Phone has stopped hanging and vibrating when I receive new e-mail
My 6s phone hung recently arrested and vibrating when I get my new messages. I have reset all settings and also saved and restored the phone without success. All other apps work like alert messages, only problem with the mail application.
Any help would be greatly appreciated.
If your sounds and notifications are defined correctly and do not disturb is not on then try to reset the mail application.
First close your Mail application completely from the window of the selector app by double clicking the Home button and drag the email preview pane up until it disappears from the display. You may need to search the mail pane covering scribbles to the left. Then go to settings > Mail, Contacts, calendar > find your e-mail provider and click on the account. On the next page, delete the account. Then perform a forced reboot. Hold down the home and Sleep/Wake buttons simultaneously for about 15-20 seconds , until the Apple logo appears. Then go to settings > mail... and to add the account.
Tags: iPhone
Similar Questions
-
BlackBerry Smartphones ring and vibrate when you receive a SMS
My SMS text settings should ring and vibrate, but although it will still vibrate ring is incoherent and random. Should I turn off vibrate to make it sound? Or is there anyway to also sound good and vibrate?
nrmyers wrote:
My SMS text settings should ring and vibrate, but although it will still vibrate ring is incoherent and random. Should I turn off vibrate to make it sound? Or is there anyway to also sound good and vibrate?Try this app in my post http://supportforums.blackberry.com/rim/board/message?board.id=9500&thread.id=15414
-
My phone has stopped ringing, but it will vibrate and display as a call comes in, so what settings should I have on that. I don't remember changing anything?
Have you checked the ring/silent switch on the left side of the phone?
If the switch is slid to the back of the phone and you can see a red line above the switch (the side closest to the screen), it is in silent mode.
-
Original title: NService Application has stopped working and was closed
Recently, I see this popup on the desktop when I start my computer first – 'NService Application has stopped working and has been closed. "
What is - this and why I am see?
Thank you!
Hi Lee,.
1. have you made a recent software or hardware changes to the system?
2. is your system connected to a domain?
Nservice.exe seems to belong to IBM Lotus Notes / / Domino from IBM.
Method 1:
If you use applications such as Lotus, then you can try to uninstall and reinstall to fix the problem.
Note: Make sure that you have the CD or downloaded installation files to reinstall the program.
For more information, see the articles:
Method 2:
Otherwise, you can perform a clean boot and check if that helps.
A clean boot to check if startup item or services to third-party application is causing this issue.
You can read the following article to put the computer in a clean boot:
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.
-
Hi I have windows vista basic and it worked very well until yestaday and I got a message saying windows Explorer has stopped working and when I click on restart 3 seconds later, he appears once again?
original title: Windows Vista Basic worked fine until yesterday and now I get messages saying that Windows Explorer has stopped working.HelloUse the startup clean and other methods to try to determine the cause of and eliminate
the questions.---------------------------------------------------------------
What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
on this machine, including those you have uninstalled (they leave leftovers behind which can cause
strange problems).----------------------------------------------------
Follow these steps:
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================
After the foregoing:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to troubleshoot performance issues in Windows Vista
http://support.Microsoft.com/kb/950685Optimize the performance of Microsoft Windows Vista
http://support.Microsoft.com/kb/959062
To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
reference (if you have a small box at the bottom left - show for all users, then check that).How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlA quick check to see that load method 2 is - using MSCONFIG then put a list of
those here.
--------------------------------------------------------------------Tools that should help you:
Process Explorer - free - find out which files, key of registry and other objects processes have opened.
What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
each process.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoruns - free - see what programs are configured to start automatically when you start your system
and you log in. Autoruns also shows you the full list of registry and file locations where applications can
Configure auto-start settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspxThere are many excellent free tools from Sysinternals
http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx-Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
a program that runs in your Windows startup.
http://www.NirSoft.NET/utils/what_run_in_startup.htmlThere are many excellent free tools to NirSoft
http://www.NirSoft.NET/utils/index.htmlWindow Watcher - free - do you know what is running on your computer? Maybe not. The window
Watcher says it all, reporting of any window created by running programs, if the window
is visible or not.
http://www.KarenWare.com/PowerTools/ptwinwatch.aspMany excellent free tools and an excellent newsletter at Karenware
http://www.KarenWare.com/===========================================
Vista and Windows 7 updated drivers love then here's how update the most important.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================================
Refer to these discussions because many more excellent advice however don't forget to check your antivirus
programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
first.Problems with the overall speed of the system and performance
http://support.Microsoft.com/GP/slow_windows_performance/en-usPerformance and Maintenance Tips
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125Explorer Windows stopped working
http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Original title: NVIDIA Windows Kernel Mode Driver Version 306.97 display driver has stopped working and recovered.
Hiya,
I have recently installed Windows 8 Pro, installed all of my usual applications etc..The problem I've encountered is maintaining display driver crashing. Or have waiting periods. The exact error message reads;"Display driver NVIDIA Windows Kernel Mode Driver Version 306.97 has stopped working and recovered."Until now it expires randomly even when the computer is idle, and more frequently when I watch videos online. Also, watch a clip full screen on some sites like YouTube is ok, but on others, it is very laggy (updated maybe once per second the image) and the sound is out of sync.I can't find a way to properly uninstall the graphics driver.At least yours is working semi... I have the GTS 450 (uses the same drivers) and the mine does not at all... Stuck with the regular game pilot integrated ATM and can not all games... Microsoft told me to wait a few weeks and for the reminder and Nvida said 10 ways to uninstall and reinstall the drivers for same. Hope someone with to get a fix for this soon.
Hi guys,.Looks like this isn't just me.Just an update, that I can not confirm it as a solution, but I have not encountered any problem (a little screenlag aside) since the installation of the drivers beta. For me, the beta version of the driver is 310.33, R130. The only other change to my system updates Adobe Flash version packaged with Google Chrome to 11.4.31X to 11.4.402 to eliminate serious problems when you watch the video in full screen.Information system;Operating system: Windows 8 Build Pro with Media Center 64-bit, 9200CPU: AMD FX-8150 eight physical coresGPU: ASUS NVIDIA GeForce GTX 560 TIMain hard drive: OCZ Vertex 3 120 GBIt may be usefulEdit: Still not falling down, 11/02/12, 4 days
New edition;
If you still receive the error message, try the following steps;Has. try to perform a clean installation of the driver.Download the latest drivers for your graphics card. Run the downloaded file, and select "Custom Installation". In the next screen, you will see a checkbox or similar labeled "Clean Install".
You can do so by visiting nVidia Driver Downloads (www.nvidia.com/Drivers). Automatically detect the right driver or download using the form. The best way in my opinion is to use the GeForce experience, who will do anything for you in two clicks and a reboot.B. close all other programsIt is possible that the error was caused by too many programs that need to use the resources provided by the graphics card/chip. It is also possible that a certain program caused a conflict that pilots crashed.You can try closing some currently open programs one by one and see if the error persists, or restart your system with disabled startup programs and allow them one by one to find the culprit. If the error is too persistent to do the above, it would be easier to start in safe mode option.More information can be found below -
I just updated to 2015 for CC in Photoshop.
The program seems to open, but in a few seconds, I get a message telling me it has stopped working and closes.
Help please!
If you use Windows comp, you can check below links:
-
On my installation of Vista, all windows updates no longer work. If I try and run them from Windows Update in Control Panel one starts to run but then it just hangs. At the same time, I get a message "Windows install Module has stopped working and closes". If you look in the services, it is crushed, but restarts. The update remains always hung. It doesn't matter what update I try and run, I always get the same result.
When the computer is shut down, it also tries to automatically install updates. These also hang on the first, which means that I have to force power off the computer.
Don't know if this is related, but I don't think that SP2 already installed - it kept if crush (don't remember what was the error message). When I restart in safe mode it tells me that I'm still on SP1. I followed all the suggestions on how to get SP2 installed for the error I received, but nothing has worked.
Do not really understand what I have really installed a lot of "_" on the PC, it is a "clean" installation (about 1 year now).
Any ideas? Really, I don't want to have to do a re-install, but I suspect that is where I'm heading unfortunately.
Hi AndrewInNZ,
Thanks for visiting the site of the community of Microsoft Windows!
I would like to ask you some questions for a better understanding of the issue:
(a) did you try to temporarily disable the security software and check if updates are smooth?
(b) you are using a firewall in addition in instead of the windows firewall? If so disable (temporarily) of the third party firewall and look for updates.
It is usually caused by a 3rd party firewall that it blocks the internal ports.
Check out WERCON for more information-
1) Click START | wercon.exe type in the search box start and click on enter.
(2) select "View problem history", under 'Windows identified problems' with the right button on a problem, and then select "view problem details. Click "Copy to Clipboard" export to text document
Also reset the Firewall setting:
1) Click START | type FirewallSettings.exe into the start search box | Click on FirewallSettings.exe above | Select the Advanced Settings tab. Click 'Restore Defaults ' | Click on apply (if Hi-lighted) | Click OKCheck the status of the service as well:
Log in as administrator-
Start button | Control Panel | System and Maintenance | Administration tools
Double-click on Services
(Provide the administrator password or a confirmation if prompted to do so.)
Right click on the 'Windows Modules Installer' service, and then select Properties.
Select the general tab - make sure that the startup type is manual
Here is the link to solve problems connecting to Windows Update or Microsoft Update
: http://support.microsoft.com/kb/818018/en-usIf you want to check the version of the service pack of the operating system:
Right-click on computer and select Properties.Hope this information helped!
Thank you, and in what concerns:
Aziz Nadeem - Microsoft technical support.
Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think. -
AMD driver has stopped responding and successfully recovered
Hi, I bought a new computer hp laptop (dv6-6024TX) and I always get the message "amd driver has stopped responding and successfully recovered" I don't get it when I alt tab of a graphic demanding game (Heroes Of Newerth).
Record: core i7 2630qm
4 GB of ram
graphics ATI mobility radeon hd 6770
700 GB HDDHow can I solve this?
OMG GUYS I THINK I FIXED IT!
If you never play a high graphics demanding the game for example: Heroes of newerth/crysis 2, etc.
change your windows theme to classic windows! It may seem ugly but who cares your cheek a game anyway.
I read this off somewhere and I tested and so far no error! so happy, like my cell phone now: -
Error: Matte final has stopped working and Windows is trying to find a solution
Original title: Aunsoft final Mate software v 1.7.1 will not run on W7 machine
I tried to run Aunsoft final Mate software v 1.7.1 on my W7 machine (Windows 7), but it always stops running until it actually launches. I tried to install my Norton Security full suite uninstalled to ensure that any anti-spyware not wasn't in the way, and it still does not launch (after uninstalling Norton, I uninstalled final Mate and only reinstalled as well). I keep getting the error message Final Mate has stopped working and Windows is trying to find a solution, which is does not work.
Aunsoft crossed all their available technical means, but they could not understand whatever it is no more. They have not said it's works fine on their machines of W7.
I also tried to intall a product different from Aunsoft MTS Converter, just to see if that would go. As with Final Mate, it seems to install fine, but also hang up when start and never actually starts.
Anyone else have problems or suggestions on how to turn ugly Mate on W7 final enforcement?
This is an old post. Still, I thought I would share my understanding of the problem. I've also faced this runtime error. This happened when the video files have been loaded from an external hard drive last sessions. When the session has been closed, these files were still listed in the source. It seems, when I started final Mate, it looks for the files and then shows the runtime error. When I connected this drive, this problem has been resolved. Therefore, the solution seems to be to ensure that the files are deleted from the source list before leaving the program.
Hope this helps someone who knows the same problem now and google up to this discussion.
-
My phone has been hacked, and what should I do to ensure that my account is blocked?
I received a message below on the home screen (before I unlock it) from my iPhone and iPad. It seemed strange to
me because the battery upward at the top right is in color and it's prompting me to e-mail to a gmail account. When I received this message, it triggered an alert «I lost my iPhone/iPad» I tried to access my icloud and he stated that it was inaccessible. I turned off the camera and turned it back. Then I changed the password on my icloud account and have not had a problem so far. My phone has been hacked, and what should I do to ensure that my account is blocked?
< image edited by host to remove personal information >
Your iCloud account is compromised and the criminal who did it trying to extort the money from you.
Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
-
Video has stopped playing and has not saved after alert imessage
During video recording on my iPad, I received an alert from iMessage. The video has stopped playing and did not save what has been already registered.
Is this a normal behavior or y at - it a setting I can change to block all alerts being recorded?
Thanks in advance.
Hi sabfa,
If you do not want to be interrupted when you save the video on your iPad, try to activate do not disturb.
Use of do not disturb on your iPhone, iPad or iPod touch
Turn on or off the do not disturb
When do not disturb is activated, a Crescent Moon , or half-moon, an icon will appear in the status bar. There are two ways to turn on or off the do not disturb:
- Tap Settings > do not disturb. Choose the manual option to activate the do not disturb sign now or set a schedule.
- Swipe up from the bottom of the screen to open the Control Center. Tap on the Crescent Moon.
Change your settings
You can also choose if you want to be disturbed:
- Allow calls to: allow calls from anyone, person, your Favorites or stored on your device or your iCloud account specific contact groups.
- The calls repeated: If someone calls you twice within three minutes, the call will not be silent.
- Silence: select silencing calls and notifications always or only when the device is locked.
Take care
-
I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message
"GPCore COM object has stopped working and was closed".
This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.
Hello MikeF48,
Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.
I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.
Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://get.Adobe.com/flashplayer/
9 download drivers and full software features
Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
10. run the download to reinstall the printerAfter having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.
-
Installer of Modules of Windows has stopped working and was closed
Hello
I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago. When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed." I have already reinstalled Windows Updates and Microsoft Updates, nothing helps. Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
Help?
Thank you!Greetings mollypopsicle,
I see that we have always had problems with this update. This leaves me with the question about the possibility of fi computer update auto is damaged during download.
I would like to have you create a folder on your desktop. Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.
If you have a download manager, please use it to download the KB958623 update from this Web site
http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20
Make sure you use the version of Windows Vista that applies to your system.
Once the download is complete and before running the update
- Restart your system in safe mode with networking, as described in the above post from Brian.
- Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
- If this does not properly complete, were there a pop-up Windows indicating that an error? If so, what were these errors?
- Maybe it's that the error you receive is that this update does not apply to your system. If so, this update can be hidden in your list of updates.
Here is a link on how to hide the update
Select only the I'm getting offered an update from Windows that I don't want.
However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition. Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.
Thank you and continue to keep us informed of the State of this update.
Best regards
Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.
-
Display driver igfx has stopped working and recovered
While playing the sims 3 the screen goes usually black then back to the game. then it goes black again and the game will continue once again, the screen is much darker. the darkness of the screen comes and goes and seems to pass the game of light to dark. Sometimes my computer just hangs. After I quit the game, a message appears saying: "display driver igfx has stopped working and recovered." What should I do to stop these pranks of the screen?
Floop51,
Take a look at this post: what to post in the forum games and then give us the details of your system and the operating system. Given that this error is indicating your graphics card you can uninstall\reinstall the most recent driver. Then clean restart your system and test. Check the specifications of your video against the requirements of the game card. If your card is at the very least, you may need to lower the resolution of the game.
You can also check with the support of The Sims .
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
When I type (OK) the computer continues to the application, I entered, but there may be a rangein the opinion of the 'BAD IMAGE' with various. EXE files. Somehow gotten past as the correct file name cut shortwhat he should ever TRAVEL ~ .dll. I can r
-
IMAX slow after install el capitan
Very slow IMAX after installation el capitan
-
Question of filtering Automator
I was wondering if someone could tell me a way to filter holders number you will find on any page of Wikipedia to allow the page to be read aloud by the computer without all the hooks numbered playing with her. My first thought was to filter paragrap
-
A creator of this popular software, this should be the most logical part. Given that each authorized user registers with it as well as the id MAC, regularly logs in to windows update, if the same is machine is stolen, even where it is formatted, as a
-
If the CD to install XP, I will be able to download SP3, and are there any other issues I should be aware of? Any help appreciated.