needed to install updates and apply to my system
After problems with the character keys to jump, boot errors in start I had IT (repair shop) work to fix my HP laptop. Seems to have been that a problem with one of MS updates so I am now careful to apply to my system to Vista sp2. Example, update for vista security (kb2556532) what are these numbers showing? Watch 10 updates, cannot determine which install on my system, which first, etc...
I read so many problems on windows system, I get a feeling nauscous! My next purchase will be a Mac.... maybe then.
Hello
Important updates provide significant benefits, such as improved security and reliability. You can also set Windows to automatically install recommended updates, which can address non-critical problems and help enhance your computing experience. Optional updates are not downloaded or installed automatically.
See also: http://windows.microsoft.com/en-US/windows-vista/Updates-frequently-asked-questions
Tags: Windows
Similar Questions
-
Hi all
original title: install said 'successful', however, same updates needs to install over and over again.Hope everyone is doing well. This just happened this morning and try to find solutions but seems I can't find the right one.So I got the "shield of Microsoft", letting me know that I have some new updates available.1. Update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)2. Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)3 security update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)I installed the following updates and he "succeeded". A few minutes later, the shield pops up again asking me to install the SAME updates. I did it again and once more "managed". A few minutes later, the shield popped up again (same updates). This time, I installed it, my computer re-setting, however, the same updates need to be installed again. I'm ignoring the shield right now.Thoughts on that? This means - it is NOT installed correctly? How can I fix it?I have a netbook, Windows XP laptop.Thank you.Hello
It seems to be a mess of some sort on the server. Until that which is high to the square correctly, follow these steps.
We will empty the download folder.
Start > typeRegeditdans cmd & press enter
type in
net stop wuauservOUTPUT
NB. which temporarily stops the automatic windows update service. Your next restart of Windows, it will be again.
Go to Windows Explorer.
Look on your system (usually C) drive and see the name of the Windows folder. Like Windows or WINNT.
Edit following as appropriate.
If your Windows folder is C:\Windows. Look at this file
C:\Windows\SoftwareDistribution\downloadIf you find files in there, remove them. This file is where the Windows Update files are stored downloads.
-
client code without 0328990515
my laptop has a problem and needs to be updated and re - install the adobe photoshop cs6 extended. But after running the Installer "initalling", nothing happened. Cannot re - install the adobe photoshop cs6 extended.
Need help urgent as it is essential for my study.
Thank you
Uninstall ps cs6.
Run the vacuum cleaner (http://www.adobe.com/support/contact/cscleanertool.html).
you restart computer.
Reinstall the cs6 ext ps.
-
Update icon shows in the lower tray instructing need to installed updates. The same updates keep the installation time and again, but the icon remains.
Hello Tornado1954,
Follow the steps in the article to reset the Windows update components and check if the problem persists.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
I hope this helps.
-
"Cannot install update and the error occurred ' iOS 9.3.2
Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?
Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.
-
error code 0 x 80246007 appears when you try to install updates and the windows store purchases.
any help appreciated
Original title: error code 0 x 80246007
Hello
Please try the patches for Windows Updates:And for store related issues, use Troubleshooting Windows App tool:Hope this helps, good luck :) -
I start the download for cs5 and it comes back with an error that it can not install updates. and try later. I've tried about 6 times
Hello Tracy,.
How exactly you are trying to download and install updates?
Is it a mac or windows?
Manually download CS5 CS5 download products
Download the updates manually CS5 for Windows here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Windows
Download the updates manually CS5 for Mac here: https://www.adobe.com/support/downloads/product.jsp?product=39&platform=Macintosh
Concerning
Jitendra
-
How can I fix missing MSVCP110.dll Adobe Premiere Elements on win 10 after installed update. Impossible to correct the problem after reinstalling, deleting and reinstalling.
Hello
Please visit https://helpx.adobe.com/creative-cloud/kb/missing-msvcp110dll.html
Hope that helps!
Kind regards
Sheena
-
Could not install updates and get error Codes 652 and 8007065 what is happening?
Updates impossible to install and get the following error 652 and 8007065 codes
Do I need these updates for Windows Office, word and works?
Hi SallyWebster,
· What are the updates you are trying to install?
· What operating system is installed on your computer?
Method 1: Microsoft has released a new "Fix it" solution that should automatically solve your problems with Windows Update. Click on the link below and follow the instructions.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Method 2: Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the updates.
You cannot install some programs or updates
http://support.Microsoft.com/kb/822798
Method 3: You can download standalone update packages (you want to install) and then try to install them manually. Check if you get the same error message.
Method 4: I recommend you put your computer in a State of clean boot the try to install updates.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
-
I am trying to install a Netgear router and when I click the installer, I get the MDM_Util.exe closed unexpectedly. Please click here for the update solve the problem. I did all the updates and it still does not work. More whenever I have him try again, there is an another important update needs to happen - I feel like this could be a virus...
I am trying to install a Netgear router and when I click the installer, I get the MDM_Util.exe closed unexpectedly. Please click here for the update solve the problem.
And did you contact Netgear Support? Is there the Netgear updates available (for example, as the firmware update)?
CF. http://forum1.netgear.com/showthread.php?t=19370
CF. http://forum1.netgear.com/showthread.php?t=20347 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
original title: I continue to receive updates for Windows. Updates begin to install fail, updates to day is awarded automatically installation and then the cycle starts again.
This process takes about an hour, during which I can't use the laptop.
Hello
· Update is causing the problem?
· You get the error message?
Method 1:
Try to install the update to the clean boot and check if it helps.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135/en-us
Note: Don't forget to start your machine in normal mode by following step 7 of the link.
Method 2:
You can try temporarily turning on all security software and then try the updates again.
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
Method 3:
Also refer to this article and check if it helps:
Problems with installing updates
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates
-
I can not install updates and no error message appears, please help
I tried to install the updates and the computer will restart itself, try to install them and then say that the installation has failed. No error message and none of the solutions proposed in the FAQs apply to my situation. My computer did this for several months. Anyone know how I can fix this problem?
Hello
you post your question in the wrong forum
______________________________________
see if that helps to fix:
How to reset the Windows Update components?
There is also an automatic 'fix - it' here
http://support.Microsoft.com/kb/971058
Also, try to put the KB numbers in the search on the link below and then manually download the
http://www.Microsoft.com/downloads/en/default.aspx
or please repost your question in the correct windows update forum
http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all
-
Software-need to install updates? As of the
This software will update am I supposed to install? I bought my suite Adobe in may 2013 and all the updates that are listed have been dated 2012. Do I still need to install the updates anyway?
It is not necessary that you install updates, but, if you are away from all the necessary features or having a problem, you must install the updates.
It is not uncommon to buy software that was created prior to your purchase. updates are not usually rolled in recent purchases by any provider of software that I know - including adobe.
-
Operating instructions: how to manually install updates and difficulty stucked relies
OK I finally got, and here is the update method. It is completely safe and if a problem occurs, it will stop and you can restart your TPT as always.
Here are the steps :
1) you have to download the firmware here:
http://download.Lenovo.com/slates/think/tablet1/
(seems its not available and they were fired 0075 day, but it will be word for any updates)
Improtant : If you're on 0052, you must manually install 60, then 65 and 75. In other words, you cannot go from 60 to 75.
2) you have to paste the firmware in .zip format (exactly as you download it) on your SD card.
3) restart your TPT. When the screen lights up, start pressing Volume up for several times. You will see that you go to the recovery image, she writes. Wait...
4) now that you are in recovery mode. with press volume up and down, you can navigate and pressing the button walk / stop, you enter the menu. Choose "install the update from SD card" and choose your firmware (with the sequence) .and wait device finish its work.
Fact!
(Edit #1: If you're stuck on an update and the update of your system does not work and also you do not use the manual update - which is not harmful at all - you can follow this method: for example, you're at 0052 - who stucked as many people on this build - if you manually install 0060) , your TPT will update to 0060, DO by WHICH as long AS. just try a few other goofy, which is not the next generation. TPT will try to update it will stop because of the mistake of sequence, but it will fix the update of the OTA system, fun)
TNX to Hongkong,
0075_US link:
http://download.Lenovo.com/slates/think/tablet1/ThinkPadTablet_A310_02_0037_0075_US.zip -
will not install updates and can't download anything on Web sites
Windows Update Error 80070002
ccL60U.dll was not found.
Mfc71.dll is not found = ATC Voicepack SDK
HpQuickplay has stopped working = ATC Voicepack SDK
HPRun has stopped working = ATC Voicepack SDI tried every suggesstions on the microsoft Web site, did not work...
ATC Voicepack SDK (whatever that is)
Refers to a Flight Simulator game maybe?
If you forgot to mention what Windows operating system you are using and any other relevant information. You say you've tried everything, so you review the log SURT?
Description of the update of the system for Windows Vista tool
http://support.Microsoft.com/kb/947821
0 X 80070002 - ERROR_FILE_NOT_FOUNDYou receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
http://support.Microsoft.com/kb/910336Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
http://support.Microsoft.com/kb/956698Windows Update error 80070002
http://Windows.Microsoft.com/en-us/Windows7/Windows-Update-Error-80070002Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
Maybe you are looking for
-
Tecra 8200 - what computer laptop model number should I?
All topCan someone tell me how do I know what model I have? I try to download the drivers for my computer, but am not sure which series / model it is. I have the following information on the basis of the machine: TOSIBA Tecra 8200Model No.: PT820E-05
-
My satellite will not turn on at all - its just dead
I have a satellite, it is around the age of 18 months. I used it fine a couple of days, when I tried to turn on today absolutely nothing happened! The power light is on when it is connected to the network, but when I press the power button that does
-
Satellite A300D-11 s - how to share memory card video RAM
I want to know if it s a solution other than RAM memory on the video card on Satellite A300d-11?I use XP and I have 2 GB of Ram For games, what is the best Vista or XP?
-
HP-15ac044TU: bluetooth doesn't work does not correctly
I have laptop model HP-15ac044TU and my product number is M9U99PA #ACJ. I'm not able to use my music YET - M1 correctly bluetooth wireless device with bluetooth to my cell phone. Sometimes it connect, but sometimes not. so, I have to remove my paired
-
Officeject 6600 will not accept a computer 2d for scanning to pc wireless
I used to have my PC Envy and my setup of the laptop for wireless scan-to-pc. Had a problem with my desktop computer and had to replace the operating system. Now, I can scan my laptop, but not my computer desk... error message when I try to scan to t