Need help with table formatting in OBIEE

Similar Questions

• Need help with tables

  Hi, I'm trying to do something in flash, but since I'm a beginner I can't do it alone.

  If the thing is, I'm trying to move the mouse and check how many pixels I "walked" by comparing the positions of each image, my idea did with tables, but I don't really know how to do it. Could someone help me? Or could make a simple .fla where I can learn?

  Thank you!

  I know that you'll probably have more questions, but maybe with a bit of play you will be able to start to discover things yourself.  Here are some basics on the tables...  To create a table, you must declare it...

  var coordinatesArray = new Array();

  and to add values to it, you can use the push() method, which will add what you indicate at the end of the table.

  corrdinatesArray.push (something);

  You should look to the top of the Array class in Flash AS2 support documents to see all the properties and methods that can be used with a table.

  This is where it will get a little more complicated that you were intending probably because you said you wanted to store the coordinates.  There are two contact information related to the position of the mouse, _xmouse and _ymouse.  So if you want to store, it is probably best done as a whole.

  Flash has a special class for the coordinates called the Point class.  You should read about this as well because it includes methods and properties that can be useful for what you say you want to do, for example to determine the distance between two points.

  So, to add a new set of points in the table, you can use...

  coordinatesArray.push (new Point (_xmouse, _ymouse));

  but to make use of the Point class, you must import it into the file.

  Here's a bit of code that you must experiment and try to understand what is happening.  Just open a new file and place this code in the timeline panel.  Then run the file and start clicking anywhere around the stage... try to see what each line is right for you...

  to import flash.geom.Point;

  var coordinatesArray:Array = new Array();

  this.onMouseDown = function() {}
  coordinatesArray.push (new Point (_xmouse, _ymouse));
  for (i = 0; i
  trace ("x:" + coordinatesArray [i] .x + "y:" + coordinatesArray [i] there);
  }
  trace("");
  }

• Need help with table 2D

  Hi all

  I work with a 2D array that stores numerical values. Let me explain my problem with an example.

  Consider a 2D table as shown in the picture (input.png) attached. elements of the 2nd row are already present

  in the 1st row. How can I get a new 2d array in which the rows, which already are one subset of another

  rank, are not present, that is, each line has unique elements only. (output.png)

  Thank you very much for the help.

  Concerning

  Aveo

  
  

• Need help with the formatting and reinstalling windows

  Hi, I have a Compaq Presario C700 p/n GR598EA #ABU I got to work about 3 years ago.

  Recently, it does not load windows, even in safe mode and I can't get back either.

  I used a disc to boot from linux to access and backup of all my important files and now I want to reformat the hard drive, resintall windows and start over (or try something else which will fix it)

  The laptop has been pre-installed with Windows Vista and HP stuff had already installed on it.  I don't have a Windows disc or discs of driver with the laptop.

  How can I format and reinstall windows and drivers, if I don't have records?

  Help, please.

  Thank you.

  Hello:

  You can order a Vista recovery disk set for your laptop if they are still available. See the instructions below:

  http://support.HP.com/US-en/document/c00810334=

  If you live not in the US or the Canada, you can contact HP Support worldwide for the country you live and ask recovery disks command to your laptop

  The link to the assistance of HP WW is below:

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Paul

• Need help with table

  I have a spreadsheet that has about 40 different sheets with each of them being a person that lists information about each of them and if they participated in a given event.

  Is there a way to create a table that spans all of the leaves and can show participation based on the event? A bit like a portal into a database. My struggle is to be able to drag the formula down to automatic change sheets. I don't want to have to individually type an if then formula with offset to connect the number for each field.

  You mention a portal on a database. I think you're on the right track. It is easier to gather information in a table that it is from the dozens of tables. Why not keep your data in a database table and 'extract' information for a person of this table.

  If you could give more details one you are trying to do someone here will be able to give more specific suggestions.

  SG

• Need help with Table of contents

  I ran a problem I can not quite understand.  I suspect there is an easy solution, but it's beyond my limited skills and I'm looking for a little advice.

  I have a newspaper (InDesign book) composed of articles.  The articles of each have a title and author, to that which I hold in the table of contents.  Easy so far.  But, I'll try to include the company of the author as a sort of reference under the name of the author.  This is particularly useful when there are multiple authors and/or several companies, which can be a little awkward if just appearing after names so here's what I'm trying to do:

  John Doe, Joe Blow, c, b, and c Jane Doe

  Consisting of a DOE, b Kangaroo Enterprises, Scorpion c electronic

  (a, b, and c are all superscript.)

  But the problem I have is that in the table of contents I want only to read "Joe, Blow, John Doe and Jane Doe" as authors and omit characters exhibiting as well as the name of the company.  At first, I thought it would be easy to do, just to separate the unwanted parts of the paragraph style.  But it does not work.  When I separate the exponent, then none of this appears in my table of contents.  How can I get around this so that TOC works the way you want?

  I can't wait to read your suggestions.

  No matter when you want something different in the table of contents what's in the body of the document, you have a manual work cut out for you.

  In this case, I think you have two options, either modify the lists to remove ratings after the table of contents is generated (and each time it is updated) or link instead to non-printable tags that have exactly the text that you want to use (apply a unique style to those and join instead of the style assigned to the 'real' text.)

  Print no tags can be anchored to the text as an anchored object, so they move with him, or you can configure a nonprinting layer to keep them.

• Newbie need help with css formatting

  I'm new using a dw (cs3) and css, although I have a background in html and coding. I am creating a page using the page "a column elastic, centered, header and footer" layout and I have a header banner with a horizontal spry menu bar at the bottom of the header. the background color of the buttons on the menu bar is red and there is a border of yellow 5px up and down the Red menu bar, so it seems that there is a red bar with yellow edging above and below, and this bar is between the header and the body section of the page. I put these colors in the "ul. MenuBarHorizontal a' rule.
  
  now, the question I have is that my menu bar does not span the entire column, so there is an empty space to the right of my menubar between (the end of the menu bar) and the right column. I would like the appearance of the red and yellow menu bar to expand completely, but I can not understand how to do this in css.
  
  make:
  
  extend the bar menus completely on the entire width of the page? I can't understand how to do this.
  
  Insert a picture to make it appear as if the red and yellow bar continues that extends to the right? If so, how that image will remain elastic and my page?
  
  or is there a better solution?
  
  I'm very new to css and I do my best to understand how everything fits together. the last website I built was in 1997 and it has been done in Notepad. any help would be huge. I'm in kinshasa in the Democratic Republic of the congo, and truth be told it is not a lot of gurus dw here.
  
  Thanks in advance...

  charliemooreiv wrote:
  > you can see what I have up to the http://www.kfhhh.com/amicus/

  Try to cut the border of your ul elements. MenuBarHorizontal a rule so
  what it looks like so...

  UL. MenuBarHorizontal a
  {
  display: block;
  cursor: pointer;
  background-color: #ce1021;
  Color: #333;
  text-decoration: none;
  do-family: Arial, Helvetica, without serif.
  do-size: 14px;
  make-weight: bold;
  Width: 90%;
  padding-top: 0.5em;
  padding-right: .75em;
  padding-bottom: 0.5em;
  padding-left: .75em;
  }

  ... and then create this rule in which are the cutting edge elements
  site as well as a width, background color, and the left float...

  {#MenuBar1}
  Width: 46em;
  background-color: #ce1021;
  float: left;
  border-top-width: 5px;
  border-bottom-width: 5px;
  border-top-style: solid;
  border-right-style: none;
  border-bottom-style: solid;
  border-left-style: none;
  border-bottom-color: #F7D518;
  border-bottom-color: #F7D518;
  }

  Only tested in FF.

  HTH

  --
  Chin chin
  Sinclair

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Need help with query between 2 dates

  Hello

  I did not SEE in a long time and need help with a simple query.

  I have a table of DB access with 3 fields, name, date and number

  What I want is to create a query to retrieve all the names between 2 dates

  When I ask the date field, the results are showing in this formats 2013-07-12 00:00:00

  Here's my query

  < cfquery datasource = 'mydb' name = 'test' >

  SELECT name from myTable

  where edate between ' 2011-01-01 00:00:00 ' AND ' 2013-01-01 00:00:00 '

  < / cfquery >

  < cfoutput query = 'test' >

  #name #.

  < / cfoutput >

  What I get is this error

  ODBC = 22005 (assignment error) error code

  [Microsoft] [ODBC Microsoft Access driver] Type mismatch of data in the expression of the criteria.

  Don't know what I'm doing wrong here.

  Please let me know.

  Thank you

  SELECT ename

  FROM MyTable

  WHERE edate BETWEEN

  AND

  #ename #.

• I need help with an installation failure to interpret and troubleshoot a Setup log.

  Background: A few years ago, many editors of cinema used Final Cut Pro 6 (also contained in Final Cut Studio 2) for their editing projects.  Shared Apple Final Cut X uses a different format that is not compatible with FCP6.  Sometimes, these editors are called to work on a few historical projects that have been published in FCP6 and need this version to run now.

  Starting with OS X Lion, FCP6 would install not in Lion and thereafter.

  According research by Jeremy Johnston as noted on his blog, he discovered that Apple has inserted a file in the folder CoreServices in the Library folder of the system folder that causes versions the version Final Cut Pro X (and other older Apple programs in the same situation) do not settle.  He suggested changes to this file that would seek to prevent interfering with the installation of FCP6 in Lion, many users of final cut PRO 6 were successful in their efforts to install in Lion and work with it.

  Later in a discussion update on installing FCP6 in Mavericks, HawaiianHippie determined that the simplest way to perform the installation of FCP6 was simply copy this file and remove it from the system folder, install FCP6 and then restore the copied file:

  https://discussions.Apple.com/message/26309669#26309669

  I used this method with success to install FCS2 in Yosemite:

  

  [click on images to enlarge]

  However, in my attempts to install FCS2 in El Capitan, it fails in the last 5% to install the first DVD:

  

  

  First of all, I need advice on how to display an extremely large Setup log in this thread (on MacRumors, it is a method to insert a 'code' in a small box that can be the object of a scrollbar if necessary to read all along).  I am unable to find such a method to post here.

  Then once approved, I need help to determine which component is causing the installation to fail and perhaps this element can be omitted from the installation:

  

  If this element is not required, then maybe FCP6 can be installed successfully without it.  And if that omitted element is necessary, perhaps a manual method to install it can be determined by pacifists.

  It is my goal to help those who need to install and use FCP6 on their new Macs running El Capitan.

  Here is the post on MacRumors with pre-installed Setup log:

  http://forums.MacRumors.com/threads/i-need-help-with-an-installation-failure-to-interpret-and-troubleshoot-an-Installer-log.1954786/#post-22541389

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• Need help with screen Blus of death (BSOD) on my computer toshiba laptop

  Hello all, Ive had a little last week, or problems with my laptop. While playing a game (minecraft), I would randomly have a BSOD error and my laptop will re-start. Initially, I gave it no thought, but when it happened again, I decided to try to do a little research, but I'm not terrible with technology and other then I'm neither the case with my own research.

  If someone could point me in the direction of a few possible ways to get this problem.

  guys do you propose I make to the store and see if they can check it out, what would I need if I did.

  I got a program to read some sort of file "dump" made when occurs a BSOD, I publish what this program here says? the program is BlueScreenView, if yes, what I have post the spectator thing? There are has 2 main screens on it, SDO as Sho different dump files (which is on the top) and on the bottom, it lists the names of different files for each dump file I think that some of them highlighted.

  im not this product with tech so I don't know much but I need to post anything on my laptop or any information of the dumpfile and would have this info help in any way to determine the problem? just tell me what I have to post and ill get the information displayed in a response, thank you.

  -leoknighted

  PS: I don't think that playing minecraft is the cause of the BSOD and crashing, but I only get it when playing minecraft, so I don't know if minecraft is causing accidents and others. I watch videos and this all the time and I never have an accident. I'll try and play a different game and see if this causes my laptop down and the cause is perhaps high usuage to my laptop, as I've said games require a lot of power of a laptop/computer, if they are not the 'best' laptop for games. but yh, if someone thinks they can help me and need some information please tell me so I can get it for you. If you guys think it would be best to get a professional to look just mylaptop say, however im save as a last resort.

  Hello

  I suggest you to refer to this article to check if this help.

   

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

   

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

   

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  Let us know if you need help with this question, we will be happy to offer you our help.

• Need help with SQL/PL/SQL for Dates

  Hi Experts - need help with a SQL query.

  I need to insert some date fields in a table called CALENDAR_PERIOD.

  Current data in CALENDAR_PERIOD table with their data types:

  STARTPERIOD (DATE) YEAR (NUMBER) PERIOD_LABEL (Varchar2 255)

  02/11/2014 2014 2014/02/11 SUN

  03/11/2014 2014 14/03/11 MON

  04/11/2014 2014 11/04/14 MAR

  I have to increment above values up to the year 2025. I don't know how to write SQL and increment of these values.

  Ex: My next value should insert: 05/11/2015 2014 11/05/14 WED like that I need to insert data until 12 31, 2025.

  Can you please help me with PL/SQL block?

  Really appreciate your help!

  DB version:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.3.0 - 64 bit Production

  PL/SQL Release 11.2.0.3.0 - Production

  CORE Production 11.2.0.3.0

  AMT for IBM/AIX RISC System/6000: Version 11.2.0.3.0 - Production

  NLSRTL Version 11.2.0.3.0 - Production

  Thank you
  Sandy

  Hello Sandy,

  Maybe something like

  INSERT INTO calendar_period (startperiod, year, period_label)

  SELECT DATE '' 2014-11-04 + LEVEL

  , TO_NUMBER (TO_CHAR (DATE '' 2014-11-04 + LEVEL, "YYYY"))

  , TO_CHAR (DATE '' 2014-11-04 + LEVEL, "MM/DD/YY DY")

  OF the double

  CONNECT BY LEVEL<= date="" '2025-12-314="" -="" date="">

  ;

  ((mais je ne comprends pas pourquoi nous créons une telle table "année" et "period_label" peuvent être calculé à partir de startperiod))

  Best regards

  Bruno Vroman.

• Need help with a query result

  Oracle Version: 11.2.0.2.0

  I need assistance with the output of the query. Here is the table.

  With Tbl_Nm as

  (

  Select 'ABC1' SYSTEM_ID, REGION 'US', 'CHI' SUB_REGION 4000 BALANCE, to_date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') LAST_UPD_TIME, 'A' FLAG of union double all the

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select * from tbl_nm

  I need the output below.

  PQR2 UK MC 2600 1 OCTOBER 2012 04:45

  ABC1 US NY 3500 October 1, 2012 06:45

  LMN3 UK BT 2500 November 1, 2012 07:45

  The need the disc according to this system_id flagged as "A". But if the last disc of 'd' then it must show that the amount, but the file should be displayed in 'A '.

  I've tried a few and got stuck. Help, please. Not able to get a balance '.

  This question is a bit similar to needing help with a query result

  With Tbl_Nm as

  (

  Select 'ABC1' System_Id, region 'US', 'CHI' Sub_Region, 4000 balance, To_Date('1-JUN-2012 10:45:00 am', 'dd-mon-yyyy hh:mi:ss am') Last_Upd_Time, 'A' flag of double Union All

  Select 'PQR2', 'UK', 'LN', 2000, To_Date('1-JUL-2012 10:46:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select 'ABC1', 'IND","MAMA", 3500, To_Date('1-AUG-2012 11:47:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "LMN3", "US", "NJ", 2500, To_Date('1-SEP-2012 09:49:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select "PQR2", "UK", "MC", 2600, To_Date('1-OCT-2012 04:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), 'A' from dual Union All

  Select 'ABC1', 'US', 'NY', 3200, To_Date('1-OCT-2012 06:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' starting from dual Union All

  Select "LMN3", "UK", "BT", 2400, To_Date('1-NOV-2012 07:45:00 am', 'dd-mon-yyyy hh:mi:ss am'), has ' From Dual

  )

  Select System_Id, region, Sub_Region, Balance, Last_Upd_Time of Tbl_Nm T1

  where t1. Last_Upd_Time = (select max (Last_Upd_Time) in the Tbl_Nm T2 where T1.) SYSTEM_ID = T2. SYSTEM_ID)

  So maybe you'd then

  ORDER BY DECODE(flag,'D',9,1) ASC...

  to get the Ds at the end of the list.

  or

  ORDER BY CASE WHAT flag = has ' (your other filters) AND then 9 or 1 end CSA,...

  HTH