Need help with expression Encoder 4 Pro.

Similar Questions

• Need help with memory of Satellite Pro A60

  Hello!
  I bougth an A60 sitting Pro and in the manual it says that normally have "256 or 512 MB on the motherboard and PC2100 256, 512 or 1024 MB modules can be installed in the memory slot expansion" but mine has only 192 MB of RAM, as I saw it on the properties of the system, and whenever I look to upgrade memory in different websites it gives me the opportunity of PC2700 for A60 series.
  Personally, I have no idea of what is a pc2100 and if it has no difference with pc2700 but I don't want to buy the wrong.
  Another question: if I install 256 MB it means I'll have 256 or 256 + 192 (which is what I have now)?
  Thank you!!!

  Hi Catherine,

  Your A60 features a 256 MB RAM module in slot 1. The reason why your properties appear 192 MB is that 64 MB is reserved for your graphics card in the BIOS. This has the effect of reducing your available RAM 192 MB.

  You can indeed adapt extra RAM if you wish, but be sure to get the RAM memory modules that are compatible with your A60.

  Your memory after the upgrade will be slot 192Mo 1 so that no matter what size of RAM module you fit in slot 2.

  HTH

• Need help with the 2011 Macbook Pro, OS x 10.6.8 upgrade

  I have a Macbook Pro, Mac OS x 10.6.8 2011.

  I don't know the first thing about software update, but Safari browser (currently version 5.1.10) displays funny websites, and I can't download some plugins. According to me, because my laptop is so old?

  What should I do to upgrade both my laptop AND my browsers? I am a total newbie to this and isn't someone else for help.

  Thank you :-)

  Back up your data, check your applications for compatibilityand download El Capitan from the Mac App Store. You can also switch to a product such as Firefox.

  
  (140116)

• Need help with Adobe Acrobat Reader Pro XI of loading

  I tried loading program, but just as it finishes loading it says that he was interrupted and said you have to reload.  I tried several times to load and it does the same thing every time.  What should I do to get it on my computer?

  Hi sandraab4398,

  Uninstall the previous installer using this cleanup tool Download Adobe Reader and Acrobat cleaning - Adobe Labs tool , reboot your system and not try to install Reader 11 using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Kind regards
  Nicos

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• No support for pse4, don't need help with aid and all the rest. What is a layer? How can I get help PDF from CD? I don't have any idea how to use it. I have a Macbook pro.

  Need help with using pse4 not taken in charge by adobe. How subjects do not available and I have never used something like that. Aide said there is a download but have not been able to do. What is a rookie to do? Y at - it somewhere that I can go to learn how to use PSE4?

  To find out how your problem:

  http://kb2.Adobe.com/CPS/402/kb402107.html

  To get help from the CD files you double-click in the finder, go to PDF help and drag it to the desktop or elsewhere.

• encoding does not start in expression encoder 4 pro

  Dear Sir / Madam,.

  Please help I would like to release my party birthday child on the Net for friends and family in France, Africa and the United States. I bought my EE4 Pro software last month and it's already registed and activated.

  I use the expression Encoder 4 pro in an attempt to encode live video. My windows platform is Windows xp FEATURES 32-bit. The PC workstation that I use has an Intel processors dual core with 2 GB of memory.  I use a video capture card. I'm trying to code a bandwidth low flow of vc - 1. I can connect successfully to the point of publication. I can cue my video source successfully. My problem occurs when I try to start the encoding, the encoding process does not start, but I don't get the error messages. The 'Start' button highlights a second and then fades.  Has anyone else encountered this problem? Is there anywhere stored log files that may contain error information?  I'd appreciate any help.

  Also how can I update my Expression Encoder 4 pro I bought last month?

  Thank you.

  Dukas

  E-mail address is removed from the privacy *.

  Hi jocedrick,

  In dealing with the problem with Microsoft Expression Encoder 4.0, I recommend you to ask your question in the Microsoft Expression forum for assistance.

  Hope the helps of information.

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• need help to change my macbook pro hdd

  Hello. need help to change my macbook pro 13 "mid 2012 hdd. witch HDD I buy 1 TB 7200 RPM 2.5 witch should I choose sata2? or sata3? If you know any suggestions, it would be really appreciated. And when I add the new hard disk can you restore with lion at el capitan?

  Thanks for the help.

  A 2012 MBP has SATA 3 connectivity.

  If you want to install a new HARD drive, the best approach is to clone the new from the old HARD drive.  It will duplicate the original HARD drive which has likely El Capitan installed.  I suggest to use Carbon Copy Cloner to the process.  It is not free, but worth it because you can use it to create a backup disc drag.

  Here's the Setup instructions for your MBP:

  http://eShop.MacSales.com/installvideos/macbookpro_13_unibody_mid12_hd/

  Ciao.

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• New user needs help with the creation of an animation :)

  Hello

  IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

  I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

  Would appreciate any help!

  There are several ways to do so.

  One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.

• Need help with sizing and save files in batches

  Hi need help with a project.

  I have thousands of vector files that I need size of 350px X 350px, and then place it on a work plan x 600px-600px.

  Then I need to save it to the web as a PNG with a transparent background.

  Could I do a script for? or is there another way to do it in batches?

  I wouldn't have to open them one by one and resize the work plan then the image and save it one by one as that would take forever.

  Any help some suggestions would be greatly appreciated.

  ID do as a series of actions photoshop if the end result is png,

  pro image processor can help you make automatically, if you must resize batch additional... >

  https://sourceforge.NET/projects/PS-scripts/files/image%20Processor%20PRO/v3_2%20betas/

  I think that your work can run in a few steps, but for simplicity, I would like to start / test with a new photoshop action recording

  Open a file, change the size of the image to 350 x 350

  Change the canvas size,

  then save under...

• Need help with query between 2 dates

  Hello

  I did not SEE in a long time and need help with a simple query.

  I have a table of DB access with 3 fields, name, date and number

  What I want is to create a query to retrieve all the names between 2 dates

  When I ask the date field, the results are showing in this formats 2013-07-12 00:00:00

  Here's my query

  < cfquery datasource = 'mydb' name = 'test' >

  SELECT name from myTable

  where edate between ' 2011-01-01 00:00:00 ' AND ' 2013-01-01 00:00:00 '

  < / cfquery >

  < cfoutput query = 'test' >

  #name #.

  < / cfoutput >

  What I get is this error

  ODBC = 22005 (assignment error) error code

  [Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.

  Don't know what I'm doing wrong here.

  Please let me know.

  Thank you

  SELECT ename

  FROM MyTable

  WHERE edate BETWEEN

  AND

  #ename #.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode