Need to identify the particular SEO plugin

Similar Questions

• Need to identify the model A100 to select the good BIOS update

  Good morning to all and thanks in advance for any whole made :-> assitance

  My question is this:
  How to identify the exact model of a Satellite A100 PSAAxx series laptop?

  Reason:
  I need to update the BIOS and I'm uninclined to simply apply the updates, I could get for fear of turning it into a brick.

  What I know:
  There is some time, my wife and I bought a used Satellite A100 - in good working condition, but warned that he has 'problems' with USB ports driver. The time has come to address the issue of the USB, and the upgrade of the BIOS seems to be a good starting point.

  At the time of purchase, the label with the model number and the number of harem on the bottom of the system was quite readable - unfortunately, this label has subsequently lost all 'tailor-made' (we know what the fields are called by all useful information has disappeared).

  It is a Toshiba Satellite A100 (I have discs recovery and thus marked user manual).
  The user manual specifies the model number PSAAxx.
  CPU: Celeron M 1.4 GHz
  RAM: 704 MB
  HD: 40 GBbyte
  Graphics card: ATI RADEON XPRESS 200 M Series
  BIOS: v1.20 2008-12-12

  Any suggestions gratefully received

  Peter Townson :->

  Hello!

  To identify what A100 you exactly, you can use Toshiba PC Diagnostic. If you have installed the laptop with the recovery disk, this tool is installed too.

  If you n t have PC diagnosis, you can also download:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In the diagnostic tool you can see on the part number (basic information of category).

  Good bye

• Need to identify the model no laptop Pavilion G6

  No standard information on the case label.  Label seems to be hybrid Windows Key code also including HP codes, but no code is identified (IE without s/n, p/n prefix).

  Probably included product codes are:

  584037 001

  X 16-96072

  However, none of these codes are accepted on the HP web site.

  Can anyone help identify the correct HP product/model code?

  Hello

  Can be useful to check the alternative label tags displayed in the sub-heading "Show samples of the additional label" on the page here.

  Kind regards

  DP - K

• Need to identify the designation of port COM through BACK...

  I'm editting a program that sends and receives information to a device via a USB - serial adapter. Previously, the program has been run only on one pc which always use the same COM port when the device is connected. Scripts used with this program have been written to always specify this port. After having taken the device and connected to another pc, the pc allocates another COM port - this is a relatively easy task for me to go through the device management and identify the appropriate COM port, modify the script and get the device communicates with the pc. HOWEVER, in the future, communication must be maintained between the device and a laptop with any user.

  The program you are using may open a windows command prompt and run DOS commands. If possible, I would like to help you find a way to use BACK to identify the COM port used by the USB adapter so I can assign this port number for a variable to be used in scripts, creating their infallible to any user.

  Thanks for your time,

  Chris

  Hello

  To improve assistance to this subject, you can ask your question in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en-us/categories

• Need help identifying the drivers on new installation of Windows

  Hello

  I installed a new hard drive on my laptop and installed Windows 7 from iso dvd.
  Problem is that I need to connect to the internet to update the drivers, but drivers Ethernet and network must be updated before they will work.
  Even more, when I go to the Windows Device Manager and click Properties for the device, it does not show the manufacturer of the device, Details of the driver or any other identifying information that would allow me to use another computer to download the drivers on a CD and install it on my laptop.
  Date of manufacture of bridge 01/06/2012
  model number ne56r12u
  Thank you
  William

  William

  GO to the gateway > download network on a USB port drivers > install on gateway

  If you want to know what they are go to the Device Manager (start > Search > Device Manager) right-click on the missing driver > properties > details > use the pull down > find the hardware id > google (see shears)

  

  

• Need help for the particular case of selection

  Oracle DB 12 c, I think than 12.1.2

  drop table person_tests;

  create table person_tests)

  person_id number,

  test_type_id varchar2 (1).

  date of test_date

  );

  insert into person_tests (person_id, test_type_id, test_date) values (1, 'A', to_date('01012000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (1, 'A', to_date('01022000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (1, 'B', to_date('01032000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (1, 'B', to_date('01042000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (1,', to_date('01052000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (2,', to_date('01062000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (3, 'A', to_date('01072001','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (3, 'A', to_date('01082000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (3, 'B', to_date('01092000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (3, 'B', to_date('01102000','MMDDYYYY'));

  insert into person_tests (person_id, test_type_id, test_date) values (3,', to_date('01102000','MMDDYYYY'));

  People as a participant in some of the tests: A, B and C where each event is tagged with a date when finished.

  I need to get out of the only people who have done 2 tests of type A, 2 type tests B and 1 type C. I test have show the type of test and the date of the most recent of these tests. In the above example would output desired

  1 JANUARY 5 C 00

  3. A 7 JANUARY 01

  Hope that this definition of the logical problem

  Hello

  Sorry, I missed the obligation to show the most recent test_type_id.

  Assuming that the date to display is the date, that the minimum conditions were met (if not gratutitous trials came afterwrds), you can do something like this:

  WITH got_r_num AS

  (

  SELECT person_id, test_type_id, test_date

  , ROW_NUMBER () OVER (PARTITION BY person_id, test_type_id)

  ORDER BY test_date

  ) AS r_num

  OF person_tests

  WHERE test_type_id IN ('A', 'B', 'C')

  )

  SELECT person_id

  MIN (test_type_id) DUNGEON (DENSE_RANK LAST ORDER BY test_date) AS last_test_type

  MAX (test_date) AS last_test_date

  OF got_r_num

  WHERE r_num<= case ="">

  WHEN 'A' THEN 2

  WHEN 'B' THEN 2

  WHEN 'C' THEN 1

  END

  GROUP BY person_id

  HAVING COUNT (*) = 5-2 ' A + 2 ' B + 1 'C '.

  ;

  What test_type_id would you like to display tie for the final round?

  I just saw your post by saying that a person with 3 or more 'A' type tests should be excluded.  In this case, my original solution (with = in the WHERE clause) is what you want; only FINALLY used to get past test_type_id.  The solution in this post is for the situation where you don't care if there are 3 or more ' has, but you want to ignore all but the first 2.

• Need to find the cmos on Satellite Pro 2100 battery

  I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  The brand is a Satellite Pro SP2100, model PS210E006P9-EN number, but I can't find this brand/model on the Toshiba site. The closest I can find is Satellite 2400-103, part number: PS240 - T 014, 1, that seems identical.

  I tried to use the identify tool of Toshiba to detect what is the laptop, but that fails to provide results.

  I also need to find out what food is for this unit as the current is defective and exposed wires.

  The adapter of current with her is PA3201U-1ACA, the problem is that this card has another card on the end to fit the power plug to the back of the laptop. The connector at the end of PA3201U is too thin to fit.

  Hello

  This laptop is very old and the name of this machine is: Satellite Pro 2100 PS210E

  > I have a laptop that is not keep date/time settings and I need to identify the laptop to find the correct instructions to take apart.

  Usually the CMOS battery can be charged. You must connect the power adapter and the laptop must be powered for about 12-14 hours.

• Identify the Version of the hotfix in ACS for Windows 4.2

  Hi guys,.

  I need to identify the good patch Version in a customer ACS for Windows 4.2

  How can I do this task?

  In the page, I can't find any reference to patch

  My best regards,

  André Lomonaco

  It will show also from my experience you PATCH version, here's another thread that said click on the Cisco logo, let me know if it works for you or not.

  https://supportforums.Cisco.com/thread/1003509

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Do I need the Adobe RAW plugin?

  I recently downloaded Lightroom (current version). Photographer friends tell me that I need the "Adobe RAW Plugin" to process my RAW files before using Lightroom - but they use Photoshop Lightroom not. As I read the RAW page, it seems that this feature is native in Lightroom and I don't need a separate application? I am able to open my RAW files in Lightroom and treat them. Is there a reason I don't want to use the RAW plugin too? First? Instead? I'm confused.

  This aspect causes a lot of confusion.

  • Lightroom can be used alone to manage, modify / adjust and print / export versions processed photos.
  • LR (in general) can adjust the appearance of a photo, but cannot change the content of a photo.
  • Change the photo, LR so can't do, can be outsourced to another (external) image editing program.
  • Photoshop is an example of an external editor, but there are other alternatives.
  • LR can talk either directly and "classically" a program Editor (first making a standard TIFF file for this to work and reading and then later in some changes were recorded in this)-ACR does not (completely irrelevant for this scenario);
  • OR another scenario is for LR to work with Photoshop in particular, offering few additional working methods (Adobe owner). This option is based on PS and Adobe Camera Raw, being present, in versions that are at least contemporary with LR.
  • When LR detects that this is the case, he adopts as a default method for external mounting.
  • When LR detects that this isn't the case, it greys options - for individual images: Edit in PS as smart object, or for multiple images: Edit in PS as layers / Photomerge / HDR. And he then uses only the direct method, in which ACR is not involved. Photoshop is used then not differently would have another program.
  • ACR is installed automatically with Photoshop and can be upgraded later to the more recent drafts within the PS: only up to a point, within this specific 'generation' of PS.
  • Once the PS goes to a new 'generation', then it would eventually be required to qualify for all newer versions of ACR. Also, therefore, to return to par with the all-new 'generation' of LR and once again enjoy the range of work for this partnership options.
  • The composition of the creative cloud keeps everything functioning optimally, while keeping up to date together.

• need help to identify the responsible application of integration...

  Hello

  I'm a guy MSSQL and Oracle is still a little mysterious to me.  I'm looking for assistance tracking the application in an environment that is responsible for special inserts.

  For example, I have 10 different programs running and inserting values to a DB.  I need to know which of them inserts a '0' in a particular column.

  I found a trigger that will tell me the user, unfortunately these programs use a credential that is shared so that it does not help me... here is what I have:

  CREATE OR REPLACE TRIGGER check_for_zero_insert

  AFTER INSERTION

  ON DATA_TABLE_0001

  FOR EACH LINE

  DECLARE

  v_username varchar2 (10);

  BEGIN

  -Find user name of the person making the INSERTION in the table

  SELECT user INTO v_username

  DOUBLE;

  -Insert record into the audit table

  INSERT INTO audit_table

  (instance.

  seems,.

  user name ( )

  VALUES

  (: seems,)

  : instance.

  v_username);

  END;

  But even once, user name will not help me, I need the originating instance if possible (a name of the executable, PID or something to identify the specific application of the other side.)

  There are other columns of information in session $ v - you might find program, machine or a process (PID process) useful.

  declare

  v_user varchar2 (30); v_program varchar2 (64); v_machine varchar2 (64); v_process varchar2 (24);

  Start

  Select the process, machine, program, osuser

  in v_user, v_program, v_machine, v_process

  session $ v where sid = sys_context ('userenv', 'SID');

  end;

  /

• Need a visual cue for the status of Plugins

  Need a visual cue for the status of Plugins:

  . . . "Ask to activate" - these are light gray - it's good

  . . . "Always enable" - should be in light green

  . . . 'Never turn on' - should be in red light - it currently goes to a slightly darker shade of grey

  Be able to sort them based on the State

  The above would make it easier to verify that they are the way you want

  There is only a ' true/false' = active tribute to work with, so you cannot always distinguish between activate and ask to activate.

  .addon-view[type="plugin"][active="false"]{box-shadow: inset 0pt 0pt 100px rgba(255,144,144,1.0)}

• You will need to download the quicktime plugin to use the Blackboard for the school site. can not find the plug-in but downloaded real quick time. help please, thank you!

  Hello

  I need to download the quicktime plug-in to use certain features on the site, Blackboard, for school. Plugin cannot be found and I downloaded quicktime. Help, please.

  Thank you

  Kirsten

  The QuickTime plugin is part of the QuickTime multimedia player.

  See:

  • https://support.Mozilla.org/KB/using+the+QuickTime+plugin+with+Firefox

• pages keeps saying I need a plugin but the button 'Search plugin' gives ALWAYS "nothing found" - do I need or not?

  I have an almost brand new Mac 10.7.5. Downloaded Firefox very well. But a lot of pages (not all) gives me a popup saying that additional plugins are required to display all of the content. When I click on the "Install missing plugins" button, I get a window saying: "no appropriate plugin was found." Does this mean the popup saying I need a plugin is false, or what?

  Your list of plugins does not display the Flash plugin, which is used by many Web sites, so perhaps it comes of this plugin.

  You can check in tools > Modules > Plugins if it might be disabled.

  Update the Flash plugin to the latest version.

  • https://support.Mozilla.org/KB/managing+the+Flash+plugin
  • http://KB.mozillazine.org/Flash
  • http://www.Adobe.com/software/Flash/about/
  • http://helpx.Adobe.com/Flash-Player.html

• How to identify files that may be deleted without jeprodizing the files needed to run the system?

  How to identify files that may be deleted without jeprodizing the files needed to run the system?

  If you have to ask, the answer is "Don't '.  Uninstall programs that you don't need through programs and features or add/remove programs.  Do not, under any circumstances, remove files unless you are absolutely sure you know what you delete first to 100%.

• Need a tool to identify the most cpu consuming thread.

  I have the database Oracle running on Windows 2008 server edition.

  Recently the oracle process has begun to consume 100% cpu it is not the particular moment where it happens.
  This is why I need a tool to check the particular thread in oracle.exe process consuming more cpu which would help find most cpu of your session in the oracle database.
  Thank you

  Hello

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please reach out to the community of professional support in the TechNet below:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/