Need to do system restore after you perform the most critical updates

Similar Questions

• Windows not loading after system reboot after installation of the last security update.

  Windows not loading after system reboot after installation of the last security update. Have you tried last known good Configuration, Safe Mode, neither of her works.

  No matter which option to choose, it comes to me to the BIOS boot screen after 5 seconds in loading Windows.

  Running Windows Vista 32 - Bit with SP2 installed system. 2 GB OF RAM. Intel G31 Mobo.

  Dated this February 11, 2010.

  I managed to restore my Windows to previous restore point, using the CD of Vista to start, and then select repair Windows. I hope this helps.

• Where do the photo go after you perform the collage?

  Successfully, I did my collage and saved.  Emailed to family and set as wallpaper.   I needed one of the photos I used in the collage, and is no longer in its original photo file.   Where the images go after edit and how that I get back them?

  Thank you
  Jim
   
   
  Moved from Feedback Forum Windows pictures and video Forum.

  The link you provided high see "How can I recover my photos on my hard drive" is a dead link, it goes to a page that does not exist. .

  And this isn't what I ask... at least I think that's not.

  I bought and installed the software from Microsoft called "Microsoft Research why 2008".   I created several members of their family (4) collages using photos, they sent, and I.

  I need one of my pictures yesterday for something else and when I went back to its original location it was not there.

  That why 2008 take pictures when the collage was created, recorded and sent.   I can't find the pictures I used in the last collage.

  Thank you

  Jim Yeary

  jyeary3

  (1) try the system restore to the point before you use the software to edit

  What is the system restore

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  (2) earlier I advised to do a search of the drive you are saving the files on (usually drive c :) - look at TIFF files or .jpg, .png or .psd

  (3) recuva - A free, easy to use undelete and recover the files tool

  http://www.Piriform.com/Recuva

  Broken in previous post link page

  http://ask-Leo.com/how_do_i_recover_my_lost_photos_on_my_hard_disk.html

  If RAW files are saved, try to find these formats... RAW files are similar to photo negatives

  • .3FR (Hasselblad)
  • . ARI (ARRIFLEX)
  • . ARW .srf .sr2 (Sony)
  • . Bay (Casio)
  • . CRW , .cr2 (canon)
  • . Cape .iiq .eip (Phase_One)
  • . DCS .dcr .drf .k25 .kdc (Kodak)
  • .DNG (Adobe)
  • . ERF (Epson)
  • .fff (Imacon)
  • . MEF (Mamiya)
  • . MOS (leaf)
  • . MRW (Minolta)
  • .NRW .nef (Nikon)
  • .orf (Olympus)
  • . PEF (Pentax) .ptx
  • . PXN (Logitech)
  • . R3D (RED)
  • . RAF (Fuji)
  • . RAW .rw2 (Panasonic)
  • . RAW .rwl .dng (Leica)
  • .rwz (Rawzor)
  • . SRW (Samsung)

  If you have not moved the picture, it should be in the original file. Have you opened the software MS Research why and searched files containing the picture?  When you use this type of software, always make a copy of the photo.

• Poor performance of Firefox after you apply the latest Microsoft Updates (Win 7 x 64); all solutions?

  Recently, I updated to Firefox 27 and noticed really horrible performance (Manager tasks indicates FF connecting a carrot, frequent "Firefox is not responding messages", even strikes in late development in the URL bar). It's on an Ideapad s205 (AMD E450 APU, Win 7 x 64, 8 GB RAM, SSD) who has always had pretty decent web browsing performance for a low end machine.

  At first, I blamed FF because poor performance coincided with the update to version 27, but now I think that the first cause to be a recent Microsoft Update. The reason is that my wife has a laptop with a same low-end APU (APU C60, hard drive 5400 RPM, 4 GB of RAM, Win 7 x 64), and she was getting much better performance with FF27 until I applied a backlog of some 90 + updates. Now she suffers from the same poor performance I am and she is pretty p * ssed at home.

  Interestingly, I have two WIn 7 x 64 Intel computers to office who have 27 FF and are fully patched, and performance are very good. Maybe this problem is specific to AMD APU.

  Any thoughts? I tried to turn off the backend Azure with some comments in this forum, but makes little or no difference.

  Thank you!

  Success! 32 FF seems to have solved my problems of performance. Thank you!

• Unable to connect to the internet after you perform the recovery on the laptop.

  Original title: after recovery on my computer dell laptop running Windows XP

  I have a laptop Dell circa 2004 with windows XP Professional on it. I contacted a bug of some kind and it was very slow and the fan even stopped working. My only choice was to use the disk installation and F8 to recover the laptop. After that I got all going again once I tried to set up a new connection and it doesn't seem to know that I have a wireless adapter or the ability to connect wirelessly. Any body can help me to understand why it does this?

  Hi Phillacio,

  In addition to the procedure step by step proposed by Shenan Stanley, you can download the network drivers from the website of Dell support on another computer, bring to this laptop computer using a flash drive and install them first.

  Then follow all the steps above one by one, and your laptop should work great.

  Response with the State of the question and we say if it worked or not.

  Thank you!

• Bootcamp (Win10) has not started after you changed the partition and updated at El Cap.

  I have a MacBook Pro (retina, 15 inches, end of 2013), 2 GHz Intel Core i7 with 8 GB of Ram.

  I had 2 system installed, Win 10 + Yosemite from the windows of beginning and the use of most of the time.

  Yesterday, I ran out of disk space and passed the partition in OS X with disk utility.

  While I changed the partition and I also upgraded to the El Cap.

  After all, I can't start by winning 10 more, although I could see my windows in the startup disk Control Panel.

  I checked some thread here and mess with command autour terminal, but nothing has worked for me.

  Here is the result of diskutil:

  Jerbins-MacBook-Pro: ~ the jerbinyuan list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 70.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft data base BART 30.0 GB disk0s4

  5: Microsoft database HOMER 150,0 GB disk0s5

  Jerbins-MacBook-Pro: ~ list of cs jerbinyuan$ diskutil

  No logical volume group CoreStorage found

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 136992184 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  137401824 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  768 138671360

  138672128 58595328 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  197267456 292966400 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639] < unknown ID >

  2: AF 1023 254 63 - 1023 254 63 [409640-136992184] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [137401824-1269536]

  4: 0 b 1023 254 63-1023 254 63 [138672128-58595328] Win95 FAT-32

  Jerbins-MacBook-Pro: ~ jerbinyuan$ sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  00000000 2nd eb 58 90 42 53 44 20 20 34 34 00 02 20 20 00 | X.BSD 4.4...  .|

  00000010 02 00 00 00 00 00 00 20 00 f8 ff 00 00 f8 43 08 |... C. |

  18 00 00000020 7th e0 03 37 00 00 00 00 00 00 02 00 00 00 |... ~... 7..........|

  00000030 01 06 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  00000040 80 00 29 11 14 2f 2 a 42 41 52 54 20 20 20 20 20 |..) ... / * BART |

  00000050 20 20 46 41 54 33 32 20 20 20 31 c0 d0 bc 8F fa |  FAT32. 1... |

  00000060 00 7 c fb 8th d8 e8 00 00 83 19 bb 07 00 fc 5th c6 | | ......^.......|

  00000070 c0 ac 84 74 b4 06 0e cd 10 eb 30 cd 16 cd e4 f5 |... t... 0....|

  00000080 19 0D 0a 4th 6f 6F 2d 73 79 73 74 65 6 d 20 64 69 |... Nonsystem di |

  00000090 73 6B 0D 0 a 50 72 65 73 73 20 61 79 20 6 6 b 65 | SK... Press any ke |

  000000a 0 79 20 74 6f 20 72 65 62 6f 6f 74 0D 0 a 00 00 00 | is reboot... |

  000000b0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |... |

  *

  000001f0 00 00 00 00 00 00 00 00 00 00 00 00 00 00 55 aa |... U. |

  00000200

  Jerbins-MacBook-Pro: ~ jerbinyuan$ diskutil info/dev/disk0s5

  Identifier of the instrument: disk0s5

  Device node: / dev/disk0s5

  Set: No.

  Part of the whole: disk0

  Device / media name: BOOTCAMP

  Volume name: HOMER

  Gendarmerie: Yes

  Mount point: / Volumes/HOMER

  Personality of file system: NTFS

  Type (Bundle): ntfs

  Name (Visible to the user): Windows NT (NTFS) file system

  Partition type: Microsoft Basic Data

  Operating system can be installed: No.

  Media type: generic

  Protocol: PCI

  Smart: checked

  Volume UUID: 4EC75B8E-02A8-4B26-B7F3-5EA9D0A47FA9

  Disk / Partition UUID: 776C43C1-7E4C-4997-BDF5-A91FD406DEBD

  Total size: 150.0 GB (149998796800 Bytes) (exactly 292966400 512-Byte-units)

  Amount of free space: 18.5 GB (18479718400 Bytes) (exactly 36093200 512-Byte-units)

  Device block size: 512 bytes

  Allocation block size: 4096 bytes

  Support read-only: No.

  Volume read-only: Yes

  Location of the device: internal

  Removable media: no

  Solid State: Yes

  Thanks for help.

  Please follow the steps described in [help] can not boot Windows (8.1) after partition resizing .

• What is the URL that needs Adobe Acrobat to contact for Activation after you enter the serial number

  What is the URL that needs Adobe Acrobat to contact after you enter the serial number for Activation? We need internet access to our users.

  There is a little, but they are all on the adobe.com domain.

• After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside...

  After you download the security update 2015-008 I lost the function of the function keys and some other functions. Have already played with the keyboard f nothing helps. Are also past system on and outside... need help pls

  PS noticed the update downloaded twice

  disregard my previous question... I found the answer: F1, F2 has been ticked on.

• After windows auto updates can't open Internet Explorer, but can open firefox. Vista Home Premium, CA Security Suite. Can do system restore and get on, but it will update the next day and problem reports.

  I get a popup to firewall this tells me Internet Explorer tent to access internet I click on allow but get no results. Then I get this page can not be displayed, and you are not logged as an administrator

  Hi Snoopy65,

  Welcome to the Microsoft Answers site!

  Perform a system restore and then try to install each updates manually one by one. Each time that you install the update, restart the computer. Take note of the update that is causing the problem and let us know. We will be in a better place to help you if we know the exact update which is causing the problem.

  To run the system restore

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  2. in the System Restore dialog box, click on choose a different restore point and then click Next

  3. in the list of restore points, click a restore point created before you started having the problem, and then click Next

  4. click on finish

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  For more information, please follow the below given link:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212/

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  The course does not send the results of the tests and reports system (Saba) after trial. The course remained "incomplete". What can you recommend?

  Ok.  So you're screenshot compared to SCORM clouds now shows you're scoring 100% in the quiz, but your state of completion will still come out incomplete.  Then of course, your quiz notification settings not award success based on passing the test.

  Try to set your quiz the way I show this screenshot using SCORM 1.2 instead of 2004.

  

• After you install the updates of windows for Vista home edition, the computer tries to restart and then says "computer could not start", then begins to the Startup Repair. Suggestions, how can I fix?

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Welcome to the community of Windows Vista answers.

  First of all, we will try if we can start in safe mode.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Steps to start your computer in safe mode with networking
  1. to start mode safe mode with networking, restart the computer and press the F8 key for about four to five times. You will see "Safe Mode with network" listed in the advanced options of Windows.

  2. Select "Safe Mode with network" and then press ENTER.

  Access the link below for more information on how to start in "Safe Mode with Networking":
  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  The system restore.
  http://support.Microsoft.com/kb/936212

  Method 1:
  The restore of the system of Windows Recovery Environment (WinRE)

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair.

  (f) in the system recovery options, click on system restore to restore the system.

  Method 2:

  Run the disk check Windows recovery environment to correct the bad sector on your hard drive

  (a) Insert Vista DVD and boot from the DVD.

  (b) that you want to start the computer from the Windows Vista DVD, you press a key, your keyboard when you see the prompt. You should now see a black screen with a white status bar at the bottom indicating that Windows is loading files... After some time, the status bar becomes completely white and you will see a screen indicating that Windows is loading. The environment of the installation of Windows continues to load and when finished you will be presented with a screen that prompts you for information about your location and language.

  (c) in this screen, you must configure the language to install, time and currency format and keyboard or options for method of entry so that they are well positioned. When done, press the next button. You will now be at the main Windows Vista Setup screen where you would normally install Vista on a computer.

  (d) because we want to repair the computer, you must click on repair your computer option. This will bring you to a new screen where the repair process get all facilities of Windows Vista on your computer. When finished, you will be presented with the System Recovery Options dialog box

  (e) select the Vista installation you want to repair

  (f) in the system recovery options, select command line and enter the command chkdsk/r.

  For the above two steps, you can see the link below.
  http://windowshelp.Microsoft.com/Windows/en-us/help/95b4c03a-ac42-49a4-a90d-8f3736a995271033.mspx

  Once you perform the restoration of the system, download the updates and install them manually one by one, this should help you knowing what update causes this problem.
   
  Concerning
  Amrihta.

• I did a system restore and I went to do my updates, but get this error number: 0x8024400A

  I did a system restore, and I went to do my updates, but this error occurs, could someone please?

  [Error number: 0x8024400A]

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  Hello

  1. don't you make changes on the computer before the show?
  2. what Windows update you are trying to install?

  Method 1:
  You can run the fix it and check.
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 2:
  Perform a clean boot and try to update windows and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
  
  Method 3:
  You can also try the steps in the supplied knowledge base article and check.
  You can not install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after you install Windows XP SP3 immediately after a clean install, or
  http://support.Microsoft.com/kb/943144
  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
  http://support.Microsoft.com/kb/322756
  Method 4:
  You can also follow the article mentioned below to resolve the error: 0x8024400A.

  http://support.Microsoft.com/kb/836941

• Windows automatically restarts constantly, cannot access the system restore point, cannot access the computer in safe mode

  Hi all

  For the not 24 hours I tried to access my computer in normal mode. When I turn on the pc, it says "configuration data 1 of 3 steps...". 0% complete"he never spent 0% and within seconds, it automatically restarts and starts again. It's so frustrating! I have a windows vista pc (purchased in ' 06). I can only access my desktop in SafeMode.

  I tried to perform a system restore, but not like he says "recovery disk is not the restore point selected. What should I do? I tried to manually create a restore point, but cannot access the system and Maintenance, while in safe mode. I can't do anything but literally access the internet. How can I get Windows back to factory settings it is with these limited resources? I have a Dell reinstallation DVD.

  I searched my programs and found that recently Windows automatically updated and downloaded "Microsoft Powerpoint Viewer" and "for 2007 Office system Compatibility Pack '. Now, I think it has something to do with it, because they were the most recent updates, before the pc crashed. But I also fear that it may be a virus, which has completely hijacked this PC. How am I supposed to get rid of a bug, if I can't even get the necessary antivirus?

  Sorry for the ranting, but it's so stressful when my pc is completely down. Please, please please help me. Thank you in advance for reading this same!

  Arianne

  Hello

  you talk about restore and system recovery disc in the same breath

  they are 2 different things

  and you can NOT create a restore of yesterday and today!

  yesterday is gone

  If it does not already; You can't do

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  The malware removal:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Reinstall vista from Dell DVD

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

• Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.

  Mailboxes are not visible in mail after you run the OS El Capitan 10.11.5 upgrade.  The boxes are there (somewhere), and I can save the messages in them.  I can just see them or call back messages on my macbook air.  Structure of messaging and mailbox is intact on my iPad and iPhone, and all messages are recoverable.  Any help to restore the messages on my Mac would be greatly appreciated.

  The mailbox list is divided into categories with such topics on my Mac. When you position the cursor on one of these positions (with the exception of the mailboxes), you should see the Word display / hide it on the right. Please, click on show, if that's what you see.

  In the category of the mailboxes, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small tip of arrow. If the arrow points to the right, click it so that it points downwards.

  Also note that you may need to scroll the list of mailboxes upwards or downwards to see it all.