Need to buy the optical drive for M100 - problem accersories

Similar Questions

• Need suggestion about the optical drive for Satellite 5100 503

  Hello
  I have a little trouble with CD-RW/DVD for Toshiba Satellite 5100 503 drive. He writes about 1/5 CD - r and only if I write< 400mb="" of="" data.="" i="" tried="" cleaning="" the="" lens="" -="" no="" help.="" tried="" both="" win="" xp="" writing="" software="" and="" nero="" -="" no="">
  Do you know if I can replace the drive for a DVD burner? And if yes - which model?

  Hi Piotr,

  You can replace your new CD burner with vurtually any DVD burner that is the same physical size, but you should make sure that the new Recorder has a set-up similar to your current drive configuration.

  In general, the reader will be configured as Master, Slave and Cable Select (Csel), by the manufacturer and must match the configuration of your current player. One of the tools of Nero will show you the current drive configuration.

  Unfortunately, most retailers do not show configuration and with slim-line readers, there is no DIP switch that allows you to change it.

  Kind regards

• I have a HP G71 model #G71-329WM. I need to replace the optical drive. What is the part number?

  My HP G71 model #G71-329WM will not load a CD or DVD so I need to replace the optical drive. What is the correct part number? Thank you

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c01713747.PDF

  Replacement of optical discs with reference numbers HP are in Chapter 3, page 33.

  You can also read the instructions in Chapter 4 on removing the drive and get the number off of it, which is normally on a white sticker.  A reference to 6 digit-3 digit number (123456-001)

  You can search by the number of coin on eBay for a used camera but work or you can probably buy a new one at HP by entering the part number on the link below.

  http://h20141.www2.HP.com/hpparts/default.aspx?mscssid=6287767FBDD34F3696CF3D0837BDBC96

  Paul

• HP Pavilion 15-e073ca: 2nd HARD drive cart, replace the optical drive for HP Pavilion e073ca 15 Notebook PC &amp; Windows 10

  Hello!

  I intend to add an SSD in my two years 15-e073ca HP Pavilion Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.

  In other words, there is my plan:

  1 remove the real disk HDD hard bay and replace it with the new SSD.

  2. remove the optical drive and replace it with the adapter caddy containing my old HDD.

  3. do a clean install of Windows 10 on the SSD, using a recovery USB stick made with my system Windows 10 real (which has been updated from Windows 8.1).

  I plan to purchase the following parts:

  1 - a HDD / SSD cart adapter for HP Pavilion 15 (model OBHD9-SATA-SATA-BU9), of NewmodeUS (http://www.newmodeus.com/shop/index.php?main_page=product_info&cPath=2_5&products_id=583)

  2 - a SSD 128 GB (article SDSSDHP - 128G), SanDisk (http://www.sandisk.com/products/ssd/sata/ultra-plus/?capacity=128gb)

  I have a few questions before I buy parts:

  1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?

  2 - the height of the SSD is 7mm, and it seems that my old HDD is 9.5 mm in height (model WDC WD10JPVT-60A1YT0). It would cause no problem (I need to add spacers)?

  3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?

  4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.

  Thanks in advance for your answers.

  Haghe

  Your plan is perfect. The SSD to will of 7 mm that always come back fine it just will be lower in the caddy. The holes and SATA connections are in the same place as a hard drive of 9.5 mm. You can use a spacer (many SSD include one in the box) but not really necessary.

  Installing SSD for Windows 10 the way you expect is not really "own", that he will again introduce files and programs, in my opinion and certainly drivers. Whatever it is, it works perfectly and activates the old installation has been enabled.

  The hard disk in the optical adapter will not be bootable and will transfer the data a bit slower than a drive in the main compartment, but will still be usable for most cases. If you need fast input/output like Photoshop or video editing move the job file to the first SSD. Alternatively, you may wish to consider documents and photos and other migration on the HARD drive to keep the 128 GB SSD to fill. You can right-click on these files and select 'place' and move them. After the back if you need some help with that.

  Enjoy.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• How to change the optical drive for Portege R500-135

  Hello

  I need to change my optical drive, but I don't kown where I can buy one.
  My laptop is PPR50E-08M046FR.

  THX

  Rgds

  Hello

  As far as I know it of not easy to replace the STRANGE because it s hidden under the bottom cover, this cover should be removed first to access the CD/DVD drive, HARD drive, etc.
  But I found a useful page:
  [Portege R500 | http://www.irisvista.com/tech/laptops/Toshiba-Portege-R500/disassemble-laptop-remove-hard-drive.htm]

  But note; everything you do it your own risk you Lady laptop parts. Be always careful and don t use force

• HP Pavilion 15-p263nl: 2nd HARD drive cart, replace the optical drive for HP Pavilion p263nl 15 Notebook PC &amp; Windows 10

  Hi all!

  I intend to add an SSD for my HP Pavilion p263nl-15 Notebook PC. I found some sites that I can remove the optical drive and put a second drive using a caddy adapter in the optical drive Bay. I found that some people on the forum did it successfully, but nothing on my PC model. I want to know if he could work with my product.

  In other words, there is my plan:

  1 remove the real disk HDD hard bay and replace it with the new SSD.

  2. remove the optical drive and replace it with the adapter caddy containing my old HDD.

  3. do a clean install of Windows 10 on the SSD using a USB key recovery made with my real Windows 10 system (which has been updated from Windows 8.1 July 2016).

  I already have a 120 GB OCZ SSD (OCZ Vertex 3).

  I have a few questions before buying the adapter:

  1 - the two drives (my old HDD and the new SSD) are recognized by the motherboard / BIOS and the operating system (Windows, 10)? Is there a limit to a unique HARD/SSD disk drive on the computer?

  2 should. What size the card be? I found offers for 9.5 mm and 12.7 mm that are supposed to be suitable for HP Pavilion in general

  3 - these parts work together and with my computer (size, compatibility)? You can expect any problems with this upgrade?

  4 - clean install Windows 10 quote, because I intend to install it on a different drive than the one I used to create the key USB recovery flash? I have never done a clean install of Windows before.

  Thanks in advance for your answers.

  Alessandro

  p.s. in this section of the forum (where I took most of the post), the solution worked almost perfectly, but it's a different product of the Pavilion 15 ^^

  Hello

  1. Yes,

  2. your machines use 9.5 mm SATA Tray,

  3 problem? I can't answer this question because who knows nothing until the track.

  4. I don't know how you create USB recovery but a good new installation should work.

  Kind regards.

• where can I buy an optical drive for lenovo Y450

  Please tell me where I can buy a new optical drive for lenovo Y450. my laptop can't not open/read CD, but it works on DVD. Why? can someone tell me the solution for this? TNX in advance

  
  

• I need to replace the hard drive for a campaq presario v5000 laptop

  having trouble with the laptop is very slow or freezing upwards.  Had he wiped and all the info on it but did not help the cause.  Message has started to come up on top of the hard drive and then it just stopped working.  My daughter who works in the field of Informatics said I need a new hard drive.  So now I need to know what parts I need to buy

  Just a new hard drive.

  

  Above is the image of the Bay on the lower part of the lasptop where the player will. You need an old drive portable PATA (IDE) model. Remove the drive from the caddy and replace it with a new one, new plug-in and recharge your software and you're good to go.

  Here's a disc that will work for you to newegg.com:

  http://www.Newegg.com/product/product.aspx?item=N82E16822152110

• need to buy the product key for window xp...

  need to buy windows xp product... old one key put on this computer was made by massive keys and is blocked by microsoft. How can I get a new product key?

  You computer does have a COA sticker on it?

  If so, what version and edition of Windows is valid?

  IF it's for the same edition of Windows is already installed (probably XP Pro) and then try to use the product key update tool to change the key to that on the sticker.

  http://Windows.Microsoft.com/en-GB/Windows/help/genuine/product-key

  You may be able to get a set of recovery discs for the machine to the manufacturer, at a reasonable price - check out their website.

  otherwise, thanks for posting a report MGADiag, and we may be able to help

  To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
  Once saved, run the tool.
  Click on the button continue, which will produce the report.
  To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
  -* in your own thread *, please

  Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
   http://www.Microsoft.com/howtotell/content.aspx?PG=COA

• need to find the printer driver for HP deskjet D2460 series...

  need help to find a printer driver for my HP DESKJET D2460 series... have no original disk...

  Surely you would visit the HP website > support > downloads for your specific model

• Need to update the display driver for Equium L20

  Hi all

  Just upgraded to Windows 7 on my Equium L20, I need to update my video card driver but can't find where do.

  Any help would be greatly appreciated.

  Thank you

  Ryan

  Hi Ryan

  Your satellite is supported for Win7?
  As I can see on the Toshiba support page this old notebook is not supported for Win7.

• Old laptop - Pro 490 - need help with the graphics driver for Win 98

  I downloaded the display drivers, but these seem to be the same ones that Windows 98 is installed but the screen is not 'full' but just a window in the middle of the screen.

  I have also 1 device that does not have a pilot.

  Is someone can you please tell me where I can get a set of drivers for the laptop? Win98SE drivers seem to be a little short on the toshiba web site (unless I'm blind)

  Otherwise I'll have to use the recovery CD to install windows 95 and then upgrade to windows 98... do not look forward to that.

  Any help greatly appreciated

  Hello

  In my view, the drivers for Win98 and Win 98SE are the same.
  But this unit is very old and Toshiba doesn't conceive these drivers more.
  I suggest to look on the sites of manufacturers of equipment. Maybe you'll find some drivers for Win98

  Concerning

• Need to install the latest driver for Huawei EM680 w / Gobi technology

  but could not find the driver

  Hi Ikklc8888! You have a problem with your Sony product? Please provide details. Thank you.

• put the HARD drive in the optical drive stock

  Hi all

  I'm sorry if this is redundant, but I couldn't find the answer to any where or through telephone Support from Lenovo.

  I received the W530 with stock 500 GB HARD drive, but I want to replace it with the Pro of 840 Samsung SSD and put the HARD drive in the optical drive. I just restore the image from HARD disc for my SSD orginal (now in the original HARD drive box).

  At first I thought that I just leave the HARD drive in the original Bay and use the optical drive for the SSD, but since I use the SSD for the OS, and I want to use the DVD player sometimes, I thought I should put the SSD in original HDD bay and the HARD disk in the optical drive.

  I'm sure I've read that a lot of people did it with success, but I do not know much about computers and have never done nothing wise hardwear. I tried to put the HARD drive in the caddy Newmode U.S. optical drive, but it wouldn't fit (the screw on the caddy heads are too big). I think it's because the HARD drive still has the metal casing on it. I am worried, however, that if I remove the caddy, it voids my warranty, and above all, I am wanting to make sure it is the correct and safe way to the stock HARD drive in the optical drive.

  I put the rails HARD original on the SSD drive rubber because it is in which Bay but you have no other rails to the HARD drive in the case of the optical drive, and I don't even think he would fit in.

  So, it's OK to remove the carriage on the stock of HARD drive and put it in the optical drive without any kind of rails or protection (but attach it to the optical drive with the supplied screws caddy)? I think that's what I have to do anyway with the SSd, if she had to go into the optical drive.

  I am also an upgrade of RAM, but the keyboard under the bottom access RAM screw is stripped, so I can't remove the original RAM (it is under keyboard) and use the optimal 0 and DIMM slot installation 1. Any ideas?

  Thanks for your time, and once again, sorry if this is very basic.

  Change hard drives and memory do not void the warranty.

  The DSS must be installed exactly as the original HARD drive was, with rails caddy and rubber.

  The HARD drive in DVD case must be inserted with the 4 screws with the caddy, nothing else.

  To remove the stripped screw, you must use the small (jeweller preference) needle clamp with extreme caution, or slowly drop the screw head to create a new location. The second option is more dangerous because it produces small deposits of metal. If you can't do it yourself, ajeweller could do this easily for you.

  Good luck!

• I need the part number of optical drive for my new Aspire E5-573-5653.

  I need the optical drive part number for my new Aspire E5-573-5653, I bought it for my son without realizing he did not have. I would buy it and install it. Thank you.

  I contacted Acer technician. I hope it can help you (not the same Department).

  I understand your frustration... we don't have this problem in Europe.

  I'm not an employee of Acer. I'm just a volunteer / member.