Network Bridge does not work after copying on another system

Similar Questions

• Update my wireless network device does not work after installation of Software Distribution Service 3.0

  After the installation of Software Distribution Service 3.0 update my wireless network camera does not work how do I uninstall Software Distribution Service 3.0

  How did you receive the update?

  Was it via Windows Update or Microsoft Update?

  Before the changes are made to your computer, the system restore points are made. This is so that you can go back in case an update causes problems.

  Follow these steps:

  1. click on the Start button

  2. click on accessories

  3. click on system tools

  4. click on system restore

  5. click on next

  6. in the calendar that appears, select the one which refers to Software Distribution Service 3.0 and click Next

  After the collection of certain data, the computer will restart, and the update will be gone.

  Hope this helps

  Post back if necessary

  ___________________________________________________________

  If this post can help solve your problem, please click the 'bookmark' or 'Yes' to this message button. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Urgent - the sound recorder does NOT work after getting the window system 7 (64-bit)

  I have a problem with the sound recorder. After that I got the system with Windows 7 (64-bit), the sound recorder does not work. It's very urgent because I need to procticing my English pronunciation and the test day is coming.

  Please would you give me help? I really appreciate!

  Thank you very much.

  Eleanor

  A prompt by right clicking and select "Run as Administrator"
  and then at the command prompt, type: chkdsk /f r, then press the Enter key.

  If you are asked to plan the volumn to check the next time that the system restarts,
  Enter: y

  If you know the manufacturing of your hard drive you can also download their diagnostic software.

  Another use: SpeedFan has an online health analysis function
  (SMART tab) for hard drives. It will show how your disks
  compared with other discs of the same brand and model.
  http://www.almico.com/SpeedFan.php

  ========================================================================

  Run the SFC/scannow command. This will check and repair if necessary all of the critical Windows system files.

  Click on start / all programs/accessories then
  Right-click on the command prompt option and select "Run as Administrator".
  (or "Safe Mode" open a command prompt)
  At the command prompt, enter: SFC/scannow

  Windows 7 - order SCANNOW SFC - System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista:
  http://support.Microsoft.com/kb/928228

  J W Stuart: http://www.pagestart.com

• The network bridge does not connect after resume the S3, Windows 7 x 64 & x 86.

  I installed a network bridge between my wireless network card and a local LAN port on my motherboard, I have my xbox connected to the LAN port and the wireless card has the connection to the internet.  Everything works as expected and I have full access to the internet on PC and xbox.  Issues occurs when I upgraded my PC to sleep and then wake the system, wireless connection works as expected and can see my router but the network bridge not be re - not connecting, I have to disable the bridge then turn it back on until it will work...
  The same Vista configuration worked without problem.

  I'm having the same problem as you, I'm trying to use my laptop to connect my Xbox 360 to my wireless network. It works very well, I have to disable and then re-enable the Miniport MAC bridge or a connection to the Local network after every sleep sleep before that it will work again.

  I noticed that I can not ping even the Xbox until one of these actions is carried out, I don't think that it is actually a problem with the network bridge, but with the ethernet connection (Marvell Yukon 88E8038 PCI-E Fast Ethernet Controller for me). I agree I think that it is an OS problem because I also do not experience the problem with ICS but then cannot be a State of NAT open for the 360.

  An obvious solution is a script that you can run to disable and re-enable the connection to the Local network, someone there at least an easy way to do this?

  EDIT: actually I think I just solved the problem by doing exactly the opposite of what I saw as the solution proposed several other places.

  1. open Device Manager

  2. Select the network adapters, find your ethernet card, do a right click on it and go to properties

  3. click on the power management tab.

  4. make sure that the "allow the computer to turn off this device to save power" box IS COCHEE

  5. apply the settings, and then click OK.

  FACT

  I hope this helps you.

• Network adapter does not work after upgrade to Windows Vista Black edition

  Help, please

  I use to have windows vista and now I upgrade to windows vista Black edition.__i guess my network adaptar said corrupted__it network adaptar must be reinstalled .__i don't know where should I reinstall the driver__

  Microsoft does NOT Support Vista Black Editions.

  You will need to request support for Vista Black Edition where you have obtained/downloaded from.

  See you soon.

  Mick Murphy - Microsoft partner

• NETWORK adapter does not work after upgrade

  Hello

  I have two identical servers, HP ML350 G6, with an additional NIC from Intel (82574L).

  The first server running 4.0 and I upgraded to 5.0 without any problem.

  The other server was running 4.1 so I thought that there is no problem here either, BUT when I got to the installation/update I did not upgrade option, I had a migration of Force instead. He complained of two pilots 'oem-vmware-esx-drivers-net-vxge' and 'oem-vmware-esx-drivers-scsi-3w-9xxx '.

  I thought that the first server was no problem and it works well on 5.0 so I did a force to migrate.

  When the Force 'migrate' was done and I started the server I noticed that a NETWORK card no longer works correctly, Intel 82574 L...

  It says it is disconnected, and there is a red X next to it. I checked the first server again to see if it was really the same exact material and that's the only difference is that the Intel NETWORK card is working on the first but not the second server and they are now both on 5.0...

  How is it, I have had no problem for the rehabilitation of the 4.0, but when I upgraded to 4.1 I had these problems? And how do I fix?

  I need this server running as soon as possible.

  This good news

  Please mark the discussion as correct

• S3-391 Acer wireless network adapter does not work after driver update

  Hi, I have an Acer Aspire S3-391 running Windows 7 64 bit and I have recently updated my card (Atheros AR5BMD222) wireless network to the latest version of such 10.0.0.274 as recommended by the Acer site.  After updating the driver, I can no longer connect to my wifi at home.  When I try to connect, I get the message that no wireless connection is available (even if all my other devices can see the wifi network) and when I diagnose the problem, it is said that there might be a problem with the wireless network card and that windows could not automatically bind the ip stack Protocol.  I tried to uninstall the new driver and reinstall one old and running a system restore before installing the new driver, both with no luck.  When I try to manually configure a wireless connection, I get message "an unexpected error has occurred."  I have an automatic DNS and IP address, and when I look at my ipconfig, IP, DNS, DHCP, etc all have addresses.  Any help would be greatly appreciated, thank you.

  And while playing, I managed to fall on a solution.  When I looked at the properties of my wireless network card, I have disabled NetBIOS over TCP/IP and now everything works fine.

• Satellite L750D - network controller does not work after upgrade 64-bit

  L750D psk36a - 038008

  Thought I'd start with my full model number then the problem

  * before the upgrade everything worked well.

  Well I just upgraded my windows 7 32-bit to 64-bit to take advantage of the 8 GB of ram.
  Everything went well, I downloaded and installed all the drivers support > downloads section for my laptop in the 64-bit section.

  It seems I have a problem with the Bluetooth and network controller.
  The controller of the network in Device Manager says no driver not found or installed, I tried to uninstall and reinstall the device as well as redownloading drivers and reinstall, but no luck so far.

  Driver departures Bluetooth installation becomes subject to halfway and crashes, saying Bluetooth is not on, I tried fn + f8 to power on but no luck, I did the same as for the network card, uninstall, do reinstall, fresh driver, no change. In Device Manager it shows RFBUS with no driver found or installed.

  Any help would be appreciated.
  Sorry for the massive post...

  On a side note, I had a fresh win7 32-bit installed yesterday evening to see if I could get it working again but same problem.

  Hello

  According to the specifications of the laptop this piece of hardware was shipped with the 32-bit versions and 64-bit Win7 then why you do not install the original recovery 64-bit image?
  I presume you didn't create recovery media, right?

  When you open the Manager, devices and network adapters is LAN or WLAN installed correctly?
  What's missing?

  On BT, you're right. Impossible to install software to peripheral BT BT is not enabled correctly.
  What is with FN + F8? When you use it you see BT option there?

  Please note: If your notebook is WLAN switch, it must be turned on (the WLAN led should be lit) and only then you can use the FN + F8 key combination to activate the BT module.

• NVIDIA nForce network controller does not work after a clean install of Windows 7 "Code 10"

  HP 6736nr

  AMD processor, nVIDIA nFORCE Network Cotnroller (I wish there were more about HW than that)

  Windows7 32 bit host

  Wireless works fine.

  For network LAN controller, Device Manager displays "Device cannot start Code 10".  not useful as nVIDIA site

  I need to find new drivers.  Following hardware ID:

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C & REV_A2

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C

  PCI\VEN_10DE & DEV_054C & CC_020000

  PCI\VEN_10DE & DEV_054C & CC_0200

  I tried to disable / enable, and uninstall and nothing works.

  Thanks in advance.

  Hello:

  Normally, the chipset nForce Vista driver install the network card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2100&Product=3646946&sw_lang=

• VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

  Hello

  I upgraded the PC host, but also virtual machines to Windows Pro 10.

  TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

  Is this a known issue?

  Thank you!

  Kind regards

  Joe

  SOLVED!

  
  

  I uninstalled VMware Player, including the abolition of the configuration files.

  
  

  re-installed VMware Player and it worked!

• the perimeter network on vmnet0 Bridge does not work

  Hey there ' All,.

  I've been running VMware for more than 8 years on workstation or server, but I have a last question a few days and I don't seem to be able to solve it.

  Here is some basic information:

  1. Windows 2003 x 64 sp2

  2. I have 4 nic (broadcom and intel)

  3. This server is running for 3 years. Dell 2950 2cpu Quad, 16 GB

  4. started with VMware Server 1.0.0 and am on VMware Server 1.0.10

  5. 5 VM work without problem.

  6. the server was at 6 or 7 months. has decided to update Windows.

  7. I shutdowned all these 5 VMs.

  8. (35 updates) windows update

  9. rebooted with no problems

  10. the host works very well. access to the Internet. everything is good.

  11. Start the vmware console and start one of the virtual machines (windows server 2003)

  12. system starts with the error: "the network device VMnet0 Bridge does not work. the virtual machine will not be able to communicate with the host or other machines on your network. virtual device ethernet0 will start disconnected.

  13. This massage is for all virtual machines.

  14. last thing on virtual machines: all NIC 2 (bridge and customized to VMnet1) running. That's how since 2007.

  what I've done since:

  1. Reinstall VMware 1.0.10

  2. restarted the server host

  3. update of two network cards (2 x broadcom and 2 x intel)

  4. I read on this forum that could be challenged NIC Cluster NIC but I've not grouped NIC

  5. played around with the settings of the host virtual network. removed changed etc... no luck

  6. I hear everywhere that under "automatic gateways" I need to uncheck. This could be the right track but that checkmark is grayed out.

  any pointer would be very appreciated.

  see you soon

  Have you checked that the 'bridge' is enabled on the physical to use network connection?

  Disabled all firewall?

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Ethernet USB adapter does not work after update to sierra mac

  Ethernet USB adapter does not work after update to mac sierra.

  Please solve this problem as soon as POSSIBLE

  Hello guatamshah,

  If your USB to ethernet adapter does not work now that you have upgraded to Mac OS Sierra, there are a number of things we can try to get it working again.

  The first thing we want to do is to reset the SMC and the NVRAM on your Mac.
  Reset the management system (SCM) controller on your Mac.

  https://support.Apple.com/en-us/HT201295

  How to reset the NVRAM on your Mac.
  https://support.Apple.com/en-us/HT204063

  If the adapter is not still work after only two resets check to see if your Mac recognizes the device properly in the information system. In the Apple Menu, choose about this Mac, and then click the button 'system report... '. ». Once you have the window open system information, see the USB category on the left.
  OS X: about system information and System Profiler

  https://support.Apple.com/en-us/HT203001

  If she does not appear in the information system, see the articles below.
  macOS Sierra: If a USB device does not work

  https://support.Apple.com/kb/PH25343

  macOS Sierra: check your device's USB connection

  https://support.Apple.com/kb/PH25567

  However, if you do not see the device in system information, you may need to verify that network service appears correctly. In the Apple menu, choose system then Network preferences. You should see an entry similar to "Ethernet" on the left. If no, see the steps in the article below to add. Once add, test to see if your connection works with a disabled Wi - Fi connection.

  macOS Sierra: Add a network service
  https://support.Apple.com/kb/PH25279

  If it does not appear in the network, please let us know what you see on the right when you select the service, and the name of the service as it appears and we can go from there!

  Kind regards.

• Using the function of scan macOS Sierra HP Officejet 7300 series network printer does not work; He had no problem with El Capitan...

  Printer HP Officejet 7300 network series that allows to work flawlessly with El Capitan does not work after the upgrade to Sierra.

  With macOS Sierra, when used as a network print service printer works fine however scan does not work. Programs like the Image Capture, HP Easy Scan etc does not see the printer. However, if the printer is directly connected to the Macbook Pro using the usb cable, a new printer is added to the list of printers (it shows print and scan functions while the printer network in the list shows only printing function) and the scanner works well with Image Capture, etc. If the usb cable is removed disconnects this printer in the list and there is no way to turn it on. I have the latest update for the printer installed from the App store. It looks like a driver issue, but I wonder if there is a work around for this problem...

  Open Preview.app. Under file in the menu bar, you see import of 'name of your scanner?

• Wireless network adapter does not work on my Satellite A200

  Hello

  My wireless network adapter does not work under Vista. If I press FN + F8 nothing happens. Wireless communication is always offline.

  What can I do?

  Details:
  Typ: Atheros AR5008X Version: 7.2.0.164
  Laptop Satellite 200
  PSAE6E

  Please help me!
  Thanks in advance!

  Phil

  BIOS bug? I don t think so

  First of all, you must make sure that this isn't a hardware problem. In this case, insert the Toshiba Recovery CD and reinstall the operating system of this device. This will outline the laptop to factory settings. Notes; This would format the whole HARD drive.

  After the new installation, you must activate the WLan switch on the side of books, and you can then use the switch button FN + F8 to select the WiFi network.

  I assume that you have already configured your Wlan router. So the same settings such as the SSID, encryption of WLan, etc. must be defined on the laptop too.