Network of full service HP OJ 6500 HP laptop?

Similar Questions

• Full service then no appeal abandoned service cannot connect to the Tower

  Posted to help others:

  I bought an iPhone 6 s it took 3 hours for Verizon connect my phone to my new Verizon account. The phone would display full service bars then, slide an or no service in bars. the phone was finally connected but may 2016 so far I sill experience the same problem of poor or no service call and dropped. Often the phone will not even scream or try to connect to the network.  Apple has replaced the phone 3 x but with no. change my service problems. Verizon and Apple senior level tech support spent to treat 30 + hours on the phone with me trying to solve this problem. We replaced the SIM cards without change. When I put the SIM card in my iPhone 6 it works fine. Full don't signal any calls interrupted and service when roaming. Back in the 6s and no service in the same place. Put the SIM card in the other Iphones not without problem.  If roaming is enabled, phone often it will not conbect to the tower at all. WiFi call is disabled and LTE voice data are on. I've disabled CDMA and data with little or no change with the problem. When iphone 6s loses the service and I toggle airport power phone it will display momentarily full service bars, then the bars one or not, while remaining connected to LTE. In some areas, I can receive calls but can not shout. Sometimes I can txt use data without showing on my plan as using FaceTime and can use the internet. The order indicated above of multiservices to no service happens within 10 seconds repeat throughout the day all areas companies Verizon towers and riaming towers. Verizon finally got the iPhone 6 s to work with full signal across remote I've ever had service, but continue to hamper the not being able to call in roaming. Shortly after that, the phone back to old habits after that they tried to solve the roaming problem.

  After 5 months of no stop calls to Verizon senior level tech supports on September 22, a high tech support tech senior level line finally came to the conclusion after 3 hours of troubleshooting determined it is a software problem Apple 100%. It determined that the phone for a month not was not connected totally to Verizon even if I used it. There to reset the SIM card and the network settings on the phone several times during this period to have the phone drop any connection after initial power that showed a full service then dropped the LTE then, he loses all the bars of service then shows no bar service then no service what so ever in 10 seconds. This was the problem with this phone on the first day.

  He explained that he has heard of what is happening and that Apple is currently working on a solution, but will not be out until possibly October 2016. He also said that this problen is happening now with new models Iphone 7.

  HE then stated that a specific sequence is usually not used must be used to reset the network settings by releasing the bug fix.

  How to restore your device

  1. First of all, back up your device using iTunes or iCloud so you don't lose any personal information.

  Note: If this is the first time that you have saved on iCloud, it may take time for several reasons (speed of Wi - Fi, amount of info on your device).

  2. Connect to iTunes to restore your device. 3. Choose "Set Up as new". 4. Make sure you that you connect to iCloud with your Apple ID so that only your contacts are re-added. Do not re - add photos, music or applications as they can be the source of your problem. 5. Set up your email. 6. Test for the next few days to determine if your problem has been resolved. 7. Restore your backup from iTunes or iCloud.

  Note: If you have a food problem, try to use the recovery mode.

  I hope this helps someone it is to have the same problems. I'm waiting to see if the bug fix works otherwise I'm going to an android phone. It has been too long a process without having a phone that works.

  I have the same problem - it has taken far too much time out of my weekend to try to resolve this problem. In addition, the Apple support person I spoke on the phone was very condescending.

  I've read elsewhere that change the LTE cell Options > Data Only will not solve the problem. So far, this seems to have worked for me.

• My iphone5 let me download ios 9.3 do not check say I have no internet connection when I have a full service

  My iphone5 let me download ios 9.3 it does not check say I have no internet connection when I have a full service

  version9.2.1

  Many users have encountered problems to update their devices, their activation or signing into their account after updating iOS 9.3. Apple is aware of the problem and working on a fix.

  Take a look at these articles for additional information on the issue or adapt:

  If you are unable to activate your iPhone, iPad or iPod touch after installing iOS 9.3 - Apple Support

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3If you cannot activate your iPad 2 (GSM model) updated to iOS 9.3

  Apple stop updates iOS 9.3 for older iDevices due to activation server locking problems more

• Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security

  In the diary of my application event log errors, I have many of these MSSHA ID 1027 events, get Windows Security Health Agent advised a change Windows network access protection service in the State of health of computer security.    I understand what its about, but have no idea how or what to do about it.  Help!

  http://TechNet.Microsoft.com/en-us/library/cc735442 (v = WS.10) .aspx? ppud = 4

  According to this site, no user action is required.

  I don't know why you receive this error message, but apparently is not a problem.

  http://msdn.Microsoft.com/en-us/library/dd565668 (v = VS. 85) .aspx

  the above site is a very detailed description of the error.

• Network location awareness service terminated with service specific error %-1073741288.

  I get access is denied errors on Server 2008 r2 error 5 when trying to start services when you try to start the network location awareness service is back with 1073741288

  We receive this error on an application server that connect customers

  Clients know response times very slow, this could be the course?

  Please note that when different users log on to the client computer even know some enforcement LAGS

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  I suggest you to send your request in the TechNet forums to get the problem resolved.

  Please visit the link below to send your query in the TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer

  Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

• How to fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)

  How can I fix Peer name resolution Protocol (PNRPsrvc) Service or Peer Networking Identity Manager Service (p2plmsrvc)?

  Hello

  1. do you get any error message related to name resolution Protocol Service by peers or Peer Networking Identity Manager Service?

  2. the performance of the computer is made?

  3. were there any changes (hardware or software) to the computer before the show?

  Make the SFC (System File Checker) scan and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Hope this information helps.

• Reader network Windows media services setting keep happen to automatic (delayed) sharing

  Hi Im having problems with Windows Media Player 11.

  I noticed the drive share network windows media services setting the parameters of the service, has been set to automatic (delayed). I changed it to automatic only so I can stream video files to my Xbox 360. Go to the oprtions streaming in wmp and turn on allow streaming media. It works fine but only for a few minutes, then the service settings changes itself to automatic (delayed). This keeps happens whenever I change, the Dungeon settings changing to automatic (delayed).

  I hope you can help,

  Kind regards

  Gary.

  Hello

  I suggest you to check the link for the error 1053 and check if it helps:

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

  I suggest you also for the link and run the Microsoft Fix it:

  Solve the problems of Windows Media Player video and other media or library

  http://support.Microsoft.com/mats/windows_media_player_diagnostic

• Homegroup that my pc can't find the other pc, it seems that the Peer Networking Identity Manager service is not running. How can I make it work

  I lost contact with other computers in collective housing. It would seem that the Peer Networking Identity Manager service (p2pimsvc) does not work. How can I make it work?

  Hi Ken Jones571,

  ·         Did you do changes on the computer before the show?

  I suggest you to set the service to automatic and check if this is useful.

  a. click the Start button and type Services in the Start Search box and press enter.

  b. find the Peer Name Resolution Protocol (PNRPsvc) services or services Peer Networking Identity Manager (p2pimsvc), set it to Automatic to clicking on the service and selecting Properties and change the Startup type to Automatic.

  Method 1: I suggest you try a clean boot and check if the problem persists in the boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Method 2: It could be that the NVRP svc and p2pimsvc is corrupted, remove entry can help you solve your query. Check the following location and delete the file idstore.sst

   

  C:\Windows\ServiceProfiles\LocalService\AppData\Roaming\PeerNetworking\idstore. OSH

  Let us know if that helps.

• .i did not make a full backup, because I bought my laptop. I use win7 Home premium 64-bit

  I checked forums, tried Mr. difficulty, used usb and dvd rom and it still says not enough space and also I can only use tools hp (drive f) or g (dvd player) drive as an option for backup space. Ive tried to change the options for many times... I did a full backup since I bought my laptop. I use win7 Home premium 64-bit.  backup of files recall comes on the other constantly.anybody I have this problem?

  I suggest avoid you the Windows backup program and you get a good commercial backup program. This forum meets for a windows problem reports. I know that I was very impressed when I tried it. Three I'm familiar with and like Norton Ghost (which I use for 8 years no 1 problem), Easeus Todo Backup free, you can download it from

  http://www.TODO-backup.com/products/home/free-backup-software.htm and Memeo , which has 30 day free trial and you can buy it for $29.99 - you can download it from http://memeo.com . You can get Ghost for almost nothing (like me), if you look at the sales.

  The March 2012 issue of PC World is very high on the program FREE of Easeus and I tested it recently in a variety of configurations; and must say that I am very impressed. As Ghost will support up to a network drive and it will create a bootable CD for when your PC does not start. See commentary to PC World to

  http://www.pcworld.com/downloads/file/fid, order 80031, 4/description.html .

  -

  CNET has a lot of reviews of backup program to

  http://download.cnet.com/windows/backup-software/?tag=contentBody;sideBar .

  Some of them are free (the last time I checked there over 300), some have free trials (more), and some are buying only (more than 200).

  -

  External hard drives are the best for backup. You can get a 500 GB one for $70 and a 1.5 to one for about $90. You can also buy a flash drive of 32 GB for less than $20. It is the best insurance you can buy ever!

  -

  I hope this helps. Good luck

• Full service pack 2 for Windows Vista update problem

  I'm bad havivg update to service pack two for Windows Vista Edition full. After I download and install the package it says then return back to the previous windows instalation. This whole process takes seven or eight hours. Then, I get so sort of little box on a black screen with some kind of error message and code. The last time I did this update I have re-installed a clean windows all over vista. So I lose some files. Then, Windows stores some of the files on the instalation of windows prior to an old file of windows. So what should I do to solve this problem? Is there a quick fix to this problem? Anybodys help is appreciated.

  Bye, narrating

  Hello Michael,

  Thanks for your help, but I downloaded the utility Windows install cleanup a few days ago and installed it. Today, after I first started my computer, I got a notification down in the lower right of my screen saying new updates are available. I clicked ok on update for service pack 2 and installed successfully.

  Bye, narrating

• Network printer spooling Service problems

  I have a wireless home network.  One of our laptops cannot add wireless printer.  I get the error "the local print spooler service is not running"... and "Spooler Subsystem App. Stopped working. "I check the named service and he said: it is running.  Other computers have no problem to access the network printer.  Any thoughts?

  Hi rghill,

  Here's how to fix this:

  1. go in programs and features in Control Panel > on features Windows turn on or off

  2. click on + sign of printing services

  3. Select LPD and LPR. You must remove the Internet printing Client. > restart your PC to ensure there is no error in the spooler service.

  de http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

• start time of 10 min with the network store interface service

  When you connect, the computer crashes to the screen of welcome for about 10 minutes.  I disabled all services of 3rd parties and the problem persists.  I reduced the problem to the "shop network interface service.  When I the hell this service, I don't have no problem with long, but internet connection times no longer works.  Any ideas?

  Hello

  Alternatively, you can try to start the computer in Mode without failure, then whether the diagnostic mode safe tools providing information about the current state of problem.

  To start in safe mode keep tapping on the F8 on the keyboard key during restart until Windows starts to load. An option will appear allowing you to choose boot safe mode with networking, select it and press .

  At the end of the boot.

  http://Windows.Microsoft.com/en-us/Windows7/diagnostic-tools-to-use-in-safe-mode

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Network Store Interface service

  The mouse pointer often turns into an hourglass and the system is slow. I narrowed the problem to the 'Store Network Interface Service'.

  How can I solve this problem?

  It turns after several reboots after a change in the startup section of msconfig I was able to isolate the problem to HP digital monitor. I turned off and everything seems to work now.

• ASA 8.4 cleaning using Network Configuration and Service objects

  Hello

  As most of you know, firewall configurations can growth in order to be large and complex, making them difficult to understand and difficult to change.

  I have a cleaning using network firewall configuration and Service objects and groups of objects running from 8.4 who I want to. This ASA (8.4) has over 30 Web Server VM deployed behind each with the same basic configuration: one to the outside inside the IP address and port mapping (x.x.x.x:ftp to y.y.y.y:ftp, etc.) by using the following well known ports: FTP, 80, 443, 3389.

  Examples of my existing configuration:

  network of the Y.Y.Y.Y_FTP object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp ftp ftp service

  network of the Y.Y.Y.Y_WWW object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp http http service

  network of the Y.Y.Y.Y_HTTPS object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp 443 443 service

  network of the Y.Y.Y.Y_RDP object

  Home y.y.y.66

  NAT (inside, outside) static service tcp 3389 3389 X.X.X.66

  outside_in list extended access permit tcp any host y.y.y.66 eq ftp

  outside_in list extended access permit tcp any host y.y.y.66 eq www

  outside_in list extended access permit tcp any host y.y.y.66 eq 3389

  outside_in list extended access permit tcp any host y.y.y.66 eq 443

  The entries above for each port have to do whenever a new virtual machine is deployed behind the firewall.

  Here's my ACE project and entered the object-group service to clean up configuration.

  object-group service WWW_FTP

  Description access FTP HTTP

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  the purpose of the service tcp destination eq www

  object-group service WWW_FTP_RDP

  Description access FTP RPD WWW

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  the purpose of the service tcp destination eq www

  the destination eq 3389 tcp service object

  object-group service WWW_FTP_RDP_SSH

  Description access WWW RDP SSH FTP

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  the purpose of the service tcp destination eq www

  the destination eq 443 tcp service object

  the destination eq 3389 tcp service object

  object-group service RDP_SSH

  Access SSH RDP description

  the destination eq 443 tcp service object

  the destination eq 3389 tcp service object

  object-group service RDP_SSH_FTP

  Access SSH FTP RDP description

  the destination eq 443 tcp service object

  the destination eq 3389 tcp service object

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  object-group service RDP_FTP

  Access FTP RDP description

  the destination eq 3389 tcp service object

  the tcp destination eq ftp service object

  the purpose of the tcp destination eq ftp service - data

  outside_in list extended access allowed object-group WWW_FTP_RPD any host Y.Y.Y.Y

  outside_in list extended access allowed object-group WWW_FTP_RDP_SSH any host Y.Y.Y.Y

  outside_in list extended access allowed object-group WWW_FTP any host Y.Y.Y.Y

  outside_in list extended access allowed object-group RDP_FTP any host Y.Y.Y.Y

  outside_in list extended access allowed object-group RDP_SSH_FTP any host Y.Y.Y.Y

  outside_in list extended access allowed object-group RDP_SSH any host Y.Y.Y.Y

  The challenge lies in the consolidation of the network object entries that follow into something more condensed as the entries in the object-group service.

  network of the Y.Y.Y.Y_FTP object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp ftp ftp service

  network of the Y.Y.Y.Y_WWW object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp http http service

  network of the Y.Y.Y.Y_HTTPS object

  Home y.y.y.66

  NAT (inside, outside) Static X.X.X.66 tcp 443 443 service

  network of the Y.Y.Y.Y_RDP object

  Home y.y.y.66

  NAT (inside, outside) static service tcp 3389 3389 X.X.X.66

  Any help is greatly appreciated!

  Hello

  I'm afraid that the only part of the configuration you can really change and make more condenced is configurations ACL using configurations different ' object-group ' .

  Of course, you can also create a "object-group" for all servers that need the same ports open to further reduce the lines of actual configurations in the configuration of the CLI.

  However,.

  Regarding NAT configurations there is unfortunately no way to reduce the amount of required configurations if you use Static PAT (Port Forward) for servers. There is no way yet to ports in group for "nat" configurations.

  My question is, you have public IP addresses less at your disposal compared with the amount of different servers in your network behind the ASA?

  If you have a public IP address dedicated to each server in the network, then I suggest to use static NAT instead of static PAT. It's about the only way that the NAT configuration could be minimized.

  -Jouni

• ACS 5.1 - Ganymede + issue witch 'network access' access services

  Hello world

  can someone explain why Ganymede + cannot be used with the network access services?

  

  I know that Ganymede is mainly intended command authorization, but as I remember with ACS 4.2 it is possible. For example for the purpose of PPP.

  THX and regards

  Przemek

  GANYMEDE + applications cannot be managed by access with the Service Type «Peripheral Administration» services

  If the type is NetworkAccess, it will fail. Please check the Service Type defined for the Access Service 'VPM-access '.