NetBook HP Mini

Hello

I have a HP Mini Netbook and the weekend I went to for use and it works but after that I had opened a session in the screen became black outside the task down with a couple of programs languished to her.

It won't let me open anything and I have to "Ctr Alt Del" to be able to turn it off again.

Help, please!

Emma

Hi Emma,

See if you can access "Safe Mode" and then run windows System Restore as follows.

Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  When it has loaded, on the Start Menu, click principally made programs, accessories, click System Tools and run the system restore.  Choose a restore point prior to the issuance and then proceed to the restoration.  When you have finished, I hope that Windows restarts normally.

Kind regards

DP - K

Tags: Notebooks

Similar Questions

  • NetBook, HP Mini 210-3000ew vs Windows 8, NEED HELP

    Hello

    I have a few questions. At first sorry for my English, I know it's horrible; D.

    1. I want to install windows on my Hp Mini 210-3000ew netbook 8. For an application on this OS, I need to have the screen resolution 1024 x 768, while my normal screen resolution is 1024 x 600 (recommended by the manufacturer). I can go to regedit and change the 'Display1_DownScalingSupported' value to 1, so I'll be able to adjust my screen resolution of 1024 x 768, but I don't know if this operation won't spoil/break my screen/matrix. What are the chances that my screen/matrix can break down as a result of this operation? Or maybe after a certain period of time to aid higher than the recommended resolution that I will get a few dead pixels or something like that? Is - this windows 8 after changing the present resolution be ok? And can I install it with screen resolution 1024 x 600 or Setup will be out of reach of the screen?

    2. I've been looking for the drivers for windows Web site 8 for Hp Mini 210-3000ew, but I only found drivers for windows 7. They are compatible with windows 8? Or I do not need to install any drivers for my netbook with windows in all 8?

    I am happy for any help. Thanks to advice.

    As far as I know, Windows 7 Starter is an OEM product only and the only source is from the supplier. Microsoft doesn't have a link to download the image.

  • Problem with Netbook HP Mini 1000

    Hello. I had my HP Mini 1000 for almost 2 years and all of a sudden, I have this problem. It lights up. However, all right. The charger works fine and the battery is new, whereas I have change every 6 months. It's just the netbook that won't turn on. It was working fine last night when my sister was too.

    What should I do? What I need to get a new battery or is my netbook really broken and I need to buy a new one?

    Hello.

    If you have tried the troubleshooting proposed above steps and if this does not help, then I take you recommend to visit authorized for netbooks HP service center.

    If you live in the United States - you can find them here.

    If you live outside the us. -You can find information about your local site of HP (www.hp.com) or you can contact HP by chat or phone support and ask them to guide you toward the center of HP service due to hardware problem

  • re - setter Netbook hp mini 110

    Nice day.. I have a mini netbook 110 HP, but my problem is that they have a password and I didn't know what is the password... is there a re-setter password fo this? Help me please...

    Unit: netbook computer hp mini 110

    S / N:CNU942226R

    Hello

    If it is a power on password, enter: e9lov777gb (3rd character is a lowercase L)

    Kind regards

    DP - K

  • NetBook HP Mini series 4CZ048138J white screen

    I want to tanya.notebook HP Mini Series 4CZ048138J I serve, first of all I want to install new windows because the old windows broken, so the data in my document I do not secure order to format (before I install new windows), but after I finished I moved the data and restart the white screen and the power button is off > solution 2detik indication of managers while flash bios already made , but do not get an appropriate > please give me a solution and send keemail to all what is needed for this series to Flash the bios if its

    [Personal information]

    I did the bios flash, check memory DDR is always ok, > if there is a correct way to's please send it to me for this series as well as the flash bios flash tool needed

    {Information}

  • HP Mini 311: reset the BIOS password for netbook HP Mini 311 SN: CNF0079R1C

    can't seem to guess the password. Help?

    Serial number: [personal information deleted]

    @Defster

    Enter 40921460

    REO

    I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.

  • NetBook HP Mini 110 black: I forgot bios password

    Password check failed
    fatal error... are stopped
    CNU942228N

    plsss help me...

    I forgot my passwod

    Hello

    Please try (all lower case)

    e9lov777u9

    Kind regards.

  • HP Mini 210 Netbook headphone Audio Combi Socket Port

    NetBook HP Mini 210 has a SINGLE taken 4-pole (PLUG) 3.5 mm headphones Audio Combo.  All the headsets have TWO 3.5 mm 3-pole (TRS) care; One for headphones and a separate for the Microphone.

    OK, after a few tries, the solution is now obvious!

    The pinout of the connector 4-pole Combo does not follow the AV cable (standard), where the body of the plug is on the ground

    It's more like the Canon AV Cable camcorder where the Ring2 is the Foundation and the body is the Mic (video on the Canon cable). Below specified connections to work perfectly:

    4 pole socket Headphone jack. MIC Jack                          

    Trick trick (left Audio)

    1 ring (right Audio)

    Ring 2                                   Body                               Body

    Body                                                                             Tip + Ring

    Make sure that you use a 4-pole plug bodied plastic because the body is the Mic (Live) connection and could cause interference if touched

    I hope this help those who meet this problem.

  • WLAN Driver XP problem on HP Mini 110 3504TU

    Hi all

    I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU

    "Network controller"?

    Hardware ID:

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01

    PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
    PCI\VEN_14E4 & DEV_4727 & CC_028000
    PCI\VEN_14E4 & DEV_4727 & CC_0280

    Product number: XV876PA #UUF

    SN: {information}

    My Google search results: WiFi chipset is Broadcom. I tried ALL my links (link to the official driver HP) google search result, but just not getting anything,

    I tried anyway install all drivers (search for my googling) downloaded files

    the way normal installation sequence and manual, via the "Update driver" Menu on Device Manager

    but no anymatches found.

    Thanks in advance before...

    Kind regards

    Dave. N

    Hi, Dave:

    This driver should work.

    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=3688868&swItem=ob-101092-1&prodNameId=3688870&swEnvOID=1093&swLang=13&taskId=135&mode=3

  • Can I use my Mini 200 for anything without recovery disk?

    Hello

    I ve had 200-4200 Mini. A few months back I had a hard drive crash and another was sent by the warranty. I m abroad, so he was sent to my friend, who sent me to the Nicaragua. The drive arrived, BUT pick it up USB does not stick. (they came separately on the post, so he posted them me separately also)... 7 weeks waiting for the post... I think that it will not happen before leaving the country in 6 days and continue the journey.

    -> I m not a computer person, so questions may be a little weird

    Is it possible to do SOMETHING with my Mini (except put this message and send it back to europe)? I guess there is no chance to perform a recovery by the USB connection to another computer and to address online? ....

    Thank you

    Mayor

    When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

    I can assume that you are referring to the computer Netbook HP Mini 200-4200ea-p/n B8H26EA , but this is only a guess, that there are about 73 models Mini 200-4200 available.

    It may be possible to download a Windows 7 ISO from Digital River, a Microsoft hosting partner and put a boot image on a USB key. Please see this HP forum thread titled "How to install Windows 7 without the disc" for instructions on the download and create a bootable Windows 7 support. The only problem I see is there doesn't seem to be a 'Windows Starter' image available. A side note... you can install any version you want, on a trial basis... you would have a full 30 days to use Windows until you enter a valid key. This will put you on for the moment.

    Please send Bravo

  • Need advice replaces the screen HP Mini 2102

    Hey all,.

    I'm fixing a netbook HP Mini 2102 which was abandoned on the ground. The netbook works fine, except that now the screen is a little blurry and washed on the right side. Generally, when a computer screen is upward, trying to replace the converter display card, as was the case with a machine to HP Pavilion dv9000 I fixed recently.

    However, after dismatling the computer, I found no such ups on the screen, and after consultation with an HP support assistant very useful during a session of live chat who informed me that it is not a separate inverter Board available for purchase, I have come to believe that I need to replace the entire screen.

    If I'm not mistaken, the LCD part number is 589649-001 for this particular model that I am repairing. I created this post to confirm that the ups on this Mini Board can be replaced, and I need to replace the entire LCD screen - less camera, bezel and hinge, which all work fine - in order to solve the display problem.

    If you have any other suggestions as to what part I need, or if I have to take a completely different approach to the repair, please let me know before ordering the part of LCD screen.

    "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

    Hello

    You are right, you can save money simply select the good parts. I think not much.

    Good luck.

  • How to make a USB bootable for HP Mini 1116RN?

    I have a netbook HP Mini 1000 or HP Mini 1116NR. It displays the options of f10 and f9 and that's it. I know I have to reconfigure the USB but I don't know to what or what file to put it in the USB port. What I want to do, it's the laptop restore to the factory settings. There are two options on the black screen and the first does not work it says disc error. The second it starts but it keeps loading. I don' t have the disk for setting and the laptop does not have a disk drive.

    Hello

    I suggest that you contact HP support to better support on the issue.

  • Recovery Manager uninstalled on HP Mini 110-3131dx

    I accidentally uninstalled the Recovery Manager HP on my HP Mini 110-3131dx from my netbook has been slow.

    Now I'm trying to reset to factory settings and I'm not able to determine how to reinstall the Recovery Manager.

    When I start in using F11 Recovery Manager, all of the options except windows is disabled restore and restore windows has only recent restore points which are useless.

    Can someone indicate to me to the right link to download the Recovery Manager. I couldn't find installable upgrade

    Here are the specs you computer Netbook HP Mini 110-3131dx. According to the specification, this model left the factory with Windows 7 Starter 32 bit installed. HP provides no downloads of the HP Recovery Manager, HP Recovery partiton or HP recovery media. At this point, you have several options available to you;

    Backup all your personal data before all the instructions below.

    (1) Please mark the 'Active' HP Recovery partition by selecting "Mark Partition as Active" using the Windows Disk Management Console. See HP - partitioning and names of hard drives (Windows 7) for more information on using the Windows Disk Management Console. After your computer restarts, you should be presented with the option to return the computer to a factory condition.

    (2) Please use the support of HP recovery, you created earlier to return the computer to a factory State.

    (3) If you create this media, please see Windows 7 32 b recovery USB-Kit or contact assistance from official HP through the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

    (4), if you can still read the Windows product key of 25 characters on the COA Microsoft attached to your computer, you can also install Windows 7 Starter by using this key. Please see "how to install Windows 7 without the disc" to get instructions on how to download Windows 7, create the installation media and install Windows 7 using the product key 25 character of the COA Microsoft on your computer. This method will not install HP customizations or value-added software and you will have to manually install all drivers of the PC HP Mini 110-3131dx drivers page.

    Windows 7 SP1 can be found HERE and HERE. (Download the Windows 7 ISO)

    Link to "ei.cfg removal utility" . (Download and use to allow you to install Windows 7 Starter)

    Direct link to Windows 7 USB/DVD Download tool. (Use to create ISO support)

    If you have any other questions, feel free to ask.

    Please click the 'Thumbs Up' white LAURELS to show your appreciation

  • HP mini 210 1040eh: a 10.8V or a 11.8V battery

    Hello!

    I have my netbook (hp mini 210 1040eh) years. I change the battery because that primary is not working properly. It has a characteristic of 10.8V. I was looking for a replacement with the largest capacity (5600mAh) and especially found only 11.1V.

    If I buy one with 11.1V it will make problems for my netbook?

    Thanks in advance for the help!

    Hello @moni17

    Welcome to the Forums of HP Support!

    I have included the maintenance and care for your laptop computer guide. Inside, it shows compatible spare parts. Everything that is not on the list has not been tested to work with the material and could cause potential problems.  HP Mini 2102, HP Mini 210 and Mini 210 - Maintenance and Service Guide Compaq

    If you use a power adapter that charges to a higher voltage, it will probably translate into a higher level of current within the computer, that will turn warmer at the very least.

    I hope this helps.

  • HP Mini 311 clean install

    Hello

    I'm doing a clean install on Netbook HP Mini 311 Series.  I have looked on the HP support page and did not find the SATA driver.

    Anyone know where I could find it?

    Thank you

    Found.

    http://www.nvidia.com/object/nforce_winxp_15.46_ion.html

Maybe you are looking for

  • all my files were changed to an extension "of ink", how can I restore or difficulty?

    help me remove the "ink" I can't open these files or programs...

  • Windows Media Player disappeared?

    The night last WMP worked as expected - today I'm going to open it (music on the "dock" icon - then I tried to start) and nothing happens - t A THING.  I can 'find' when I search workstation (or what passes for it in VISTA) but can't do anything.  An

  • I have a problem with Actionscript 3.0!

    I'm a beginner, so any help would be appreciated even if the solution is very simple.I got a preloader on AS 2.0 and it worked correctly with the following code:var program: Main = new hand (MovieClip (root));addChild (program);When I moved in AS 3.0

  • Export from Adobe Premiere using extendscript

    Hello!I'm trying to understand how the exportTimeline() function works.  So far I managed to import the files and add them to a sequence.  Now I want to export the movie as a Quicktime movie.  Finally, I want to be able to define the points of beginn

  • ESX host for a virtual machine specific?

    An ESX (out of 3) host in a cluster has a physique more NICWe would like to place a special virtual machine on the ESX host.  Is it possible to attribute this VM to this particular host?  Needless to say, if there is a failure and that the VM is prop