Need physical size of the monitor

Similar Questions

• Physical size and the type of disk hard drive in my XPS M1210?

  Hi, for the first time poster here. I'm about to buy a new hard drive to replace the original one in my XPS M1210. I just need to know the physical size (3.5 "? 2.5"? etc) and type (7200 rpm or something else?) of him so I don't know the correct type to buy and replace by.

  Thank you!

  notch16

  The physical size of the SATA hard drive is, 9.5 MM x 2.5 ", either 5400 or 7200 RPM works perfectly.

  Bev.

• restrict the physical size of the wifi network

  Hello

  I intend to cover the building 80x80m by the amount of 1131AG APs and WLC4402 controller. But the strong demand of the customer is to physically restrain the posibilities of the long distance wifi connections (100 m and more building).

  Is there a function in wifi Cisco to drop connections incoming in case if the customer is 100 + m AP? (I mean that the power of the customer is high enough for this)

  What are the regular methods of resricting the physical size of the wifi networks?

  Thank you.

  Someone could be more than 100 meters away using a parabolic grid antenna, and the signal strength is perhaps not different from your regular users.

  You can try using the location device, but I think that even this might go a little goofy, if someone tries to spoof a MAC address.

• Change the size of the monitor

  I can't find how to change the size of my screen/desktop.  I have a new screen square, and it distorts the view of everything, so I want to reduce the height of what I see, but not the width.

  Right-click any empty field office. In the pop-up menu, click on 'Properties', then click on "Display properties", then click on the 'Settings' tab, then move the slider to a resolution which essentially corresponds to the shape of your screen (there will be forms of screen if displayed when you move the scroll bar). Experiment with similar screen shapes and their corresponding resolutions to see which is the best and the strongest of your monitor. When you test the choice of screen resolution, it will open another small window, asking you if you want to keep this choice, or he will return to the previous resolution. If, after choosing a screen resolution, you think that the font size of the text is too small, then click on the button "Advanced" in this same settings tab, click the more choices of font size (120 dpi) and follow the prompts to complete the change.

• How to resize the size of the monitor back to normal screen

  Windows 7 Home Premium. Everything works fine except, Wednesday l found the problem on the taskbar.
  My problem is that: I'm not able to get the clock and some of the notification in the taskbar icons.
  All these are staggered on the screen and do not appear in the taskbar.
  How do l resize the length of the taskbar? or retrieve the notifications mentioned above.

  Hello Alfred.

  Thank you for the information.

  Screenshot, it seems that the screen size is correct by Windows.

  If you still have questions try resetting the default monitor settinngs. You can see the monitor manual to reset the default monitor settings.

  Thank you

• You can change the default size of the monitor of video in EP 13 window?

  Please can someone confirm if it is possible to change the default size of the clip in the first elements 13 monitor window. The research of this issue brings an answer to someone who asked the same question about EP 7; the answer would then open the clip monitor window, adjust its size and then let it open for the duration of the editing session. Is it still valid for PE 13, or is there another way to adjust the default size of the window so that the next session opens to the same size as the last one? Help appreciated.

  CD.

  Technically, no. When you double-click a clip, it will appear roughly the same size, in the center of the interface.

  My solution, however, is to open the monitor Clip and then let it open, stop on the side. (I have a dual monitor computer, so I can move it away from the rest of the interface if I'd like.) As long as it remains open, it will stay in the same place and size that you double-click to open other clips in it.

• HOWTO: Reduce the physical size of the lrcat file?

  My cat may have reached the maximum size supported by the HDD to fat32 format. (4GiByte).

  Therefore, the cat entries in a different catalog import fails. It says nothing about the reason, but I suspect that the size of the file to the destination lrcat file would be the cause of the problem.

  I deleted now already a large part of the images of the cat, but even after optimization and backup the file, he still has this huge size.

  How can I reduce the size of the file of the lrcat file?

  Thanks in advance!

  Unless you have plugins that store masses of stuff in your catalog, info more is historical edition.

  You can change manually clear history (lotsa work) or via the plug-in free depending on whether I wrote:

  Dev history editor

  or using a sqlite client application.

  You can clean extrinsic plugin info (assuming you don't need more) using another plugin free I wrote:

  Pretend

  or using a sqlite client application.

  PS - my most frequently used preset:

  http://www.robcole.com/LrForumSupport/clear%20Edit%20History.zip

  PPS - an another possible solution: reformat drive using a more modern file system format.

• Problem of size for the monitor program

  I'm able to import PP CS5 .mpeg files.  However, so that my auto monitor sizes properly Source material, the same material appears zoomed in on my monitor the program.  I chose "Fit" as the size of the program monitor.  How can I fix it?  Is this the result of my project preferences maybe?  Thank you.

  Right click on the clips, choose scale to the size of the image.

• Need help to connect the monitor to Dell Inspiron Dell

  I recently bought a laptop computer Inspiron 17R in order to reduce the use of my laptop Precision M6600. A Dell U2312HM monitor has been used precisely as a second monitor and I want to use with the Inspiron system newly acquired as a second monitor. The different video ports on both of these computers and I failed to get the monitor to work with the Inspiron. While the accuracy using an older VGA connection, the new Inspiron using a HDMI connection. To further complicate the issue, the monitor has several ports to connect to a source of video output, which includes the DisplayPort, DVI, VGA and ports for USB connections upstream and downstream, but not including HDMI. I used a DisplayPort to HDMI Cable adapter trying to to connect the Inspiron to the monitor, but could not produce an image on the screen of the monitor. This continuous monitor to answer correctly when it is attached to the precision via the VGA cable & port so I'm confused as to why I had no luck by attaching the monitor to the new system with the adapter DisplayPort to HDMI. How can the Inspiron 17R be connected to the monitor Dell U2312HM?

  Computer output HDMI cannot convert a monitor of DP (DisplayPort) using a straight through cable.
  What you have purchased is designed to do the opposite.
  Computer RFP out for monitor HDMI in

  Regardless of the port, you will get only ever 1920 x 1080 on the U2313HM. Return this cable. Buy a DVI HDMI to =.
  Computer output HDMI--> HDMI DVI--> DVI U2313HM Cable in

• The front panel scroll, based on the size of the monitor

  Hi guys,.

  I built an exe file of a VI on a labview having machine so that it can be run in another has no labview. The machine where I programmed the VI has a large 22 "monitor and so I put on my face as a result. The machine that will use the exe file has a screen size of 15 ", and some elements of the front panel are not accessible if I make an enlargement. However if I don't maximize the screen I can move the window to the edge and access controls. But it's so heavy. Is there a way I can add scroll bars to the VI while I can scroll the front panel?

  Thank you

  Of course.

  Scrolls bars are something that you can turn on (and are normally enabled by default) in the dialog box properties VI of VI.

  In addition, it is usually best to design your sign before and that it is effective for the smallest screen size you expect that it runs.

• How to get the physical size of the screen?

  Hi all

  How to get the physical width and height of the screen (not resolution) in inches or in centimeters?

  Is there a method to do

  Thank you very much

  Display.getWidth () and Display.getHeight () you will get the number of pixels.

  Display.getHorizontalResolution (); and Display.getVerticalResolution () to get the pixels per meter.  Then by dividing appropriately you can find the actual size.

• Display exceeds the size of the monitor screen

  Hello

  I just bought a HP 5208uk (without a monitor). Connected to a (digital) TV via vga on a resolution of 1024 x 768 and dvi on the 1080ix60 resolution (two settings came automatically).

  The display of the Office is outside the borders of the screen, regardless of the I use (vga or dvi).

  I tried to update the drivers (pc and tv to date), playing with the resolutions (does not work) and using the Troubleshoot utility that tells me all is well.

  Please anyone know how I can solve this problem, ideally use dvi?

  All the answers, including blind sarcasm, are welcome, and I would be really grateful to be.

  Thank you

  * Bleep *, welcome to the forum.

  Well, I couldn't come up with any brainless sarcasm, but here's an idea on how you can solve the problem.

  I will try to completely uninstall the video driver.  Sometimes, a new facility from scratch can assign problems.  Then, install the latest driver.  I did this job several times over the years.

• Physical size of the screen of PB.

  Does anyone know for sure physycal dimensions of the area of the screen?

  I made the simple calculation and finished with

  ~3.54"X6.04' which i about 9x15cm (I guess the point of the LCD screen's square)

  Am I wrong?

  It is important to at least on the 'paper' simulate 'real' UI look

  You guys have all forgotten the webcast 'Interface Instructions user' already. :-) (Those of you who have seen it... those of you who did not yet should be able to download the PDF of the presentation by registering and start watching the webcast, then using download down links left.)

  Page 8 says screen size is 153,6 mm x 90 mm. 169,3 pixels per inch, or 0.15 mm dot pitch.

• The physical size of ACS db is more than 50% of its actual size. (ACS version: 5.5.0.46)

  Since the Migration to ACS 5.5.0.46 we continue to see the following message appears in the Inbox of alarm

  Cisco Secure ACS alarm (REVIEW): the physical size of ACS db is more than 50% of its actual size.

  Cisco Secure ACS - Alarm Notification
  Severity: critical

  Name of the alarm	System alarm [purge the database]
  Cause/trigger	The physical size of ACS db is more than 50% of its actual size.
  Alarm details	The physical size of ACS db is more than 50% of its actual size de.the size will be reduced after the purge ACS transaction log and compress ACS db.
  September	Mon Mar 17 05:00:06 THIS 2014

  ACS view Compression and backup database is set up and runs without error:

  The work of backup stores a maximum of 4 months to a FTP server.

  Backup: monthly

  Incremental: weekly

  DB: Compression enabled

  Purge and incremental backup history

  Name	Start Time	End Time	Status

  DatabasePurge-Job

  Mon Mar 17 04:00 THIS 2014

  Mon Mar 17 04:00 THIS 2014

  Completed

  as far as I can see the CLI avoid a DB oversized:

  ACS21/acsadmin(config-ACS) # acsview show-dbsize
  Actual size of DB (bytes): 1585192960
  Real DB size (GBs): 1.48
  DB size (bytes): 1605386240
  Physical size DB (GBs): 1.5
  Physical ACSviewlog file size (GBs): 0
  Output ACS21/acsadmin(config-ACS) #.

  ACS21 / admin # display the status of the acs application

  Role of the ACS: PRIMARY

  Process of database ' ' running
  'Management' running process
  'Runtime' running process
  "Adclient" process running
  'Ntpd' running process
  "View-database" running process
  "View-jobmanager' running process
  "View-alertmanager' running process
  "Notice-collector' running process
  "View-logprocessor' running process

  Looking at the user guide:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_control_system/5-5/user/guide/acsuserguide/viewer_sys_ops.html#wp1065174

  "The ACS database must be compressed during the maintenance operation. You can run the command acsview-db-compress acs-config mode to reduce the physical size of the database of view when there is a difference between the physical size and the actual size of the database to view. ACS 5.5 stops only the collector newspaper services during compress the operation and will be operational after the compression operation is complete. You must enable the recovery of the newspaper feature retrieve messages received during the compression of database operation.

  In ACS 5.5, database compression operation is automated. You can check the box enable ACS view compress database to compress the ACS database view automatically daily at 05:00 the compression of database operation is executed every day automatically at 05:00 whenever needed. »

  I tried to manually compress DB by "acsview-db-compress' with no effect.

  Hello

  You are running in the CSCum51180bug. The alarm should be a warning, not criticism and should be triggered only when the physical size is greater than the actual size of more than one gigabyte (in your case, the difference is very small, 1.5 vs 1.48).

  The fix must be present on a future update.

  Javier Henderson

  Cisco Systems

• Difficulty the front Dimension of the array, but allow the user to change the size of the array

  Hello

  I know there are a few other posts on table and scroll bars but mine is a little different. I want to have the physical size of the fixed table control and allow the user to change the size of the array as required and a scroll bar if the number of elements exceeds the specified physical dimension. I wouldn't mind if, at the end of the scroll bar, the user sees an uninitialized element.

  Thank you very much

  Hello

  The problem I have with the property Num Row node is it seems to replace the scroll bar. Whenever I try to change the line number, the table automatically resizes its physical size on the front and the scroll bar has no effect.

  However, I solved the problem by taking row completely digital. I just said if the table size is > to a constant value (i.e. 3), add a scroll bar and my front panel dashboard to be a size larger than what the value of this constant is size. Once I begin to add values in sequential order and I get to the fourth value, the scroll bar is added and the scroll bar has a feature where it adds an element of null for you, so if I fill this null element I just increased the size of the table and another null element appears underneath.

  Thanks for the help