Need steps to generate the AIA Application using the Foundation Pack

Similar Questions

• No sound on my computer. Need steps to get the audio drivers, card, etc.

  First of all I am newbee: my computer has no sound.  Verified and computer says my speakers work.

  Can't hear sound on any video, can't listen to music online, cannot Skype and so on.

  Need steps to get its program which runs correctly. Please help en newbee.

  Hello

  Thanks for posting the request in the Microsoft Community.

  1 have had any changes made on the computer before the show?

  2 Windows operating system you are using?

  3. What is the brand and model of the computer?

  To resolve the problem with the sound, I suggest you to refer to the article and see if it helps:

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  If you are always faced with the question, please respond with more information, and we will be happy to help you.

  Thank you.

• need help to generate the sequence

  HII all I want to generate a sequence, but I am not able to generate
  
  the logic is that I must have values such as c11, c12... c199
  and then A1, A2, A3, A4... A9, B1... B9, C1... C9... Z9
  I WROTE AFTER THE CODE, BUT IT IS NOT WORKING CAN YOU HELP ME PLEASE
  
  

  CREATE TABLE ABC(NAME VARCHAR2(100));
  
  
       declare
        v_t varchar2(10) ;
       j number ;
       i number;
     v_t1 char := 'A';
       type t11 is table of varchar2(3000) index by binary_integer;
       t1 t11;
       begin
   execute immediate('truncate table abc');
          for n in 1..99 loop
            t1(n) := 'c1'||i;
   insert into abc values(t1(n));
    commit;
      end loop;
   loop  ---to convert
           j:=1;
           loop
                v_t := v_t1||j;
                j := j+1;---1to 9
                insert into abc values(v_t);
              commit;
               exit when j = 10;
              end loop;
       exit when ascii(v_t1) = ascii('Z') and j =9;
       v_t1 := chr(ascii(v_t1)+1);
   end loop;
     end;

  Published by: 810345 on May 19, 2011 15:51

  that's about it:

  CREATE TABLE abc (name VARCHAR2 (100));
  TRUNCATE TABLE abc; -- whenever possible never put ddl-code into a pl/sql-block
  
  DECLARE
  BEGIN
      FOR n IN 1 .. 99
      LOOP
          INSERT INTO abc
          VALUES ('C1' || n);
      END LOOP;
  
      FOR j IN ASCII('A') .. ASCII('Z')
      LOOP
          FOR k IN 1 .. 9
          LOOP
              INSERT INTO abc
              VALUES (CHR(j) || k);
          END LOOP;
      END LOOP;
      COMMIT;
  END;
  /
  

• Need help to generate the name of the variable object timeout

  Below is a function that I use for scaling an object down and then hide it. It works fine on a single object, but if I try to run it on multiple objects at the same time, only the last object gets scaled down. I think it's because the timeout list never has one in this document, "ShrinkTimeOut."
  
  Each entity in the list of timeout needs a different name? And if so, how would I dynamically generate a name and save it so I can kill the timeout once the object object has reduced completely?
  

  > It looks like I'm getting rid of the timeout properly object in my code?

  Now that you say, and I have a glance, no - this isn't:
  not sure about the order of the parameters here:
  function fShrinkLoop (mModel, aTimeout) {}
  Creates a variable that contains the value of the model vector
  scale (vector (1,0000, 1,0000 1.0000)).
  nScaleVector = mModel.getPropRef("transform").scale;
  Check if the model is 1% or less to its original size.
  If (nScaleVector [1])<=0.01)>
  The model makes it invisible.
  mModel.visibility = symbol ("none");
  Kill the timeout object.
  aTimeout.forget ();
  } else {}
  If this isn't the case, further reduce US model and allow the loop to
  Repeat steps.
  mModel.scale (0.9);
  }
  }

• Need steps prior to the stoppage of the VM Infra

  Hi friends,

  I really need your help in this area, I need that all the steps tobe taken before and after, when the full VMware Datacenter is going tobe Powered disable (Some UPS Power) I have 2 VMware Datacenter, for VMware Datacente a vCenter is only installed on a virtual computer and B data center VMware vCenter is installed on a physical server ,

  And which is important in VMware Datacenter B Cluster, HA, DRS is enabled, then how and first it as all VM I should power off and after that what ESX all I power off,

  I need the steps for this activity, you suggestion help me a lot.

  Concerning

  Riadh Gunnal

  http;//tech2solution.blogspot.com

  I agree with Idle-Jam, but I'll add the closure of the San.

  Who should go after the last host, and the tower to the top, it should be the first thing you put up and wait for the upcoming SAN.

  Also the network switches and fiber switches if you have them, should be off at this point.

  The idea is to stop all i/o, and do you that by stopping VMs.

  It will be useful.

• Need steps to uninstall the agent from 12 c

  Hello
  
  Not want to uninstall the agent of 12 c.
  Any document or the detailed steps would be useful.
  
  -Wern

  If you use the silence runInstaller uninstall the agent you will need to manually remove houses plugin like ruInstaller, to delete the dependent houses one by one.

  To avoid this, we have many more simple solution and markets - use agentdeinstal.pl script silently to delete all at once.

  1. $/perl/bin/perl /sysman/install/AgentDeinstall.pl -agentHome

  This script uses the API to eliminate all dependent homes for you and you do not have to worry about out them one after the other

  See the installation guide for more details and exact instructions - uninstalling Oracle Management Agent

• Need help in generating XML data to a table in XML format

  Hi all
  
  I need help to generate an xml file using the data below.
  
  The table name is T_Data have 4 columns as shown below with data.
  
  Neighbourhood region Division
  ---------- ----------------------- ----------- -----------
  Northwest Northern California San Jose SJStore1
  Northwest Northern California San Jose SJStore2
  Northwest North of California to the North of THE LAStore1
  Northwest North of California to the North of THE LAStore2
  Northwest North of California to the North of THE LAStore3
  
  I want to generate an XML file using SQL/XML functions and the XML file should look like as below.
  
  <>region
  < name of region > Northwest < / name of the region >
  < Division >
  Northern California < division name > < / Division name >
  District of <>
  SanJose < district name > < / District name >
  <>store
  < store name > SJStore1 < / name >
  < store name > SJStore2 < / name >
  < / store >
  < / district >
  < / division >
  < / region >
  
  Very much appreciate your help here.
  
  Thank you.

  I tried to group the lines, but they did not then provide a correct output.

  To unflatten dataset, we can use nested GROUP-BY subqueries.

  The following will produce a line by region.
  If all regions must be grouped in a single root element (does not so appear according to the directives of the sample), we just add an another XMLAgg.

  SQL> with sample_data as
    2  (
    3    select 'Northwest' reg, 'Northern California' div, 'San Jose' district, 'SJStore1' st from dual union all
    4    select 'Northwest' reg, 'Northern California' div, 'San Jose' district, 'SJStore2' st from dual union all
    5    select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore1' st from dual union all
    6    select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore2' st from dual union all
    7    select 'Northwest' reg, 'Northern California' div, 'North LA' district, 'LAStore3' st from dual
    8  )
    9  select reg
   10       , xmlserialize(document
   11           xmlelement("Region"
   12           , xmlelement("RegionName", reg)
   13           , xmlagg( division_xml )
   14           )
   15           indent -- for display purpose
   16         ) as region_xml
   17  from (
   18      select reg
   19           , xmlelement("Division"
   20             , xmlelement("DivisionName", div)
   21             , xmlagg( district_xml )
   22             ) as division_xml
   23      from (
   24          select reg
   25               , div
   26               , xmlelement("District"
   27                 , xmlelement("DistrictName", district)
   28                 , xmlelement("Store"
   29                   , xmlagg(
   30                       xmlelement("StoreName", st)
   31                     )
   32                   )
   33                 ) as district_xml
   34          from sample_data
   35          group by reg
   36                 , div
   37                 , district
   38      )
   39      group by reg, div
   40  )
   41  group by reg ;
  
  REG       REGION_XML
  --------- --------------------------------------------------------------------------------
  Northwest 
              Northwest
              
                Northern California
                
                  North LA
                  
                    LAStore1
                    LAStore3
                    LAStore2
                  
                
                
                  San Jose
                  
                    SJStore1
                    SJStore2
                  
                
              
            
   
  

• SQL to generate the last weeks date (not a stored procedure)

  I need SQL to generate the last dates of weeks from Monday to Sunday. I don't want to use the data in the table or the stored procedure. I need inline SQL. Please help me with your suggestions. Thanks in advance for the help.

  Varun says:
  I need SQL to generate the last dates of weeks from Monday to Sunday. I don't want to use the data in the table or the stored procedure. I need inline SQL. Please help me with your suggestions. Thanks in advance for the help.

  below should help you get started

    1* SELECT SYSDATE-LEVEL from dual CONNECT BY LEVEL < 8
  SQL> /
  
  SYSDATE-L
  ---------
  21-APR-13
  20-APR-13
  19-APR-13
  18-APR-13
  17-APR-13
  16-APR-13
  15-APR-13
  
  7 rows selected.
  

• I can't download the Service Pack 2 because it keeps saying that I have not downloaded sp1?

  After a day of the sp2 download, it is finally over. Here is the problem.

  Run the sp2 > welcome to sp2 > license > you need to install windows vista service pack 1
  I really need help here. I am clearly using windows service pack 1, and my computer is windows Vista.

  Make sure that SP1 is installed really

  Click the Start button, right-click computer, and then click Properties.

  See if Service Pack 1 is listed in the Windows edition section

• I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  I'm following the steps described in the version beta to build the application of 'Launch' test, but the tool of signed digital app has no ios tab when I go to the for use. Is this a bug or am I missing something?

  Note that iOS signature is only available on Mac. If you're on a Windows machine, you won't see the iOS tab.

  Neil

• I've upgraded to Pack Adobe. Need a refund for the Adobe Reader application. Should what steps I take to get a refund.

  To whom it may concern,

  Could pay you please 23,88 dollars on my account of google wallet. I bought the Adobe Pack instead of just the application of a device.

  Thank you

  Lorrie Heichelbech

  Hello

  You bought Adobe Document Cloud subscription service online (Pack of Adobe PDF, Adobe Acrobat Pro DC) with Acrobat Reader for Android?

  What exactly is the name of the application or service you bought?  Check you your receipt for that knowledge?  (AFAIK, there no app/service called "Adobe Bundle".)

  Here are the links that you may find useful.

  Cancel your subscription or membership. Acrobat, services Cloud of Document PDF

  Contact the customer service

  This is a user forum.  We are not able to deal with all requests for cancellation of subscription or renewal.  Sorry for the inconvenience.

• Need administrator rights for the Intel on Satellite Pro 2100 speed step

  Hello
  I have a Satellite PRO 2100 (Pentium 4 1.9 GHz).
  I have a problem with the function of the Intel speed step, which reduces the speed of the processor at 1.2 GHz. But I have a problem: I can do this, if I use an administrator account...
  After starting, if I connect with a simple user account, the Intel speed step works... and the speed of the cpu remains at 1.9 GHz.
  So I would like to use this function with a simple user account, how do I do it please?

  Thanks for your help :)

  Hello

  As far as I know that this application is not shipped with the image of Toshiba and it s not made not part of the image.
  But I put t see any big problems. You will need to change your account administrator rights. In this case, you will need to ask someone the admin right to edit your account.

  The other possibility is to change the law for this software. There can be changes as by admin. What you can change in the Security tab in the program properties. Full control must be set to all.

  Then, it should be possible to use this application with your account.

• Change the sequence of commands to generate two reports by USE with different names.

  I have a special situation for the model of batch processing.

  Each DUT consist of two distinct products that need to be tested as a single unit.

  I can run every USE and generate a test for each report.  -aka. The standard use case works very well.

  However, we would like the records using this method. So I need a copy with a different name for each series.

  The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.

  I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.

  

  I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.

  All links to the relevant information would be useful. Thank you

  Just copy these two steps and between them and the copies have another step that is just a statement.  There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.

  Ideally what you would do, is that the client using a callback.  So, your code would look like this:

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Define report path reminder (override in customer OR statement step)

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Hope this helps,

• Hi need help I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Hi, I need help, I get the error message "Download error, Undefined" in the applications tab to install Apps. Can someone help?

  Follow the procedure below and check:

  
  

  End Adobe partner all tasks in the Manager of tasks like creative cloud, CoreSync, AAMUpdater... etc.
  

  Uninstall Adobe Creative Cloud application.

  If you face any problem try CC Uninstaller:

  Using creative cloud | Uninstall the creative cloud desktop application

  After removing Adobe Creative Cloud applications, follow these steps:

  Step 1:

  Open the c: drive and navigate to C:\Program Files (x 86)------\Adobe " common files".

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Step 2:

  Navigate to C:\Program Files (x 86) \Adobe.

  Open Adobe file and if present the file to remove Adobe Creative Cloud . [* important]

  Impossible to remove?

  Rename it as Adobe Creative Cloud-old.

  Step 3:

  Press Windows button (located between Ctrl and Alt buttons) with the key R together at once, you will get a command window.

  Type below command and press the enter"" key.

  AppData

  Then go to the Local > Adobe.

  Open the Adobe folder and delete folders named AAMUpdater and OOBE.

  
  

  Step 4:

  Temporarily disable anti-virus and firewall.

  
  

  (1) open Control Panel and then click on the network and Internet"" option.

  2) click on Internet options, click on the tab "connections".

  (3) in the 'Connections' tab, select 'LAN' settings, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  5) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 5:

  Make sure that Adobe Creative Cloud is not listed in the control panel > programs and features. list.

  Then, download and install the Adobe Creative Cloud app and check.

  https://ccmdls.adobe.com/AdobeProducts/KCCC/1/Win32/CreativeCloudSet-up.exe

• need me an Adobe license to generate unique PDF files using iText 2.17?

  Hello

  
  

  We are building a web business application using iText v2.1.7 (Apache 2.0 under a free license) which generates unique PDF files, containing a dozen of text to fill in fields. Each PDF files are different by using multiple text labels, ensuring uniqueness.

  Each instance of the PDF file is sent to a single recipient, the recipient fills text fields, print the document and signs the document.

  Subsequently, the paper is placed in a workflow outside of our company. This workflow produces a unique XML file that is sent to our internal workflow.

  My question is: do we need to license Adobe Acrobat Reader, and that is the license appropriate for us?

  
  

  Thank you!
  

  You do not use any Adobe technology. Adobe do not claim that all rights to the PDF generators that do not use their technology - PDF is a public ISO standard.

  In fact, the use of Acrobat Reader and Acrobat is prohibited on a web server, but fortunately it does not apply because you don't need.

  Your end users will need Acrobat or Acrobat Reader or another PDF reader. But the licensing of your software to end users is their own interest (unless you manage their business, in which case you may need a license for the redistribution of the reader).

  However, although it is off topic, I can't really recommend basing a business on the old iText 2 just application because it's free. See Sales FAQ | iText Software, "WHY I shouldn't USE ITEXT 2.X (OR ITEXTSHARP 4.X)?". It could be the weak link in your solution, and you would have yourself locked out of commercial support.