Netflix DAB the problem has been fixed?
I noticed a lot of discussion on a problem I had with Netflix using my Sony BDP-S380 reading. As I watch the random programs I get constant stamp every few minutes. It may start immediately or later in the program when I first got interested in the program - which is very annoying.
I have concluded, as others have on the discussion, Sony servers must be the problem. I observed impeccable look using a laptop while getting DAB constant with the unit Sony - both at the same time on the same connection, the same program at the same time in the program. All other aspects of my blue-ray player work as expected. I even tried a borrowed device from ROKU replacing the Sony and observed no problems with my home network, my network ISP or Netflix. I must therefore conclude a Sony problem, so the question.
Should I trash the Sony and purchase a non-Sony product?
The unit requires a minimum speed of 2.5 Mbps or higher for videos in definition standard and 10 Mbps or higher for videos high definition. Go to www.2wire.com to check the speed of your network.
Make sure that the drive is up to date with the latest version of the firmware. The latest version of the system software can improve the stability of the Internet. The version of firmware available for your drive is M06. R.0624.
This problem occurs only with Netflix?
To learn more about this problem simply click on the link below.
If my post answered your question, please mark it as an "accepted Solution".
Tags: Sony Products
Similar Questions
-
I have a pc running Windows 7 64 bit. I have the latest Firefox V 10.0.1, automatically updated several days ago. Everything was fine until about an hour before, when I launched Firefox and all the Favicons for my favorites are blank dotted squares. I checked this forum and found that this problem should be fixed at 10 V. well, he's back.
What is the solution?
I can understand why the favicons have been lost. Earlier today, I ran the story of Vipre Antivirus to address another question I've had. Who may have somehow caused the favicons to clear.
Thanks cor - el for your suggestion. I ran of CheckPlaces and selected 'Reload favicons. He charged more, but not all. I also discovered that just open the bookmark, the favicon for the site gets reloaded. So those CheckPlaces cannot charge, I can recharge by simply opening the bookmark.
Maybe someone can explain to me why the history cleaner wiped out the first bookmark favicons.
-
The https://support.mozilla.org/questions/959992
This has already been done, but he still plays for some downloads of mp3, mp3 instead of ask me where to save the file.
Is there a way to fix this?Ah yes, I remember now.
From 26 of Firefox, Firefox can also use DirectShow to play MP3s natively in the browser. This added support for Windows XP handle the MPEG encoded media. So you will also need to disable this, too. I'll add that as step 4:
(1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.
(2) in the filter box, type or paste media and make a pause so that the list is filtered
(3) double-click on media.windows - media - foundation.enabled to change its value from true to false.
(4) double click on media.directshow.enabled to change its value from true to false.
-
How can I publish that the problem has been resolved?
How can I select RESOLVED?
You can post in a thread that wrote you that you consider the post a person brought the solution.
In a thread only the initial post didn't accept it as a Solution in the bottom of the post.
Click the accept as solution in the post that you consider to be the solution.
-
The bug that erases the data on macs has been fixed?
The bug that erases the data on macs has been fixed?
The update in question has been removed from the distribution. There is a new update which solves the problem. When you are prompted for the update, you should install it as usual members of creative cloud. If you have problems with the update, please contact customer support.
Alternatively, you can refer to this blog for more details:
http://blogs.Adobe.com/adobecare/2016/02/12/creative-cloud-desktop-on-Mac-update-issue/
-
Since the firmware has been updated a couple of weeks, my air 2 canned disconnection from the wifi ipad. And if she's not be disconnected it asks the router to renew the lease every few minutes. Sometimes I can't the internet connection, other times I have connection, but used to play embedded videos. I have to turn the ipad works to recover.
In addition, my ipad think that the ip address is 127, but my router it's 115!
I tried BT, but British users will know it is terrible, they are.
Anyone with problems and suggestions? I tried everything until and including resetting the network settings. I'm sure it's the router.
Hello
If you can afford to buy your own router this will work much better
I use a Netgear without problems 6300rv & double speed
Works even at the top of the long garden.
If you are not bound to bt try Plusnet based in Sheffield
Very good at solving problems.
See you soon
Brian
-
I have problems with Windows7 Home Premium and WWII CFS joystick operation. I get a message from gibberish, saying that the controller has been changed. I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file. Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either. Any suggestion would be appreciated.
Thank you
Hi Bob,
You can consult the following links of wire and check if it helps.
Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?
With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium
Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
-
How to fix a download that is "a supported file type not or because the file has been damaged"
I downloaded files from an e-mail to SAVE in the Documents and when I went to OPEN it with ADOBE READER, I received a message that "Adobe Reader cannot open this file because it is not a type of file supported or because the file has been damaged (e.g. He was sent as an attachment to e-mail and has not been correctly decoded. I'm a novice at this and do not understand really that. What can I do to fix this so I can play this file? Can you help me?
Nope... I'm not confused.
MP4 is a film format and has nothing to do with
Adobe Reader.You need an application that can read a MP4 video file.
The free VLC Media Player may be worth a try:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7)
(the name of the file to download is: vlc - 2.0.1 - win32.exe)When you have installed... VLC right click of your MP4
file and choose the menu... Play with VLC
Media Player.Information on creating a file association...
Right-click a file... in this case a MP4... and the
menu... Choose... Properties / change button... Choose
the program that you want to use (VLC Media Player) and
Click on... OK / apply / OK.What does that make VLC Media Player default
program for MP4 files.The next time you click left a MP4 file... VLC expected
start and play the file.Let's recap...
Since the MP4s are downloaded on the net...
they are not attachments and my previous instructions
on... File / save attachments... do not apply. -
problem of pirate?
We received a message from windows live saying the acct has been hi-jacked by a hacker and they wanted our mobile phone # send a text msg to solve the problem. We have not so much text msging and then they want all sorts of personal information (name, DOB, address, e-mail addresses, etc.) and we do not want to do that. is this a legitimate windows msg and is it possible that I can call someone from microsoft was finishing speaking? Thank you.
Hello
That sounds like a SCAM don't respond so not! Unless you have launched the contact of its likely someone
I'm trying in fact to steal your account and your identity. If your account has been compromised, see the
below.Unfortunately the answers is a site of support of peers supported and has no real influence
with Windows Live.Check with Windows Live Support and Forums
Windows Live Mail Forums
http://www.windowslivehelp.com/forums.aspx?ProductID=15Windows Live Solutions
http://www.windowslivehelp.com/solutions.aspx?ProductID=15Windows Live Solution Center
http://www.windowslivehelp.com/Compromised account - unauthorized account access
http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.
Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.
Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.
Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)
Beginning physical memory dump
Total physical memory dump. Contact technical support for further assistance group.
Hi fernandomventura,
Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.
If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue. Then get any drivers\software update for the device.
Step 2: Follow the steps mentioned in the articles below which deals with a similar question
General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".
http://support.Microsoft.com/kb/945658/
You receive a random "0x0000008E" error message on a blue screen in Windows XP
http://support.Microsoft.com/kb/827663
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Original title: when I turn on the computer.
the screen shows "a problem has been detected and windows has shut down to avoid damaging your computor.
Hi Cjdaniello,
· Did you do changes on the computer before the show?
Follow the suggestions below for a possible solution:
Step 1: Start in safe mode and check if the problem persists.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode, you can put your system to boot (in normal mode) to solve the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.
I hope this helps.
-
Adobe CC - I thougth the import problems have been fixed?
I've been away from Photo editing for a few months and last year I missed the update that created all this tumult on the import screen changing. I had not updated and waited until everything has been fixed. And I felt sure this year upgraded to the latest version.
So today, I ran the last brilliant own LR and tried to copy and import images from my attached 3 USB card reader.
It took me back to a very old version of LR... He read the card to a crawl, and he drew thumbnails very... very... slowly. Now, it's a 32 GB card with like 16 GB of images on there but still. 3 months ago this version would have whistled in these files and presented the 'new' thumbnails Now lightroom runs very well, very zippy. Just import and card reader.
Then, I thought that maybe it was a Windows-USB-player thing. I closed lightroom and copied the files via windows Explorer. He copied like 2 GB in no time at all.
So I'm happy, they kept the interface, but which gives import / copy screen and process? All solutions?
Thank you
BJBBJB1Have you tried to disable the GPU in your Lightroom preferences?
-
Hi I had CS 5.5 Student edition (download no CD), but then the hard drive of my computer is dead. My computer has been "fixed", but was completely wiped out. I bought a new computer and want to download again - one question - I can't find a way to download the edition of students anywhere on the site, do I just download the normal edition? Two - question because my computer was wiped out how to uninstall / disable one I already downloaded? Because you get only 2 total downloads is that correct? I want to
Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html
Concerning
Megha Rawat
-
Hello, I have a problem and cannot complete the installation of the creative cloud, signature of the photographer, has been convfirmado and I can not download some applications, the latest CLOUDS INSTALLATION GIVES ERROR 201, I DO NOT KNOW HOW to SOLVE IT MORE.
Error 201 & 205 & 206 & 207 or several U43 errors
-https://helpx.adobe.com/creative-cloud/kb/download-update-errors.html
-
I saw in the previous discussion, that InDesign in CC2015 police problem has been resolved by setting to "search the entire font name" but I can't find any place to select this setting. Pleae advise!
Look at the top of this thread:
Maybe you are looking for
-
I NEED FIRE FOX IN ENGLISH, I DIDN'T ASK IT IN HEBREW
-
HP officejet pro 8100 not review or color printing.
My 8100 Officejet Pro won't recognize color when you try to print from my pictures in Windows 8.1. I've done all the checks... ok of ink, grayscale printing is turned off, blackonly is disabled, deleted the program and resarted from scratch with disc
-
How change font color of bookmark toolbar in FF 5.0?
Hi, I've just updated to 5.0 and have made some customization, but I need to change the font color of bookmarks toolbar. I can't locate the directory of Chrome or the UserChrome.css file. Then... How can I change?
-
In El Capitan disk utility doesn't resize
Hi all I tried to resize (external) hard drive partitioned with the renewed drive to El Capitan utility. It was a disappointing experience. What happened with the councelling software? It's anything but councelling. My 2 TB drive was divided into 2 p
-
Hello! my laptop is hp 15-r012sv and I have it downgrade from windows 8.1 for windows 7 (64-bit) ultimate. And now I can not find some drivers as the driver for the usb 3.0 port. Check this box: