need RAID drivers from initial operating system installation

Similar Questions

• How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Problem:  After I do a backup one using ghettoVCB on a local VMFS volume, I have a virtual machine that I can start something happened to that running.  However, sometimes I just need a file from the OS level, which means that I would need to start to get them, but then I have an IP address conflict.  I can't imagine a way to have the NICs turned off and still be able to move the file.  If I change the IP addresses, the software that I need to create the file that I need to transfer no longer works because, although there no need of constant connectivity to the seller, it is locked to the public IP address.

  Material:  I have two 4 ESXi hosts to work, each with local VMFS volumes.  They share a private vlan common and a vlan common public.  They each ssh, ftp, wput, wget, and rsync available.  I have a Windows 2003 Server VM which also hosts a NFS and the VI client and other VMWare tools.  It also has private and public interfaces as do virtual machines that would be to make and receive the OS files.

  Question:  How can I transfer a file from the operating system to a backup of the production running VM virtual machine?

  Thank you!

  Yes Mr President, make sure you set the network on this virtual machine to be connected to the 'Internal' vswitch, you set up before turning the power on to the virtual machine.

  -

• I need to upgrade the entire operating system, in order to get Safari 8.0?

  Apparently, my Bank now requires Safari 8.0 continue to use their online service.

  10.7.5 running w/safari 6.1.6... can't seem to find an update to version 8.0.

  I need to upgrade the entire operating system, in order to get Safari 8.0?

  How the last OS are there, more on Intel 2.4 GHz Core i5?

  Compatibility problems, that I should be aware, before I update?

  1. Yes, or switch to a product such as Firefox.

  2. it depends on the amount of RAM in the computer. She should have at least 4 GB.

  3. click here and search for your software.

  (138498)

• 'touch patches security or performance' is absent from my operating system. __

  Diagnosis of Norton report "key performance or security patches" are missing from my operating system Microsoft Windows Update has nothing for me and the last on 27/10/10 patch has been installed successfully.

  I communicate with Norton and ask them to explain the disparity.

  "Tami1720" wrote in the new message: * e-mail address is removed from the privacy... *

  Diagnosis of Norton report "key performance or security patches" are missing from my operating system Microsoft Windows Update has nothing for me and the last on 27/10/10 patch has been installed successfully.

• I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  I have a laptop broke the rocovery disk not good ahy, I need the windows vista disk operating system how do I get the same themes?

  If Windows Vista was preinstalled on your computer, contact the manufacturer of your computer for a replacement CD. If you purchased a retail version of Windows Vista, contact Microsoft.

  This article in the Microsoft Knowledge Base has the details: How to replace Microsoft software or hardware, order service packs and updates of product and replace product manuals . Boulder computer Maven
  Most Microsoft Valuable Professional

• ODBC drivers missing from the operating system of windows 7 Home premium (64-bit)

  I have a windows 7 premium (64-bit) operating system and I don't have in my ODBC MsAccess etc., it shows only SQL server datsbase how do I get all the other drivers?

  Hi Ana Shareef,

  Getting back to the question of CARI, were you able to successfully install MS Access.  If so, have you received an errors etc after installation?

  In addition, please see the link below for some useful information:

  http://support.Microsoft.com/kb/110093

  I hope this helps! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Inspiron 17R-N7010 new SSD installed, now I need Windows 7 operating system installation CD.

  Hi guys,.

  So my HDD on my Inspiron 17R-N7010 completely stock * on me last week, so I just gritted my teeth and just bought I have completely new SDS and installed last night... now, however, I need to reinstall the operating system. Problem is that when I bought the laptop, Windows 7 is pre-installed, so I don't have to drive to it. How can I do to get an installation disc, and how much it will cost if I can get my laptop up and running again? It's an outdated OS and the laptop is almost 6 years, I can't imagine which costs a lot. There is also a store Microsoft directly by me, can I go ahead and buy the disc of Windows 7 OS you think?

  In addition, the original HARD drive was 640GO and this new SSD is 500 GB, so the recovery disks that I made when I got the laptop are unnecessary since Dell Datasafe Recovery (or whatever we call it) keeps telling me the hard drive needs to at least 590GB of space (or something similar along this message). The smallest space on the SSD isn't going to be a problem with the laptop in general or during installation of operating system Windows 7 is?

  You will need to call Dell - they usually sell a set of recovery media for about $25 in the United States, the United Kingdom and the Canada.

• Satellite A79-S229: need CD to recover the operating system

  Hi, I have just formatted my laptop and I lost my disc withrecovery and aplications with drivers. I need emergency to get a.

  Please help me - Pawel

  Satellite A79-S229 is unknown to me but maybe you meant the Satellite A75-S229.
  In this case, it s an American unit. I mean it was designed for the American market and that's why I recommend you research on the Toshiba site for drivers.
  It of not necessary to have the recovery CD because you can also install the operating system from the original CD of Microsoft Windows and then you can install the drivers of Toshiba.

  But of course the installation of the OS since the recovery CD is very easy and all the drivers, tools and utilities are already preinstalled and are part of the image of Toshiba.
  The recovery CD you should be able to order the service partner in your country.

  Good day

• OfficeJet 6960: Install the HP drivers on VISTA operating system

  I tried to install the drivers from the disc and the HP site and I get the following error. But all the documentation is that this printer is taken in charge under Vista. Can anyone help?

  This computer is not responding it following the system configuration required (s):

  The operating system on this computer is not supported. For a list of operating systems supported, please check HTTP://www.hp.com

  Hello

  The printer is on Vista 32-bit, 64 bit not supported.

  Operating systems supported
  
  32-bit only, 2 GB of available disk space, CD/DVD player or Internet connection, port USB, Microsoft® Internet Explorer 8

  http://store.HP.com/SwitzerlandStore/merch/product.aspx?ID=J7K33A & opt = 625 & salt = PRN & lang = in-ch

  You will need to change your operating system or to replace the printer, 64-bit support is only available for Windows 7 or later.

  Kind regards

  Shlomi

• How to set the resolution on in my XP operating system installation.

  I have a computer that had a copy pirated XP, I bought a genuine copy of XP for the computer I built, however, I was unaware that I could use it only for a computer, and I tried to install it on the computer with the pirated XP operating system.  Then, I was unable to adapt to the resolution on the computer that has the OS piriated.  I then bought another windows XP OS, installed on the computer including the resolution and nine I couldn't settle, (who had the OS piriated), however, I still have the same problem of not being able to set the resolution from 600x400dpi. My attempt to use the first copy of XP on my second computer was planting a virus on it?  What should I do to solve the problem?

  After doing a clean install of the operating system, you must then install the drivers for all your hardware. In your case, install the video card drivers will allow you to change the resolution.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• I need information on upgrading my operating system in order to install the all-in-one printer Officejet 4315

  I bought a printer all-in-one Officejet 4315 with a friend and when I inserted the disc for HP Officejet 4300 series, it only would be not installed said: Action required: click Cancel to exit this software installation.  Install this product on a computer that is running one of the operating systems supported Miscrosoft or refer to your computer documentation for more information on the upgrade of the operating system of your computer.

  Hello

  It is not the operating system that is at fault.

  Need good printer drivers to install correctly.

  Access the site Web of HP Driver on the provided link > select operating system > finding drivers > follow advice on installation of HP.

  He'll also be troubleshooting information at this location.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=1138342&LC=en&cc=us&DLC=en&lang=en&cc=us

  See you soon.

• VMware - script the creation of the vm and the operating system installation process

  Hello.

  Trying to determine the exact steps to automate the entire process of creating a virtual machine, and install a linux OS (Rhel/Centos) in the virtual machine. I need to understand the steps to do it entirely from the CLI using scripts. I have seen a few sites that describe the basic process of creation of the VM, which appears to generate the vmdk file.

  I've seen nothing that shows what needs to happen to install the operating system in the virtual machine, in the CLI. This process should be auto/programming, so I can't use the GUI.

  I imagine that the whole process will have to call the process/kickstart file and start from that somehow, but I don't see how the elements fit. The goal is to then have a VM with the required OS/Apps that are then run / deployed by external users on their machines.

  If this process can work, then we can talk to a Council-expert/vmware on the next phase of the project.

  Answer that be detailing how to proceed, or point of item/sites on that would be great!

  Thank you

  I just tested on a Linux system and had to perform the installation of VMware VIX - 1.10.1 - 266898 two times.  It is not the first time without any message in the log file.

  After a successful installation, I ran a .vmx without first modifying the /usr/lib/vmware-vix/vixwrapper-config.txt file and received the error message waited on the specified version was not found and then after editing it, I was able to run the .vmx using vmrun nogui.

• need a cd with older operating system for an iMac of 1995

  I have an older iMac, there is not an operating system installed on it, although it works.  I need a CD with his own version of OS. Do you know where I can get a.

  The first iMac was introduced in 1998 and comes with OS 8.1.  It is known as the "Bondi Blue" iMac, which is a dark shade of blue-green.  He had a 233 MHz G3 processor and an optical drive tray-loading.  This model was followed by the iMac of fruits of color with a 266 MHz G3 processor.  A faster group of fruit color iMacs were followed, which also had the same optical drive of the plate, but a 333 MHz G3 processor.  Check out this page which lists all iMac models and post back with the model with the plug that matches the one you have.  Knowing that will determine how modern an OS you can install on it.  Check ebay for an OS installation disc, but still looking for the version (Universal Installer) retail disc and not a restore with a software disc incompatible build designed for another Mac model.

• Desktop H500s put in the disk hard windows 10 from another OPERATING SYSTEM PC - ERROR CODE 1962 - No.

  I tried to replace the current hard drive with the disc provided with windows 10 from another PC.

  I have is after having swapped the hard drive. The system cannot load Windows 10 and displays this message "ERROR CODE 1962 - No. OPERATING SYSTEM".

  The main reason I like to swap the drive is because it is a larger and faster disk and it come with Windows 10 Enterprise license. Instead of my current hard drive of Levono who only 8.1 Windows

  I understand that the pilot is maybe a problem. But, I should at least be able to see the Windows screen and I can fix it the driver, instead of the message "ERROR CODE 1962 - No. OPERATING SYSTEM"

  Note: I did I tried to put this disc in the CD player, I've found, it can read the disc. Therefore, should not be SATA non-compliance issue.

  Any suggestion?

  Hope to hear the suggestion

  Dear all

  I managed to fix in Boot "Disable UEFI and activate the legacy", my system is running. I just need to install the audio driver after the system is running

  Usefully it doesn't matter who will help to have the same problem

• HP Deskjet 2050: HP Deskjet 2050 incompatible with the Mac operating system installation

  My laptop doesn't have a hard drive, so I tried to configure the printer remotely by sharing the drive through another computer, but when I tried to install the software, it says "this Setup program is not compatible with the version of the operating system on your computer. It is only compatible with 10.6 and below."

  Then, I went to this link http://support.hp.com/us-en/drivers/selfservice/HP-Deskjet-2050-All-in-One-Printer-series---J5/40274... trying to download the software from the website, but was unable to do so.

  How to set up the printer on my laptop if it shows that it is not compatible with my operating system?

  Hi @AAK21,

  Welcome to the Forums of HP Support! I see you are having problems installing the printer on Yosemite. I want to help you solve this problem. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  You can always try to open the software by following the steps described in this paper: How to open a developer not identified in OS X applications.

  The steps should also work for Yosemite.

  If the problem persists, I would suggest to download and install the HP v3.0 for OS X printer drivers.

  If there is anything else I can help you, let me know. Thank you.