Need info on wireless adapter

Similar Questions

• Satellite A660 - need driver wireless adapter

  I recently did a clean install, and while I have most of the drivers, I can't seem to be able to properly install the wireless network card drivers. Whenever I try to install the WLan Intel driver from the Toshiba page, it installs something or rather adapter Realtek family which is fine if I connect the laptop to an Ethernet cable, but what I need is a wireless adapter.

  I downloaded and tried to install a wide range of drivers for the specific model for x 64 Windows 7 downloads page, but no, there is no wireless card.

  It is a model of PSAW3A-07S00R, running on 64-bit Windows 7.

  Thank you.

  Hi Kwijiboe,

  Here is an interesting article on the identification of unknown devices:
  [How to identify an unknown device (e.g. LAN wireless module)? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  After that, he should t be a problem to find the right driver more. You can download the latest WLAN driver on the official website of Toshiba. :)

• Do I need to buy the adapter for Equium A100-027 wireless?

  Hi, don't want to seem like a fool but, can anyone tell me if I need to buy an adapter for my Equium A100-027 wireless? Not very good with the technical aspects, I'm afraid and do not want to buy anything I don't need! Thank you

  Hi mate, no you do not, its construction, his side had the cd player is close to the two usb ports...

  Post edited by: GhostUK

• Settings need to connect a second desktop computer using a NetGear wireless adapter.

  Original title: wireless settings

  I need the settings to connect a second desktop computer using a NetGear wireless adapter.

  The Belkin router work a lot using my Tablet and streaming movies but I can't understand

  the settings on the second PC.

  Any help will be appreciated.

  Thank you.

  "Settings", you need are the SSID (network name) and the encryption key (password).

  Unless you have configured the router to 'hide' the SSID (generally a bad idea), you will see in the list of available wireless networks.  Then, the only thing you need is the encryption key.

  If you do not write your encryption key, you can find it by logging into your router configuration utility.

  If you have a computer running Windows can now connect to the router, open a command prompt window (start > run > cmd > OK) and type "ipconfig" (without the quotes) and press ENTER.  Take note of the 'Default gateway' address.  It is the IP address of the router.

  The default IP for Belkin routers is 192.168.2.1.

  On a computer that is already connected to the router, open a browser (Internet Explorer or Firefox) and enter the IP address of the router (the gateway by default, you noted above or 192.168.2.1).  If you do not have a computer that is connected to the wireless router, you will need to temporarily connect a computer to the router by an Ethernet cable.

  Connect to the router configuration utility.  If prompted for a password and you don't remember, you need to reset the router to its factory default.  Return ticket for additional instructions.

  Once logged in, click on "Security" under "wireless" in the menu.  At this point, you should see a page that shows your password.  Write it down and exit the router configuration utility without making any changes.

  For more help, post back with the model of your Belkin router and also mention if you have any Windows computer that can connect to the router (and if yes, what version of Windows they use).

• I need to know the Freq of my HP Pavilion wireless adapter is 2.4 or 5 ghz?

  The specifications for the HPE 440f does not say, it lists only the 1 GB under network but mine as also wireless adapter card and says nothing wireless.

  The number of prod is: BM 427AA #ABA.

  It runs at 2.4 or 5 ghz?  OR is it the PC Wireless not cela and decides to only commicates the router and the router?

  Anyone know?

  Hello

  Not too bad at all, a large number of machines still use 2.4 GHz. In my house, all printers (HP, Canon, Epson) use of 2.4 GHz. Any computer that uses b/g/n uses 2.4 GHz and my observations, ILS ALL FUNCTION properly. The card will probably remain for the life of the machine.

  Kind regards.

• WIRELESS ADAPTER WILL NOT WORK UNLESS THE WIRED CONNECTION IS PRESENT

  PROBLEM: RECENTLY SPEND YOUR DESKTOP OF WIN - XP TO WIN 7 32 BIT AND MY HP LAP TOP VISTA 32, WINDOWS 7, 64 BIT.

  WIRELESS LAPTOP ADAPTER, NOT REARRANGE ITSELF TO USE A WIRELESS NETWORK

  CONNECTION. THE ROUTER AND WIRELESS ADAPTER HAVE THE CORRECT INFORMATION CONFIGURATION AND WORK WELL USING THE WIRED NETWORK. WHEN I MOVE THE NIC WIRELESS WI - FI FAILS.

  INFO WIRELESS ROUTER:

  LINKSYS BRAND: WRT300N V1.1
  BASIC WIRELESS SETTINGS: NETWORK RADIO BAND = AUTO, CHANNEL = MIXED MODE = AUTO, SSID = ACTIVE.
  WIRELESS SECURITY = WPA PERSONAL WITH TKIP ENCRYPTION

  WIRELESS ADAPTER, INTEL (R) WIRELESS WIFI LINK 4965AGN

  HP Pavilion DV 9700, WIN 7 64 bit update for Win Vista 32, NVidia Ge Force 8600 m GS graphic card, Win 7 64 bit.

  WHEN I CLICK ON THE ICON TO ACCESS INTERNET AND CLICK ON THE NETWORK TO CONNECT, THE WINDOWS NETWORK DIAGNOSTIC DIALOGUE BOX SHOWS CONNECTED, BUT FAILS TO COMPLETELY MAKE THE CONNECTION. WATCH THEN RESOLVE THE PROBLEMS, WHICH FAILS AND FINALLY TO INVESTIGATE THE PROBLEMS OF ROUTER OR ACCESS POINT...

  OTHER PEOPLE HAVE THIS PROBLEM, WHEN THEY SWITCH TO WIN 7. BUT THERE WAS NO MIRACLE DOCUMENTED THAT I CAN FIND ON THE WEB. IN THE OTHER FORUMS DISCUSS ISSUES RELATED TO THIS PROBLEM CONGREGATE, THEY PROVIDE NO BUGS. I NEED HELP TO SET UP MY WIRELESS NETWORK ADAPTER TO THE RECONFIGURATION OF THE WIRELESS NETWORK.

  Thank you all who responded and have tried to help me. Before posting, I tried most of the mentioned patches, including upgrading my firmware of the router. In addition, I went to Device Manager and scanned for changes and checked the properties under the Advanced tab of the Wifi link adapter. I tried the update driver and deactivation and activation of the device. None of this has worked.

  Finally, I uninstalled and then reinstalled the Wifi card. It worked. I guess the driver software became corrupt and data of the register of the device had probably need re - install, this is what worked. This seems to happen when upgrading Windows operating systems prior to WIN 7 and later people lose their wifi connection. Then this problem develops.

  It worked for me. I hope this works for others with the same problem.

  Once again I thank you all.

• Inspiron n4010 virtual wireless adapter shows 'unplugged', does not connect

  I've scoured the web looking for a solution to this problem, found a similar question posted here, but no solution... en.Community.Dell.com/.../20263886

  My friend brought me his Inspiron n4010 notebook help saying until a few months ago, he used to connect to the wifi with no problems. All of a sudden, it wouldn't show all wireless networks available no matter where she went - its wireless home network, work network and neighborhood of free wifi hotspots - none would connect. Similarly, I have tried with my home wireless network and my network wireless office without result. Connect LAN2 (for Boradcom virtual Wireless Adapter) this always as 'unplugged network Cable.

  **********************************
  INFORMATION SYSTEM
  **********************************
  Reference Dell system detects shows the system as:

  Inspiron 14R (N4010, early 2010)
  Serial number: * Let me know if you need this info)
  Express service code: * Let me know if you need this info)

  Here are the specs of the system via system information:
  Host name: LAURA-PC
  Name of the operating system: Microsoft Windows 7 Home Premium
  OS version: 6.1.7601 Service Pack 1 Build 7601
  OS manufacturer: Microsoft Corporation
  OS configuration: Standalone Workstation
  OS Build type: multiprocessor Free
  Registered owner: *.
  Registered organization: Microsoft
  Product ID: *.
  Original installation date: 09/09/2010, 19:22:06
  Starting system: 02/02/2015, 12:13:39
  System manufacturer: Dell Inc..
  System model: Inspiron N4010
  Type of system: PC x 64
  Processor (s): 1 processor installed.
  [01]: Intel64 family 6 model 37 Stepping 2 GenuineInt
  El ~ 1065 Mhz
  BIOS version: Dell Inc. A02, 21/04/2010
  Windows directory: C:\Windows
  System directory: C:\Windows\system32
  Starting device: \Device\HarddiskVolume2
  Local system: en - us; English (United States)
  Input locale: en - us; English (United States)
  Time zone: (UTC-08:00) Pacific (U.S. & Canada)
  Total physical memory: 3 893 MB
  Available physical memory: 2 376 MB
  Virtual memory: Max size: MB 7 783
  Virtual memory: available: 4 938 MB
  Virtual memory: in use: 2 845 MB
  Office (s) swap file: C:\pagefile.sys
  Domain: workgroup
  Logon server: \\LAURA-PC
  Corrections: 268 fixes installed.
  [01]: KB2849697
  [02]: KB2849696
  [03]: KB2841134
  [04]: KB2670838
  [05]: KB971033
  [06]: KB2305420
  [07]: KB2393802
  [08]: KB2425227
  [09]: KB2475792
  [10]: KB2476490
  [11]: KB2479628
  [12]: KB2479943
  [13]: KB2484033
  [14]: KB2485376
  [15]: KB2487426
  [16]: KB2488113
  [17]: KB2491683
  [18]: KB2492386
  [19]: KB2497640
  [20]: KB2503658
  [21]: KB2503665
  [22]: KB2505438
  [23]: KB2506014
  [24]: KB2506212
  [25]: KB2506223
  [26]: KB2506928
  [27]: KB2507618
  [28]: KB2507938
  [29]: KB2508272
  [30]: KB2508429
  [31]: KB2509553
  [32]: KB2510531
  [33]: KB2511250
  [34]: KB2511455
  [35]: KB2515325
  [36]: KB2522422
  [37]: KB2524375
  [38]: KB2525694
  [39]: KB2529073
  [40]: KB2530548
  [41]: KB2532531
  [42]: KB2533552
  [43]: KB2533623
  [44]: KB2534366
  [45]: KB2536275
  [46]: KB2536276
  [47]: KB2541014
  [48]: KB2544893
  [49]: KB2545698
  [50]: KB2547666
  [51]: KB2552343
  [52]: KB2555917
  [53]: KB2556532
  [54]: KB2559049
  [55]: KB2560656
  [56]: KB2562937
  [57]: KB2563227
  [58]: KB2563894
  [59]: KB2564958
  [60]: KB2567053
  [61]: KB2567680
  [62]: KB2570791
  [63]: KB2570947
  [64]: KB2579686
  [65]: KB2584146
  [66]: KB2585542
  [67]: KB2586448
  [68]: KB2588516
  [69]: KB2603229
  [70]: KB2604115
  [71]: KB2607712
  [72]: KB2616676
  [73]: KB2617657
  [74]: KB2618444
  [75]: KB2618451
  [76]: KB2619339
  [77]: KB2620704
  [78]: KB2620712
  [79]: KB2621440
  [80]: KB2631813
  [81]: KB2633952
  [82]: KB2639308
  [83]: KB2639417
  [84]: KB2640148
  [85]: KB2641653
  [86]: KB2641690
  [87]: KB2644615
  [88]: KB2645640
  [89]: KB2647516
  [90]: KB2647518
  [91]: KB2647753
  [92]: KB2653956
  [93]: KB2654428
  [94]: KB2655992
  [95]: KB2656356
  [96]: KB2656411
  [97]: KB2658846
  [98]: KB2659262
  [99]: KB2660075
  [100]: KB2660465
  [101]: KB2660649
  [102]: KB2661254
  [103]: KB2665364
  [104]: KB2667402
  [105]: KB2676562
  [106]: KB2677070
  [107]: KB2679255
  [108]: KB2685811
  [109]: KB2685813
  [110]: KB2685939
  [111]: KB2688338
  [112]: KB2690533
  [113]: KB2691442
  [114]: KB2695962
  [115]: KB2698365
  [116]: KB2699779
  [117]: KB2705219
  [118]: KB2709162
  [119]: KB2709630
  [120]: KB2709715
  [121]: KB2712808
  [122]: KB2718523
  [123]: KB2718704
  [124]: KB2719857
  [125]: KB2719985
  [126]: KB2724197
  [127]: KB2726535
  [128]: KB2727528
  [129]: KB2729094
  [130]: KB2729452
  [131]: KB2731771
  [132]: KB2731847
  [133]: KB2732059
  [134]: KB2732487
  [135]: KB2732500
  [136]: KB2736233
  [137]: KB2736422
  [138]: KB2739159
  [139]: KB2741355
  [140]: KB2742599
  [141]: KB2743555
  [142]: KB2749655
  [143]: KB2750841
  [144]: KB2753842
  [145]: KB2756822
  [146]: KB2756921
  [147]: KB2757638
  [148]: KB2758857
  [149]: KB2761217
  [150]: KB2761226
  [151]: KB2762895
  [152]: KB2763523
  [153]: KB2769369
  [154]: KB2770660
  [155]: KB2773072
  [156]: KB2778344
  [157]: KB2778930
  [158]: KB2779030
  [159]: KB2779562
  [160]: KB2785220
  [161]: KB2786081
  [162]: KB2786400
  [163]: KB2789645
  [164]: KB2790113
  [165]: KB2790655
  [166]: KB2791765
  [167]: KB2798162
  [168]: KB2799494
  [169]: KB2799926
  [170]: KB2800095
  [171]: KB2803821
  [172]: KB2804579
  [173]: KB2807986
  [174]: KB2808679
  [175]: KB2808735
  [176]: KB2813170
  [177]: KB2813347
  [178]: KB2813430
  [179]: KB2813956
  [180]: KB2820197
  [181]: KB2820331
  [182]: KB2829361
  [183]: KB2830290
  [184]: KB2832414
  [185]: KB2833946
  [186]: KB2834140
  [187]: KB2834886
  [188]: KB2835361
  [189]: KB2835364
  [190]: KB2836502
  [191]: KB2836943
  [192]: KB2839894
  [193]: KB2840149
  [194]: KB2840631
  [195]: KB2843630
  [196]: KB2844286
  [197]: KB2845187
  [198]: KB2845690
  [199]: KB2846960
  [200]: KB2847077
  [201]: KB2847311
  [202]: KB2847927
  [203]: KB2849470
  [204]: KB2850851
  [205]: KB2852386
  [206]: KB2853952
  [207]: KB2859537
  [208]: KB2861191
  [209]: KB2861698
  [210]: KB2861855
  [211]: KB2862152
  [212]: KB2862330
  [213]: KB2862335
  [214]: KB2862966
  [215]: KB2862973
  [216]: KB2863058
  [217]: KB2863240
  [218]: KB2864058
  [219]: KB2864202
  [220]: KB2868038
  [221]: KB2868116
  [222]: KB2868623
  [223]: KB2868626
  [224]: KB2868725
  [225]: KB2872339
  [226]: KB2875783
  [227]: KB2876284
  [228]: KB2876315
  [229]: KB2876331
  [230]: KB2882822
  [231]: KB2883150
  [232]: KB2884256
  [233]: KB2887069
  [234]: KB2888049
  [235]: KB2891804
  [236]: KB2892074
  [237]: KB2893294
  [238]: KB2893519
  [239]: KB2893984
  [240]: KB2898785
  [241]: KB2898857
  [242]: KB2900986
  [243]: KB2901112
  [244]: KB2904266
  [245]: KB2908783
  [246]
  Network adapters: 3 interconnect installed.
  [01]: Atheros AR8152 PCI - E Fast Ethernet Controller
  Name of the connection: connection to the Local network
  DHCP enabled: Yes
  DHCP server: 192.168.1.254
  IP addresses
  [01]: 192.168.1.167
  [02]: b 87:4 d 76 fe80::b535:b8ea:8
  [03]: 2602:304:5692:7719:741's: b075:fb08:ce0
  [04]: b 87:4 d 76 2602:304:5692:7719:b535:b8ea:8
  [02]: device Bluetooth (personal area network)
  Name of the connection: Bluetooth network connection
  Status: Media disconnected
  [03]: Virtual Broadcom wireless adapter
  Connection name: Local 2 network connection
  Status: Media disconnected

  ***************************************************************
  TROUBLESHOOTING STEPS TAKEN UP TO NOW:
  ***************************************************************

  1. check that the wireless is enabled via the F2 key - it's (but turn it off seems to have no effect).

  2. check that the wireless is enabled in the BIOS - I. BIOS version is A02, I have not tried so far. I prefer to do it as a last resort, unless that specific need.

  BIOS: Wireless: enabled
  Wireless (Switch) / (Hotkey): all the
  Internal Bluetooth: enabled
  Internal WLAN: enabled
  Internal WWAN: enabled

  3. the Device Manager shows wireless network devices as missing from all the drivers? N °
  Device Manager showed the following details: virtual map of Broadcom, provider wireless: Broadcom, driver Date: 01-21-2010, driver Version: 5.60.48 - 35, digital signer: MS Windows HW Compatible Publisher

  4 are the network updated wireless drivers? With the help of Dell system detects, automatic detection of the system, he showed a driver update available listed as "Dell Wireless WLAN 1501 half Mini-Card (4313bgn) Driver. When running Setup, it gave an error "no compatible hardware found...". »

  5. I ran ipconfig/all. Here is the read:

  Microsoft Windows [Version 6.1.7601]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\users\administrator>ipconfig/all

  Windows IP configuration

  Host Name . . . . . . . . . . . . : **********
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the network space 2 card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Broadcom virtual wireless adapter
  Physical address.... : 02-50-F2-00-00-01
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  Physical address.... : C4-46-19-EF-96-56
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Atheros AR8152 PCI - E Fast Ethernet Controller
  Physical address.... : B8-AC-6F-70-2F-4B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Local Area Connection * 14:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {C00AD485-0CED-4EF9-B632-033E9AFD14E9}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {CD91392E-769E-4E32-A5C2-2680FF4BBC41}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #4
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {FC8C4544-C5EC-479D-AA95-B545EBDCD8C1}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #6
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  C:\users\administrator >

  6. I checked the Windows Mobility Center. Wireless 'tile' was where it should have, according to other messages I saw who were on this subject. Strangely, when I clicked on the button to launch under Dell - Radio control options, checkboxes Wi - Fi and Mobile Broadband have been unchecked and greyed out.

  7. I have reset the winsock catalog and restarted the computer via the elevated command prompt (Administrator)
  NET winsock reset catalog
  No change in status wireless.

  8. I disabled the Norton firewall and Windows and anti-virus to see if wireless was somehow blocked by them. No change in status wireless.

  9. I checked the Windows power plan settings to confirm that network cards did not have their power reduced. I put the adapter wireless for maximum while on battery and current performance alternative.

  10. I checked the Windows Event Viewer logs > Windows Logs > system:

  I've seen repeated Scriptures error spread among the many dates of "BTHUSB (Blue Tooth adapter failed in an indeterminate way, will not be used.". The driver has been unloaded. "I saw no reference to what about wireless however.

  11. I tried to run Windows Update manually to see what, if any, driver updates it can find (using a network cable connection) and got the error 'cannot be updated because the Windows Update service is not started. I confirmed that he was released. I also manually stopped and restarted the service but continued to get the same error message. I kept the Windows Firewall and Norton Firewall (and antivirus) disabled in case they were interfereing with Windows Update, but no luck.

  12. I ran bad/ad/spyware scans with a portable version of Spybot and also a free version of SuperAntiSpyware, analyze the results showed several adware results, that have been deleted.

  13. I tried to manually configure the IP address, subnet mask and entered default gateway for IPv4 to the wireless adapter, which had been put on "obtain automatically", as it should. I also put the server DNS preferred my ISP (Comcast), then tried Google 8.8.8.8. This should have worked but the connection still showed as "cable disconnected" (why is a mistake to launch a "cable disconnected" wireless connection?)

  14. just for fun, I ran the update from the Intel driver from their site (via wired), who identified the available for graphics and Chipset updates - I've updated both, but it did not help (no surprise).

  15. I started Windows in Safe Mode with network - just as in normal mode, he showed the connection wireless as "cable disconnected".

  I am open to any suggestions at this point. The laptop is out of warranty so prefer to avoid paid support, if in any way possible.

  If you can get a hardware ID by activating / deactivating it on or turned off, it suggests itself wireless card is bad... Diagnostic tests could confirm this:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

  You can look in the service manual to try and reinsert the card or replace it. His work a bit longer than necessary:

  http://FTP.Dell.com/manuals/all-products/esuprt_laptop/esuprt_inspiron_laptop/Inspiron-14r_service%20manual_en-us.PDF

  An easier solution if you are uncomfortable with the material of the Assembly would be to buy a USB wireless adapter.

• Which card wireless adapter for Compaq Presario model # SR5510F?

  I have a HP Compaq Presario model #SR5510F and I want to connect wireless to an AT & T 2-Cable Modem.  I need to know what wireless adapter card works for this model.  Thanks in advance.

  Message edited by morrow on 11/19/2009 05:54

  Which wireless standard using the ATT solution? Any spare wireless card should work fine, just for the game to the network.

  See you soon,.

• Cannot connect Stor.E Wireless Adapter + 1 TB HDD in my laptop

  I recently bought a Stor.e wireless adapter for use with my partner Stor.e 1 TB HDD laptop but I can't seem to connect to my laptop.

  If I plug the HARD drive directly into my laptop everything appears also ok but if I connect via the wireless adapter that shows nothing. the instructions that come with the adapter are very poor, but after following the instructions stating "plug drive HARD adapter using the USB cable then plug taken adapter (AC power), the LED flashes of HARD drive and the lights on the wireless adapter showing 1, 2 green, solid = power, wireless = 3 green, strong." USB = blue.

  The disc shows hard on my Android phone and the android Tablet but won't connect, when you perform a scan for wireless on my laptop devices, the adapter cannot be found.

  I sent twice, the support from Toshiba on July 5 and July 10, but have not received the courtesy of a response although confirmation of receipt of my e-mail, so for them we will get back to you in the DAY a statement.

  ANY help with this problem would be highly appreciated.
  Thanks in advance.

  Hello

  Stor.E WLan adapter extends a USB HDD with the ability to access data stored via a WLan connection.
  This means that you must activate your WLan on your laptop and configure the Stor.E WLan adapter first.

  The 3 LEDS have the following meaning:
  Above 1 LED is on / off and lights up green if the adapter is running
  The LED 2 is WiFi link and turns green where wi - fi access has been established.
  The 3rd (first from the bottom) lights up blue when the HARD drive is mounted. Flashing LED means read/write mode.

  How to connect?
  Connect adapter to Canvio Stor.E WLan adapt to the B USB 2.0 (near the reset button) microphone connector and connect the USB HDD to the type A USB 2.0 connector.

  You will need to activate the laptop s Wlan and press the reset button (hold it long 4 sec). The Wireless settings, you should see the Canvio Stor.E open wireless card that you connect access point.

  Then, in the Web browser using IP address: "http://198.168.65.1" to access the settings page of the Canvio Stor.E wireless adapter.

  In the preview, you can see the current version of the firmware, storage devices, network access point information.

  The list of devices shows detailed information on connected devices.
  Within the network, you can find the devault sotre.e wireless adapter network settings

  Now, you can use an Android application called Toshiba Wireless Adapter to move files on the HARD drive connected to the WiFi adapter from your smartphone.

  You can also map the card wifi as a network drive in Windows system.
  In type of Explorer: \\198.168.65.1. then right-click and choose map network drive.
  In a new window, select the application letter to the new drive (Z) and click the Finish button.

• HP 15-ay045ng: Netzwerkadapter old keinen wireless adapter

  Hallo,

  IHR seit meine letzte Chance. ICH habe den o. g. portable computer mit Win 7. Der Lappy will keinen Netzwerkadapter wireless. ICH hab schon alles versucht. Die Treiber auf der Homepage HP funzen nicht. ICH vielleicht einen Treiber WIN 7 as email. Ich bin ratlos.

  Das ist der erste im Geratemanager unter Akbulak (Hardware ID) String

  PCI\VEN_10EC & DEV_8136 & SUBSYS_81EF103C & REV_07

  Bitte um Hilfe ICH. Danke!

  You are the very welcome.

  You need these drivers wireless and bluetooth for this ID...

  The package contains the Broadcom wireless LAN drivers and utility which are required to enable the LAN adapter wireless Broadcom integrated into laptops supported that run an operating system supported.

  FTP://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72879.exe

  This package contains the Broadcom Bluetooth driver and software for models supported that are running a supported operating system. Broadcom Bluetooth 4.0 driver is required to enable the Broadcom Bluetooth 4.0 devices and is compatible with Broadcom Bluetooth 3.0 and earlier versions.

  FTP://ftp.HP.com/pub/SoftPaq/sp73001-73500/sp73091.exe

• Model wireless adapter for HP Pavilion 15

  Hello

  I need to buy a wireless adapter for my HP Pavilion Notebook of 15 and I would like to know the company, the model and configuration of the same.

  HP has an online store in the United Kingdom where I can purchase this item?

  Details of the laptop:

  Model: HP Pavilion 15

  Processor: AMD 5750 APU A10

  RAM: 8 GB

  Graphics card: AMD Radeon HD 8650 + 8600 M

  HARD DRIVE: 1 TB

  Motherboard: 1983 01.15

  System BIOS: F.33

  OS: Windows 8.1

  Thank you

  Hi @Metal_Head,.

  Shows that you are connected to a network that is not identified with limited capabilities.

  To troubleshoot the wireless, you will need to remove the Ethernet cable.

  If you right click on the Network Center and sharing, disconnect the connection you and connect to your router.

  Thank you.

• Toshiba 32RL933 - what wireless adapter I can use?

  Hello

  I have a macbook pro (latest version) which has intel WiDi and my tv has intel WIDI also remind that I could use the one I have in my house, but as I understand it, it is that I need a wireless adapter.

  I have one here at home, but it didn't work. (d-link dwa-140)
  I was wondering if it was my mistake, or if this adapter in question does not work on my TV.

  I would also like to know if the only one that works is the toshiba adapter or y at - it one adapter other than the toshiba that works.

  Thank you

  flaviotobi, after having read pages 13, 48 and specification of the pages (81), the manual of your model TV, (32RL933), the manual of English to me, at least, indicates that only the Toshiba dual-band wifi adapter is suitable for wireless networks and functions of WiDi.

  In my opinion, the use of the available USB only is a concern, this does not allow the use of the function of time-shift TV, because this feature requires the use of a flash or connected USB HARD disk drive.
  It is my opinion that the time shift function is more convenient than having the WiDi or wireless network card and find the cable system without problem, in my case.

  If I want to display anything from my laptop on the TV, I use HDMI, (via a HDMI auto-box switch), because I have multiple devices share available on my 32RL900A sockets and having only a USB taken is a little embarrassing, but as I have said in other forums, we buy what we can afford...

  donhe7

• HP pavilion 15-p107ne: wireless adapter

  Hello

  I have hp pavilion 15-p107ne and im having a problem with wifi adpter

  I have this model ( 1x11b/g/n Wireless LAN PCI Express Half Mini Card Adapter ) and its bad to find networks and connection.

  1. is the problem of the adapter

  2. can I replace it with ( Intel Dual Band Wireless AC WiFi + Bluetooth M2 )

  Thanks in advance

  Hi @wajd97 ,
  
  Please become a member of the HP's Support Forums. I understand that you have a problem with WiFi and you want to change the Module. I'll be happy to help you.

  The following pages are useful for troubleshooting wireless connectivity problems.
  Troubleshooting your wireless network and Internet access (Windows 7)
  
  In addition, you can watch the the power management of your wireless adapter:
  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.
  
  Forget the network: (Windows 7)
  1. press start.
  2. tap manage wireless networks, click on the application at the top of the start menu.
  3. right click on the network, and then click on remove network.
  4 confirm the warning by clicking OK.
  
  Reset TCP/IP on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.
  
  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.
  
  Reinstall the NIC drivers:
  1. download the drivers from here, but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.
  
  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.
  
  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  By page 24 of Maintenance and Service of Guide, you can install part number 710662-005 Intel Dual Band Wireless-AC 3160 802.11 ac 1 x 1 WiFi + BT combo adapter 4.0.

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Not able to install the wireless adapter built on Tecra 8200

  Hi all

  I have a Tecra 8200

  After you have installed Windows XP Pro, the wireless adapter will be found as PCMCIA MTD-0002.

  I cannot install the drivers for the card of m.

  XP is SP2
  BIOS is 1.60

  Could someone help me what to do, thanks in advance.

  Brgds,

  Thomas

  Hello

  If you have the card WLAN MiniPCI Agere, the system needs to install the following registry key with the WLAN card driver:
  [HKEY_LOCAL_MACHINE es\Pcmcia\Parameters]
  "IrqRouteToPciController" = dword:00000006

  I found a statement of installation:

  1. new installation of Windows XP Service Pack 2 package
  or clean install Windows XP Gold package and install Service Pack 2 update image on it.
  2 copy the TICardBusIrqRouting.reg on the system, and then click the file on the system.
  3. the following window will appear,
  "Are you sure that you want to add the information in xxxxx\DISABL ~ 1.REG in the registry.
  Then select "Yes".
  xxxxx is the location of TICardBusIrqRouting.reg
  4. the next window will appear,
  "Information in xxxxx\DISABL ~ 1.REG have been entered in the register."
  Then click on 'OK '.
  xxxxx is the location of TICardBusIrqRouting.reg
  5 restart the system

  Good luck!
  Good bye

• Slow WiFi on Qualcomm Atheros AR9485 wireless adapter on HP Pavilion 500-120EA 8.1 Windows

  This wireless adapter is extremely slow that causes ping high during the game. The game I tried was League of legends. The artheros adapter showed the ping MS 1000 +.

  So I decided to see if the necessary driver updated. When you go to Device Manager to update, it showed that she needed no updates.  Also checked on the hp site and it showed that I have the latest version of the driver. So I checked the Atheros website and I didn't have the latest version of the driver. So I intalled the latest driver at 10.0.0.263 10.0.0.270.

  Yet once I tried the game to see if there is an improvement with Internet and again he showed my ping 1000 + Ms. has not changed at all. No improvement.

  I did troubleshoot and it sort of something I do not know what but. No change.

  I also changed the powersaver maximum for the wireless card. No change.

  Several times I looked at task manager network, it shows send and receive to be at 16/08/32 Kbps or sometimes even zero Kbps. The table looks very small and its value on the chart was of 100 Kbps.

  However, I don't see a difference during the videos to youtube or browsing the Internet. Here, the speed is very good. Even during the speedtest, speed showed a ping from 43ms. sending / receiving packets are indicated in 00' sKbps Mbps. The table is not stable it flucatuates strongly.

  So I change my card a blekin N300 wireless and all the problems I've had are solved. The ping playing League of legends is 40-70 m send it / receive packets similar to the atheros AR9485 rae but I've seen go up to 88 Kbps at its highest level.

  So what can I do to fix the Qualcomm Atheros AR9485 wireless adapter?

  Any help is appreciated.

  What can I do else?

  Just an update to someone else who has had this problem for the channel 11 wireless channel setting should do the trick.