Similar Questions

• Need help with error code 0 x 80070424 and 0x6D9

  I need help please!  Spent an entire day trying to figure this even ONCE!  When I try to change my windows firewall settings I get error code 0 x 80070424.  I worked at it so long, I forgot when I get the error 0x6D9 code.  But here is my BIGGEST problem, my computer won't let me do DOWNLOADS at all.  I even checked to make sure that the downloads are enabled in my internet settings.

  Any help would be GREATLY appreciated!

  Hi LindaL5299,

  I, too, got the dreaded error codes and spent much too much time looking for and try to apply the patches on the right!  I hope that I am sharing will help you!

  Have you seen this particular thread? (if you have, my apologies.)

  MS Answers: "I keep on getting error 0x6d9 and 0 x 80070424 code."

  If this isn't the case, you can check it out.

  Watch more precisely for the reply by VIJAY B.

  As a Microsoft Engineer, Vijay must know a few things about these formidable error codes!

  I have summarized his answer for you here.

  METHOD 1:

  If you have installed, UNINSTALL McAfee Firewall;

  AND

  T urn WINDOWS firewall "'WE ' "

  To ensure that Firewall service Windows is activated:

  1.   Click on:                         Start
  2 (in the search box) type: service

  3.   Select:                             services
  4 right-click right on: Windows Firewall service

  5.   Click:                              Stop

  6 right-click AGAIN on: Windows Firewall service

  7.   Click:                              START

  METHOD 2:

  Online virus scanner by using the Microsoft Safety Scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  METHOD 3:

  Try to install the latest updates from Windows Updates
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  
  

  METHOD 4:

  Run it Microsoft FixIt! tool (in the following article to see if that helps)

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/

  *************************************************************************************************************

  Keep this site in your 'Favorites', too!

  WINDOWS SEVEN FORUMS    An informative, resourceful AND Microsoft-recommended WIN7 users including Q & A community can save you hours on a Google search! I BOOKMARKED the site (and you could want, too!)

  *************************************************************************************************************

  Hope ONE of these methods is right for you, Linda!  I DO "feel your pain!

  As a company of independent workers, online "etailer", my time AND my livelihood depends totally my PC!  I spent many an hour (s) search on the error codes and try to find fixes.  So, I hope that what I have learned and have just shared can lend to fix your problem (s), also!

  FINGERS CROSSED!

  WendeeMcCee

  "The he Miss Fix - It [If I can!] ". "

  Empathetic to the woes to find fixes for those darn "error codes".

  I hope I can help IF I can, but

  I not an 'IT' pro!

• Re: Need help with the installation of Windows XP Home on my Equium A120-17I

  I really need help here, I need to know with certainty whether someone has already managed to install Windows XP on their laptop Equium A120-17i?

  For now my all new laptop is useless with a new copy of XP is not working due to driver problems.

  I need drivers for all but impossible to find the right everywhere-

  Pilots to operate wireless
  Drivers for sound.
  Drivers for graphics (Radeon X 1200)
  and there are 3 points to mark more yellow in the Device Manager I have no idea what they are!

  I know this has been asked before but someone at - he managed to install again and can point me in the right direction?

  Thank you, Dan!

  Can you please check laptop model name again. Please send the number of model also. Something is wrong with the name displayed for laptop.

• Need help with the transfer of windows XP partition.

  I have a new laptop (running xp prof 32-bit). My U/S laptop (abandoned on a trip) has a larger size hard drive but windows is corrupted and messy. Can I format the biggest hard drive (after retrieving all the data on my desktop pc I did) and then clone/transfer the windows of the most recent laptop hd partition so I can then share on hard drives for the new laptop so I have more memory? I need HELP! Thank you very much.

  I have a new laptop (running xp prof 32-bit). My U/S laptop (abandoned on a trip) has a larger size hard drive but windows is corrupted and messy. Can I format the biggest hard drive (after retrieving all the data on my desktop pc I did) and then clone/transfer the windows of the most recent laptop hd partition so I can then share on hard drives for the new laptop so I have more memory? I need HELP! Thank you very much.

  It is unlikely that it will work; because the material is different, there are differences in what is needed in the installations of Windows... At the very least, you will need to do a repair installation after the fact. The repair facility is not enough and you need to clean install Windows.

• MAC OS 10.6.8 using Safari 5.1 need help with Adobe Flash update

  Hello-

  Recently, Adobe Flash installed an icon in my system preferences and when I click the icon it has several tabs.  It allows updates automatically check.  It is said it will install the latest version of Flash without having to remove the previous version, but I've never said that a newer version is available, unless I have click "check now".  Although "Check updates automatically" is checked, I don't know where he tells me a newer version is available.  In addition, there was 5 "new versions" available since this icon has been installed in the system Prefeences, I only found on newer versions when I clicked on "check now".  If I read that with this new way to install the Mac final version of Flash requires not me to uninstall the previous version of Flash how we installed the latest version of Flash?  Is it in an email?

  Because it tells me that there is a newer version of Flash unless I click on "Check now" must still do the way I used to install the latest version of flash?  (The path in front of this icon was added to the system preferences)?

  I would appreciate help with update Flash to the latest version.  I used to uninstall the old version, restart the browser and download the latest version and install it.  He always worked find, but that was before there was an Adobe icon in my system preferences.

  Here are the instructions to uninstall and install the Flash drive on Mac:

  Uninstall Flash Player | Mac OS

  Setup instructions for Mac OS

  This link will give you updates for the two betas and release version updates.  In fact, whenever we update the player you should be notified.

  Thank you

  Chris

• need help with error # 800704db (10 istall windows problem)

  can anyone help?

  Start by resetting your Windows Update components:

  How to reset the Windows Update components

  http://support.Microsoft.com/kb/971058

  Suggest you download and save the Fixit. Then configure the system before the clean boot by running:

  How to troubleshoot a problem by performing a clean boot in Windows Vista/Windows 7

  http://support.Microsoft.com/kb/929135

  Once the Fixit has been downloaded and the system is started in the pure State, check that the native Windows Firewall is now on if a 3rd party firewall has been used previously. Now run the Fixit and choose the default mode. Restart once it's done and see if the system can be connected to the update servers. If he can't, then rerun the Fixit and choose aggressive mode. Turn it back on when he finished the race and updates.

  I suggest before you stop and install the updates, disconnect from the Internet, first.

  Alternatively, you can perform the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• I need help with the following updates. I get an error code "646".

  Update of security for Microsoft Office 2007 (KB951550)

  Update of security for Microsoft Office Excel 2007 (KB978382)

  Update of security for Microsoft Office System 2007 (KB951944)

  Update of security for Microsoft Office System 2007 (KB978380)

  The 2007 Microsoft Office Suite Service Pack 2 (SP2)

  Update for the junk e-mail in Outlook 2007 (KB979895) filter

  Update for Microsoft Office System 2007 (KB967642)

  Manually download each update here:

  IE: http://www.microsoft.com/downloads/en/results.aspx?freetext=KB951550&displaylang=en&stype=s_basic

  and install the same.

  TaurArian [MVP] 2005-2010 - Update Services

• Need help with the installation of Windows XP Home on my Satellite Pro A300-1DZ

  Hi all.

  I have a Satellite Pro A300-1DZ system unit, model no PSAG1E-OOFOO4EN (think they are 'o' and not '0', circle with slash through it) with WXP Pro.

  I recently contracted a virus inside and as he removed, however it is not good so I want to re - install Windows XP Home edition. I backed up the computer, I have a Windows XP Home SP2 Pro edition disk and I have my product key.
  I put the CD/DVD in BIOS to run 1 drive and tells me that I can boot from the CD, I press a button and it loads the CD, select the option where to install windows.

  BUT! I can t go further than what windows does not detect the HD said he s not now, or whatever.

  My question is this: Please can someone me step by step instructions on how to reinstall XP and a link to all the drivers I need to make it work?

  PLEEASE!

  It's simple on my PC, also, please keep in mind, I am best suited for working on cars, I'm not stupid, but my calloused hands search for computers a little more difficult than Motors please not in many computer technical terms.
  I myself am the slow education in the dark arts of computers. LOL :)

  PS. the laptop has a Vista Basic sticker on it, but it is certainly the XP pro operating system. :)

  Hi jeff

  Here's your solution:
  1. go to bios with F2 when you see the toshiba start screen.
  2. Select the arrow to the left using the "Advanced".
  3 press down until you get to "SATA Controller Mode".
  4 change, using F7/F8, Chang [AHCI] setting [compatibility].
  5. make sure the CD/DVD drive is the first to start and F10 save and exit. computer restart when you are prompted to "press any key" press a button and hey presto as before windows will start the installation, but this time you won't get windows you said:

  Set up did not find Ant hard disks installed on your computer.

  Make sure any drive HARD are powered on and properly connected to your computer and any hard disk related hardware configuration is correct. This may involve running a manufacturer-supplied diagnostic or Setup program.

  implementation cannot continue press f3 to goto hell... uh I mean leaving the installation

  And you can continue on your installation of Windows XP Home edition.

  Hope I helped many other jeff's in the same boat. XD

• Need help with error code "WindowsUpdate_00000646".

  can anyone help?

  http://www.Microsoft.com/downloads/en/default.aspx

  Put the KB numbers in the search at the above link > download them manually.

  If this does not solve it:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with Error #1009

  Hello, I am working on a Flash game where you navigate in different rooms. Each room is located in a frame on the main timeline. I get an error message #1009 when I navigate to certain parts, but each image almost the same code, so I don't know why some executives encounter this problem while others are very well. When the error message that I am always directed to the 'room' I clicked on, but all the buttons in this room disappear and you are then stuck there and having to restart the project. I looked through other forums where people had this error message similar but I could not find a solution that could help me, so I apologize for the display of such a common problem! Here is a screenshot of the error message I get, which says:

  TypeError: Error #1009: cannot access a property or method of a null object reference.

  at project1_fla::MainTimeline/frame4() [project1_fla. MainTimeline::frame4:43]

  at flash.display::MovieClip/gotoAndStop()

  at project1_fla::MainTimeline/enterElevator3() [project1_fla. MainTimeline::frame12:25]

  

  Here are links to the screenshots of the debugging session where it points to the lines of code that contains the error and also screenshots of my code in these pictures:

  Frame error 4 part 1

  Frame error 4 part 2

  Frame error 12 part 1

  Frame error 12 part 2

  Code for chassis 4 part 1

  Code for chassis 4 part 2

  Code 4 room 3

  Code for chassis 4 part 4

  Code for frame 12 part 1

  Code for frame 12 part 2

  Frame 4 is labeled as 'elevator' and armature 12 is "medEntrance". I know that the problem is to jump from an image to the image, but I honestly have no idea what would be the error. I double checked all my code and it must be correct, and what makes it even more confusing, is that some rooms work perfectly while others have this problem and they all use the exact code, but with different names of MC! :/ Something I noticed is that the rooms which are most often linked to (for example that the lift can bind to three different "floors" or frames) are those who encounter this problem. But I chose this pair in particular because it contains the least amount of code I do not understand why have several frames, a link to a picture in particular would be a problem, but it's my first time using Flash and AS3 so I don't know any with its limits.

  Sorry for the overload of code and messy information! I thought it's better to provide too much information than too little and thanks for your help, it is much appreciated!

  rather than distributing your rooms in different key frames,

  Move them to separate the layers

  and use only the first image of each layer

  then do what amy suggested and is wirtie a document class that will have all your key code in

  or put all your code on the first frame of the first layer (separate layers where you have your rooms on)

  So, it becomes available for all your parts.

  To hide rooms you don't currently need put all the parts inside a table:

  var rooms: Array = [room1 room2... room100];

  then write a function

  function showRoom(_index:int):void {}

  for (var i: int = 0; i<>

  {if(i==_index)}

  rooms [i] .visible = true;

  }

  else {}

  rooms [i] .visible = false;

  }

  }

  }

  for example, when you move to the next room call sth. as

  showRoom (4);

  This will hide all parts in addition to the 5th

• Need help with error 404

  Hello

  I just finished properly the local folder, tesing server and remote server configuration (I think).

  My test configuration and the files listed below:

  

  My local folder for the site indicated below:

  

  My Advanced below settings:

  

  I downloaded all the files in the local folder to my remote server running properly on the website online http://www.caremoreconstruction.co.UK .

  No layout of the files/folders etc. have been changed, I have just moved from the FTP server in local folder I had created.

  Just to confirm that I have installed XAMPP and Apache runnining.

  When I open DW CS5 and choose the form of index.php file tab FILES of the main home page opens and I little bar appears at the top and says "this server directives proccesing design mode page cannot display. Switch to Live View'.

  If I click on Live View and load the home page. I can press ctrl and click one of the links. (See image below)

  

  For some reason, I get the following error message when I click on my links.

  _________________________________________________________________________________________ _____________________________

  Object not found!

  The requested URL was not found on this server. The link on the referring page seems to be wrong or outdated. Please inform the author of this page on the error.

  If you think that it is a server error, please contact thewebmaster.

  404 error

  localhost
  12/30/10 11:58:51
  Apache/2.2.14 (Win32) DAV/2 mod_ssl/2.2.14 OpenSSL/0.9.8l mod_autoindex_color PHP/5.3.1 mod_apreq2-20090110/2.7.1 mod_perl/2.0.4 Perl/v5.10.1

  
  

  __________________________________________________________________________________________ _________

  
  

  Please can someone help me!

  Concerning

  James

  
  

  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

  Mr Construction wrote:

  I'm having a problem with the URL when tring to access XAMPP

  http://localhost/xampp (I get a 404 error)

  http://localhost/ (I get error 403)

  It seems that you have screwed up to the XAMPP installation when you moved it.

  As you all barely in place, the simplest way of handling is to reinstall. I assume that you have all the data stored in MySQL. If you have and I don't want to lose it, you will first need to export it.

  1. Stop Apache and MySQL.
  2. Save httpd-conf and httpd - vhosts.conf on your desktop.
  3. Delete C:\xampp and everything inside it.
  4. Install a new version of XAMPP.
  5. Make sure that it works.
  6. Replace the httpd-conf and httpd - vhosts.conf with versions that you saved on your desktop.
  7. Restart Apache.
  8. Enjoy.

• HP TouchSmart 420 - 1000 t CTO: need help with the installation of windows on a new hard drive for HP TouchSmart 420-1000 t CTO (bought in 2012)

  My hard drive is failng in my computer I get the message that "the failure of hard drive" is imminent for several months now.  I did just recovery disks after I bought my computer and that you have ordered a new hard drive.

  I thought that the part of the setup of windows on a portion of the current hard disk that I need to replace.

  I want to just make sure that if I can restore the windows completely and that all programmes provided with the computer are on the recovery discs I want to do it myself - so I need to know I'm doing it correctly!

  Thank you very much.

  Kimberly

  PS I found this web page below and I want to just make sure that it applies to me:

  http://support.HP.com/us-en/product/HP-TouchSmart-420-1000-desktop-PC-series/5146292/model/5155758/d...

  This link in the post seems to apply to the situation.  If you have already completed the defined recovery disc then it should just be a matter of running the recovery disc after the new hard drive is installed.  The recovery disk set will be "restoring windows completely and all programs included with the computer".  Be aware that all other items that were installed or personal data will not be restored.  When replacing the hard drive, do not buy a disc exceeds the limit of 2 TB, such as published in the SPECS for TouchSmart 420-1000 t CTO.

• Need help with the installation of Windows XP SP3.

  Original title: xp sp3 criteria.

  My XP sp3 OS does not start.  My xp sp2 installation disc is corrupt.  I did a benchmark of different BONE with a base XP CD.   IE 6 now does not work

  Can I download and upgrade directly to XP SP3?

  Yes. It is the only way to get windows update to work. Start by checking your service pack level is by clicking on start---> run and typing winver in the Run dialog box. Click ok. Depending on your level of service pack, you can download and install

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  XP SP2.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  STEPS TO TAKE BEFORE INSTALLING XP SP3.

  http://support.Microsoft.com/kb/950717

  Good luck

• Need help with error 8020002b

  When I try to use Windows update, I get the error 8020002b.

  It is a port issue. Port open Firewall or a router.

• Need help with questions of hotspot [Windows 7]

  So for the last few days, I've been playing with my wireless network I can get what is called Homepass which is just a way to fool a 3DS thinking you use Streetpass to get something. Well last night, I was able to get the thing a bit of work, but then I found a problem that I don't know how to fix.

  Here is a link to the instructions I had to do to implement, if necessary, the question is where is EDIT 7: http://www.reddit.com/r/pokemon/comments/2n8hg9/want_the_eon_ticket_homepass_is_for_you/

  In this EDIT 7, the person says change settings of your virtual adapter for that IPv4: https://gbatemp.net/attachments/capture-png.5745/

  Which I did, but now what happens is when I click on 'Get an IP automatically', then click 'Ok', and then access my wireless network card and click on the tab 'Sharing' and then 'allow the other network users to connect through this computer's Internet connection"and looking back at my virtual adapter IPv4 settings , they return what it looks like in the photo. I tried to uninstall and reinstall the drivers several times but with no luck, it always comes back to that.

  I read on the ' ICS using the ' Wireless Network adapt eCard should all be defined on "Obtain an IP address automatically" to really share. Also until I fiddled with the IPv4 settings, he said always 'Sharing' beside the SSID but now it is not everytime I have activate sharing. Could someone help me with this please? I'm still relatively new to this kind of things so I would appreciate any help I can get.

  Here are some pictures of what I'm doing.

  My network connections: http://i.imgur.com/cvZzfBE.png

  Virtual adapter IPv4 (front): http://i.imgur.com/bQ0lvZw.png

  (Front) network adapter: http://i.imgur.com/2lOIA4W.png

  Adapter network (after): http://i.imgur.com/h4KWkTL.png

  Virtual adapter IPv4 (after): http://i.imgur.com/8NytZeB.png

  Thank you once again.

  EDIT: Do you have a little look around and read a few pages on ICS and they said something about Ethernet cables, which reminded me that I actually had my Ethernet cable when I changed these settings, which could be the cause?

  Hello

   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.
   
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking
   
  Hope this information helps.