Need help with settings.

Similar Questions

• Need help with settings - wifi extension

  So I need help from networking. I have xfinity for my internet with a router/modem from arris tg1682g. However, it is located in a horrible place. So I run Ethernet to a central point and connected to an AirPort Extreme (latest version). Extreme, I ran Ethernet in the basement and connected a first gen express. I also have a second express gen located in the rooms upstairs.

  the extreme and express it is defined to extend the network, however the signal keeps a fall or be slowed down significantly even when you are inches apart. When I got the arris in bridge mode and the extreme to create the network and expresses it to extend everything worked fine. However, we have the security to the House installed xfinity, and they took the arris off mode bridge because they do not allow me to use the extreme for the security system. Since then, I got nothing else problems with my internet connection. It is either significantly reduced performance (up to 18mbps 150mbps).

  I also get error messages that the network is not found on the airport connected Ethernet devices.

  It has been very frustrating because the people Comcast it is horrible. So, any help would be greatly appreciated. Thanks in advance.

  https://discussions.Apple.com/message/29878786#29878786

  https://discussions.apple.com/thread/7195783 - is it possible to use the apple Time Capsule as a range extender?

• BlackBerry Q10 need help with settings for e-mail account on Q10.

  I used to have Bold9900 and possible to set different "Username" and "E-mail".

  Both will be in the form of e-mail, so recipients will see my name of the sender as the enamel on the 'User name' field and cannot see my real mail. (Provided by loxinfo @cscoms.com)

  However, once that the device was introduced to the new Q10. It is more possible to do.

  I have to use the same information on both fields.

  Is there anyway that I can check the parameters of Q10?

  Note: It is always also work the same way as Bold9900 on the iPad.

  Hello and welcome to the community!

  I don't know, from your description, exactly what you're looking for. "Username" and "E-mail"? You may be looking for the ability to enter a 'reply-to' e-mail address which is different from the actual email address of the account you are sending from? If so, this feature is indeed not currently available in BB10. Among other features, this is perhaps one that many hope are added to the BB10 platform with future versions of the operating system. But for now, it is what it is.

  Good luck!

• Need help with the settings of the firewall for Firefox

  My wireless connection is fine, but all of a sudden my mozilla firefox browser cannot connect to Web sites. I can connect using another browser. Looks like I need to change the firewall settings, but I don't know how. How can I distribute my browser to work again? Don't know what happened to start blocking it, but it just happened some time this morning.

  Hi Tara,

  You can check the link and follow the steps and check if this may help;

  Configure the firewall so that Firefox can access the Internet

  http://support.Mozilla.org/en-us/KB/configure-firewalls-so-Firefox-can-access-Internet

  Is has problems, I suggest you to contact the Mozilla Firefox support,.

  http://support.Mozilla.org/en-us/products/Firefox

  If you need help with Windows, please do not hesitate to post. We will be happy to help you.

• Need help with configuration on cisco vpn client settings 1941

  Hey all,.

  I just bought a new router 1941 SRI and need help with the configuration of the parameters of the VPN client. Orders aspect a little different here, as I'm used to the configuration of ASA and PIX for vpn, routers not...

  If anyone can help with orders?

  I need the installation:

  user names, authentication group etc.

  Thank you!

  Take a peek inside has the below examples of config - everything you need: -.

  http://www.Cisco.com/en/us/products/ps5854/prod_configuration_examples_list.html

  HTH >

  Andrew.

• Need help with network home using Airport extreme

  I need help with my home network.  I'm not very aware when it comes to all things network.  Here's how my network is currently set up.

  Cable modem to Airport Extreme for Gigabit Switch.  Cables come out of the switch to all areas of the House.  I have 2 other extreme airport connected in other rooms of the House directly on the wall that dates back to the switch.  I hope I am explaining that properly.

  My problem is that this seems to have caused some of my connections cable does not work.  When everything is configured, it has worked well.  All connections in the House worked.  Then we have disconnected one of the extreme airport and moved to another location in the House to have the best wifi coverage.  Since that time, a lot of the ethernet wall plugs are not working.  For example, when I plug in my Macbook Pro in making ethernet in my kitchen, it says connected but it has an assigned ip address and cannot connect to the internet.

  Any help you can provide would be great.

  I would like to get the return tech to help you to...

  But it is likely that something (or someone) has tampered with the settings.

  The layout is fine... but you can cause problems with the network by creating a loop.

  This can happen because the AE you moved is connected wrongly... somewhere in the network it is connected to the switch again.

  Or AE is set to expand wireless... It's FAKE... It will loop the network on the back main EI wireless.

  Unplug the two AE you have that function as extensions...

  Turning off everything else... then it works again...

  Do it in this order.

  Modem... Wait 2 min

  AE... Wait 2 min

  Switch.

  Now check that the network is working properly... power of customers in various locations and make sure everything is good.

  If so, then manually reset the two AE of factory and redo their installation.

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Is there a default value for the color management in PSE10? Beautiful photos from iPhoto, but blur with elements. I need help with this before as I consider that the upgrade to PSE13 and beyond.

  Printing which forms an angle seems ok, but one that is horizontally seems faded, incomplete.

  I was wondering if I saved a layer somewhere and set it as a default value.

  If you group the layers, you will be left with a single layer, thus spreading your concern.

  Suggest that you do the following:

  1. Make sure you have the latest drivers for your printers
  2. Reset the default preferences.

  Hold the Alt, Ctrl + Shift keys when you click the icon to open the items. When asked if you want to delete the settings file, say Yes.

  Items nearby and let regenerate the file.

• I'm suddenly needing help with my browser Firefox (6.0.2)

  Hello
  I'm suddenly needing help with my browser Firefox (6.0.2)

  (OS: I use Windows XP).

  When I open the browser, I don't see is a totally white screen of white, with all the toolbars at the top.

  I know that my physical connections are very good: I have tested the modem, turned the pc market etc and I can also receive/send emails.

  This problem started today, September 8, 2011 and has never happened before.

  Is it a coincidence that Firefox itself to day before I disconnected yesterday evening? Could this be something to do with this particular new update?

  I also noticed that just before I "opened" Firefox, I now get a small box indicating:

  [JAVASCRIPT APPLICATION]
  Handl exc in Ev: TypeError: this oRoot.enable is not a function

  This never appeared before - I hope that it offers a clue has what is wrong.

  The browser not be stuck in Mode safe, said by the way.

  Of course, I can't find solutions to the problem on the internet, I don't physically see all Web sites!
  (A friend sends this request in my name from their pc)

  Any light you can throw on this problem of confusion would be much appreciated. I'd rather not have to uninstall and reinstall Firefox if possible.

  If the only option is to uninstall Firefox and reinstall from your site, I'm also in trouble (I can not see the internet or download).
  In this case, would you be able to send the .exe file as an attachment to my e-mail address? In the affirmative, please let me know and I'll give you more details.

  Thanks in advance.

  One possible cause is security software (firewall) that blocks or limits Firefox or plugin-container process without informing you, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

  See:

  • https://support.Mozilla.com/kb/server+not+found
  • https://support.Mozilla.com/kb/firewalls

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

• Need help with installation on Photosmart C7280 all-in-one

  I had my printer is installed and has been using the printer for 3 wireless laptops in my house.  Now, I can't even find my backup drive, so I have need help with downloading the software to use my printer and also get to use wireless.   I don't know what happened, but the fax for this printer is listed, but not the printer itself.   Help, please!

  Click here to download the software for your printer:

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3204785 & LC = on & CC = US & DLC = in & lang = to & CC = US

  has chosen the appropriate operating system that corresponds to your computer and download the full software features.

• HP laptop: need help with internet and search for things

  whenever I'm on chrome internet explore google ect and go to tab it is says unknown error or no internet connection or anything and just takes me chrome ect. I need help with this im involved in a byod class and my computer won't let me on what whatever usually it just starts out black and white and the seeds I my search request

  Yes it's a Windows 10 and it arrived already installed I'll take the other info now

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• need help with my window is in thai and I do not understand to all.how to convert to English?

  need help with my window is in thai and I don't quite understand.
  How to convert to English? I tried for days but still it cannot be changed.
  because I can't read thai... Please help me step by step...

  my pc is touchsmart 9100 windows 7 Professional.

  Not a single word is in English if I go to the "region and language" to change.

  Everthing is in thai in the system.

  Hello

  Where have you bought the PC?

  What is the operating system installed?

  Best regards

  ERICO

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389