Need some advice on the replacement laptop

Similar Questions

• I need some advice for the Satellite L630/03

  Hi all

  I just bought my first Toshiba L630/037 (http://www.mytoshiba.com.au/products/notebooks/satellite/l630/psk04a-037001/specifications#details) and I'm really excited that I'm waiting to load for hours first 2 or if, after perform you a unboxing conversion it!
  He looks bloody awesome and I can't wait to start using it!

  You have a few questions:
  1. when I received it, the sticker that keeps the top down was already torn (as in a person already open).
  The clerk said that everything is fine with it, so we opened it to check that the main seal for the laptop has not been broken and that the adapter and cable was there. Now that I'm home and I have everything out, I noticed that I have no CD.
  Is that suppose to be right? I'm a bit confused because the last laptop that I bought a few of the installation CD and the drivers that came with it. In addition, is there something else I should be aware of that should have been in the box?
  All I have is the power cord, power adapter, manual, portable with battery already in it.

  2. in the purchase, there are already standard warranty 1 year that comes with the laptop. I noticed on the Toshiba site, you can buy an extended warranty. Should I buy now? Or can I get, say 1 week before the end of year 1?

  If anyone has useful tips or advice that would be greatly appreciated!

  See you soon!

  > I took everything out, I noticed that I have no CD.
  Yes, that's right. No CD is delivered pre-installed Toshiba Software is on the HARD drive and you can create a clean recovery disk! Please see the operating manual!

  > Should I buy now? Or can I get, say 1 week before the end of year 1?
  Well, as far as I know you don t need to buy the extended warranty immediately after the laptop was purchased

  I found this info:
  > Q: When can I buy the extended warranty?
  > A: the extended warranty is eligible to purchase, during the period of warranty the laptop
  http://www.MyToshiba.com.au/support/warranty/extended/FAQ

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• Need some advice on the new computer from HP.

  I bought a new HP computer and it shipped just yesterday and delivery date is Thursday (12th).  I am new to HP computers, my other 2 desktops are Dell and Toshiba laptop of my wife. Laptop is Win 7 and desktop computers are Win XP. The most recent Win XP is:

  Windows XP Professional SP3 32-bit
  Intel Core 2 CPU 6300 @ 1.86GHz
  4 GB of Ram.

  Don't laugh, my other Dell XP desktop computer is simple core!  Laughing out loud

  These 2 computers will retire after I receive and configure the HP computer:

  HP Pavilion HPE h8 desktop PC - 1360t
  Windows 7 Home Premium 64
  3rd generation Intel Core i7-3770 to processor quad-core [3.4 GHz, 8 MB of shared cache]
  10GB DDR3 1333 MHz SDRAM [3 DIMMS]
  SATA 1 TB hard drive 7200 RPM.

  Do you think I'll note and difference? (I'm kidding) Laughing out loud

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  3. the computer come with Service Pack 1 installed?

  HP Pavilion HPE h8 desktop PC - 1360t
  Win 7 x 64 ~ ~ SP1, IE11 ~ ~ FF i7 3770 3.40 GHz ~ 10 GB Ram ~ NIS 2014

  Congratulations for the excellent choice.

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  With your experience, you probably won't have a problem. I strongly support you haven't set a password on it.

  You can always add a password later.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  Configuration of the computer and do what is required to complete the user account. It is advisable to only use DVD + R media. You will probably need 3-4 DVD + R and the usual CD - R disc repair system.

  3. the computer come with Service Pack 1 installed? This date should be. There will be updates.

• I want to convert my logic large table - multiply in a library called the faster, need some advice on the code of C.

  Hello everyone,

  In my VI, I have a code that looks like this-

  

  Each table is 2D size 512 by 640.  The time it takes to run this whole chain is approximately 28miliseconds. Seems fast, but I need to cut it to about 10ms.  I tried to make the tables 1 d, but saves only about 2 ms.  I even tried to cut the table 1 d in half and duplicate the code and then combine them at the end (a half-hearted attempt at optimizing multi-core) and who showed zero improvement...

  I guess my last option (please let me know if there are other options) is to compile a DLL that will do this for me.

  I'm a bit confused on how I'm supposed to implement table multiplies in C, however.

  What I do run for(;;) a loop and multiply each item one by one?  It seems that that would be much slower than anything done LabView in-house to do this multiplication of cross-checking.

  Thank you!!

  MK

  If you don't know how you would in C, I don't know why you think that move it to a DLL will make it faster. In C, you will need to either make operations sequentially in a loop for, as you mentioned, or find a library for parallelization of this operation. There is no built-in c function to multiply the tables.

  One thing you might try in your LabVIEW code is to multiply it in a loop for, where you make an addition to each iteration and store the result in a shift register. Also remember the current power of the original array into a shift register. Which should reduce the number of copies of the table you need, which can speed up to turn the code. So, you initialize it the 'sum' with the first table shift register and the shift register current electric table with the result of the subtraction (or, Alternatively, with a table of the same size, filled with 1, according to the order in which you want to do things). Multiply this table by the first multiplier, add it to the sum, and multiply the power of the original (subtraction) table, storing to the power shift register. Repeat until you are finished.

• Need some advice on the form element values?

  Hi all

  I have a problem with the site that I am developing. Its a site of e-commerce for a memorial Masons. For each product/memorial there are several elements, menu drop-down menus and text fields to retrieve the necessary information, there is also a 'total' who, as customers make their choices, the amount of each item is added to this total. My problem is, on the two elements "engraved_designs" and "sandblasted_designs", I need to calculate this amount, but also I need to get the code of the design chosen for back-office reference. I can't use the price and code in the "value" attribute, that you stop the calculation of work function. So, how am I to get the amount to be calculated at the same time as being able to recover the chosen code when you submit the form?

  http://www.milesmemorials.com/product-GH54.html

  It's exactly the same principle.

  $engraved2 = explode (' #', $_POST ['engraved_designs2']);

  And this, in the body of the email:

  $email_body. = "engraved design: $engraved2 [1].» \n » ;

• Need some advice about the VPN between local Cisco router and remote Watchguard

  Hi all

  I am configuring a Cisco 887 to VPN router to a device of watchguard at the remote site.

  From what I understand, the VPN tunnel is in PLACE. I can ping to the remote server on the 192.168.110.0 of the network, but whenever I try to navigate to it on the local server, it wouldn't work.

  I ping the remote server via the IP address on the local server, but not on the Cisco router. Is - will this work as expected?

  --------------------------------------------------------------------------------------

  R5Router #sh crypto isakmp his

  IPv4 Crypto ISAKMP Security Association

  DST CBC conn-State id

  110.142.127.237 122.3.112.10 QM_IDLE 2045 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  --------------------------------------------------------------------------------------

  R5Router #sh encryption session

  Current state of the session crypto

  Interface: Virtual-Access2

  The session state: down

  Peer: 122.3.112.10 port 500

  FLOW IPSEC: allowed ip 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed 1 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed 6 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 122.3.112.10 192.168.0.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  Interface: Dialer0

  The session state: UP-ACTIVE

  Peer: 122.3.112.10 port 500

  IKEv1 SA: local 110.142.127.237/500 remote 122.3.112.10/500 Active

  FLOW IPSEC: allowed ip 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 2, origin: card crypto

  FLOW IPSEC: allowed 1 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed 6 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 122.3.112.10 192.168.0.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  Crypto ACL 102, should really include only 1 line, that is to say:

  10 permit ip 192.168.0.0 0.0.0.255 192.168.110.0 0.0.0.255

  and you should have the image mirror on the remote end ACL line too.

  PLS, remove the remaining lines on 102 ACL ACL.

  I guess that the ACL 101 is NAT exemption, if it is pls include "deny ip 192.168.0.0 0.0.0.255 192.168.110.0 0.0.0.255" on top of your current line "license".

  Clear the tunnels as well as the NAT translation table after the changes described above.

• [ADF, JDev12.1.3] (I need some advice on the 1) using panelHeader/box of 2) how achieve a specific layout

  Hallo,

  I create a page in which there are many 'af:form + af:table' groups (each group reads a VO istance).

  I would like to know if, in my case, I use it to group the CIU, panelBoxes or panelHeaders, and which of them would be advised.

  I would like that it is easy to install for all conatiners the same width.

  In addition, I would like to only 2 groups are always visible while others should be no in a space (just a panelGroupLayout?) with a vertical scroll bar.

  You could you kindly help me in achieving this layout?

  Thank you

  Federico

  

  PanelBox can be reduced by the user, well, can't panelHeader.

  As for scrolling, you can probably surround other sections with a panelGroupLayout and set layout = "scroll".

  Dario

• Need your advice, choose the best update for first Pro CC

  Need your advice, choose the best upgrade.

  Because nobody can have a computer that runs all functions as quickly as desired, we have manage their it resources according to your needs, budget and for the money. Below is a fundamental issue related to Adobe Premiere Pro 2015 CC.

  Need for better visualization without jerky look of a stutter and overall better performance incease.

  Would I do better with? (Choose one please)

  1. Passing of an SSD to 2 SSD in RAID 0 configuration - cost about $350.
  2. Getting my video card NVIDIA GeForce GTX 560 Ti for a NVIDIA GeForce GTX 970 overclocked to 4 GB GDDR5 graphics card - $350.
  3. From Win 7 Pro 64-bit to win 10 Pro 64-bit.

  Please explain why you made your choice.

  
  

  Thanks in advance,

  Tom
  

  Tom,

  At this point, you're pretty much stuck to a GPU upgrade. You see, that the GTX 560 Ti is not is properly supported in first Pro CC 2015 when it comes to acceleration GPU of MPE. As such, you may experience random program crashes and/or repeated which are fixed only when you disable acceleration GPU of MPE and run first in software mode only MPE.

  The other improvements are out of the question: the i7 990 X CPU uses the chipset Intel X 58 now-seven-year-old, whose native Intel SATA ports are limited to SATA II (3 GB/s or 300 MB/s) flow. All support 3 SATA or USB 3.0 on motherboards that use such an old chipset comes entirely from complement third-party chipsets to companies such as NEC/Renesas and Marvell. And we know how slow the Marvell SATA 3.0 ports work are compared with native Intel SATA 3 implementation on newer chipsets. Unfortunately, a CPU upgrade would have exceeded the maximum budget $ 350 because both the CPU and motherboard (and probably RAM as well) should be replaced by such upgrade. And additional SSD upgrades are out of the question because newer SATA SSD would have been restricted by the sustainable maximum rate of 270 MB/s of SATA II.

  Therefore, the only feasible upgrade would be a new GPU for your system now five-years.

  Good luck in your quest to upgrade,

  Randall

• Can you please give some advice on the ToolTip used in the new packaged applications

  Hello
  I use apex 4.1 theme 23.
  I would use the ToolTip used in the new packaged app.
  Can you please give some advice or the "Details" on ToolTip, used in the new packaged applications. for example: go live checklist request.
  Once we fly over "Check list items" region. We get the tootip.
  
  1. how to find the class "detailedStatusList".
  2. how to find "detailedStatusListToolTip();" JavaScript function used in "execute when Page Loads.
  3. is there a tool to generate the source in the region to "check list items.
  
  I don't know if there are more, I need to know...
  
  * the tooltip plugin isn't solid...
  
  Kind regards
  Water

  Good morning, water,

  My goal is to use it in IR for the column notes. I can't show all the notes on the report. so I use RPAD to show only the first words. and the rest should be available by using the ToolTip.

  Fact :D

  You need to use SUBSTR to restrict the notes to a few words, not RPAD.

• I changed the IR query as follows...

  select
  Deptno,
  Dname,
  Loc,
  substr(notes,1,25) || '<div class="long-notes" style="display:none;">'||notes||'