you don't have to convert all the files. YouTube will do it for you and it will play on devices of HTML5 as well as supports Flash player of relief for devices that cannot play HTML5.

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• I need help with my Windows Media Center. I was not able to get any video on my Windows Media Center.

  original title: I need help with my Windows Media Center.

  I was not able to get any video on my Windows Media Center. How do I do that? I can put it on Facebook, but cannot get them on the Media Center. I'm ready to pull my hair out LOL

  Hello

  1. what exactly happens when you try to play any video on media center to Windows? Error message? If so, then post back the exact error message.
  2. were you able to play videos on Windows media center with no problems before?
  3. don't you make changes on the computer before this problem?
  4. are you able to play the videos on Windows media player?
  5 are supported by Windows media centerfiles?

  Answer to the above mentioned questions could help us help you better.

  The following article might be useful.
  Solve problems with DVDs and movies in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-DVDs-and-movies-in-Windows-Media-Center

• need help with windows update C8000F1A error code

  I need help with an error code that is given to my PC when I try to put up-to-date

  Hello

  1. don't you make recent changes?

  2. This does happen with any special updates or all updates?

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:
  I suggest you follow the steps in the link below and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  It will be useful.

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices

• I'm on Acrobat 10 and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciat

  I'm on Acrobat 10 for mac and I need help with the distribution of shape feature. Is there a way to change the registration e-mail download addressed to the? Currently all forms I create and then distribute may only be subjected to my email account... I appreciate any help!

  Do not use the feature distribute the form. Instead of this, just put up a button "submit" and configure it to send email using any email address you want. Just add a button and set the action of the mouse upward on "Submit a form" and use a type mailto URL and specify that you want to send the full PDF. Then activate the reader of the document: where "Advanced/extended features in Adobe Reader" is located in Acrobat XI?

  If you really want to use distribute the form for some reason, change the e-mail address in your preferences: Edit > Preferences > identity > Email address