Need your advice on the creation of the image

Similar Questions

• Need your advice, choose the best update for first Pro CC

  Need your advice, choose the best upgrade.

  Because nobody can have a computer that runs all functions as quickly as desired, we have manage their it resources according to your needs, budget and for the money. Below is a fundamental issue related to Adobe Premiere Pro 2015 CC.

  Need for better visualization without jerky look of a stutter and overall better performance incease.

  Would I do better with? (Choose one please)

  1. Passing of an SSD to 2 SSD in RAID 0 configuration - cost about $350.
  2. Getting my video card NVIDIA GeForce GTX 560 Ti for a NVIDIA GeForce GTX 970 overclocked to 4 GB GDDR5 graphics card - $350.
  3. From Win 7 Pro 64-bit to win 10 Pro 64-bit.

  Please explain why you made your choice.

  
  

  Thanks in advance,

  Tom
  

  Tom,

  At this point, you're pretty much stuck to a GPU upgrade. You see, that the GTX 560 Ti is not is properly supported in first Pro CC 2015 when it comes to acceleration GPU of MPE. As such, you may experience random program crashes and/or repeated which are fixed only when you disable acceleration GPU of MPE and run first in software mode only MPE.

  The other improvements are out of the question: the i7 990 X CPU uses the chipset Intel X 58 now-seven-year-old, whose native Intel SATA ports are limited to SATA II (3 GB/s or 300 MB/s) flow. All support 3 SATA or USB 3.0 on motherboards that use such an old chipset comes entirely from complement third-party chipsets to companies such as NEC/Renesas and Marvell. And we know how slow the Marvell SATA 3.0 ports work are compared with native Intel SATA 3 implementation on newer chipsets. Unfortunately, a CPU upgrade would have exceeded the maximum budget $ 350 because both the CPU and motherboard (and probably RAM as well) should be replaced by such upgrade. And additional SSD upgrades are out of the question because newer SATA SSD would have been restricted by the sustainable maximum rate of 270 MB/s of SATA II.

  Therefore, the only feasible upgrade would be a new GPU for your system now five-years.

  Good luck in your quest to upgrade,

  Randall

• Please I need your help in the next issue.

  Please I need your help in the next issue.

  I'm trying to change a driver of function generator to perform the following operations:

  starting with the initial value (for example 1 MHz) for some time (for example 10 sec.) and turn off the output for another time (e.g. 20 seconds) and then start again but this time with the frequency increment value (for example 1 MHz + 0.1 x n MHz = 1.1 MHz for n = 1, 2, 3,... n).

  The function generator model is ag33xxxGPIB and the link of the driver is http://sine.ni.com/apps/utf8/niid_web_display.download_page?p_id_guid=E3B19B3E9066659CE034080020E748...

  There is no modifications are required for the driver, although there might be an example that you can edit. You use the function of the frequency set in a loop with a shift register. Initialize the registry to offset with the frequency of your departure and each iteration of the loop, add the value of the step. Exit the loop when the stop frequency is reached. Try to write something and after back if you have any problems. Fix what you wrote.

  It's pretty basic LabVIEW code. Did you do the online tutorials?

• Need some advice on the best way to do specialized source distribution

  I need to give a customer a labview block, they can use our material in their own labview code that will read the (encrypted) data net senor off the coast and the flow of data in a form usable output.  I built a vi that can be used in a loop, a bit similar to the block of canned labview data acquisition that can be used to acquire data from products OR.

  There are many sophisticated (and secret) algorithms going on in the background which make sense data and translate them into a usable data table, but also configure the hardware itself. Accordingly the only final vi I prepared to distribute the client makes use of Subvi about 20. Almost none of these subvis could be ideally be reconverted in plain code in main vi, nor what I want to do this.

  The rules of the game is the following: I want to give him the block I created to use its own code, without him to see what's happening inside the vi.  I can deny him access to the block diagram/s, no problem, but I don't want to give him access to the subvis, to use, or even to know their names - preference they would be hidden or otherwise pre-compiled. Preferably I would just give him the main block only, perhaps with some support files that would be entirely opaque to him.

  Looking for advice on the best way to go. There is an elegant solution to this problem? For example, it would be better to compile the block as a .dll file, and then write a wrapper vi any?

  Have you thought of creating a packed library? You can also password protect your code. You can delete the distributed code block diagrams. You can use a combination of the above as well.

• Need some advice about the VPN between local Cisco router and remote Watchguard

  Hi all

  I am configuring a Cisco 887 to VPN router to a device of watchguard at the remote site.

  From what I understand, the VPN tunnel is in PLACE. I can ping to the remote server on the 192.168.110.0 of the network, but whenever I try to navigate to it on the local server, it wouldn't work.

  I ping the remote server via the IP address on the local server, but not on the Cisco router. Is - will this work as expected?

  --------------------------------------------------------------------------------------

  R5Router #sh crypto isakmp his

  IPv4 Crypto ISAKMP Security Association

  DST CBC conn-State id

  110.142.127.237 122.3.112.10 QM_IDLE 2045 ACTIVE

  IPv6 Crypto ISAKMP Security Association

  --------------------------------------------------------------------------------------

  R5Router #sh encryption session

  Current state of the session crypto

  Interface: Virtual-Access2

  The session state: down

  Peer: 122.3.112.10 port 500

  FLOW IPSEC: allowed ip 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed 1 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed 6 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 122.3.112.10 192.168.0.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  Interface: Dialer0

  The session state: UP-ACTIVE

  Peer: 122.3.112.10 port 500

  IKEv1 SA: local 110.142.127.237/500 remote 122.3.112.10/500 Active

  FLOW IPSEC: allowed ip 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 2, origin: card crypto

  FLOW IPSEC: allowed 1 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed 6 192.168.0.0/255.255.255.0 192.168.110.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  FLOW IPSEC: allowed ip host 122.3.112.10 192.168.0.0/255.255.255.0

  Active sAs: 0, origin: card crypto

  Crypto ACL 102, should really include only 1 line, that is to say:

  10 permit ip 192.168.0.0 0.0.0.255 192.168.110.0 0.0.0.255

  and you should have the image mirror on the remote end ACL line too.

  PLS, remove the remaining lines on 102 ACL ACL.

  I guess that the ACL 101 is NAT exemption, if it is pls include "deny ip 192.168.0.0 0.0.0.255 192.168.110.0 0.0.0.255" on top of your current line "license".

  Clear the tunnels as well as the NAT translation table after the changes described above.

• PS Newb needs help with resizing the image and print several sheet

  Hi, I am using PS CS3 to resize an image, I have so I can print to use as a map for a miniatures game.  I have no problem of scaling of the image to the appropriate size, but I can't understand how to print multiple image 8.5 x 11 sheets.  I thought I saw an option for such a procedure before, but maybe it was in another editing program.  If anyone has any ideas on how I could do this I would really appreciate hearing about them.  Thank you!

  Illustrator and InDesign are tiled printing, like CorelDraw. Photoshop, this title is not, but may be a few script for this. In your case, the simplest solution would be to save the file in PDF format and have Acrobat print a tiled (Page scaling of parameter in Acro print dialog box). You just need to make sure that your page corresponds to several pages. Unliek AI and ID, Acro chop only stuff based on standard paper sizes...

  Mylenium

• Need your advice and help

  I devastated m!
  I live in America, but I need all the help I can get!

  Last summer, I bought my first NEW Toshiba laptop, sure that he would be the BEST computer I've ever owned! Well, that was until the NEW HDD has not only three months later, making me lose ALL the images of my childhood! Ready to recover all these photos, I put off to send the laptop to Toshiba for repairs as my father and I worked for months to try to extract the data from a failed hard drive. We spent many hours and a lot of money, and nothing has worked. Resigned, I called Toshiba to get my hard drive replaced (my computer was under warranty). Although the first lady was unfriendly and rude, the case manager I talked after him was the image of professional, she apologized profusely and said: second day of air would be sent a box to pick up my computer! She promised that the repair would cost nothing, take only a week and returned the second day of the air! I was happy!

  Two days later, I registered for the box when he arrived, packed my computer and sent it to Toshiba. I received a call to let me know that they have received and a call a week later to say it had shipped and was heading towards me! It had to happen on Tuesday, so I stayed home all day not wanting to miss his arrival, imagine my surprise when not only did he not arrived Tuesday, he didn t happen several days after as well!

  On Friday, I was quite worried call Toshiba. When I explained that I would have received my computer now, they told me that UPS had rendered the computer at my door on Tuesday! My Doorbell never rang and was never asked to sign for a package! Toshiba said that they did not apply for a signature on my laptop $800! They said that it was the fault of UPS s and I should talk to them! So, either he was delivered and stolen or never delivered at all!

  When I called UPS, they apologized for the confusion and said that Toshiba would have to be the one to bring it to the missing point! Then I called once more where they told me there was nothing they could do and that I would have to file a police report and talk to Toshiba repair service. I been waiting for 45 minutes for service and nobody has ever said! When I finally hung up and called back case manager, I spent more than an hour on the phone, explaining that even if I understood that it was an opportunity very rare for Toshiba, I could not afford to spend hours waiting for a Department that did not, only to try to solve a problem that could have been avoided on Toshiba end of s if they requested a delivery signed on a very expensive item! And they would not have had to face this problem if they were not given a defective item in the first place! They told me to wait for Department of repairs to call and that I had to file a police report, provide documents and wait for Toshiba and UPS to hash things.

  Well, the repair Department has STILL not returned my call, although several messages have been sent to them to ask them to call me! I am a student and desperately need a computer to take care of the College work, taxes, planning and other! I can't afford the many months it will take to get this sorted out in addition to the EIGHT months that I have owned a computer brand new broken! I put t know what to do!

  My mother suggested that I use my prepaid Legal Service to resolve, but I d really rather not venture that disorder can anyone suggest a solution? It seems as if it was too rare an opportunity that Toshiba says it is, he n t be as big of a deal just replace my computer which should not have failed in the first place!

  Thank you very much
  Channing Trainor

  Hello

  Sorry to hear about all this.
  I would like to offer help, but you are in America, and I don't know how it works here.
  Maybe you should this post on the forum we Toshiba and chat about it with people who live in the United States.

  Here is the link - http://forums.toshiba.com/t5/Laptops/ct-p/c_laptops/tshb

  In any case, I recommend you contact Toshiba hotline and ask for help.
  They have accurate information about the provider of service and clarify this point with them. I also believe that each service provider has the opportunity to check all deliveries and to clarify the situation.

  I'll keep my fingers crossed for you!

• Need higher resolution of the image in the workspace

  How can I get the best image resolution in my workspace of 6 CS organization? I see a setting that says "complete." Are there more parameters? I need full resolution in the editing process.

  IMac 27 "OS 10.8.3

  Thanks in advance.

  Thomas

  Complete is the highest resolution. You can change the program to 100% of the size monitor if you want to see the highest resolution in native format and to get an overview of quality if you do not have a reference monitor. Change back to Fit while you work.

• need help to load the image from a xml file

  (Based on the example of Chapter 10, ActionScript 3.0 for ADOBE FLASH CS4, IPC)
  By using the 'setSong' function, I shoot with success of the < artist > child of my xml data, no problem. But I also have to display the jpg file in the < image > node and I meet a lot of difficulties. I tried adding more variables to the setSong function, but am frustrated. Someone could shine a little light and point this beginner in the right direction?

  function setSongs (): void {}
  for (var i = 0; i < 4; i ++) {}
  var artistText:String = songList_XML.song [i + songCount] .artist;
  Customizer var = this ["song" + (i + 1)] .artist;
  clipArtist.text = artistText;
  }
  }

  myXML:

  <? XML version = "1.0" encoding = "utf-8"? >
  < songlist >
  song <>
  < image id = "1" > images/dummyFace1.jpg < / image >
  < artist > first guy < / artist >
  < album > Aliquam neque dui, sold at, egestas nec, egestas dignissim, tortor. < / album >
  < / song >

  song <>
  < image id = "2" > images/dummyFace2.jpg < / image >
  < artist > second person < / artist >
  ante < album > Nam. Metus had integer and lacus accumsan commodo. < / album >
  < / song >

  song <>
  < image id = "3" > images/dummyFace3.jpg < / image >
  < artist > third Fellow < / artist >
  < album > Cras non sem vitae massa pharetra sold. Integer outbound < / album >
  < / song >

  song <>
  < image id = "4" > images/dummyFace4.jpg < / image >
  Fourth individual < artist > < / artist >
  < album > surpassing ullamcorper quam and ipsum. Aenean sed lacus sit amet leo so restore. < / album >
  < / song >
  < / songlist >

  :

  function setSongs (): void {}
  for (var i = 0; i)< 4;="" i++)="">
  var artistText:String = songList_XML.song [i + songCount] .artist;
  Customizer var = this ["song" + (i + 1)] .artist;
  clipArtist.text = artistText;

  var ldr:Loader = new Loader();

  var urlR:URLRequest = new URLRequest (image songList_XML.song [i + songCount]);

  LDR. Load (urlR);

  LDR.x = Whatever (i);

  LDR.y = whateverelse (i);

  addChild (ldr);

  }
  }

  myXML:

  
  
  
  images/dummyFace1.jpg
  First guy
  Aliquam neque dui, sold at, egestas nec, egestas dignissim, tortor.
  

  
  images/dummyFace2.jpg
  Second person
  Nam ante. Metus had integer and lacus accumsan commodo.
  

  
  images/dummyFace3.jpg
  Third Member
  CRAs non sem vitae massa pharetra sold. Integer is.
  

  
  images/dummyFace4.jpg
  Fourth person
  Surpassing ullamcorper quam and ipsum. Aenean sed lacus sit amet leo so restore.
  
  

• Need help/advice on the creation of custom character Style

  Hello comrades!

  I m doing a game using flash cs5 and HAVE 3.0.

  I want to give the player the option to costumize his character.

  Something like this ( http://www.flashninjaclan.com/zzz2832_Anime_Character_Generator.php ).

  After choosing his own style the player will save his character and he will use throughout the game.

  I had planned use drag - move action: Player f.ex.the is drag air style and drop it off at the head of the character.

  However, I n ' t´know how can I save the final result! I have not found a tutorial or document on this subject!

  Could you give me some advice/links?

  Thanks in advance!

  See you soon,.

  Eduardo

  You have 3 options here.

  I'll go from easy to hard:

  1. use a LocalSharedObject to record users decision like a flash, like this cookie the next time it runs your application the character will be always available

  or

  2. save the character under a beautiful string in a database that the user must connect when he starts the game.

  or

  3. use air instead of Flash, then you can write a file with the description of the character that it models to your site amenities AIR application directory

  The first method is by far the easiest.

  Regarding 'how to save the character', using a string representation.

  1st digit could be what he chooses, 2nd tshirt, 3 shoes, 4th wepon etc.

  For example, when he chooses the 4th head, the tshirt of the 7th, 9th place and the 3rd weapon, save "4793' in your local shared object chain and read it on the next time the user starts the application.

• On the partititon... need your advice

  Hi Master,

  This is the first question.

  I have a table with partition of beach on the data column. I have 3 partitions now. Jan, Feb, mar, now I wanted to insert data months apr. There is no partition. where are the data?

  a second

  I have a table with partition of beach on the data column. I have data with data of 1st, 2nd, 3rd, 4th month. then I inserted 6 months of data. Now, I wanted to store data 5th month? How is it possible?

  I have little knowledge about partitions. Please explain to me.

  Concerning

  AR

  And if you want to insert data apr translate APR score on-the-fly creation and insertion of data apr there you should use range partitioning.

  SY.

• Need your advice - the user name and roles

  We are the OEM deployment within our Organization.  There is a special requirement on business unit to have several names for the same person, with different roles.    Which means 'employee_1' will be 3 id for several roles such as employee_1_Administrator, employee_1_Operator, employee_1_Monitor!    Is - this recommended by Oracle? or it companies set up such a system? (I know it's technically feasible, but I'm confused as it is a best practice).

  Any suggestions or pointers are really appreciated.

  Vijay

  No, it sounds like a recipe for chaos for me I recommend several ROLES by user.  But if you have several users, they will constantly be logged in and out based on what targets that they manage and which kind of defeated the purpose of having a "Enterprise Manager" tool in my opinion.

  The way in which users EM are roles assigned, allows you to provide multiple roles functionality that can easily be revoked should change responsibilities.

  So create 3 roles:

  Administrator

  Operator

  Monitor

  Give the 3 roles employee_1

  I'd be interested to hear the conditions for this... but the only case that I heard in other companies is for a small number of people who have administrator-level privileges.  UserA was UserA account + userA_Admin.  Must not use their account "admin" for normal each daily tasks (management db, work planning, etc.) but only when necessary for higher level privileges.   Again, it is possible, but difficult.   Only 1 of about 40 clients that I worked with it.

• I need some advice for the Satellite L630/03

  Hi all

  I just bought my first Toshiba L630/037 (http://www.mytoshiba.com.au/products/notebooks/satellite/l630/psk04a-037001/specifications#details) and I'm really excited that I'm waiting to load for hours first 2 or if, after perform you a unboxing conversion it!
  He looks bloody awesome and I can't wait to start using it!

  You have a few questions:
  1. when I received it, the sticker that keeps the top down was already torn (as in a person already open).
  The clerk said that everything is fine with it, so we opened it to check that the main seal for the laptop has not been broken and that the adapter and cable was there. Now that I'm home and I have everything out, I noticed that I have no CD.
  Is that suppose to be right? I'm a bit confused because the last laptop that I bought a few of the installation CD and the drivers that came with it. In addition, is there something else I should be aware of that should have been in the box?
  All I have is the power cord, power adapter, manual, portable with battery already in it.

  2. in the purchase, there are already standard warranty 1 year that comes with the laptop. I noticed on the Toshiba site, you can buy an extended warranty. Should I buy now? Or can I get, say 1 week before the end of year 1?

  If anyone has useful tips or advice that would be greatly appreciated!

  See you soon!

  > I took everything out, I noticed that I have no CD.
  Yes, that's right. No CD is delivered pre-installed Toshiba Software is on the HARD drive and you can create a clean recovery disk! Please see the operating manual!

  > Should I buy now? Or can I get, say 1 week before the end of year 1?
  Well, as far as I know you don t need to buy the extended warranty immediately after the laptop was purchased

  I found this info:
  > Q: When can I buy the extended warranty?
  > A: the extended warranty is eligible to purchase, during the period of warranty the laptop
  http://www.MyToshiba.com.au/support/warranty/extended/FAQ

• Need some advice on the new computer from HP.

  I bought a new HP computer and it shipped just yesterday and delivery date is Thursday (12th).  I am new to HP computers, my other 2 desktops are Dell and Toshiba laptop of my wife. Laptop is Win 7 and desktop computers are Win XP. The most recent Win XP is:

  Windows XP Professional SP3 32-bit
  Intel Core 2 CPU 6300 @ 1.86GHz
  4 GB of Ram.

  Don't laugh, my other Dell XP desktop computer is simple core!  Laughing out loud

  These 2 computers will retire after I receive and configure the HP computer:

  HP Pavilion HPE h8 desktop PC - 1360t
  Windows 7 Home Premium 64
  3rd generation Intel Core i7-3770 to processor quad-core [3.4 GHz, 8 MB of shared cache]
  10GB DDR3 1333 MHz SDRAM [3 DIMMS]
  SATA 1 TB hard drive 7200 RPM.

  Do you think I'll note and difference? (I'm kidding) Laughing out loud

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  3. the computer come with Service Pack 1 installed?

  HP Pavilion HPE h8 desktop PC - 1360t
  Win 7 x 64 ~ ~ SP1, IE11 ~ ~ FF i7 3770 3.40 GHz ~ 10 GB Ram ~ NIS 2014

  Congratulations for the excellent choice.

  1. is there a procedure for the implementation of the new computer? I'll be the only one to use it.

  With your experience, you probably won't have a problem. I strongly support you haven't set a password on it.

  You can always add a password later.

  2. I also want to do a recovery disk. Can I do this after having my computer account?

  Configuration of the computer and do what is required to complete the user account. It is advisable to only use DVD + R media. You will probably need 3-4 DVD + R and the usual CD - R disc repair system.

  3. the computer come with Service Pack 1 installed? This date should be. There will be updates.

• I want to convert my logic large table - multiply in a library called the faster, need some advice on the code of C.

  Hello everyone,

  In my VI, I have a code that looks like this-

  

  Each table is 2D size 512 by 640.  The time it takes to run this whole chain is approximately 28miliseconds. Seems fast, but I need to cut it to about 10ms.  I tried to make the tables 1 d, but saves only about 2 ms.  I even tried to cut the table 1 d in half and duplicate the code and then combine them at the end (a half-hearted attempt at optimizing multi-core) and who showed zero improvement...

  I guess my last option (please let me know if there are other options) is to compile a DLL that will do this for me.

  I'm a bit confused on how I'm supposed to implement table multiplies in C, however.

  What I do run for(;;) a loop and multiply each item one by one?  It seems that that would be much slower than anything done LabView in-house to do this multiplication of cross-checking.

  Thank you!!

  MK

  If you don't know how you would in C, I don't know why you think that move it to a DLL will make it faster. In C, you will need to either make operations sequentially in a loop for, as you mentioned, or find a library for parallelization of this operation. There is no built-in c function to multiply the tables.

  One thing you might try in your LabVIEW code is to multiply it in a loop for, where you make an addition to each iteration and store the result in a shift register. Also remember the current power of the original array into a shift register. Which should reduce the number of copies of the table you need, which can speed up to turn the code. So, you initialize it the 'sum' with the first table shift register and the shift register current electric table with the result of the subtraction (or, Alternatively, with a table of the same size, filled with 1, according to the order in which you want to do things). Multiply this table by the first multiplier, add it to the sum, and multiply the power of the original (subtraction) table, storing to the power shift register. Repeat until you are finished.