Need name of server

Similar Questions

• Help! I NEED A PROXY SERVER ADDRESS...

  RECENTLY, I'VE RESTORED MY LAPTOP. NOW MY INTERNET CONNECTION IS VERY SLOW. I NEED A PROXY SERVER ADDRESS. WHERE CAN I GET OR FIND A?

  It is not a matter of getting a proxy server address, it "s a question to configure a proxy server that is not a simple process and usually doesn't do much to increase the speed of the connection (although it improves it little to visit repeat sites).  During installation, an address is created or provided if you follow this path, but I really don't think it will solve the problem with the connection speed, even if it helps a little.  The proxy server must be installed on your own network.

  Here is some general information about Proxy Server: http://windows.microsoft.com/en-US/windows-vista/What-is-a-proxy-server. Note that it says it uses a computer other than the proxy server and that it is for commercial environments and not usually for home networks.

  I hope this helps.

  Good luck!

  Here is some information on wireless networks and wireless internet connections that can help with your problems of connection speed:

  Here is a tutorial on how to set up a home network (including a wireless)-click on additional links for more information that may be helpful:http://windows.microsoft.com/en-US/windows-vista/Setting-up-a-home-network.

  Here is an article on troubleshooting network connections wireless (with links):http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-network-connection-problems.

  Here's a long guide on wireless internet connections in Vista:http://www.techwarelabs.com/guides/misc_mod/vistaconnection/.

  Here is an article on how to set up wireless internet in Vista:http://www.clpgh.org/usingthelibrary/technology/wireless/WindowsVista.pdf.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• VersaMail - 'Unable to resolve name' mail server error

  I had an intermittent but frequent with VersaMail problem when I try to connect to get my email.  Often, I receive the following message:

  "Cannot resolve the name pop.mindspring.com. Check your DNS settings or enter the IP address of your mail server. »

  I also occasionally get to my Yahoo.com e-mail addresses, is not unique to Mindspring.com.  Sometimes, often, but sometimes I get no problem, so settings I seem to work - when they want to.  Needless to say, it's frustrating and annoying, so if anyone has a way to solve this problem, I would appreciate knowing.

  Thank you.

  Problem solved!  I had google for answers and found an explanation of DNS servers on another forum where someone had a similar problem.  It seems that DNS servers simply take the domain name use us and find the IP address for this domain name, then hang us up to this IP address.  I was getting the error message was that I had to check my DNS settings or enter the IP address, so it seemed logical to me that if I could ignore these servers DNS Dingo with their "now, I'm going to do, now I do not want" bad attitude, maybe I could connect directly with mail servers.  Your tip on how to find the IP address of mail servers in scathing them was the missing piece, I needed.  I deleted the names of POP and SMTP servers for each account that I have would establish in VersaMail, replacing them with the appropriate IP addresses and I can connect now reliable with all servers, first time, every time - and lightning -fast.

  Thanks for your help!

  Message relates to: Palm TX

• Need name of the model for non-fonctionnel vaio pcg - 61611L

  My model name is NOT LISTED on the bottom of the unit. It's a vaio that PCG-61611 l UNIT DOES NOT WORK. SITE INSTRUCTIONS TO FIND THE NAME OF THE MODEL NEED TO TURN ON THE UNIT. I want to buy a new motherboard, the average of the one thing in my path is not knowing the name of the model.

  alienjack,

  Please provide me with the product code + serial number or the serial number and I can provide you with the part number for the motherboard.

• Vista fails to resolve the name of Server 2003 on a domain

  I have several computers and two servers configured as a domain.

  Server1 - Server 2008: domain controller, print server

  Server2 - Server 2003: Server terminal server, file server

  V1 - V10 - Vista desktop computers

  Recently an office has been infected with a virus. I clean with AVG Live CD and then with Avira. At the moment, it seems that the virus has disappeared completely.

  As meeting the office in question cannot resolve the name NetBIOS of Server2, but find other machines on the network very well. I placed the entries in the file hosts and lmhosts with no effect. Connection via the address IP of Server2 works well though, so it doesn't seem to be a permission problem.

  We know troubleshooting step by step for such a question?

  http://TechNet.Microsoft.com/en-us/WindowsServer/default.aspx

  They will help you in the above Server Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• Make a name virtual server HTTPS only

  I am using BCI 11.1.7 and using the Web Cache, OSH, and WebLogic.  I have several servers to virtual name defined in OSH.  I want to implement that one of them is only connected via HTTPS and HTTP requests are redirected to the HTTPS version.  I tried the obvious thing, using mod_rewrite in the configuration of the virtual server in OSH to redirect the HTTP requests:

  RewriteCond %{HTTPS} off

  RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [R,L]

  Of course since all the traffic of the OHS Web Cache using HTTP this simply causes an endless loop of redirects.

  So I wonder if there is a header, or something sent by Web Cache, I can use to tell if the original application used HTTPS.  Otherwise if there is a way to configure this at the level of the Web Cache, which would work as well.  Otherwise I think I'll finish with a certain configuration of Frankenstein that will be featured on http://www.thedailywtf.com in 2018

  I was dumping all the headers using JSP and found out the header (undocumented?) HTTPS-SSL defined by the WebCache is 'off' or 'on '.  So I used:

  RewriteCond %{HTTP:SSL-Https} !on
RewriteRule ^.*$ https://%{SERVER_NAME}%{REQUEST_URI} [R,L]

• Impossible to mount any NFS data store: unable to resolve host name '< obsolete Server > '.

  Hello

  On a particular ESXi server, whenever I try to mount any NFS data store, I get this error message:

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '172.22.216.64' failed.
  Operation failed, the diagnostic report: unable to resolve host name 'cosmo '.

  Always mention hostname 'cosmo', no matter what server I'm actually trying to mount. 172.22.216.64 is the exact address of the ESXi server.

  'cosmo' was the former name of a desktop linux machine, several months ago has re-installed and renamed in the process. So 'cosmo' is no more and it's just expected that 'cosmo' cannot be resolved. However, the error message mentioning 'cosmo' occurs regardless of what server I try to mount a NFS datastore of. I can't find any references to 'cosmo' in the ESXi server configuration in the vSphere client (although I don't know exactly where to look). I remember that at one point, a NFS datastore was mounted temporarily to 'cosmo' to host the ISO debug files. But no more.

  I tried this same sharing of an another ESXi (running the same version of ESXi) mounted in the same subnet (works great), and I also tried to mount a new NFS share on a server where the ESXi already had another NFS data store mounted from the same server (the data store already mounted works fine (, but attempts to connect to a new data store on the same failed server mentioning the independent 'cosmo' server as mentioned above). I tried to restart the ESXi server, but the problem persists after restarting.

  I'm under vSphere client 5.0.0 Build 455964 and ESXi 5.0.0 - 469512-standard with the free license. Because of the free license (I think), I don't have SSH access on the server. (Is that right?)

  How to work around the error message mentioning the obsolete server 'cosmo '? The only thing I can think of right now is to move all data from the local data store to a store of data already mounted, reinstall the ESXi server and give all the data. I'm hoping for a simpler solution! :-)

  Peter

  Can you confirm if this solution works for you?

• Do we need Oracle HTTP server to host Oracle Apex?

  We are completely new to this Oracle Apex.
  
  Wanted to know the license part of it, before you enter into it.
  
  I guess Oracle Apex is free because it comes with the Oracle database license.
  
  (1) do we need a sort of HTTP server to host the Summit on the browser?
  
  (2) any HTTP server will be working with Oracle Apex?
  
  (3) any other free Oracle tool that we can use instead of licensing Oracle HTTP server for this Summit?
  
  Correct me if I'm wrong.
  
  Thanks in advance for the gurus here.

  johnpau2013 wrote:
  We are completely new to this Oracle Apex.

  Wanted to know the license part of it, before you enter into it.

  I guess Oracle Apex is free because it comes with the Oracle database license.

  (1) do we need a sort of HTTP server to host the Summit on the browser?

  Yes.

  (2) any HTTP server will be working with Oracle Apex?

  N °

  (3) any other free Oracle tool that we can use instead of licensing Oracle HTTP server for this Summit?

  Correct me if I'm wrong.

  OHS is covered by the license of DB if OHS is running on the same server. See the post on Joel and the document it connects to: + {message identifier: = 9256804} +.

  For more information on APEX HTTP server options, see:

• +Description Oracle Application Express Architecture+.
  
• +On the choice of a HTTP Server.
  
• Requirements ofHTTP Server+.
  
• Listener of the APEX

• Need name of the API to create the hierarchy of the Organization for Oracle HRMS

  Hi all
  
  
  
  (1) name of the API need to create the hierarchy of the Organization for Oracle HRMS
  
  (2) in the form of the Organization, we have added the Classification, 'HR'.
  When we press 'Costing Information' is displayed.
  We need to download this Information of costs in the body through the API.
  Which API should we used?
  
  This is urgent.
  Any help in that regard will be highly appreciated
  
  Thank you

  Hi, Ahmed.

  You can find all the APIs here-
  http://irep11i10.Oracle.com

  Hierarchy of org-
  http://irep11i10.oracle.com/OA_HTML/OA.jsp?page=/oracle/apps/fnd/rep/webui/InterfaceListPG&BusinessEntity=PER_ORGANIZATION_HIERARCHY&Title=Organization+Hierarchy&retainAM=Y&_ti=2010961940&oapc=7&selection=11_1_62_&oas=s6j2chTrx3F6QeAofgAR-Q..

  To check information of costs - create the organization information (information of costs goes into HR_Organization_Information table, just check for the correct contexts)
  http://irep11i10.Oracle.com/OA_HTML/OA.jsp?page=/Oracle/Apps/FND/Rep/WebUI/PLSQLInterfaceDetailsPG&CategoryValue=F&_tI=2010961940&retainAM=Y&addBreadCrumb=Y&OAPC=16&OAS=rEOv_-poEcBvZjTjyrCnXw...

  http://irep11i10.oracle.com/OA_HTML/OA.jsp?page=/oracle/apps/fnd/rep/webui/InterfaceListPG&BusinessEntity=HR_ORGANIZATION&Title=HRMS+Organization&retainAM=Y&_ti=2010961940&selection=11_1_49_&oapc=28&oas=Ns8RX2ZaTcv6y_BMwx0d7Q..

  Hope that helps.

  If the links above do not work. Try to copy - paste the full URL in a new window. It should work.

  See you soon,.
  Vigneswar ben ahmed

  PS: You can also try loading. The free version should suffice. And it is a wonderful tool.
  http://www.dataLoad.com/downloads/index.html

• Set the name of server report dynamically at run time

  Hi guru,.
  
  I called reports of the forms that I hardcode the name of report server in my code.
  Is there no alternative to set the server name of report dynamically at run time, is how to find the name of the report server and that in through my code as a parameter.
  
  
  can you give some examples of codes... Thank you

  One way that we usually followed before was to store the name of the report server in other tables in the database, then choose this name whenever we want to run a report.

  In this way, it is easy even if there is no change in the name of the server.

• name of database name - confused Server vs

  Hi all
  I am looking at the API OracleDataSource, what say the docs:
  
  databaseName, string name of the particular database on the server. Also known as the SID in the Oracle terminology.
  
  Servername String the name of the database server
  
  
  I know the databaseName and can also find using select name from v$ database;
  
  But how to find the name of the server? Any file or command that can be used to find this info?
  
  
  Thanks in advance

  The server name is the name of the area where your database resides. You can ask your Sysdba to give you that. IF you are on the same square, servername can be replaced with localhost.
  HTH
  Aman...

• Satellite A350 - I need a new servant key

  Hey everybody.

  I own a Toshiba Satellite A350.

  Last night, my arrow clicked out of place, and now I'm sure that among the main features of restraint is broken, only a tiny part of any restraints is broken, and the key pegs not in place.

  I went at least 4 different computer stores today and not had a chance to find a place that sells these restraint systems, one place, however, suggested I'm the manufacturer, then do I call the Toshiba support or something?

  With this model, is it possible for me to solve this problem of restraint/key, or I will have to consider a professional?

  I think that you will not find a servant key because these parts are not available. If a key is broken or something on the keyboard, you have to replace the full keyboard.

  What can you do now?
  Well, in your case I would contact the nearest ASP that you can find on the Toshiba site. Explain the situation and the ASP can order a new keyboard and if you want to exchange it.
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Need help, Windows Server 2008 r2, some registry files deleted by mistake

  In the editor to register Windows Server 2008 r2 by mistake I deleted some files in the windows registry, and after this Server does not start, please help is it possible to repair the registry or recover the server. and also I did not recover the system image.

  concerning
  Sudarshan

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• After that I used movie maker and try to post it on facebook, it is said that I have need a Visual server that is sharing media of Neptune or Mydeo, how can I by pass them and post another way?

  ITI said after that I made my movie with windows movie maker and try to publish it after that I backed up, to publish on the web, it tells me that I need a video host to publish on the web, and it is either share media Neptune or Mydeo, I want to display on my page facebook, how can I work around these video hosting web sites?

  Hey Danny,

  I suggest you to refer to the help article and check if it helps.

  Download & watch videos

  http://www.Facebook.com/help/video

  If the problem persists after the query in Face book support forum for better support.
  www.Facebook.com/help/

  It will be useful.

• Need help sql server 2008 management Studio.

  I imported a sql database to use Expression Web 4 according to a tutorial I followed from C:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA. Later, SQL Server 2008 Management Studio running on XP3 returns error that it is impossible to browse the database, which is still on display in the DATA folder that contains all the other databases, as well as in the Expression Web folder, in that it has been copied. How the database for me to work with Management Studio? Glaust

  Glaust, did you eventually get this working or is this even a question? If you can provide a little more information about what you were doing to import you talk. Am I right in assuming that your instance of SQL Server has the database is available for you to access through SSMS. Then, you have completed the import and now you can see the DB in the SSMS DB tree but you get the error and are unable to access the DB?

  Thank you