Netflix: The network appears to be down

Similar Questions

• Every few minutes, the message "the network seems to be down. Is the network configured correctly? »

  When you play Pandora, every few minutes, the message "the network seems to be down. Is the network configured correctly? "is displayed. I click OK and Pandora continues. Network connection diagnostic report no problem. I have the BDP-S390 and a cable network.

  Hello Thomas,.

  Also, try using a different Ethernet cable or try to connect the player to another router's Ethernet port. He may be a problem with the Ethernet cable taking Ethernet to the router/player.

  Make sure that the Internet speed is 2.5 Mbps for SD videos streaming and 10 Mbps for streaming HD videos.

  If my post answered your question, please mark it as an "accepted Solution".

• Updates the window appear when shutting down, but do not set up the next time you start

  The display shows 15 updates of Windows are loaded (installed?) when the machine is stopped.  To restart Windows, the screen indicates "wait" while the updates are being configured.  The icon indicates that the configuration is current, but the screen always said that "0% are completed.  Then, after a few minutes, the screen indicates something as "installation failed; Revenant.  After the message 'return', the machine moves to the usual Windows 7 start page and asking to connect you as usual (which allows me to work on the machine).   So, the next time I shut down Windows, the screen indicates that the installation of several updates continues and is completed in series.  Then, the next time I turn on the machine it asks to wait while updates are configured;  and finally, it "fails to complete the configuration" and "resets" as described above.  What happened several times in the last two days.  What should I do to get this resolved failure?

  Hi BonnieDoon,

  1. did you of recent changes on the computer?

  2. you receive error message during the update by installing the process?

  Method 1

  See the Microsoft article below as well as try the steps mentioned and check if it works.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

  Method 2

  Restart the computer after you follow the steps above and check if the problem persists, if the problem persists then checks the update is not being properly installed on the computer and then install it manually.

  View update history to know which update is not installing.

  (a) open Windows Update by clicking Start , all programsand then click Windows Update.

  (b) in the left pane, click view update history.

  (c) to view more information about an update, double-click it.

  Once you know the update's KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  http://www.Microsoft.com/downloads/en/default.aspx

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When I change my nic to 1000 Mb, Full Duplex in the vSwitch/network settings on the NETWORK adapter card breaks down.

  I should be able to do so if the server has Gigabit NIC right?  Or am I just confused?  It seems to stay on 100 full, but it seems that things have been a bit slow on my virtual server, so I tried everything I can think of.

  Hello and welcome to the forums.

  I should be able to do so if the server has Gigabit NIC right?

  Yes.  What is the physical switch on?

  Good luck!

• Plugged in the new maps the host network but show as 'down' in vCenter

  Hello

  I hope someone can help me.  I'm under ESXi 5.1 on 3 different servers.  They each have 4 network cards, but for some reason when our IT installed in the data center, they decided to connect just 2 network cards in each server in our dedicated physical switch.  They presented themselves as vmnic0 and vmnic1 in vCenter and can be used.

  I asked them to connect 2 additional network cards they have done today.  These are connected to the same physical switch. They appear as vmnic2 and vmnic3 in vCenter.  They are always displayed as "Down" for the speed and 'None' for the observed range of IP addresses.

  I tried to restart a host without change.  I connected to one of the hosts through Putty to try to get him to help

  # esxcli network nic place vmnicX - n

  But that does not change. No error is given, but when I list the network cards they always see down and still there in vCenter.

  Any ideas?

  Thank you

  Mike

  Hello

  your team must inspect the physical switch configuration. Maybe the ports are disabled or a VLAN configured wrong, etc..

  Tim

• (I am in China and on the front is partly in Chinese.) I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears.

  Dear Firefox support, I am in China, and the first page of my Firefox screen is partly in Chinese. I use Astrill which is a virtual private network and the code of the Australia, but still the Mandarin appears. I downloaded a new version 5, but the mandarin (and the associated statement bar) still come in Mandarin. How can I download a really English version?

  You can choose your language installation of this list: http://www.mozilla.com/firefox/all.html

• Message appear conflict of IP address at startup. Another computer already uses the network with the same IP address. How do I cure this?

  When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.

  Hello

  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista

  2. only the error message appears only when the Xbox is connected to the computer or at both times?

  3. have you made any software or changes to the material on the computer before this problem?

  Please answer these questions and provide additional information so that we can better guide you.

• When I click on close downcomputer the hourglass appears on the desktop for more than a minute before the closing down of the icon is displayed

  When I try to shut down my computer, I click on start > click on computer of closing and the hourglass appears on the Bureau for more than a minute, when the close icon appearsand I click on it, it takes about 2 minutes to turn off actually. Any suggestions

  We need more information!

  Borrowing another post by ElderL (the same "JoseIbarra' that Elizabeth23 already mentioned):
  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  What is your Internet browser and version?

  Do you have the Windows Desktop Search installed issue?

  Your system's disks IDE or SATA drives?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  What do you see (exactly) that you don't think you should see, and when you see it?

  What do not you think that you should see?

  If the system works, what do you think might have changed since the last time it did not work properly?

  ___________________________________________________________

  Once you answer these questions to the best of your ability, a lot of people here (don't forget that almost all of us are volunteers who are also using Windows XP) will probably be able to help quickly resolve your problem.
  That (ElderL also) might help, too (because its results will contain many answers to the above questions):
  Click Start, run and enter in the box:

  Msinfo32

  Click OK, and when the system info summary appears, click on edit, select all (Ctrl-A), copy (Ctrl-C) and paste (Ctrl-V) the information back here in your next reply.

  For video device and driver information, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Wrt1900acs nine installed today - peripheral unknown offline appearing in the network map

  Installed my new wrt1900acs today, began to connect devices, signed for the Smart Wifi Linksys. The network card correctly displays all connected devices, but there is a mystery device appear offline. I have used Parental controls to block access to this device until I can find more.

  How would a device appear? It should be linked at some point?  The new router has only been for 3-4 hours.  I connected only 2 laptops, a desk and a phone to iOS. Have not connected my non - iOS wifes phone still.  There are also 2 other routers and networks connected to the same Comcast modem.

  The mystery device is presented as "generic device" with only a name and a MAC address.  I was able to remove, but did not know if there was a simple explanation for it.

  Yes it should have been connected or on the network at any given time.

  Use the clear network adapter icon in the top-right corner of the user interface to allow the map to regenerate. I could take a few minutes.

• removed from the network computers still will appear on the network map

  I have removed two computer laptop computers fom my network and removed in the network map.  They are no longer on the PREMISIS (sold).  Subtracting them to the magic of the network, I removed the network locking, set up as 'Follow-up as intruders' and they removed the network card.  I then reset the locking system.  When I bruing to the top of the map of the network, they are gone.  However, after a few minutes, as they appear again.  How can I remove them permanently from my network?

  Your network card is like showing wrong info. You can follow the steps on this link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=8571edab25b54432bfb7b7672a577b8f_19407.xml&pid=80&.... This is a guide for you refresh the service of the network magic software platform and then check if after doing the steps in the network card will always show the same information.

• Unknown devices appear on the network?

  Hello. I just bought an E900 and I make TVs and phones on the network, which i haven´t connected. They don t appear in the DHCP list, and I've changed the SSID and password and restarted the router and the PC. They do or see when running - an arp. As soon as I connect my old router that these devices disappear and Don t appear again until I have plug the Linksys. PC is clean, antivirus and anti-malware.

  It also seems that the Linksys forces my G930 to reconnect, that didn t happen with my old router (Belkin F7D2301 V1).

  (Until I got a TP - Link TL - WR941ND V4 that reconnects, who was one of the reasons why I've changed for the Belkin.)

  Any ideas?

  

  Greatings

  Ammageddon

  Hello Jay_D.

  I just tried again. Factory reset the router again. Changed the SSID and password in a totally different frame then seized. I even changed the Routername. Always get devices in the network.

  Devices to disappear and reappear again after a short period. However, that TV Bravia disappeared and hasn´t again, phones are still there and now I even got a few Phillips TV showing. The TV only I have is a Toshiba, and doesn´t even have a network card.

  

• Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder.

  Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder. When you right click on the connection of customer created, click Properties, it says "connect using the Modem.

  Is it a registry problem or what? How can I fix?

  original title: PPPOE connection problem

  Hello

  1. you connect using a cable or DSL modem?

  2. did you ever get this working before that?

  3. are you connected to a domain?

  4 are you running Vista in a virtual environment?

  You doing appeared in this link to create the PPPOE connection:

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-PPPoE-connection-to-the-Internet

  Thank you

• Computer laptop XP does not appear in the network of Vista laptop

  My cell phone based on Windows-XP does not appear in my laptop Windows Vista-base and is not accessible from this Vista computer, but it appears in the network adapter connected to the network wireless by a double dashed line. At the same time, the laptop Vista appears in computers on the XP network and is accessible from there. I have already applied Windows XP - SP3 hotfix KB 922120 to XP laptop and checked the firewall on both machines (Exceptions) settings, and they seemed OK. Also, I checked the HKML restrictanonymous DWORD value data value data (0) of the XP machine.

  Can someone help me with this? Thank you so much in advance.

  Hello
  Maybe this can help.

  To get best results connect to each computer system screen and set all the computers to be on a bearing the same name of Working Group , while each computer has its ownunique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please Note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic.

  If you end up with the 3rd party software uninstalled or disabled, make sure that Windows native firewall is active .

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040

  In Win XP Pro with simple sharing Off, you can visually see the Permission/security level and set them up at your convenience.

  http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab

  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have permission and security issues with Vista/Win7, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . All the users who are allowed to share need to have an account onall computers that they are allowed to connect to.

  Everyone is an account, that means a group of all users who already have an account now as users. It is available to avoid the need to configure permission for each on its own, it does not mean all those who feel that they would like to connect.

  -----------

  If more control is needed to take a look at this page http://windows.microsoft.com/en-US/windows-vista/Share-files-and-folders-over-the-network-from-Windows-Vista-Inside-Out

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Unable to connect to the network and wireless interface does not appear in ipconfig/all on Vista32

  My niece has a laptop of HP under vista32 who cannot access the network wirelessly or wired.  She is in College and needs the laptop on the network as soon as possible for his class work.  I tried to reload the driver wireless driver (Atheros AR5007 b/g) and reset the tcp/ip stack using the command netsh addressed in the microsoft article, but nothing works.

  I brought the laptop to work where we have an unsecured wireless lan (called comments) for visitors and the laptop can go out and find all points of access wireless including comments.  When I select the comments and try to connect it times out and tells me to watch driver and tcp/ip connections.

  Another clue may be that the wireless card does not appear when I type ' ipconfig/all', or the adapter wireless and wired adapters are not displayed:

  C:\Users\Admin>ipconfig/all

  Windows IP configuration

  Name of the host...: Hannah-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Device Bluetooth (personal area network)
  Physical address.... : 00-21-86-39-EE-22
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  C:\Users\Admin >

  I'd appreciate any help I can get.

  Thank you!

  In the case where somone has this same question, I wanted to post my final resolution of the problem. I backed up its data and restored the laptop to factory default using HP restore and now everything works fine.  Better I would say loading Zone Alarm on Vista was a bad thing for my niece to do.  Would have been nice to find a magical solution to avoid restoring but never found one.  Even after the alarm zone using their instructions by removing completely, there was apparently a problem with the registry who wouldn't let networks are working properly.  One thing I noticed after that the restoration was the HP Wireless Assistant poped up and told me about available networks, etc.  Assistant wireless didn't pop-up at all whne the cell was dismantled so maybe assistant was broken?  Well, I'm out...

• Why would you once on a network appears in the task like network 4 bar and then it turns into network 6,?

  Why would you once on a network appears in the task like network 4 bar and then it turns into network 6,?

  Network 6 is rated a public network. I want only connected to the internet so is that correct or should it be local

  File and printer for microsoft networks sharing has a check in it, it should be?

  One of my grandsons that started a few days ago and I don't know if it is passed something for xbox?
  TKS

  the only shared printer-shows

  Hello

  The number of network cards you have in your computer?

  For example, it might be a laptop computer with wireless card and wireless card, and each of them receives a different number (the number is just a number it does not mean that there are 4 cards more).

  Whether it's a regular network or a public network, must be able to connect to the Internet.

  Public network: connection that may use Public network such as in a coffee with free Internet house safely.

  Jack, MVP-Networking. EZLAN.NET