Need to change letter color object to lines

Similar Questions

• Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Please help :)

  Hello, a graphic designer created my logo. I need to change the color from black to white and then make it bigger so I can add it to a T-shirt. I looked online and can't find a way to do it. Help, please

  Guess that's your logo. His place of 1000px

  

  Select each layer, and then type cmd - I or ctrl-I on the keyboard and that will reverse the color of the objects on the layer. Black is the

  opposite of white

  

  And then resizing the image size under Select image menu and place values expanded in the dialog box

  as below.

  

  That's all. It may be useful

  Terri

• Need to change the color of flight hover/mouseover on flash file - HELP!

  Hello world

  I am doing a project for work and need to change the color on this file I purchased from iStockPhoto. It's a flash world map file, which highlights the countries you select Green. I just want to change it so that all the highlights are made in red instead, but no am not a flash developer so don't know how to do it. I used flash briefly before for minor changes, but can't seem to find the answer anywhere. I tried Googling it... etc!

  This is the file that I bought.

  http://www.iStockphoto.com/file_closeup.php?id=2788655

  Any ideas would be MUCH appreciated!

  I took a glance at the file you sent. This file was made some time in an older version of Flash. I'm guessing that version 6. The Actionscript code in the movie is AS2. The file is in the scenes and consists of buttons, a lot, a lot, buttons. If you open the movie library, you will see a very long list of items that are used in the film. The first point, Afghanistan, for example is a single country. If you open this button in the editor, you will see there two executives, above. Each country drawing in each of these frameworks is composed of a group. That's why he shows an overview rather than the country in color.

  To change the color for the rollover State:

  1. go to section in addition to a single country.

  2. choose Select all from the Edit menu, or use the keyboard shortcut.

  3. choose a jump outside of the Edit Menu. This will separate each item in the group.

  4. use the selection tool to select the sketch.

  5. in the toolbar, select a new color line and filling for this country.

  Repeat if necessary. Save often. Work of a duplicate of the original film, just in case.

  Simply re-color of each country, the continents are made up of the country.

  I hope you have a lot of time, it will be horribly tedious.

• Change the color of the line select in richeTableau

  Hello.. where is the default skin file? I need to change the color of the selected line in the richeTableau for JDEVELOPER 11 g...

  Hello

  you do not change the default skin file. You can create a skin as explained in the web developer's guide, and extend rich blafplus. Then you look at skinning documentation which is posted on otn to find the skin selector to change. And voila.

  http://www.Oracle.com/technology/products/ADF/adffaces/11/doc/skin-selectors.html

  Frank

• Change the color of the lines of Mac PE 3.0/text layers?

  I have a picture in the background layer to which I've added lines and text in several layers. I want to change the color of the lines and text without having to change each layer individually. Is it possible to do this in Macintosh PE 3.0?

  If the text of text layers you can link text and layers with one of the linked text layers selected in the layers palette

  the tool selected text, press the SHIFT key and choose your color in the options toolbar.

  Are the lines of the shape layers or layer pixelated?

• Change of color of the lines in the chart

  Well, it is a stupid question, but how do I change the color of the lines in a chart?
  
  
  
  

  "spacehog" wrote in message
  News:g81g1a$EQ4$1@forums. Macromedia.com...
  > Ok this is a stupid question, but how do I change the color of the lines in a
  > line
  > chart?

  http://www.rphelan.com/2008/05/23/taking-control-of-Flex-charting-styles/

• Hi, need to change the color of line at run time

  Hi all
  
  I have columns in the paintings is one of them for YES and it is of TYPE I create two attribute for this and place like this to trigger post_query block-level after that I get what I want the color of the YES and NO, but
  NOW I NEED TO CHANGE THE LINE COLOR IN FULL WHAT IT TAKES PLEASE GUIDE
  
  IF: ORDER_TRACKER2. TYPE = "YES" THEN
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ON THE OTHER
  SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.) TYPE ', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  
  Thanks and greetings
  Vikas Singhal

  IF :ORDER_TRACKER2.TYPE = 'YES' THEN
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_NO');
  ELSE
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.TYPE', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM1', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM2', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM3', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM4', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
    SET_ITEM_INSTANCE_PROPERTY ('ORDER_TRACKER2.ITEM5', CURRENT_RECORD, VISUAL_ATTRIBUTE, 'ATT_YES');
  END IF;
  

• change the color of the line in a diagram 3D with points - e3DShapePoints

  How can I change the color of line in a type of diagram of e3DShapePoints? I want to use one of the global predefined palettes.

  I managed to change the color of line of brand via:

  Report.Sheets.Item (MySheetName). Objects.Item (MyDiagramName). Curves3D.item (MyCurveName). Shape.Settings.Marker.Line.Color.ColorIndex = eColorIndexGlobalColorPalette3

  but this will not have the legend color unfortunately. Apparently there is no object available within the parameters of the curve line.

  Any suggestions?

  If you cange the color in the definition of the curve of dialogue for 'points' this corresponds to the 'points' textcolor because no line is available. (oMyShape.Extensions.Label.Font.Color.ColorIndex = eColorIndexGlobalColorPalette1)

  Dim oMy3DAxisSystem, oMy3DCurve, oMyPos, oMyShape
  
  Call Report.NewLayout)
  
  Call Data.Root.Clear)
  
  Call DataFileLoad (DataReadPath & "Report_Data.tdm", "CT","" ")
  
  Set oMy3DAxisSystem = Report.ActiveSheet.Objects.Add (eReportObject3DAxisSystem, "My3DAxisSystem")
  
  Set oMyPos = oMy3DAxisSystem.Position.ByCoordinate
  
  oMyPos.X1 = 20
  
  oMyPos.X2 = 80
  
  oMyPos.Y1 = 20
  
  oMyPos.Y2 = 80
  
  Set oMy3DCurve = oMy3DAxisSystem.Curves3D.Add (e3DShapePoints, "MyNew3DCurve")
  
  Set oMyShape = oMy3DCurve.Shape
  
  oMyShape.DataStructure = e3DDataStructureMatrix
  
  oMyShape.XChannel.Reference = "[2] / [1].
  
  oMyShape.YChannel.Reference = "[2] / [2].
  
  oMyShape.ZChannel.Reference = "[2] / [3].
  
  oMyShape.Settings.Marker.Type = eMarkerCircle
  
  oMyShape.Settings.Marker.Filling.UseCurveColor = True
  
  Call oMyShape.Settings.Marker.Filling.SetPredefinedColor (ePredefinedColorred)
  
  oMyShape.Extensions.Label.Font.Color.ColorIndex = eColorIndexGlobalColorPalette1
  
  ' oMyShape.Settings.Marker.Line.UseCurveColor = True
  
  ' oMyShape.Settings.Marker.Line.Color.ColorIndex = eColorIndexGreen
  
  ' oMyShape.Settings.Marker.Filling.UseCurveColor = True
  
  ' oMyShape.Settings.Marker.Filling.ColorIndex = eColorIndexblack
  
  oMy3DAxisSystem.ColorLegend.Visible = True
  Call Report.Refresh)

  It's a little confusing.

  Hope this helps

  Winfried

• Change the color of the lines of demarcation line tool?

  I would like to change the color of the tool of line from red to blue.  I could do it on an older version of Acrobat reader.  How can I do here?

  Hi ee68311412,

  You can simply right click on the shape/line prints once & select Properties, you will have the ability to change color.

  Kind regards

  Nicos

• Need to change the color of the model

  I realized a customer to a model site and they chose a model that has been a PSD (attached) and I turned into a working site. Now, they say they want it to be blue instead of green it is. I don't know where to start. I guess I need to go to each layer and change the color of a variant of blue. Is there a quick way to do it? I don't know yet how to change colors. Any help would be greatly appreciated.

  Thank you!

  You don't need to do this for each layer. Only those with the color of the Web page elements and only those that are visible. (eyeball on in the layers panel)

  When you select the layer, and then you go to the Image menu, settings and select Variations. You can interactively experiment until you find what's best.

  My layer thumbnails are large so I can see at a glance what I look at. Use the layers panel menu to display Options Panel and select large thumbnails.

  Of course save this model before loading in the PS, in case you should do more.

  That should help you get started.

• I need to change the color of my vector symbol

  I bought a vector drawing on Adobe Stock Photo, it's the number #64483594

  How coulkd change its color?

  Thanks for your help!

  Tiziano

  tizianoradice,

  a quick way:

  • Open the file in Illustrator
  • Select the all yellow-white ornament
  • Press [R] / / Rotate tool
  • Press [Enter]

  --> 60 °

  -->, click on Preview in

  --> Press the [Copy] button

  (Maybe you have to arrange the duplicate)

  If the construction is ok:

  • Select the ornament set yellow-white (original and copy)
  • and merge with pathfinder (add)

  Have fun

• Need to change the color of a dark black blue file

  I need help in the conversion of a file of a blue color with an intense black. Black rich meaning 40 c, 30 m, 30y, 100 k in the darker areas and the rest of the file must have a neutral gray balance. It would be easy if it was just a solid background, but the file I provided has a star on the middle of it. I think it can be done with the mixer layers or hue/saturation, but my efforts have not produced the file exactly as required. This is a jpg of the attached file. Any help would be greatly appreciated.

  

  1 convert the file in Lab Mode and zero a and b channels to produce a monochromatic image without sacrificing the details.

  2. now convert to grayscale. It will look like this.

  

  Choose Edition > color settings > CMYK > customized, choose gray Componeent replacement (GCR) and change the black generation heavy. Note that now the Gray ramp shows curves similar to your goal.

  

  Now, choose Mode > Mode CMYK color to shades of gray in this change CMYK

  Go to curves, choose the darkest black area in the image, mark.

  The values would be present as follows in the Info Panel. Notice they are cries of aim you values remotely.

  

  Adjust the point on the curve in each of the CMYK channels to match your points of view, as shown below

  

  Note that we now have the values of your target and the image looks like this:

  

  Last return, use your black generation assigning one you normally.

  One final note: Although your screen might not reflect a difference, I suggest you talk about your lithographer values that you have chosen. They add up to 200% solid which you can choose to increase to an even richer black (if the paper supports all).

• Please need to change letter u recvd credit card number

  Credit card number Ive changed due to recd letter from u.

  Credit card number Ive changed due to recd letter from u.

  Huh?

• Need help change fill color for checkbox to verify / unchecked

  Is it possible to change the fill color of a checkbox to a different color when someone check?

  Right now I have a check mark as X, but I was invited to see if we can also change the fill color when it is toggled checked/unchecked.

  I played with a few scripts, but nothing I tried works (and I'm super green to Javascript).

  Sure. In the event mouse to the top of a box to check, do something like:

  // Mouse Up script for check box
  if (event.target.value === "Off") {
      event.target.fillColor = color.red;
  } else {
      event.target.fillColor = color.green;
  }
  

  This can be simplified to just:

  event.target.fillColor = event.target.value === "Off" ? color.red : color.green;
  

• I need to know how to change the color of an image.

  I'm not a designer and do not pretend to be. Someone made a logo for me and gave me in photoshop. But I need to change the color of the logo. I bought the creative cloud and watched tutorials for days. I used the Replace Color tool and get out of there, but not really. Help, please. :/

  Hi Rachel, if you have the file have you can edit it directly in its native software that is Adobe Illustrator.
  To change the color to do the following.

  (1) open the file in Adobe Illustrator
  (2) once opened, select the white (or black) arrow tool in the upper left corner of the screen and click on the green lines. 90% this will select the entire line.
  (3) now, look at the bottom of the tools Panel on the left side of the screen, there are two colors. One is for the fill color and one for the color of the outline. One of these two is probably green. If so, double click it and choose the color you want. Click ok in the color Panel and you're done.
  (4) do the same thing on each side of the logo.

  There is a chance, the designer of the whole logo in groups. If this is the case (you will notice because you will not be able to select only the lines), take the black arrow tool and double click on the logo, until you'll be able to simply select the lines.

  Please let me know if it was clear and that you succeed.
  Kind regards

  Martin Benes
  Adobe Acp