Need of the configuration file for a program engine tuning?
looking for a file? for a DOS program run on my computer vista laptop, the DOS program is to grant an engine computer, I have the program loaded back and it opens but it does not connect to the engine computer.
I was told I needed a file of configuration of microsoft office for it to run, but I can't find something that works
This is the Forum for Vista programs.
http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads
They will help you with your question in Vista Hardware and drivers Forum above.
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Hello
I need details of the basic configuration for the execution of a simple xml in documaker 12. Details such as printer, configuration of the recipient, etc..
Hello Sen,
You can set below the sections of XML configuration related in addition to the configuration manager of DB and the General library which is necessary for Documaker version 12.x. The configuration of the printer may not require changes from the flat file extracted mode. Make sure the entrance of afgjob; BatchingByRecipINI; is in place too.
< extractkeyfield="">
Masque_recherche = 1,<>
[RECIP_NAMES]
ZERO = 000,
FC = 101, COPY FULL
< batchingbyrecip="">
DefaultBatch = BATCH1
Batch_Recip_def =! RecipientRecord [RecipientDescription = "Full copy"]; "' BATCH1 '; FC
< runmode="">
NAUNLOAD = Yes
XMLExtract = Yes
DownLoadFAP = Yes
ChkDstLenExceeded = No
LoadCordFAP = No
CheckNextRecip = No
CompiledFAP = No
< trn_fields="">
SystemInd =! TransactionRecord/TransactionKey/SystemIndicator
TransactionNum =! TransactionRecord/TransactionKey/TransactionNumber
LOB =! PolicyRecord/LOB
Iteration =! TransactionRecord/TransactionKey/Iteration
-
get the location of the configuration file for each virtual in a cluster
Is there way in the cli of power for a list of the location of each file in the configuration of the virtual machines in a cluster? or even each file configuration on data warehouses?
Thank you
For all the virtual machines on the VIServer (s) connected
Get - VM | Select Name, @{N = "VM Config file"; {E = {$_.extensiondata.config.files.vmpathname}}Or if you just want to a single data storeGet-Datastore| Get - VM | Select Name, @{N = "VM Config file"; {E = {$_.extensiondata.config.files.vmpathname}} Replacewith the data store you want to run it against, for example to run it against Datastore01 Get-Datastore Datastore01 | Get - VM | Select Name, @{N = "VM Config file"; {E = {$_.extensiondata.config.files.vmpathname}} -
How can I get the configuration file for installed software to the other PC
Hello
My car is Zion & I'm managing the all COMPUTER software & hardware requirement, my request is that if I go to the option of payment, how can I get license information and the invoice of Adobe and can you install the software in different PC.
I am not able to contact by phone if possible please contact me or send me email with the solutions.
Thanks and greetings
Executive Shaikh
[personal information deleted - mod]
Hi Rafiques27191756,
Looks like you ask for assistance with a volume license. If this is the case, information about purchase of Adobe programs are available here: Adobe licensing, discounts | Adobe purchase programs. If you buy a volume license, you will be able to view and manage your account as well as learn how to deploy the software on different PC on the Site Web of Adobe License. In the meantime, you can get individual help in contacting customer service by using cat.
In case you have any questions about the purchase and deployment of a volume license, I'm moving this discussion to the deployment to the Cloud, business, & CS creative team. If you are interested in individual licenses instead, please let me know and I will move the discussion in a more appropriate forum... For the record, every single license can be activated on up to two computers.
Let us know if we can provide more information or assistance.
Best,
Del
-
Where can I find the configuration files for CS5?
I've upgraded to Win10 requiring a complete operating system and wiped reinstallation on all my installed software. I reinstalled everything except my Adobe products. I'm a minimum user but like Photoshop and Bridge. On the page products registered, according to the Plans and the price, I can see my serial number and date of purchase, but when I click on history commands, it is said, "we didn't find any orders placed on your account.
Where can I find the download package to be there?
Thanks in advance.
Hello
You can download CS5 via the below link.
Download Adobe Creative Suite 5 products
Hope this will help.
Let us know if any other help is required.
Kind regards
Sandrine
-
Cannot find the configuration file for the new computer and my old download Info
Lost
Hello
If you have purchased the commercial version on adobe online:
a. then connect on adobe.com and go to 'My Adobe' > 'my orders'. You can see the order dates. Click on the date to which you have placed the order and you will find the serial number and download link.
b. If you have registered it under your Adobe account, then navigate to 'My Adobe' > 'my products'.
If it's an order of Volume Licensing:
Go to licensing.adobe.com, enter your credentials and click on "licenses" > retrieve serial number. Select the code to deploy or final user ID that is used to pass the command and click on search. You should now see the serial numbers.
The following link also lets you learn how to retrieve series volume without https://helpx.adobe.com/x-productkb/policy-pricing/volume-licensing-site.html
If you have purchased the order download from an Adobe reseller, you can contact the dealer where you bought it or contact customer service Adobe customer service
-
How can I identify the name of the invisible file for a backup file successfully to an external hard drive USB2 separate? I use Windows Vista backup program (Service Pack 2), and I need to do backups plus two from other computers on the same external hard drive. To do this, I think I would need to identify each backup file separate I know which file to specify if I need to do a restore.
How can I accomplish this? The program does not seem to give me the ability to specify a file to which to write the backup during a given session files. In addition, I do not understand why I can not see the file name in Windows Explorer - my files options are defined to be able to view hidden and system. Would be grateful for any help you can provide, tonight if possible. Best regards, Oliver for Norm
Hello
See this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-or-change-automatic-backup-settings
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-your-programs-system-settings-and-files
-
How can I re - attach the data files for the programs?
Original title:
reconnection of the files
BONE had to be reinstalled. All data is saved but lost programs. Programs now reinstalled, but how can I re - attach the data files for the programs?
Hello
You copy the data on your computer (Documents, Photos, etc.) and file extensions should be automatically associated with programs they have written in.
Otherwise:
"Changing programs by default by using Set Program Access and defaults of the computer"
http://Windows.Microsoft.com/en-us/Windows/set-program-access-computer-defaults#1TC=Windows-7
"How to change file Associations in Windows 7 and Windows 8.
http://www.7tutorials.com/how-associate-file-type-or-protocol-program
See you soon.
-
Configuration file for the VPN concentrator
Hello
I have a text-based VPN concentrator configuration file, and I want to know if there is a configuration guide of Concentrator VPN that I can use to refer to this file. The configuration on cisco.com guide is currently for the GUI based configuration.
Furthermore, if there is a tool/utility that will read the configuration file in the format GUI without physical access to the device, which will also help.
Thanks in advance for any assistance.
There is a "XML export screen" in the management section of the files on the VPN concentrator. You can export the current configuration of the concentrator in a XML format, which provides the labels and values for the fields in the configuration file.
-
When I try to open the application in the administrator account it say - could not save the settings: unable to create a configuration file for the required configuration object
Thanks for the reply.i think that a virus changed I scan my computer and discovered C:\users\jason\AppData\local\temp\low\temporary internet files\content. IE5\TLIFXGRH\ why is Task Manager disabled people [1]
-
I use a Pavilion dm4 laptop running Windows 7 Professional. I need to store a configuration file in a folder that is located in the tree files (x 86). I'm using an account with administrator privileges, but am unable to change the properties of the progam (x 86) files and subfolders of read-only. When I try to do it seems to work, but on the control again, read properties only screen returns. I am also unable to change the settings for the administrator of this file - buttons, checkboxes, etc are all grayed out.
Hello
Download the utility which will add "Take Ownership" to the contextual right click menu. The download is on the following link.
It is a zipped file. If you do not have an extraction utility installed, download and install 7-Zip (if you have a 64-bit version of Windows, you need this version of 7-Zip ) which can be used to open it so that you can run the Setup program. Then just right click the folder zipped, select 7 - Zip and extract the files. When you're done, open the newly extracted folder and you can find the utility to add "Take Ownership" to the right click menu. Double-click it to install it and then close the window.
Navigate to the folder of the program that you need to store the configuration file, right click and select 'Take Ownership'. You should now be to paste the configuration file in this folder.
Kind regards
DP - K
-
Disabling update the configuration file without stopping the VI
I would like to perform a function that when the new modules are added in the existing system of the public Service or hot swapping modules autour, the VI can update its configuration file. I don't want the VI to stop we will collect data 24/7.
I use cFP2220 and two or three modules of different types. I have my work VI and it is fairly straightforward FP read.vi in a time loop. All data are stored in the database using the Labview database tool. My screws are hosted on the local PC, not on the controller. I'm using Labview 8.6.
I guess I have to get the file configuration (iak), whenever new modules are added, the iak file can be changed (without MAX aperture). In any case, I would have the flexibility to run the VI continuous. I know there is a similar code here: http://zone.ni.com/devzone/cda/epd/p/id/3221and they get the configuration file in the ini file. But I don't know how it's done as I can save only the configuration file as a file iak for FP system.
Another potential problem associated with that, I guess, is the database format. For now, I use a three column structure, i.e., DateStamp, value and ChannelID. In this case, if I want to add/remove/swap channels, I can just change the ID of the corresponding channel. What happens if I have a horizontal arrangement of the database, namely 10 columns corresponding to 10 sensors, would he be in trouble if I change channels modules?
Thank you very much.
There is a way to change the module and programmatically updated the IAK file without stopping the VI. You will need to change the FP read.vi front right by with the constant e/s FieldPoint. You will need to use the Open FP, FP create Tag, read FP, and close to the public Service. The trick to this is that you must pre-create files IAK in MAX first. The way to do is to set up your cart in a configuration and then find devices to MAX. Then save the iak. Then reorganize your bottom of basket to the next setting would have desired, then have MAX find devices and who save in a file different iak. You will need to do this for each configuration you have. Then, you need to place the code below when you want to Ministry the configuration file. I have also included a screenshot of MAX that you can see what the strings are correlated with.
-
Original title: can not access the configuration file because I'm not the administrator, even if I'm the only person who uses this computer
I bought Windows 7 Professional on a new computer, because a program that I use every day may run in XP mode. Configure XP mode and when it asked for a password that I left it empty and press to enter. When I try to enter in the file config on XP the message "is client\users\administrator is not accessible." You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permission.
I downloaded the andxp of MS virtual pc mode because this 8 year and plu program will be run in this mode. I copied the old computer config file and you want to replace the file loaded when I installed the program on the new computer. Who will save me load all data files (more than 80) and not to recreate the data in these files that I changed. I installed the program from the original disc and it is implemented very well except for the config file.
There are two user fence: virtual XP-admin and virtual user of XP-88950xp.
The only program I installed XP mode is this one.
Thank you.
Hugh Humphreys
Hi Hugh Humphreys,
Leave the password empty section and see if the XPMUSER can be accessed.
Method 1: If the problem persists, you can try to access Windows XP Mode with the default account named "Administrator". This account appears when we get into Safe Mode. By default, there is no password for this account, and the password is determined when you set up the Windows XP Mode. We can use this account to reset the password of the other accounts password. To do this, follow these steps:
(a) Firstly, disable the integration features.
(b) restart Windows XP Mode. When the Boot Menu appears on startup, press F8. (Continue to press the F8 key until the Windows Startup menu is displayed.)
(c) on the advanced Windows Menu of Options, select Safe Mode and press ENTER.
(d) log in Windows by using the administrator account and the password.
Note: The password is empty by default unless you already set a password.
(e) after the connection mode safe, click on "Start", go to "run", type "nusrmgr.cpl" (without the quotes) and press ENTER.
(f) choose the user you want to change and click 'reset password'. Set a new password.
(g) click on "Advanced" tab, click on the button "Advanced".
(h) click on "users". The choice of the user you want to edit in the right pane. It to the right and click on "Properties".
(i) check the "password never expires". Click on 'OK'.
(j) then exit the settings and restart Windows XP Mode to normal mode.
Method 2: Please try following the steps for the computer to remember the credentials and do not ask the password to open each programs:
(a) when he asks for a password, click Cancel. Without integration feature, you are allowed to log on with an account that does not have a password.
(b) set a password for your current user.
(c) click on tools on Windows Virtual PC, choose enable integration features.
i. type the password, check the box "Remember my credentials" and click OK to open a session.
II. after joining the domain, logon in XP mode with the local administrator account.
If this does not work, post your request in the TechNet forums to get help.
http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads
-
What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.
I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.
Thank you
"Privoxy" is a 3rd party is no program not part of Windows XP. You can go to
Panel-> Add/Remove programs
and remove this program. If you still think that you need this program, try reinstalling it on Sourceforge
<>http://sourceforge.NET/projects/ijbswa >HTH,
JW -
I need help solving this for first
How to fixERROR: DF024: impossible to preserve the original file to "C:\Program Files (x 86) \Common" error 5 access is denied. (Seq 1)
Hi Lewis,
Please try the below mentioned steps.
1. try Hidden Admin account (Win) or enable the Root user account and try to install it.
- Enable and disable the built-in Administrator (Standard 7 SP1) account
- Activation and use of the user 'root' on OS X - Apple support
2 troubleshooting install problems with log files. CS5, CS5.5, CS6
Thank you
Atul Saini
Maybe you are looking for
-
Cloning - problems point source
I have problems with cloning with respect to the selection of a point source. I option-click on the area that I want to clone but when I use the brush to clone it works for part of the part of beginning of the brush but clone pixels, I did not choose
-
Upgrade RAM and disk on Tecra 8000
I have a toshiba tecra 8000 p2 266 mhz, 64 MB, 6 GB HD. My question is I want to upgrade the ram and hard drive. can someone tell me what is the maximum I can put in my laptop. IM aiming for a 256 RAM and 40 GB HARD drive... I want to upgrade the pro
-
Satellite C660 - several keyboard LAG
Hello I was the owner of a Toshiba Satellite C660 for about five days, and I already feel lag serious keyboard. As users of the model L270 and other posters on this forum, the keyboard has slowed down considerably and letters are being omitted, slow
-
I have firefox installed on both computers. The office displays not the split screen, but the laptop don't. I checked the posts and I have not the separator module of fox but still get the split screen when I click on a second site.
-
Want 5530: Install 5530 want twice on same PC with different printer profiles
Running Windows 7 Pro. I want to install my 5530 printer like the first time with the name of the printer that includes 1 side printed and it default profile 1 side printed. I would then like to install this same printer a second time, but with a