Need help with a user of 95
Ladies and gentlemen:
I'm an old geezer trying to set up a Win 7 PC for use by my 95 year old mother. His old Win XP PC disintegrates. She is very attached to his computer. However, not only did she have macular degeneration (it must use ZoomText to see his PC), it also simply can not learn something new about computers. She only uses Outlook Express, Word 2000, and surfed on the internet (she could not adapt to the changes in all new versions of browser).
I installed a VM Ware Player and Win XP and its familiar programs. What I have a lot to accomplish implements new PC to start directly in the virtual machine and the copy of XP, just as if MOM were using his old PC.
My computer skills only go so far; and not far enough. I searched for hours and found the following about starting automatically in the guest operating system:
Install VM Server and make the settings in it. I do not want to do. I struggled for weeks, setting up what I already have.
I found this in http://www.networknet.nl/apps/wp/archives/356:
"Tried to automate the process to have a script or a shortcut to automatically start a virtual guest with VMWare Player? After login, you can start VMWare Player and locate the virtual machine or click on the recent but still you need control this process. Maybe you want to start the virtual machine to start the system with scheduled tasks or ask a user to click on a specific shortcut to a pre-created virtual computer, he needs to test.
I created a small script that can be used for this process. Create the new file in Notepad and paste the commands below. Make sure that the VMWare Player installation path is correct and the location of your VMWare host.
Off @Echo
Script cmd to start guest virtual REM VMWare Player
REM Ivan Versluis @ Networknet.nl
REM by e-mail: [email protected]
REM Date: 29/01/2008
"'C:\Program VMware Player\vmplayer.exe'"C:\VMWareGuests\Server\Windows Server 2003 Standard Edition.vmx""
Unfortunately, even though I know what are the scripts and have downloaded and used some of them, I can not write nor do I fully understand their. In the case prior to that (which seems to be what I need), I don't know where the "script" starts or ends or exactly what to do with the information contained in the article.
I would much appreciate it if someone could help me with the above information, or better yet, for me, write a script that I could download or copy and use.
Thank you for your help in advance. JFW
To add to my previous post...
Click on the circles to start > all programs and then right click on start and select open.
Click on the round of departure > Documents > VMS > [name of the Virtual Machine]
In the [name of the Virtual Machine] folder right click on the file which has a an icon of three boxes that overlap with the name of the virtual machine and choose Create shortcut.
Drag the shortcut to the startup folder
Right click on the shortcut and change the target: text box add the following in front of what is already there.
For Windows 7 32 bit, is the default path for VMware Player:
"C:\Program Files\VMware\VMware Player\vmplayer.exe" -X
For 64-bit Windows 7, the default path for VMware Player is:
"C:\Program Files (x86)\VMware\VMware Player\vmplayer.exe" -X
Click OK
Double-click the shortcut to make sure it works.
Now with a shortcut in the startup during the initialization of the host and the user folder to connect to the computer virtual will automatically boot full-screen.
You can even put a copy of the shortcut on the desktop as well as to facilitate access to the need.
Tags: VMware
Similar Questions
-
Need help with my - USER ACCOUNT.
Dear Sir, you said already in the message-1 Help I need is with - ma-user-account-like it turns off image every 3 minutes and displays on the screen-newspaper-on-stella reed-standard, but I have never loged - in addition I am the ONLY USER, on my user image at the beginning he said STANDERD but inside now says ADMINISTRATOR, also tried to changed again to the standard account , but it won't let me, has had this problem for 4 days now of all stop sending every 3 minutes, am not able to fix it myself.
Hi Stella,.
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are facing problems with your user profile.
This could be due to the corrupted user profile.
I suggest to create a new user account and check if the problem persists.
Check out the link:
http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7
You may consult:
http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7
Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.
-
I really need help with win7 users in c: drive Security tab help
I noticed that this laptop is really slow, even after a fresh reboot. Now when I open the Task Manager it is about 9 processes running. When I click on the 'show processes from all users", there are 58 running. BUT users in 'control panel' are mine ALONE.
When I click on the C: drive, and open the 'SECURITY' TAB in the properties there are 4 users there... 2 of my friends (1 Director 1 reg) 1 - System. and a "authenticated user: listed.". I want me and I DON'T WANT ALL THOSE LAPTOP SLOWDOWN THIE PROSESSES. I tried to remove them (System and user auth.) but then got locked out of the system and had no. CHOICE but to the reboot...
HOW to remove these WHILE I running for the process?
theres about 12 svchosts.exe and various other programs running (which i disabled an IOBIT system tool with Advanced Care) but they all run WHEN I click on the "show processes from all users in the Task Manager. I want ONLY the USER MY processes
?????????????
Why do they have to run in a different user when the user IS NOT in the "USERS" TAB CONTROL PANEL and ONLY in the Security tab, on the C: drive?
Please help me to get this laptop as it is only not for long, when a 36K modem was the fastest thing there is...
PLEASE HELP ME BEFORE I THROW THIS THINGOFF A WALL
Hi Tony
What you describe is normal for the operation of Windows.
The user of the System is required to manage all the required Windows system processes.
Svchost.exe is the host of Services controller which is necessary for all Windows Services to run correctly.
Authenticated users is a Group of users and is visible when any user with a legitimate user account, is connected to the computer.
You can simply have your user account only running Windows.
Concerning
-
Need help with creating user hr
Question
To perform the requested operation, an error has occurred:
ORA-01045: user HR has no privilege CREATE SESSION; connection refused
01045 00000 - "user %s has no privilege CREATE SESSION; connection refused '.
* Cause: A connection was attempted to a user name that does not
create session privilege.
* Action: Grant the CREATE SESSION from the user privilege.
Code provider 1045
SELECT * FROM DBA_SYS_PRIVS WHERE DEALER = "HR";
No outputSELECT * FROM DBA_ROLE_PRIVS WHERE DEALER = "HR";
No output
Finally did this:
ALTER USER DEFAULT ROLE CONNECT HR;
Again gives errorALTER USER DEFAULT ROLE HR CONNECT
Error report-
SQL error: ORA-01955: DEFAULT ROLE "CONNECT" not granted to the user
01955 00000 - 'ROLE '%s' not granted to the user by DEFAULT'
* Cause: Modified user does not have the specified role granted
directly to the user. Note that the secondary roles can be used in the
default role clause.
* Action: Grant the role to the user.
In fact, it's delicate. The HR schema is installed for Oracle 12 c installation of database. However, it is locked or hidden. You must unblock with instructions as below.
Select * from v$ PDB;
Select name from v$ active_services where con_id = '3';
change the container set session = pdborcl;
ALTER database connectable to open;
ALTER user identified by HR HR account unlock;
Tutorial is here:
-
New user needs help with the creation of an animation :)
Hello
IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.
I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do
Would appreciate any help!
There are several ways to do so.
One way would be to create a title with the name and title with the password. Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.
-
I need help with an installation failure to interpret and troubleshoot a Setup log.
Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects. Shared Apple Final Cut X uses a different format that is not compatible with FCP6. Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.
Starting with OS X Lion, FCP6 would install not in Lion and thereafter.
According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle. He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.
Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:
https://discussions.Apple.com/message/26309669#26309669
I used this method with success to install FCS2 in Yosemite:
[click on images to enlarge]
However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:
First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along). I am unable to find such a method to post here.
Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:
If this element is not required, then maybe FCP6 can be installed successfully without it. And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.
It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.
Here is the post on MacRumors with pre-installed Setup log:
-
Need help with the launching track pack for forza code 4
Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
This is the help I get when the cat to an Ambassador xbox on xbox.com
Terry wrote:Need help with the launching track pack for forza code 4The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Location of Ambassador of the community...The Xbox Ambassador says:Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]The Xbox Ambassador says:HelloTerry wrote:HelloThe Xbox Ambassador says:HeyTerry wrote:just to be on the phone to xbox live support and was told to come hereThe Xbox Ambassador says:ok\The Xbox Ambassador says:What is your problem?Terry wrote:I bought the 4 for forza ansd 360 new sealed Christmas...Terry wrote:has got 2 codes that accompanies the game but the pack track code does not workThe Xbox Ambassador says:Wow goodTerry wrote:whenever I put in the code it says code redeemedThe Xbox Ambassador says:I think the code is used. You must return to the retailerTerry wrote:I tried to, but since I already opened the case they will not acceptThe Xbox Ambassador says:Oh. No,Terry wrote:the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is openThe Xbox Ambassador says:Maybe it was auto bought?Terry wrote:so, how do I get another code generated track Pack if defective?The Xbox Ambassador says:I do not know.Terry wrote:bought the game new, so I get the track packThe Xbox Ambassador says:Oh. It's bad.The Xbox Ambassador says:I think that if you Exchange 1 code it will buy itTerry wrote:car pack code worked, starter pack did not workThe Xbox Ambassador says:Oh.The Xbox Ambassador says:It's a badThe Xbox Ambassador says:BTW you have an evolution of the tests?Terry wrote:Yes, I want to? but more anxious to get a code object generated for this packThe Xbox Ambassador says:Hey if I help can u give me this game too?Terry wrote:?????????????????Terry wrote:So is it possible to get a code for that time?The Xbox Ambassador says:HeyThe Xbox Ambassador says:Yes.The Xbox Ambassador says:you need to contact themThe Xbox Ambassador says:and tell them that the code is used.Terry wrote:I was told to come here? where can I go to get the code?Hi Terryg76,
· What version of the operating system is installed on the computer?
I suggest you to contact the game manufacturer for more help and information.
-
Original title: need help with the blue screen issue
My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.Hello
1. Since when are you facing this problem?
2. you remember to make changes to the system?
3. do you get an error with this error code?I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.
Method 1.
I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
Description of the Windows XP Recovery Console for advanced users
http://support.Microsoft.com/kb/314058
b. perform a disk check.
How to perform disk error checking in Windows XP
http://support.Microsoft.com/kb/315265Method 2.
I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545I hope this helps.
-
Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)
I don't know why vista windows no longer charge, or when the files and folders disappeared
How Windows Defender is on this problem?
Follow these steps to try to solve your problems of boot.
Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:
Download the ISO on the link provided and make a record of repair time it starts.
Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.
At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.
When you have changed that, insert the Bootable disk you did in the drive and reboot.
http://www.bleepingcomputer.com/tutorials/tutorial148.html
Link above shows what the process looks like and a manual, it load the repair options.
NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.
Read all the info on the website on how to create and use:
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
ISO Burner:http://www.snapfiles.com/get/active-isoburner.html
It's a very good Vista startup repair disk.
You can do a system restart tool, system, etc it restore.
It is NOT a disc of resettlement.
And the 32-bit is what normally comes on a computer, unless 64-bit.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Data recovery:
1. slave of your hard drive in another computer and read/save your data out there.
2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.
3 Alternatively, use Knoppix Live CD to recover data:
http://www.Knopper.NET/Knoppix/index-en.html
Download/save the file Knoppix Live CD ISO above.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://isorecorder.alexfeinman.com/isorecorder.htm
Download the Vista software from the link above.
After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.
Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.
Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1st in the boot order.
Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.
When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.
Click on the icons of hard drive to open and to understand which drive is which.
Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).
Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.
See you soon.
Mick Murphy - Microsoft partner
-
Need help with slui message with the Validation Code: 50
OT: need help with the message 'victim' slui...
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 50
Code of Validation caching online: 0xc004c4a2
Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
Windows product ID: 00371-702-8613485-06367
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.150928 - 1507
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{60986DD4-5ADA-464C-A590-469385BD5D3A} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-X7D3P 5 S-1-5-21-4040712825-3780279311-4191590923 the system manufacturer ,System Product Name American Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE 0409 0409 Central Standard Time(GMT-06:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
Installation ID: 022214046070387640229264400212325972472065330163335456
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: X7D3P
License status: Notification
Reason for the notification: 0xC004F200 (non-genuine).
Remaining Windows rearm count: 4
Trust time: 12/01/2016 11:28:57Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: 0xC004C4A2
Beyond: 0 x 0000000000000000
Event timestamp: 1:11:2016 12:55
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==Activation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
APIC1425 APIC 060111
FACP 060111 FACP1425
HPET 060111 OEMHPET
MCFG 060111 OEMMCFG
LASRYVITRAGE OEMB1425 060111
ASPT 060111 PerfTune
OEMOSFR OSFR 060111
SSDT DpgPmm CpuPmHello
Thanks to everyone who responded to my question.
Turns out it would not activate the system properties page.
He did, however, turn on the tool online browser without a
hitch. Yes, problem solved.
Jon
-
Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64
Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.
I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop
Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...
good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...
If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.
Drivers:
Chipset Intel, (install and reboot before other drivers) here
Intel Matrix Storage Manager here
MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here
MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here
NVIDIA GeForce 9600GT here
Intel Wireless 5100 here
Bluetooth here
Realtek RTL8168C Family PCI - E Fast Ethernet NIC here
Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.
IDT High-Definition Audio CODEC Pilot,
1 sp41693, pilot, work reported in XP here view
2 SP39671, driver, jobs reported in XP here or here view
3 sp41698, vista, work reported in here XP driver
High-Definition Audio (HDA) Modem Installer and driver here
.NET framework (required before HP Quick Lunch Buttons) here
HP Quick Launch buttons here
Synaptic Touchpad here S
ENE CIR (infrared receiver) here (your Vista driver)
JMB38X card reader Host Controller Driver here
HP 3D DriveGuard 1.10 has here
If you had for 7 unknown devices (buttons drivers), here
Do a manual installation
Go to Device Manager, right click on the unknown device,
Choose update driver, not to communicate.
Choose the install from a list or a specific location, not search, have-disk,
Navigate to the location of machine.inf.
Do it for the rest of the unknown devices
-
Need help with configuration on cisco vpn client settings 1941
Hey all,.
I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...
If anyone can help with orders?
I need the installation:
user names, authentication group etc.
Thank you!
Take a peek inside has the below examples of config - everything you need: -.
http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html
HTH >
Andrew.
-
Need help with video scrolling
Hello
I need help with a project. Subsequently, I want is that a webcam controls the position of the mouse and the mouse position
control of a video. But I would like the part where the mouse position controls the video.
So, if the mouse is on the left on your screen, the video will be on the first image and when you move, you're the mouse for
the right to the video play as a result traffic. and stop when the mouse is completely right.
Effectivly the scrolles from the mouse through the video. It must be on the x-axis.
I'm not that formilliar with flash, so any help would be great
THX!
Thijs
what you need to do, is to designate a rectangle where users can use their mouse to scroll through the video. If this rectangle has instance name bar, you can use:
var m, b:Number;
var lastSeek:int = getTimer();
flv_pb.addEventListener (MetadataEvent.METADATA_RECEIVED, f);
bar.addEventListener (MouseEvent.MOUSE_MOVE, moveF);
function f(e:MetadataEvent):void {}
paramF (0,0,stage.stageWidth,e.info.duration);
}
function moveF(e:MouseEvent):void {}
{if (getTimer () - lastSeek > 1000)}
flv_pb. Seek(m*e.stageX+b);
lastSeek = getTimer();
flv_pb. Play();
}
}
function paramF(x1:Number,y1:Number,x2:Number,y2:Number):void {}
m = (y2 - y1) / (x 1 - x 2);
b = y1 - m * x 1;
}
-
Making the ear of corn and need help with the ball.
I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:
I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.
Tank,
You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).
Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.
I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...
You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."
Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:
If the above consists of:
Three roads closed, 8 points each, with ordinary linear degrees
Three mixtures of open path with three anchor points for each key path
Six paths closed for shadows / highlights, with 19 points in total
Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.
Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.
JET
-
I need help with the control of two .swf in third.
Hi, thanks for reading!
I need help with the control of two .swf in third.
I have a problem when I need to use a .swf in a digital signage solution, but were advised by the Legal Department, it cannot be changed in any way, I can not also have the source file blah blah blah. I pulled the .swfs on their site and I decompiled to see what I was up against.
The main SWF that I need control is HCIC.swf and the problem is that it starts with a preloader, which, after the loading stops on a framework that requires user input to (button) on a play button, until the film will proceed and replay.
What I've done so far is to create a SWF container, HCIC_container.swf, which will serve as a target for the HCIC.swf and I would like to send actionscript in the file, I am not allowed to edit.
I managed to get done with help from someone on another forum. It is my hope that the following script just start HCIC.swf a framework after the preloader and button play and just play through.
var container: MovieClip = createEmptyMovieClip ("container", getNextHighestDepth());
var mcLoader:MovieClipLoader = new MovieClipLoader();
mcLoader.addListener (this);
mcLoader.loadClip ("MCIC.swf", container);
function onLoadInit(mc:MovieClip) {}
mc.gotoAndPlay (14);
}
But unfortunately it does not solve my problem. Because there is a media - controller.swf, which is charged by HCIC.swf who has orders, including the play button to start HCIC.swf.
Here is a link to a .zip with all 3 files .swf file and all 3 .fla files.
http://www.axiscc.com/temp/HCIC.zip
What I have to do is to automatically start the HCIC.swf file, bypassing the pre-loader and play button without having to edit it or in the media - controller.swf in any case. Thus, all scripts must be done in HCIC_container.swf.
I know it is confusing and it is difficult to explain, but if you look at the files it must make sense.
ActionScripting is far from my point hard, so I'm definitely over my head here.
Thanks for your help.Got my solution on another forum.
Maybe you are looking for
-
Browser gets temporarily unstable after using it for a period of time, until reset
I just installed Windows 8.1 to my computer, and I am currently using the latest version of Firefox. I noticed that after I used the browser for a while, when I'm watching a video stream, or scrolling / clicking through the pages, the browser hangs t
-
My Pandora app does not work on my new Apple TV
I like the new Apple TV, and really I'm a junky Apple... I was happy to see Pandora on Apple TV, but can not make it work. It displays beautifully but not music. Can someone help me? I have read conflicting bits on this matter - mainly on the airtime
-
WANT 7640: Fax multiple Pages
Sorry, but I'm having a real problem, understand the user's guide. On this printer, how a Fax multiple pages on the same number, in the same session?
-
Cannot remove an application because it's administered protected.
Cannot remove an application because it's administered protected. I'm the only user on my PC and I tried to uninstall it and using programs of cleaner files but to no avail. I'm afraid that it changes my files and folders because it has permissions t
-
Simple mouse click randomly acts as a double click
For some time now, on my system, whenever I click (left or right) with my mouse, it works as I double-clicked. It is a random behavior and is not always the case. Sometimes I can go a few minutes without getting that kind of behavior, but it seems th