Similar Questions

• ProLiant ML150 Gen9: Proliant ML150 G9 lost BIOS administrator Passwod

  I put an administrator password to UEFI on the server, without installing any operating system, but I've lost and I don't know how to reset the password.

  I deleted two times the NVRAM with the switch of maintenance within the Council, I remove the battery, cmos, but nothing happened, resets the configuration of UEFI, but the password is still there.

  ¿Anyone don't know what to do or what I can try?

  Thanks in advance

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - ML servers section.

  http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vm2JemZIi9I

• ESXi on HP Proliant ML150 G3

  Buongiorno a tutti.

  HO a disposizione UN HP Proliant ML150 g3 con processore Intel Xeon 5110 a 1600 Mhz with 3 Gb di memoria ram. Avevo intended di photos UN esperienza di virtualizzazione installando ESXi, magari prevedendo UN upgrade dell'hardware. The obbiettivo e di virtualizzare massimo 5 VM con so Linux o Win2003 Server. Che cosa don't think? Molte grazie.

  Ciao,.

  "con unfortunately he tuo hai server a po' di problemi: l ' ML150 G3 non e ' in HCL (lo sono solo I have G6 http://www.vmware.com/resources/compatibility/search.php) by cui will avere problemi gia' in fase di film. Oltretutto non being in HCL would not be comunque supportato poi.

  A parte questo (e to TR riesce ad installare ESXi) by take familiarita' e by some bell'esperimento Può fare' andare, my ti not everything grown prestazioni: UN bicoeur e/3 GB di ram per 5 VM sound pochini (penso in particular al Win2003 e che' ERAP ' esoso di risorse, I have Linux you can ' tenerli a bada "meglio).

  Not very ' a server you can use in produzione che.

  Se by server upgrade dell 'hardware intendi take piu' potentialit, e' very strada migliore: verification sempre che siano in HCL prima dell' price.

  Ciao

  Giuseppe

• Problem with migration SQL Server Oracle 11.2 2012 DB using SQL Developer Migration workbench

  Hello

  I have a problem when migrating SQL Server Oracle 11.2 2012 using SQL Developer Migration workbench, hope that someone had the same problem before and can give same advide...

  I use SQL Developer Version 4.0.1.14 and Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0. and last jtds - 1.3.

  I created the schema migration_repo, privileges, connected to the third part of Db (SQL Server) and begin a trial with assistant. In the first step of the model to Capture, I get the message from the:

  "Company Capture Capture failed.  Refer to the table MIGRLOG in the repository for more details ".

  But MIGRLOG is empty.

  Here is my log:

  <? XML version = "1.0" encoding = "windows-1252" standalone = 'no '? >

  < Log >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  < level > SEVERE < / level >

  oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil < class > < / class >

  < message > Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doOnlineEnterpriseCapture(FullMigrateTask.java:758) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doCapture(FullMigrateTask.java:601) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:400) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:314) < param > < / param >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:147) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193) < param > < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ (RaptorTaskManager.java:554) < param > RaptorFutureTask.run < / param >

  java.util.concurrent.Executors$ (Executors.java:471) < param > RunnableAdapter.call < / param >

  java.util.concurrent.FutureTask.run(FutureTask.java:262) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1145) < param > < / param >

  java.util.concurrent.ThreadPoolExecutor$ Worker.run (ThreadPoolExecutor.java:615) < param > < / param >

  java.lang.Thread.run(Thread.java:744) < param > < / param >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@68e69a < param > < / param >

  < exception >

  < message > oracle.dbtools.migration.workbench.core.ui.FullMigrateTask$ FullMigrateTaskException: Capture

  Capture Enterprise

  Capture failure.  Refer to the MIGRLOG table in the repository for more details < / message >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 758 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 601 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  line 400 > of < < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 314 < / line >

  < / framework >

  < frame >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  < line > 147 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTask < class > < / class >

  < line > 193 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$ RaptorFutureTask < class > < / class >

  < line > 554 < / line >

  < / framework >

  < frame >

  java.util.concurrent.Executors$ RunnableAdapter < class > < / class >

  < line > 471 < / line >

  < / framework >

  < frame >

  java.util.concurrent.FutureTask < class > < / class >

  < line > 262 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor < class > < / class >

  < line > 1145 < / line >

  < / framework >

  < frame >

  java.util.concurrent.ThreadPoolExecutor$ Worker < class > < / class >

  < line > 615 < / line >

  < / framework >

  < frame >

  java.lang.Thread < class > < / class >

  < line > 744 < / line >

  < / framework >

  < / exception >

  < / recording >

  account <>

  < date > 2014-03-16T 20: 49:17 < / date >

  oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle < recorder > < / recorder >

  WARNING < level > < / level >

  oracle.dbtools.migration.workbench.core.ui.FullMigrateTask < class > < / class >

  <>error message: ORA-06550: line 1, column 14:

  PLS-00201: identifier ' SS2K5ALLPLATFORM. STAGECAPTURE' must be declared

  ORA-06550: line 1, column 7:

  PL/SQL: Statement ignored

  : FAILED: Database Migration: FAILURE < / message >

  oracle.dbtools.migration.workbench.core.logging.LogInfo@1e2c9b99 < param > < / param >

  < / recording >

  I try with model db (DB empty, just a single table), but the error is same. However, if I try to copy the acronym tabele from SQL Server to Oracle it works fine...

  I guess it's something with the configuration, but beacause I am new in Oracle still have no idea...

  Any help would be much appreciated

  I thank in advance

  Stefan

  Hello Stefan,

  did you create the repository Migration of your database to Oracle (Tools-> Migration-> repository management)?

  The SS2K5ALLPLATFORM package is usually created when you add the migration of the Oracle database repository and it contains the function StageCapture.

  So please make sure that you have created a repository of migration in an Oracle database and associate it with the first step of your migration.

  -Klaus

• Server work 2011 on a HP Proliant ML150 G6 Intel Xeon E5504 at home will be

  You are looking to build a high-end media server based around home server 2011... What driver it basis for the home server?

  Hello Jennifer,

  I don't see why it doesn't not, however, I would post your question on the forums of Windows Home Server to ensure:
  http://social.Microsoft.com/forums/en-us/whshardware/threads

• ProLiant DL380 Gen9 - grouping of NETWORK cards

  Hello community,

  for a week we have new servers DL380 Gen9. Now, we want to install a server Win 2008 R2, but we cannot create a collection of NETWORK adapters.

  If I install the HP NCO (Network Configuration Utility), cp023339.exe Version 10.90, I get

  "The bot software will be installed on the system because the required hardware is not present in the system or the software/firmware does not apply to the system"

  I updated the driver / firmware of the NETWORK adapter have sought new HP Network Configuration tool, nothing.

  NIC: Map 1 GB 331i 4 ports Ethernet HP

  Can anyone help?

  Thank you very much

  / Hugo

  Hello:

  You can also ask your question on the Business - servers DL HP Support Forum.

  http://h30499.www3.HP.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.VHM-jHktC9I

• Win Server R2 .local vs OSX Server 10.11.5 2012

  Hello again,

  At the school I work with, we have a Windows Server R2 in 2012 in its early stage of implementation, tests of accounts of a dozen only and only top 20 Win 7 computers linked to it.

  It's summer, tie to the school but me.

  There are 100 school more win 7 desktop computers and laptops to join Windows Server this summer.

  The server has been defined as dot local TLD (such as "example.local") and is in a subnet 192.168.0/24. To do so, DNS but * not * DHCP, but that can be changed.

  It will serve as account, printer and server files mainly.

  We have a different subnet in 192.168.4/24 to the computer lab and I think we could create some more early enough for the cameras, although we are all in the same building, all behind the same firewall/contenuent filter.

  We do not what anyone outside the community school/serve as we are to the North under telecom limited satellite at the moment. Forget Internet wired for another decade or two.

  Now, I would like to put an OS X 10.11.5 linked server to the Windows Server.

  (1) is it interesting to restart the installation of Windows from scratch with a different extension point server local because it may conflict with Hello, certificates (self signed or not), etc...?

  (2) if so, what other strategy of naming you suggest?

  FB

  Hi new FB.

  Obviously, the first step that I recommend is the plan. By that I mean to plan in an iterative way as if your school will be on the internet. As it will be behind a firewall, NAT etc, implemented such as if somewhere in the not too distant feature, you will make the decision, or the decision will be made for the school to have internet exposure. Thus, in the plan to access the feature 'Fully Qualified Domain Name " already there to your server." In this sense, I build the entire network around that and start to implement and deploy.

  Keep your plan up to date, means that as long as changes occur this will our could have an involvement, as the document in your plan and play on the scenarios, at least on your pad planning in some form that can be electronic or pen and paper. I use an iPad and an app called issue 53 that allows me to do anything. I perform impressions and on file.

  Have your network configuration so that you can have expansion, so it must be dynamic with ample room for growth in quality. But I assume that you have done this already.

  Bandwidth and a full access might be a problem, use the service of caching from the beginning to reduce the burden.

  Of course, there more than this. There are some excellent resources on the Web and on the iBookstore. The three books by Reid Bondonis on the server are very good.

  But yes, it turns out I would start the Windows Server from scratch.

  HTH

  Leo

• Gl380 Gen9: Server HP GL380 Gen9 fan at bottom

  Hello

  I have two server nine hp gl380 gen 9 with one of the two or fans does not regulate, it turns inside all the time, how do I solve the problem?

  Thank you

  Hello:

  You can also ask your question on the Forum of Support Community Business Enterprise HP - Proliant Servers section.

  http://community.HPE.com/T5/ProLiant-servers-ml-DL-SL/BD-p/ITRC-264#.Vtb5rWb2a9I

• Cannot update/modify files - Server 2008 r2 for 2012 r2 upgrade

  I have a server that has been upgraded to Windows Server 2008 r2 to Windows Server 2012 r2. Before the upgrade, I could change the files in the directory c:\test. After the upgrade, I am unable to update when you are connected to the local computer. I can refresh the files from another machine via a UNC path, however. When I try to update files via the local computer, she wants me "save under" and says "Access denied" when I try to replace the file. I can rename it and save it in the directory, but not to replace the current file. When I check the effective permissions on the file, it says "Total control" and I am an administrator on the machine. However, if I add my account to the folder with the "total control" I can edit and save the file. So, I have a workaround in place, but I want to fix the real problem.

  Troubleshooting steps:

  • Turn off UAC
  • Attrib on folder and file settings
  • Removed all permissions and added to the folder
  • Copy/paste the contents of the folder new folder
  • I can create a new folder and the file and modify the content, if they are new
  • gpupdate/force
  • restarted several times

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Help! Window 2008 server R2 and R2 2012 window server time synchronize the difference

  Hello Sir/Madam,

  Help! I have a pair of window Server 2008 R2 and a pair of window Server R2 2012, who are the synchronization of time to one destination.

  After that time synchronization is successful, the window Server 2008 R2 clocks are still 1 second faster than those in the 2012 window servers.

  Is there anyone who got the same problem as me?

  Thank you.

  Kind regards
  Samuel

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• PowerEdge 1850 - Win Server R2 installation Issues 2012

  Try to install Win Server R2 2012 on my PowerEdge 1850 servers.  I have the installation on a USB bootable (created using Rufus).  The system starts and begins to load files in preparation for the installation of Windows and then I see the following:

  

  I tried recreating the USB on different drives and you still receive this error message.  I also tried to turn the OS Install option in the BIOS on Off.  When I do this, it goes to the Windows Logo but immediately fails and restarts.  Any ideas?

  8G servers are not compatible with the R2 in 2012... not all simply not supported - not compatible. You can run in 2012, but not R2. 2008 R2 is the ideal operating system for this generation of server.

• Cannot install Windows Server on the new server Poweredge T110 II 2012

  HI - just took delivery of my new Dell PowerEdge T110 II with two 1 TB drives in RAID 1, but without any operating system installed.  On the Windows Server 2012 Standard edition installation, the installation routine is unable to detect readers when it comes to choosing the installation location.  I can 'find the pilots', but on the insertion of the Dell supplied DVD, it does not find everything.  I changed different settings, rebooted and tried several times without success.  Entering the system at boot configuration screens, I can clearly see my 2 x 931GB disks and the virtual drives installed on them (I even removed the implementation of RAID and the virtual drives at some point to see if that was the problem).  Any help appreciated.  Regards, Barry

  Hello Barry

  You should have received a disc entitled management of system and Documentation Tools. If you start on this DVD, it takes an option to install an operating system. Follow the on-screen instructions and it should load the required drivers. If this does not work then let me know what RAID controller you have.

  Thank you

• The Dell R710 server upgrade to R2 2012 Windows

  Question for the forum:

  I have a Dell R710 server.  There a PERC 6 / i RAID card in there.  There are discs 5 x 2 TB on the PERC 6 / I configured in RAID-5 right now with the 6th disc as a 480 GB SSD.   I currently own WINDOWS 2012 R2 installed.   Windows 2012 sees the TB 5 x 2 as a 7.27 TB HDD and the 480 GB SSD as a second hard drive.

  I heard the Windows 2012 R2 storage solution is best.  I want to convert the TB 5 x 2 hard drives just so R2 2012 Windows can control it.  I have the following questions:

  1. What do I have to go in PERC 6 / I controller and remove the RAID 5 and create a virtual disk for each 2 TB as a RAID-0 disk drive so that Windows can see each as separate hard drive?

  2. each of the 2 TB is a SATA II drive.  PERC 6 / I can only support up to 2 TB to 3 Gbps.  What is the best way to do it?  Can I upgrade to SATA III drives or 6 Gbps?  This server which will support at all?  I have

  3. If I install a SATA III controller in the PCIe slot, how can I plug SATA III drives to the card.  All drives are connected to the server to forward now.

  4 If a disk fails, Dell R710 will still flash light orange on the forehead to show what defective hard drives?  People still hot to swap the drive?

  5. Windows 2012 R2 will be able to tell what defective hard drives?  With 5 x 2 to for the storage and 480 GB put in place in the SSD for tiered storage, which is the best way to configure it for performance?  Simple volume or mirror?  How many drives can fail until Windows cannot recover from the failure?

  Please advise on the best way to convert more software raid WINDOWS 2012 R2.  Thanks for the help in advance!

  1. This is the only way to make available to Windows as separate disks, as the PERC 6 does not support the RAID/JBOD.

  2. the PERC 6 supports a maximum drive size of 2 TB. The material is limited to 3 Gbps. You can use 6 GB/s drives, but they will operate as discs 3 Gbps.

  3. you will need to connect a cable from the backplane to the new controller, instead of the 6 PERC. Backplane may not support 6 GB/s speed, if you plug a controller 6Gbps 6Gbps drives and they bind upward to 3 Gbps, that is why.

  4. Yes.

  5. Yes. How can fail depends on how you have set it up and how much data is there.

• Essential SNMP/OpenManage/Ncentral on Windows Server R2 block of 2012

  Hello.

  I have problems on the two servers Dell with Windows 2012 R2 key and SNMP reporting.

  We use SNMP and OpenManage for reporting to Ncentral (monitoring system).

  I tested and I know that the configuration that I use only does not work on Windows 2012 R2 key and Dell servers.

  In the event viewer, I found this:

  The SNMP Service encountered an error when accessing the registry SYSTEM\CurrentControlSet\Services\SNMP\Parameters\ExtensionAgents key.

  Any suggestions?

  Luca

  Hi Luqa,

  Are you referring to OpenManage Essentials (OME) or OpenManage Server Administrator (OMSA)? More like OMSA. This forum is dedicated more to MOE, if you can move this post on the forum of general systems management, you would get more help there.

  

• Version of Cisco ACS 5.1.0.44.3 integrate with active directory server from Microsoft windows 2012?

  Version of Cisco ACS 5.1.0.44.3 integrate with active directory Microsoft windows 2012 R2 server?

  Unfortunately, it does not support R2 2012

  5.1 ACS supports all editions of:

  Windows Active Directory (AD) 2000

  Windows AD 2003

  Windows AD 2003 R2

  Windows AD 2008

  Source

  Windows AD 2012 R2 is supported after ACS 5.5 patch 1 and following.

  Source

  Please find below the steps to go from 5.1 to 5.5 hotfix 1:

  STEP	FILE	COMMAND
  Apply the 5.1 patch 6	5-1-0-44 - 6.tar.gpg	ACS patch install repository 5-1-0-44 - 6.tar.gpg ftp_repository_name
  Apply 5.3	ACS_5.3.0.40.tar.gz	application upgrade ACS_5.3.0.40.tar.gz ftp_repository_name
  Apply the patch 5.3 8	5-3-0-40 - 8.tar.gpg	ACS patch install repository 5-3-0-40 - 8.tar.gpg ftp_repository_name
  Apply the sharp Patch	Pointed-PreUpgrade-CSCum04132-5-3-0-40.tar.gpg	ACS patch installs Pointed-PreUpgrade -CSCum04132- 5-3-0 - 40.tar.gpg repository ftp_repository_name
  Apply 5.5	ACS_5.5.0.46.tar.gz	application upgrade ACS_5.5.0.46.tar.gz ftp_repository_name
  Apply the patch 5.5 1	5-5-0-46 - 1.tar.gpg	ACS patch install repository 5-5-0-46 - 1.tar.gpg ftp_repository_name

  Best regards ~ jousset