ACS 5.1 - Ganymede + issue witch 'network access' access services
Hello world
can someone explain why Ganymede + cannot be used with the network access services?
I know that Ganymede is mainly intended command authorization, but as I remember with ACS 4.2 it is possible. For example for the purpose of PPP.
THX and regards
Przemek
GANYMEDE + applications cannot be managed by access with the Service Type «Peripheral Administration» services
If the type is NetworkAccess, it will fail. Please check the Service Type defined for the Access Service 'VPM-access '.
Tags: Cisco Security
Similar Questions
-
Type of Service you choose ACS 5.3 - 11033 isn't network access
I have a few older devices on the network that only support the RADIUS authentication (not GANYMEDE) and would like to have them use SecureACS 5.3
I understand that by default, ACS only supports GANYMEDE to the administration of the unit. So I get this error when you try to RADIUS:
11033 selected Service type is not network access
Description:
RADIUS requests can be handled by Access Services which are of the type of network access
Text of the resolution:
Verify that the policy of Service selection rules are correct
However, even after the rules of selection of the setting function and see hits, I still see the same message in newspapers, as if she has no effect. Any ideas?
If you use the protocol like RADIUS you can not use a device administration service. You can only use the access to the network. That will allow you to authenticate on the devices.
Kind regards
Amjad
Rating of useful answers is more useful to say "thank you".
-
ACS 5.2 Access Services
Can someone explain the differences between
Default device Admin
and
Default network access
5.2 ACS uses a model policy for the processing of applications. When applications are received, they are initially processed by the rules defined in the selection of Service rules. They are assessed in a first basis of correspondence to decide what AccessService to use. Each AccessService contains within it a politics of identity, mapping Group (optional for more advanced use cases) and authorization. Identity politics is similarlyy a first political mactch which is used to determine the identity, such as internal users store or Active Directory, to use to authenticate the user. [Note indetity policy can be set for "single selection" in which cases, identity database is used for all applications]. The authorization policy is used to determine the results of authorzation must be returned to the user. In the case of RADIUS request that returns a set of authorization profiles which is a set of attributes RADIUS and their values. In the case of GANYMEDE + requests that this may return a profile (a set of attributes) of the shell and/or the command sets that determine approval of the order.
During installation and default Service selection rules are configured so that all RADIUS requests are handled by the default network access service and all GANYMEDE + applications managed by admin by default in either device, the politics of identity and authorization are defined at authentifcate on the internal database and access with no additional attributes retrurned. So when installing, everything it takes to get the applications processed is defined a corresponding user and the network device and processing must complete.
These default definitions allow you to start quicked and then change the settings to change the policies to meet the needs of the Organization
-
Hello
We are authenticate our users of portable Windows7 wireless using Microsoft CA issued certificates from computer to Server v4.2 ACS Cisco successfully using EAP - TLS
However AnyConnect 3.0.5080 is installed and Network Access Manager (NAM) runs on laptops that Nam appears to be selecting details in the bad certificate for EAP - TLS authentication to the ACS server, it selects username details in a personal certificate on the computer of users that is used by LYNC 2010 and does not use the installed machine certificate.
Newspapers of ACS that indicate this is attached.
NAM will always use the details obtained from a personal certificate of feedback a computer certificate (if they both have the same domain name that they contain).
Nothing specific that I should be looking.
Thanks in advance for any help.
No problem Jim
If you could please update this thread as you progress, this will help a lot of customers in the future!
Thank you
Tarik Admani
* Please note the useful messages *. -
ACS network access Restriction does not. He denies it, but allow.
I have a problem with the restrictions of access to the network on the Group of ACS configuration.
I configured the NAR in a group field and set it to deny access besed on client AAA, a wireless LAN controller.
But users of this group is still able to connect wireless controller.
Newspapers in GBA shows that the fields are right. the right user in the right of the group in good AAA client, but does not deny.
Put in place DNIS also supports the restriction. This is how it should be configured,
-Procedure for the configuration of NAR:
(1) go to User Configuration---> select the user name that you want to restrict.
2) go into Restrictions on access network (OAN) option.
(3) by user defined network access Restrictions.
(4) check "define CLI/DNIS-based access restrictions.
(5) select "reject the call or Access Point.
(6) in the dropdown AAA client list - select the name of the device on which the user does not connect.
(7) for Port - Development *.
(8) in CLI - use *.
(9) for DNIS - development *.
(10) click on submit
Kind regards
~ JG
Note the useful messages
-
4.2 ACS profiles with Ganymede?
Hello
I use 4.2 ACS (device) with network access profiles. It's a very big problem that profiles only support the radius Protocol, I need to use the Protocol Ganymede with profiles. I need Ganymede for permission command. Is it possible to have such a regulation on ACS 4.2:
-If the logging of NetworkDeviceGroup1 using RADIUS uses local authentication
-If the logging of NetworkDeviceGroup2 using Ganymede use RSA securID (external Radius Authentication).
Best regards
Hello
GBA 4.X NAP works only with the RADIUS.
-If you want you can go to ACS 5.X, which is more flexible.
run the IT role-based authentication / authorization and you can combine roles you need to be more flexible.
Please visit the sites:
1) http://www.youtube.com/watch?v=Xin98O-Q4JY
2) http://www.youtube.com/watch?v=vOxcrEU_-Gw&feature=related
Kind regards
Talal
==
Remember responses of the rate that you find useful
Please note the answers that you find useful and mark as answer - when is it :-) - so that others can easily find
-
ACS 4.0 Ganymede + key
Hello
I try to use an ACS for switch GANYMEDE + authentic. I'm getting an incompatibility of keys, but I know more actually to the definition of a key for GANYMEDE on the GBA unit. How can I reset / know where it is?
Thank you.
1. side ACS:
-Connect to ACS via web browser
-On the main menu of ACS, check the configuration of switch (called Client AAA) State under "Network Configuration - AAA Client".
-Check the details of the switch and the secret key said. You can re-enter the same key or set the new key (without spaces or characters).
-Compare or use this key in the switch, which is configured in the setting "radius-server."
-Save the config
2 switch
-Connection to the switch CLI (console/telnet/ssh)
-Scroll down to the "radius-server key" configuration line.
-Delete the existing key (normally / encrypted hash). Enter the same key - no more space or characters.
-Make sue you're pointing to the ACS server/IP address
-Do not save the config yet. Test the Ganymede + / authentication AAA to verify that the ACS server and the used switch button fix / identical.
I hope this helps. Pls note all useful message (s)
AK
-
GANYMEDE + peripheral unknown network or Client AAA package
Hi all
I can do connect using the set of credentials to the ACS server, log it showed:
"Reason for failure: 13017 receipt GANYMEDE + peripheral unknown network or Client AAA package."
I know there are a few changes on GANYMEDE + room for new catalyst IOS, so I consult the guide and it is the end of my config:
AAA server Ganymede group + TAC_PLUS
the AUTH server name
RADIUS server AUTH
ipv4 10.10.21.251 address
key xxxxxx
AAA TAC_PLUS authentication connection group Ganymede + local line
TAC_PLUS AAA authorization exec group Ganymede + none
AAA authorization commands 15 default authenticated if
accounting AAA periodic update 1
exec accounting AAA TAC_PLUS start-stop group Ganymede +.
network accounting AAA TAC_PLUS start-stop group Ganymede +.
connect accounting AAA TAC_PLUS start-stop group Ganymede +.
My platform is
-C6500 running on IOS 12.2 (33) SXJ1
-ACS 5.2.0.26
Need advice on this subject, thanks
Noel
Hello
What is IP IOS appropriate set to network devices and the AAA Clients for the candidate countries? If Yes, what IP address is indicated on the failure of the ACS that includes the error "GANYMEDE + unknown cover peripheral network or Client AAA? ACS reports as unknown IP address when it is already set appropriately?
Kind regards.
-
Windows 8 network access protection is turned off
I used a driver for an old Lexmark printer from them through driver whiz and it stop my normal startup and doesn't allow me to install a new HP printer. Help!
HI Margaret,.
The cause of the issue can be if the Netlogon service is disabled. I suggest you to follow the steps and check if that helps resolve the issue.
Method 1: start the Network Access Protectionservice. Follow the steps to start the service.
a. press the Windows key + R key.
b. type services.msc and press ENTER.
c. research of Access Protection network; do a right-click on the Service for the Protection of network access and click Start.
Method 2: you can check the link to install a printer.
Install a printer
http://Windows.Microsoft.com/en-us/Windows-8/install-a-printer
Method 3: you can check the link for the troubleshooting steps.
Solve printer problems
Please get back to us and let us know the status of the issue.
-
Error "no network access" on the devices not connected with hotspot Wi - Fi on Windows 8
Original title: wifi hotspot problem not reciving data connected network - windows 8
I have windows 8 simple ASP, when I do a WiFi hotspot it activate and connected to the iphone, lumia or tab, but the data are not recived by any device? they don't show error no network access? What is the problem?
Hello Anwar,
I wish to gather information to help you better:
(1) where exactly you receive the error message "no network access? It's on the phone or the computer?
(2) how do you have enabled connection with devices Wi - Fi hotspot?
(3) you have problems connecting Wi - Fi hotspot on the computer?(4) you receive the same error message with all devices?
If the issue is with Windows phone, post the same question in the forums Windows Phone for assistance. Check out the link:http://answers.Microsoft.com/en-us/WinPhone
If you encounter this problem only with the computer, then respond with more information so that we could help you better.
Answer us with more information that would help us resolve this problem more far.
-
Toshiba NB520 11V - how to install a 3G network access module
Hello
I recently bought a NB520 11V and I was interested if it's possible and how to install a module 3G network access. And if it is possible, what are the specifications of the installation of a 3G network access module I have to buy.
Kind regards
LuisHello
As I know that some of the model supports NB500 is the 3G module but the NB520 does not support 3G.
The 3 G CARD-F3307R2 (900TEG), which is equipped in the NB500 is the number of piece K000124470 (google for it)
But to be honest I'm not very well if this module is compatible with the Mr. NB520 I guess not -
Property of local network access
After installing SP2
insufficient right SP2 to the ownership of network access
Hello
I put t see no problem why Windows XP with SP2 should t works on the Satellite Pro. The Microsoft SP2 includes a large number of bug fixes. In addition the SP2 installs a windows firewall that must be enabled on your device. But that innovation is compatible with all laptops from Toshiba. Like Quad please visit Microsoft site to find an SP2 information.
PS: It would be great if you will write about your unit name and problems with your device.
Good bye
-
In Windows 8 network access protection
How can I activate on the network access Protection in Windows 8?
Driley25,
I understand that you must enable the network access protection feature in windows 8.
Steps below:
1. on the screen type Windows apps services.
2. on the right, click settings
3. on the left side, click local services.
4. the PC will put you on the generic desktop and you will see the box.
5. on the right to scroll down, the ads are in alphabetical order so just head to section N and should see.
Please answer as soon as possible.
Thank you
-
Pavilion laptop g6: Network Access Protection
I have a laptop HP pavilion g6 & my security keeps warning me that my network access protection is turned off & when I click on it - it does nothing it does it - what is the network access Protection & how I turn it on?
Hi robindt,
Same thing here.
-
sound to connect me but a yellow explanation mark appears who says no network access why is it?
See if there is something in there that helps:-
http://www.ComputerActive.co.UK/CA/PC-help/2033224/network-solved
If there is, please voet as useful.
Thank you.
Maybe you are looking for
-
How can I clean my macbook pro 15 "to make it faster?
I have a mac book pro 15 "in the middle of the year 2010. I use since the first day for video and photo editing, and is running to slow down. I never did a cleaning up to it. I want to know what can I do to free up space and clean if it can run smoot
-
Cannot access or download updates with the automatic windows update...
I get this message when I try to download or access automatic updates: "Windows Update cannot currently check for updates because the service is not running." You may have to restart your computer. "Nothing else is affected - I still have access to t
-
The touchpad on my HPG60 moves is not the cursor around
Original title: my cursor is stuck. I have a laptop HP G60 running Vista. My cursor is stuck. He can't move with the touch of the finger or the arrows. Cap lock is off. It started on my Vista so I reinstalled the original backup files from CD to work
-
I almost 1 GB in the folder c: / windows / temp folder. Can I delete the contents of this file while Microsoft Tools makes it not? Problem C: / TEMPThe contents of this folder gets cleaned up by running clean-up program. OK. C: / Windows/ Temp subfo
-
Windows 7 - "Entry Point not found" error when trying to play a game
createAccessible@wxWindowBase@@UAEPAVwxAccessible@@XZ DMC 5 could not be located in the dynamic link library wxmsw28u_core_vc_custom.dll. Separated from -. https://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-gaming/Windows-7-entry-point-not-f