Need help with validity sensors, drivers works... software?

Similar Questions

• Need help with Windows 7 drivers for Radeon HD 7670 m on a preinstalled Windows Pavilion g6-2300sy 8

  Hey, I recently bought a HP Pavilion g6-2300sy with Windows preinstalled 8 and decided to install Windows 7 on it instead, as I'm rates more familiar with it. Now I seem to be running into issues with the Radeon HD 7670 m laptop graphics card, since I can't find a driver that works for her. I tried several generic drivers AMD HD 7000 series, but none of them is not working - Windows continues to give the error code 43.

  How can I fix without going back to Windows 8? Any help would be really appreciated.

  Hello:

  For the g6-2300sy, use the W7 x 64 drivers and software for this model:

  For the graphics, you install only the AMD graphics driver. Do NOT install the Intel driver.  The AMD driver has the graphics for two video cards.

  DO NOT USE ANY BIOS OR FIRMWARE FROM THIS LINK FILES

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&OS=4063&product=5278311&softw... =&

• Need help with installing the drivers on the laptop Satellite Pro

  I reinstalled windows xp with drivers Utiity chip, Lan, sound Driver realtic, ATI Display Driver, I can't put my computer on standby, which driver should I for this.
  Also, I went into the Device Manager and the following drivers are highlighted in yellow with a question mark.
  Ethernet controller (2)
  Mass storage,
  Bus modem device high definition audio.
  Video contoller, Vidio contoller vga compatible.

  What should I do to correct this? I'm a novice so would appreciate the answer explained in its entirety because I don't know computer Lingo

  Hi jeyjey2,

  Before starting the discussion on installing the drivers for your problems, post your model mobile exact. This is important because laptops are equipped with different hardware/drivers.

  Additionally, make sure that XP SP2 is installed at least.

• Need help with installing the drivers for Satellite

  Help, please! One day, I restarted my pc I would normally, and it came with a code error on something in the sense of "we need to reboot your pc" so after days that I did get it back and actually log on windows.

  Now when I go into Device Manager, there are 4 things with yellow exclamation points.

  (1) network controller, which does not allow me to go on the internet.
  (2) PCI device
  (3) PCI Simple Communications Controller
  4-SM Bus controller

  Please tell me how I can fix or install these without going on the internet because I can't!

  Thanks in advance

  I don't know what model of laptop you have, but if you can not download the necessary drivers, I recommend you to reinstall the original recovery image and start using your laptop with 'presets' again.

• Need help with the sRGB setting works correctly.

  After reading a lot of comments from all kinds of sources, I decided for my purposes, it is best to put my Photoshop CS4 in sRGB. The problem I have is that often if I drag and drop an image as a new layer on another image I get a warning asking me if I don't know I "want to convert colors to a destination document with a color profile that does not match the current RGB workspace?"  She continues to tell me that my source is sRGB IEC61966 - 2.1 and that my destination is Adobe RGB (1998) and that the work is sRGB IEC61966 - 2.1.   Given that I put my Photoshop under Edit > settings of colors of sRGB IEC61966 - 2.1 and I have my camera to sRGB color I wonder why the window tells me that my destination is Adobe RGB (1998).  I initially shot in RAW and then open my photos in Camera Raw in Bridge and when I'm done with whatever changes, I want to do I simply 'Open Image' which, of course, it will open in CS4 where colors, is once again, sRGB.  What else do I need to change to get all operating under colour adjustment sRGB?

  Thanks for any help you can give.

  The color camera setting applies only to JPEG files as you shoot.

  If you shoot in RAW, then your image has a color space that is applied until you open it in Photoshop.

  At the bottom of your Camera Raw window is a hot blue link. Click it to open the workflow Options.

  Here, you can change the color space, Bit depth. Size and resolution that your image open in Photoshop.

  These settings in ACR to override settings you have for your default color space in Photoshop

  .

  Post edited by: Bo LeBeau
  changed color in the color space mode,

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Need help with Add/Remove buttons work field

  Someone here on the forums had previously helped me to get a button set up a form that would add an additional text field to a form.  I need now to a separate created button that will remove a text field in the case where too many have been added.  I hope someone can help me with this because my XML knowledge is virtually nil.  It's not like I can upload files to the forum here, so I'll try to paste my code.  I just need to get the "-" button to subtract a line.  Thanks in advance for the help.

  -Chris

  <? XML version = "1.0" encoding = "UTF-8"? >

  <? XFA generator = APIVersion "AdobeLiveCycleDesignerES_V8.2.1.4029.1.523496" = "2.8.9029.0?" >

  " < = xmlns:xdp xdp:xdp ' http://ns.Adobe.com/XDP/ " "timeStamp ="2010-06 - 28 T 16: 04:04Z" uuid = "081329f3-4914-4dde-87ae-75a83da8434e" >

  " < model xmlns =" http://www.XFA.org/schema/XFA-template/2.6/ ">

  <? formServer defaultPDFRenderFormat acrobat8.1static? >

  < name of the subform = "form1" layout = "CT" local = "en_US" >

  < Pagesand >

  < name Pagearea = "Page1" id = "Page1" >

  < contentArea x = 'No 19.05 mm' y = '12.7 mm"w ="190.5 mm"h ="266.7 mm"/ >

  < average stock = "default" short = long "612pt" = "792pt" / >

  <? templateDesigner expand 1? > < / pageArea >

  <? templateDesigner expand 1? > < / Pagesand >

  < subform w = "7.5" in h = "10.5" in name = "Page1" >

  < subform w = y "174,625 mm" = "79,377 mm" name = "Current_Objectives" layout = "CT" >

  < subform w = h "174,625 mm" = "9,522 mm' name = 'Objective' >

  < = minH "txt_currobj" field name = '8,263 mm"w = mm"174,625">

  < ui >

  < textEdit multiLine = "1" >

  < border >

  <? templateDesigner styleId aped3? >

  < STROKE edge = "lowered" / >

  < / border >

  < margin / >

  < / textEdit >

  < /UI >

  < font size = cast '11pt' = "Verdana" / >

  < topInset margin = ' 1 mm ' bottomInset = ' 1 mm ' leftInset = ' 1 mm ' rightInset = ' 1 mm "/ >

  < para vAlign = "middle" / >

  < caption reserve '7,76 mm' = >

  < para vAlign = "middle" / >

  < value >

  < text > 1. < / text >

  < / value >

  < font size = cast '11pt' = "Verdana" / >

  < / legend >

  < activity = 'initialize' name = "event__initialize" >

  < script contentType = "application/x-javascript" > this.caption.value.text.value = (this.parent.index + 1) + "."

  < /script >

  < / event >

  < / field >

  < occur max = "-1" / >

  <? templateDesigner expand 1? > < / subform >

  < field h = "5.08 mm" name = "curr_obj_add_line" w '5.08 mm' = >

  < ui >

  < button nail = 'push' / >

  < /UI >

  < character = "Arial" / >

  < caption >

  < value >

  < text > + < / text >

  < / value >

  < para hAlign = "center" vAlign = "middle" / >

  < character = "Arial" / >

  < / legend >

  < border = 'right' hand >

  < STROKE edge = "raised" / >

  < filling >

  < color value = '212, 208, 200' / >

  < / filling >

  <? templateDesigner styleId apbx2? > < / border >

  < link match = "none" / >

  < help >

  < toolTip > add < / ToolTip >

  < / help >

  < activity = "click on" name = "event__click" >

  < script contentType = "application/x-javascript" >

  _Objective.addInstance (1)

  < /script >

  < / event >

  < / field >

  < field h = "5.08 mm" name = "curr_obj_del_line" w '5.08 mm' = >

  < ui >

  < button nail = 'push' / >

  < /UI >

  < character = "Arial" / >

  < caption >

  < value >

  < text > - < / text >

  < / value >

  < para hAlign = "center" vAlign = "middle" / >

  < character = "Arial" / >

  < / legend >

  < border = 'right' hand >

  < STROKE edge = "raised" / >

  < filling >

  < color value = "212,208,200" / >

  < / filling >

  <? templateDesigner styleId apbx2? > < / border >

  < link match = "none" / >

  < help >

  < toolTip > delete an element < / ToolTip >

  < / help >

  < activity = "click on" name = "event__click" >

  < script contentType = "application/x-javascript" >

  _Objective.deleteInstance (1)

  < /script >

  < / event >

  < / field >

  <? templateDesigner expand 0? > < / subform >

  <? templateDesigner expand 1? > < / subform >

  < desc >

  < name of text = 'version' > 8.2.1.4029.1.523496.503679 < / text >

  < / desc >

  <? templateDesigner expand 1? > < / subform >

  <? templateDesigner DefaultLanguage FormCalc? >

  <? templateDesigner client DefaultRunAt? >

  <? Acrobat JavaScript strictScoping? >

  <? templateDesigner Zoom 100? >

  <? templateDesigner grid see the: 1, wink: 1, units: 0, color: ff8080, origin: (0,0), interval: (125000,125000)? >

  <? templateDesigner 26 FormTargetVersion? >

  <? templateDesigner 1 SaveTaggedPDF? >

  <? templateDesigner 1 SavePDFWithEmbeddedFonts? >

  <? templateDesigner horizontal management: 1, vertical: 1, guidelines: 1, crosshairs:0? > < / template >

  " < config xmlns =" http://www.XFA.org/schema/XCI/2.6/ ">

  < name of agent 'designer' = >

  PDF of < destination > < / destination >

  < pdf >

  <!-[0 n]->

  < fontInfo / >

  < / pdf >

  < / agent >

  < date >

  <!-[0 n]->

  < pdf >

  <!-[0 n]->

  < version > 1.7 < / version >

  < adobeExtensionLevel > 1 < / adobeExtensionLevel >

  < / pdf >

  < common / >

  < script >

  Server < runScripts > < / runScripts >

  < /script >

  < xdp >

  packs of <>* < / packages >

  < / xdp >

  < / date >

  <? originalXFAVersion http://www.XFA.org/schema/XCI/2.8/ ? > < / config >

  " < Romagna xmlns =" http://www.XFA.org/schema/XFA-locale-set/2.6/ ">

  <? originalXFAVersion http://www.XFA.org/schema/XFA-locale-set/2.6/ ?>

  < name of locale = 'en_US' desc 'English (United States)' = >

  < name calendarSymbols = "Gregorian" >

  < monthNames >

  < month > January < / month >

  < month > February < / month >

  < month > March < / month >

  < month > April < / month >

  < month > may < / month >

  < month > June < / month >

  < month > July < / month >

  < month > August < / month >

  < month > September < / month >

  < month > October < / month >

  < month > November < / month >

  < month > December < / month >

  < / monthNames >

  < abbr monthNames = "1" >

  < month > Jan < / month >

  < month > Feb < / month >

  < month > Tue < / month >

  < month > after < / month >

  < month > may < / month >

  < month > Jun < / month >

  < month > Jul < / month >

  < month > August < / month >

  < month > Ms < / month >

  < month > Oct < / month >

  < month > Nov < / month >

  < month > Dec < / month >

  < / monthNames >

  < dayNames >

  < day > Sunday < / day >

  Monday < day > < / day >

  < day > Tuesday < / day >

  < day > Wednesday < / day >

  < day > Thursday < / day >

  < day > Friday < / day >

  < day > Saturday < / day >

  < / dayNames >

  < dayNames abbr = "1" >

  < day > Sun < / day >

  < day > LUN < / day >

  < day > Tue < / day >

  < day > sea < / day >

  < day > set < / day >

  < day > sat < / day >

  < day > Sat < / day >

  < / dayNames >

  < meridiemNames >

  < meridiem > AM < / meridiem >

  < meridiem > AM < / meridiem >

  < / meridiemNames >

  < eraNames >

  < age > BC < / era >

  < age > AD < / era >

  < / eraNames >

  < / calendarSymbols >

  < datePatterns >

  < name datePattern 'full' = > EEEE, MMMM D, YYYY < / datePattern >

  < name datePattern = "long" > D MMMM, YYYY < / datePattern >

  < name datePattern "med" = > MMM D, YYYY < / datePattern >

  < name datePattern "short" = > d/m/YY < / datePattern >

  < / datePatterns >

  < timePatterns >

  < name timePattern 'full' = > SS A Z < / timePattern >

  < name timePattern = "long" > SS A Z < / timePattern >

  < name timePattern "med" = > SS A < / timePattern >

  < name timePattern 'short' = > h: mm A < / timePattern >

  < / timePatterns >

  < dateTimeSymbols > GyMdkHmsSEDFwWahKzZ < / dateTimeSymbols >

  < numberPatterns >

  < name numberPattern 'digital' = > z, zz9.zzz < / numberPattern >

  < name numberPattern = "currency" > $z, zz9.99 | ($z, zz9.99) < / numberPattern >

  < name numberPattern = '%' > z, zz9% < / numberPattern >

  < / numberPatterns >

  < numberSymbols >

  < name numberSymbol 'decimal' = >. < / numberSymbol >

  < numberSymbol = "group" name >, < / numberSymbol >

  < name numberSymbol = '%' > % < / numberSymbol >

  < numberSymbol name = 'less' > - < / numberSymbol >

  < numberSymbol name = "zero" > 0 < / numberSymbol >

  < / numberSymbols >

  < currencySymbols >

  < currencySymbol = 'symbol' name >$ < / currencySymbol >

  < name currencySymbol = "isoname" > $ < / currencySymbol >

  < currencySymbol = "decimal" name >. < / currencySymbol >

  < / currencySymbols >

  <>fonts

  < name of font = 'Myriad Pro' / >

  < name of font = "Minion Pro" / >

  < name of font = "Courier Std" / >

  < name of font = "Adobe Pi Std" / >

  < name of font = "Adobe Hebrew" / >

  < name of font = 'Adobe Arabic' / >

  < name of font = 'Adobe Thai' / >

  < name of font = "Kozuka Gothic Pro - VI M" / >

  < name of font = "Kozuka Mincho Pro - VI R" / >

  < name of font = 'Adobe Ming Std L' / >

  < name of font = "Adobe song Std L" / >

  < name of font = "Adobe Myungjo Std M" / >

  < / font >

  < / locale >

  < / Romagna >

  < xmlns: x x: xmpmeta = "adobe: ns:meta / ' x: xmptk =" Adobe XMP Core 4.2.1 - c041 52.337767, 2008/04/13-15: 41:00 ">" "" "

  " < RDF: RDF = xmlns:rdf ' http://www.w3.org/1999/02/22-rdf-syntax-ns# ">

  " < Xmlns:xmp = RDF" http://ns.Adobe.com/Xap/1.0/ "rdf: about =" "> "

  < xmp:MetadataDate > 2010-06-28 T 16: 04:04Z < / xmp:MetadataDate >

  < xmp:CreatorTool > Adobe LiveCycle Designer ES 8.2 < / xmp:CreatorTool >

  < xmp:ModifyDate > 2010-06-28 T 11: 28:54 - 04:00 < / xmp:ModifyDate >

  < xmp: CreateDate > 2010-06-18T 11: 45:23 - 04:00 < / xmp: CreateDate >

  < / RDF: Description >

  " < Xmlns:pdf = RDF" http://ns.Adobe.com/PDF/1.3/ "rdf: about =" "> "

  < pdf:Producer > Adobe LiveCycle Designer ES 8.2 < / pdf:Producer >

  < / RDF: Description >

  " < Xmlns:xmpMM = RDF" http://ns.Adobe.com/Xap/1.0/mm/ "rdf: about =" "> "

  < xmpMM:DocumentID > uuid:081329f3-4914-4dde-87ae-75a83da8434e < / xmpMM:DocumentID >

  < xmpMM:InstanceID > uuid:4d9ea5d0-fbf1-4be5-8aa5-b9c828a765e9 < / xmpMM:InstanceID >

  < / RDF: Description >

  " < Xmlns = RDF" http://purl.org/DC/elements/1.1/ "rdf: about =" "> "

  < dc:format > application/pdf < / dc:format >

  < / RDF: Description >

  " < Xmlns:desc = RDF" http://ns.Adobe.com/XFA/promoted-desc/ "rdf: about =" "> "

  < desc:version rdf:parseType = "Resource" >

  < rdf: value > 8.2.1.4029.1.523496.503679 < / rdf: value >

  < desc:ref >/template/subform [1] < / desc:ref >

  < / desc:version >

  < / RDF: Description >

  < / RDF: RDF >

  < / x: xmpmeta >

  " < xfdf xmlns =" http://ns.Adobe.com/XFDF/ "XML: Space ="preserve"> "

  < annots / >

  < / xfdf > < / xdp:xdp >

  Hello

  It is difficult to see the XML Source what is happening. There are sites like YouSendIt.com or Acrobat.com where you can download files from file sharing.

  In any case, I see the Add button, then the delete row button would look like:

  _Objective.removeInstance(this.parent.index);
  

  The underscore character is a shortcut for instanceManager. I suspect that the goal is the repetitive element. It is easier to include the button Delete a row in the repeating line, in this way the user can select which line they want to delete.

  There is an example here: https://acrobat.com/#d=tdpzltrl25yU2PkvgaQO9w

  Look in the click event of the button 'X '.

  Good luck

  Niall

• I need help with something I'm working on (complete noob).

  Hello the Flash forum people, I'm here and I love you. (seriously, I am grateful for your dedication in forums like these.)
  

  I'd appreciate comments on this 'project', I want to finish. Since then, I almost never finished anything, that would mean loads for me.

  OK, so where to start...

  The design. The design is quite simple - basically it's ice on the top of the image and the flames at the bottom of the image. The ice cubes are made up of layers of 6-8; The problem is once you merge layers, the ice cube effect is drastically changed and looks really bad. Ice cubes have a layer of "Tag" which is located under the layers of ice and is like, well, a fund specially for the ice. The flames are made up of only 2 or 3 layers; No problem with the merger of these layers. They also have a "plate".

  The image was filed in Photoshop and amounts to a reasonable size 990 kb once "saved for Web and devices."

  I hoped that Flash could do for me. I was hoping I could animate the layers 'Plate' and I have a sort of effect 'Streaming Glow'. After that, I was hoping to add a drop of two of the ice, drip and then hit the flame and creating increased smoke effect. Once this done, I want to use the design as a background for a Web site. I was hoping I could get the parties animated running separately (on top of) the design of JPEG.
  

  My struggles. I'm not entirely sure where to start and I could use a modicum of 1 to 1. Apologies if my description is not sufficiently specific for a good inside look.

  Thank you

  Dan.
  

  
  

  I wouldn't recommend that you try to remove this yourself in a single layer flattened like you talk basically implement something like effects of Pixel Bender that aren't on the beginner to put side. Their animation in flash on a timeline is more your level.

  You can also do a simple google search for plugins (free for commercial purposes) in order to achieve the effect, but it will come down to some codes. The plugin this encoding may be simple or difficult. As they say, anything worth doing is worth doing right that requires experimentation and perspiration.

• Validity sensor drivers install correctly

  Hello

  Im having problems with validity sensor drivers. It seems do not install correctly.

  I have installed HP simple pass and works, I also tried to install the drivers of validity (of the driver HP store) sensor but it appaears never install correctly since then it does not work. When I go into the biometric devices in Control Panel, it says that there is no biometric device installed on the computer.

  In my manager of devices, each show of pilots as it has been installed.

  I have a HP Envy 15-k067nz with Windows Seven (64-bit) is installed. Except pilots sensor validity, all other drivers work without problem.

  Originally it was 8.1 of Windows installed on it with validity sensor drivers working on it.

  I also tried to install the version of 8.1 windows in compatibility mode drivers, which did not work.

  IM off the idea on how to solve this problem, so some advice and assistance are welcome

  Big names in the Jordan

  Relocation of all the operating system Windows 7 and then by installing solved my problem of usb controller usb controller drivers. Now, it works quite ok.

  Validity sensor driver, it still does not work, then I had an abortion and I do not use it, is not very binding.

  Thanks for your help,

  Jordan

• Need help to get cc to work again on my desk, I move something and he couldn't get off work. Thank you

  Need help with getting creative to work cloud

  Launch the Office CC (applications tab) and try to go into preferences and exit - click the settings (gear icon), and then connect again.

• Need help with slui message with the Validation Code: 50

  OT: need help with the message 'victim' slui...

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0xc004c4a2
  Windows product key: *-* - YMK9F - 7Q3XK-X7D3P
  Windows product key hash: 9WDJkbD1PdUJ + GCdK63bG2yus5g =
  Windows product ID: 00371-702-8613485-06367
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {60986DD4-5ADA-464C-A590-469385BD5D3A} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.150928 - 1507
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {60986DD4-5ADA-464C-A590-469385BD5D3A}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X7D3P5S-1-5-21-4040712825-3780279311-4191590923the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-702-8613485-06367 0802 20110601000000.000000 + 000F3A53C07018400FE04090409Central Standard Time(GMT-06:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: c1e88de3-96c4-4563-ad7d-775f65b1e670
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00212-702-861348-00-1033-7601.0000-1142014
  Installation ID: 022214046070387640229264400212325972472065330163335456
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X7D3P
  License status: Notification
  Reason for the notification: 0xC004F200 (non-genuine).
  Remaining Windows rearm count: 4
  Trust time: 12/01/2016 11:28:57

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C4A2
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:11:2016 12:55
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: QAAAAAEAAwABAAEAAQADAAAABwABAAEAln3OI0bUDFRsO24dgCKo58SW2JyUY/1mMckmPrb67HxoDsAKMMl2Vg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1425 APIC 060111
  FACP 060111 FACP1425
  HPET 060111 OEMHPET
  MCFG 060111 OEMMCFG
  LASRYVITRAGE OEMB1425 060111
  ASPT 060111 PerfTune
  OEMOSFR OSFR 060111
  SSDT DpgPmm CpuPm

  Hello

  Thanks to everyone who responded to my question.

  Turns out it would not activate the system properties page.

  He did, however, turn on the tool online browser without a

  hitch. Yes, problem solved.

  Jon

• I have a mess of error. about microsoft Isatap adapter... plug and play id root\ * Isatap\0002 error tv-configmgrerr31 need help with drivers

  need help with this.is there a link for the drivers. The only changes to my system is a new modom.netgear wireless g54.thank you

  Hello

  (1) what is the complete error message you receive?

  (2) when exactly you get this error message?

  (3) how long have you been faced with this problem?

  You can ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to function correctly.

  See the article below

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520

• Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  Need help with windows defender. all my files folders pictures everythiing disappeared and I find myself with this black screen and it is not all good: o)

  I don't know why vista windows no longer charge, or when the files and folders disappeared

  How Windows Defender is on this problem?

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Data recovery:

  1. slave of your hard drive in another computer and read/save your data out there.

  2. put your Hard drive in a USB hard drive case, plug it into another computer and read/save from there.

  3 Alternatively, use Knoppix Live CD to recover data:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1^st in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

  See you soon.

  Mick Murphy - Microsoft partner

• Need help with Windows 7 key.

  I have a laptop that I had to change the HARD drive due to a complete failure.  I had a Windows 7 key I know has been good and have never used, purchased as part of a package of pc 3.   Now the installation tells me that this is not a valid key.  I paid almost $150.00 for this set of 3 installs for Windows 7, about 5 years ago.

  The old HDD is dead, I tried to connect with a USB key and nothing.   The laptop was working fine with WIndows 10, then the portable HARD drive is simply dead.  I need help with a new key, or at least the one I have to work.  The new drive HARD won't have not all partitions or any attached former windows key.  I can't get past the check of Windows screen.

  Need help please.

  You must use the product key located on the COA sticker (at the bottom of the laptop, sometimes inside the battery cover or access. Once you have located the product key, and then follow the instructions below to change the key of the key from the factory to the key on the sticker.

  

  How to change Windows 7 product key

  http://www.windowsvalley.com/how-to-change-product-key-in-Windows-7-and-Windows-Vista/

• Need help with a Hp Papvilion Dv7-1270US, from vista to xp 64

  Well, I noticed that a lot of guys are useful here with installing XP on Vista and yes I'm another unhappy Vista user, I am a graphic designer and let me tell you programs and performance is not very good on my laptop HP that I am ready to go back to XP.

  I have an extra HD a seagate sata 80 GB of my PS3 that I drag never used, so I'll use it to install XP on my laptop

  Its what I need help with drivers, man what a pain. I can install drivers left and right that I know how to do this, but Nlite, manual, unzip its so confusing...

  good so I use Nlite to wake my sata drivers and my installation of Windows XP on my HP I would add something in there like {video card driver} {driver Chipset} etc, what should I put in the wake? and once the wake is done and winxp is installed in what order should I start to install stuff, please guys Im confused and need help if someone can point me in the right direction of the dv7-1270 drivers I would appreciate...

  If I happen to screw up my 80 GB hard drive, not a big deal, blue screen, can not load, etc etc... can I just put my original 320 GB hard drive and back to Vista the way it was. ??? is it possible, which would ease my mind, thank you for your responses and assistance.

  Drivers:

  Chipset Intel, (install and reboot before other drivers) here

  Intel Matrix Storage Manager here

  MS-UAA fo SP2 (required with a reboot before the graphic and Audio driver) here

  MS-UAA fo SP3 (required with a reboot before the graphic and Audio driver) here

  NVIDIA GeForce 9600GT here

   

  Intel Wireless 5100 here

  Bluetooth here

  Realtek RTL8168C Family PCI - E Fast Ethernet NIC here

  Please check first that link written by Joshua Wood and concentrate on problems that may appear when you install the sound card in it.

  IDT High-Definition Audio CODEC Pilot,

  1 sp41693, pilot, work reported in XP here view

  2 SP39671, driver, jobs reported in XP here or here view

  3 sp41698, vista, work reported in here XP driver

  High-Definition Audio (HDA) Modem Installer and driver here

  .NET framework (required before HP Quick Lunch Buttons) here

  HP Quick Launch buttons here

  Synaptic Touchpad here S

  ENE CIR (infrared receiver) here (your Vista driver)

  JMB38X card reader Host Controller Driver here

  HP 3D DriveGuard 1.10 has here

  If you had for 7 unknown devices (buttons drivers), here

  Do a manual installation

  Go to Device Manager, right click on the unknown device,

  Choose update driver, not to communicate.

  Choose the install from a list or a specific location, not search, have-disk,

  Navigate to the location of machine.inf.

  Do it for the rest of the unknown devices