Network, VCS - head of the Orchestra-TS communication ports

Similar Questions

• VCS - C to the VCS-E to manually start the SIP connection

  I have the connection of VCS - C to VCS - E works correctly VCS - C is on the local network and VCS - E is on the demilitarized zone. I'm trying to firewall configuration that correctly based on the documentation. When I add some rules he interrupts the area SIP connection. I have to remove the rules, then restart the VCS - C to get the box to connect again. Is there a way to make the box try again the connection without having to reboot? Yes, I'm a noob to this, forgive me if the terminology is not correct.

  Fur

  The VCS - C must always try to connect again. Maybe its your firewall / nat between the two

  who behaves strange here.

  In general, if you allow outbound communication of c with the e and the answer to

  You should be fine.

  Best regards, forcing the reestabishment of the connection, you can go to the client area of course

  on the vcs - c, set the sip to off mode, save, enter the updated area again, set it to the suite and save.

• Three computers networked fine then suddenly the error message «...» Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "

  I had a network that worked very well with three 2 computers running Windows XP Professional and Windows XP Home Edition 1. Suddenly, the network has just stopped allowing certain communications giving the above error message (I have another thread address with XP to Vista computers). The main computer with XP Pro, I'll call A, the second computer with XP Pro, I'll call B and third with XP Home will be C. All computers can share files and printers then without any changes to the system that occurred the following:

  A can access the documents and printers on B and C

  B may NOT have access to documents or printers on one, but access to documents and printers on C

  C cannot have access to the documents on one, but CAN access A printer and CAN access the documents and printers on B

  When access is denied error message is displayed:
  "\\A\My documents is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. Not enough server storage is available to process this command. "(\\A\ being the computer that I am trying to access)

  As I said access from all computers on this network was working fine a week ago and there has been absolutely no changes made to the network. I checked the following

  1. workgroup name on all computers are the same
  2. file and printer sharing are enabled for all computers.
  3. all computers may been from each computers just denied in some cases.

  The firewall that runs on all three machines is AVG and there were no changes to the one last week, but I checked that sharing is allowed.

  I even tried to run the Configuration Wizard from the network on all computers to see if it works, but the same exact problems occur after doing this.

  I met this problem now THREE times. I can't believe that I'm the only one who has this problem and I can't believe that there isn't a solution for it. None of the Microsoft documentation has even a hint of a solution for this specific problem.

  I need a solution that closes completely the network at my church, and they cannot afford to buy printers and others for each of their computers.

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on A computer.
  Boulder computer Maven
  Most Microsoft Valuable Professional

• Need help setting up a network home wireless to the working group. I tried everything I read and nothing has worked. I got lost.

  I just received a more recent laptop and wants to set up a network so I can transfer files back.  It seems that it would be a fairly simple network to set up, but obviously I'm missing something.

  It must be a wireless network.  I have a wireless router, two Toshiba laptops, running a Windows 7 and the other runs Windows 10, and I have a printer.  I can access internet with laptops or both if the router does not seem to be the issue.

  I read articles that said I had need of a homegroup, but that did not work.  Then I read an article saying since my computers running different operating systems, that I couldn't use a homegroup that I should use a workgroup.  I followed the instructions given in the article and which don't seem to work either.

  The names of working group on both computers are the same and so are the passwords.  The computer names are different.

  I was on the old computer and when I go into Windows Explorer, under network, I can see the two names listed, however, when I click on the other computer, I get a message saying that the computer is not on the network.  I got the internet service at the time so the router was working.  Another time I tried to copy a small file to the other computer and the message said I didn't have permissions to do so.  I got the same message when I tried to add a folder to the other computer in the network area in Windows Explorer.  I get the same types of messages when I try things peers, while on the new computer.

  Any suggestions would be greatly appreciated.  So far, since I got the new laptop, I spent nearly three weeks, trying to get things to work.  This seems to be the biggest challenge of all.

  Hi Carole,

  Thanks for posting your query in Microsoft Community.

  Let me suggest you refer to the article below which will help you to set up HomeGroup from start to finish.

  Homegroup from start to finish

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• scalable design vcs-e for the clients of MPLS and internet

  Hi all

  I think of an evolutionary design of VCS-highway in a service provider architecture.

  Some clients reach vcs-e across one MPLS network, another customer over the internet (each client with its own vcs - c).

  I have a vcs-e with dual NICs and nat enabled.

  VCS - e is a private network.

  In this architecture, if I nat vcs-e in one public ip address, I can't inject the public IP address in the VPN client (clients use the address private, and anyway, they will not receive a public IP, MPLS and the internet). And I can't inject a private Internet ip address. In addition, every customer wants to use an ip address of vcs - e compatible with their plan ip... then maybe customer wants to use an address of 172.31.x.y and a B client an IP address of 192.168.x.y.

  Best solution would be to nat vcs-e address in different ip address for each client / internet through the firewall, for example vcs-e 10.1.1.1 in 172.31.24.1 for the customer has, in 192.168.24.1 for client B and 80.x.y.z for the internet, according to the firewall context... but I'm not sure that I can do (I can? I think I can only the ip address of nat vcs-e statically 1 to 1).

  I am attaching a figure illustrating the design of the network.

  Any suggestion?

  Hello

  In your design, it is allowed to do NAT between VCS - C and VCS-E if you configure using links/box of course, which I think is what you plan to do. A nearby area will fail in this design.

  If your customer can have a VCS - C on their private network and that you connect to your VCS-E through a NAT firewall as you describe as the "best solution".  There is no need to NAT any return to the client IP address, since the VCS - C will make an outbound connection only for the VCS-E.

  Robert

• Win 7 network users cannot push the desktop files

  Hi - I have W7HPx64 on the table, and descendants both have Jason with W7HPx64.  Marcot on WLAN, the office is on ethernet.  I've set up a "home network", but establishing a "homegroup" appeared to leave me with a lot of side effects, so I went to the old-school working group I had on W2K Pro who never gave us difficulties.

  The problem is that after having shared folders on the desktop and on the Marcot, we can push/pull files to/from the Marcot, but the Manon can't push the files to the desktop.  They can specify good files.

  At the moment that I simply do not understand the configuration of permissions very complicated W7 inherited from XP.  I can not even find a 'group' for the hosts on the local network: to get any form of communication, everyone had to be set up as a 'user' so that we can log on to remote computers.  I'm also confused by a difference between 'share with... '. "in the context menu for folders and files (which is currently attached to"nobody"(I think) and properties > sharing.)

  Logon is not a problem.  Only by pushing the files on the desktop.  Please, can someone direct me to a place where W7 permissions/security/sharing is explained in words of one syllable or less?

  Gordon.

  Hi Gordon,.

  I'm sorry to hear that you are facing issue to push the files to the users of the network. We defer the steps described in the following Microsoft help articles. I'm sure this will help you to solve the problem.

  Networking of computers running different versions of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Learn about the home network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows/explore/get-to-know-home-networking

  Please do not hesitate to answer if the problem persists, so that we can better help you.

• Database does not start... ALTER database open; change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

  HI during startup of the database of the following errors is. Please help solve the problem.

  SQL > alter database open;

  change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

  ============================================================

  Please see the alerts log entries

  --------------------------------------------------------------------------------------------------------------------------------

  Commissioning:

  Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

  With the options of partitioning, OLAP, Data Mining and Real Application Testing.

  Using parameters in spfile D:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEATTNDPRD server-side. ORA

  Parameters of the system with default values:

  process = 400

  sessions = 624

  memory_target = 4G

  control_files = 'D:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB0M_. CTL.

  control_files = 'C:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB13_. CTL.

  DB_BLOCK_SIZE = 8192

  compatible = "11.2.0.0.0."

  log_archive_format = "ARC%S_%R.%T."

  db_create_file_dest = 'D:\oracle\oradata. '

  db_create_online_log_dest_1 = "D:\oracle\oradata".

  db_create_online_log_dest_2 = "C:\oracle\oradata".

  db_recovery_file_dest = 'C:\oracle\oradata\flash_area. '

  db_recovery_file_dest_size = 8G

  undo_tablespace = 'UNDOTBS1.

  Remote_login_passwordfile = "EXCLUSIVE."

  db_domain = «»

  dispatchers = "(PROTOCOL=TCP) (SERVICE = ATTNDPRDXDB)" "

  audit_file_dest = "D:\APP\ADMINISTRATOR\ADMIN\ATTNDPRD\ADUMP".

  AUDIT_TRAIL = 'DB '.

  db_name = "ATTNDPRD".

  open_cursors = 300

  diagnostic_dest = "D:\APP\ADMINISTRATOR".

  Sun 24 May 13:43:09 2015

  PMON started with pid = 2, OS id = 5792

  Sun 24 May 13:43:09 2015

  VKTM started with pid = 3, OS id = 6500 high priority

  VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

  Sun 24 May 13:43:09 2015

  GEN0 started with pid = 4, OS id = 13072

  Sun 24 May 13:43:09 2015

  DIAG started with pid = 5, OS id = 1424

  Sun 24 May 13:43:09 2015

  DBRM started with pid = 6, OS id = 8240

  Sun 24 May 13:43:09 2015

  PSP0 started with pid = 7, OS id = 2980

  Sun 24 May 13:43:09 2015

  DIA0 started with pid = 8, OS id = 12956

  Sun 24 May 13:43:09 2015

  MA started with pid = 9, OS id = 13356

  Sun 24 May 13:43:09 2015

  DBW0 started with pid = 10, OS id = 14248

  Sun 24 May 13:43:09 2015

  DBW1 started with pid = 11, OS id = 17900

  Sun 24 May 13:43:09 2015

  LGWR started with pid = 12, OS id = 5564

  Sun 24 May 13:43:09 2015

  CKPT started with pid = 13, OS id = 16736

  Sun 24 May 13:43:09 2015

  SMON started with pid = 14, OS id = 14068

  Sun 24 May 13:43:09 2015

  RECCE has started with pid = 15, OS id = 16288

  Sun 24 May 13:43:09 2015

  MMON started with pid = 16, OS id = 10884

  commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

  commissioning or shared server 1...

  Environment ORACLE_BASE = D:\app\Administrator

  Sun 24 May 13:43:09 2015

  ALTER DATABASE MOUNT

  Sun 24 May 13:43:09 2015

  MMNL started with pid = 17, OS id = 16128

  Mount of redo thread 1, with mount id 3325657453

  Database mounted in exclusive Mode

  Disabled lost write protect

  Completed: ALTER DATABASE MOUNT

  Sun 24 May 13:43:23 2015

  change the database open

  Sun 24 May 13:43:23 2015

  LGWR: FROM PROCESS ARCH

  Sun 24 May 13:43:23 2015

  Arc0 started with pid = 21, OS id = 10084

  Arc0: Started archiving

  LGWR: FROM PROCESS ARCH COMPLETE

  ARC0: FROM PROCESS ARCH

  Sun 24 May 13:43:24 2015

  Arc1 started with pid = 22, OS id = 18400

  Sun 24 May 13:43:24 2015

  ARC2 started with pid = 23, OS id = 17280

  Arc1: Started archiving

  ARC2: Started archiving

  Arc1: become the "no FAL' ARCH

  Arc1: become the "no SRL" ARCH

  ARC2: Become the heartbeat ARCH

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

  ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

  ************************************************************************

  You have choice to free up space in the recovery area:

  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

  then consider changing POLICY of DELETE ARCHIVELOG RMAN.

  2 back up files on a tertiary device such as a tape with RMAN

  SAFEGUARDING RECOVERY AREA command.

  3. Add space drive and increase the db_recovery_file_dest_size setting to

  reflect the new space.

  4 remove the unnecessary files using the RMAN DELETE command. If a service

  the system control has been used to remove the files, and then use the RMAN DUPLICATION and

  Commands DELETE has EXPIRED.

  ************************************************************************

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

  ORA-19809: limit exceeded for file recovery

  ORA-19804: cannot recover disk 44571136 bytes limit 8589934592 space

  ARCH: 19809 error creating archive log file to ' C:\ORACLE\ORADATA\FLASH_AREA\ATTNDPRD\ARCHIVELOG\2015_05_24\O1_MF_1_10343_%U_. ARC'

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

  ORA-16038: log 2 # 10343 sequence can be archived

  ORA-19809: limit exceeded for file recovery

  ORA-00312: wire 2 1 online journal: ' D:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYD8B_. JOURNAL"

  ORA-00312: wire 2 1 online journal: ' C:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYDF6_. JOURNAL"

  USER (ospid: 10400): put an end to litigation because of the error 16038

  Sun 24 May 13:43:24 2015

  ARC3 started with pid = 24, OS id = 2188

  Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_arc2_17280.trc file:

  ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

  ************************************************************************

  You have choice to free up space in the recovery area:

  1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

  then consider changing POLICY of DELETE ARCHIVELOG RMAN.

  2 back up files on a tertiary device such as a tape with RMAN

  SAFEGUARDING RECOVERY AREA command.

  3. Add space drive and increase the db_recovery_file_dest_size setting to

  reflect the new space.

  4 remove the unnecessary files using the RMAN DELETE command. If a service

  the system control has been used to remove the files, and then use the RMAN DUPLICATION and

  Commands DELETE has EXPIRED.

  ************************************************************************

  Instance of stopped by USER, pid = 10400

  --------------------------------------------------------------------------------------------------------------------------

  Regarding

  Ngoyi

  Hello

  Now it works very well... with following

  --------------------------------------------------

  using sqlplus

  • Startup mount
  • ALTER database noarchivelog;
  • ALTER database open;

  -------------------------------------------------------------------------------

  Concerning

  Ngoyi

  -------------------------------------------------

• Column header in the interactive report with special characters

  Interactive column heading in the report sorting and filtering is broken when I used special characters in it.

  Column sorting options appear in the wrong place and the page becomes unresponsive.

  Cause: I use a slash "/" in my query and who broke it. I tried ampersand and the same problem exists.

  Query: Select project name, status ' Open/closed' projects;

  This problem does not exist in the classical report, but only in interactive report

  Version: Apex 4.2.4

  Here's a demo app with the problem I'm talking about. Trying to sort the column entitled ' open/closed '.

  http://Apex.Oracle.com/pls/Apex/f?p=12289

  U:testuser

  P:test

  The issue is identical to an another forumn.

  https://community.Oracle.com/message/11156426

  However, I have just created this new discussion with the hope that this minor bug might be fixed in the next version of the apex.

  During this time, no workaround or suggestions are welcome.

  I tried to make the column "Remove HTML and special characters", but that did not help. I think I have a header of column with some special characters is a pretty basic requirement apex should support.

  Hello

  I guess simple fix is that not not to use the query column aliases where is /.

  But you can use ' Open/closed' as an attribute of the column header.

  Kind regards

  Jari

• My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  My iPhone can connect to the computer via Wifi instead of cable? Because I figured that my head of the telephone cable i have problem if the computer cannot detect my folder after plugging in the cable.

  Sync your iPhone, iPad or iPod touch with iTunes using a WiFi - Apple...

• How can I copy a normal header in the windows clipboard

  I can morgane the full header easily enough by "view source", but I just want the, to, subject and date (I'll take the answer to also).

  In MS Outlook, I click on to the front and then copy the header of the composition window where it appears above the message I submit. It's fast and then I just delete the message from project.

  -What works in Thunderbird?

  (Who has since received (Date/time), and subject, but not Reply-to, at least in the case of a vision forward.)

• Full header in the message body while all the CT 38.0.1 mail forwarding

  I've recently updated my TB to version 38.0.1, with only an extension like below;

  1. compact header 2.0.1
  2 conversations TB 2.9.1

  the problem is while shipping all mail, the full header of the last mail is automatically sees the body of the message that decreases the size of the longest mail & making it so confuse recipients.

  How can I get rid of this...!

  View | Headers | Normal.

  I suspect that yours is set to "All".

  This setting affects the display, printing, you answer and shipping.

• Why do I get the message 'a network error occurred during the processing of your order'?  I was able to print an album without problem about a month ago

  I am trying to print a photo book, but get the message "a network error occurred during the processing of your order.  Please check your network connection and try again.  I had no problem with the printing of a book about a month ago.

  Start in Safe Mode, Mac OS x: Safe Mode bootand try to order from there.

  Don't forget to check out the book before ordering this Apple; Get an overview of a project on paper in Photos, iPhoto or Aperture to avoid problems - Apple Support. Save the PDF to be compared with the printed version when coming out.

  

• I can connect to the local network, but not to the internet

  Why in an internet connection, I can connect to the Local network, but not to the Internet.
  I have valid IP address and configuration is good.

  I recommend you read some threads here in the forum about similar issues.
  If this problem occurs using the WiFi network, then check if you can use the connection to the local network.
  Using the WiFi network, you must check if the common WLan parameters are favourable;
  Check if the encryption key is right; turn off filtering by mac address, check the TCP/IP protocol settings if it has been set to automatic, disable the firewall settings, rest you WLan router, check if you connected to the right SSID.

  Good bye

• Satellite Pro L100: Wireless network card cannot find the Wlan router

  Hello

  I just bought a Toshiba Satellite pro L100, which has a built in wireless card, an Atheros AR5005g. I activated the card wireless via the switch on the laptop, and then I let the search for available networks. She is 4-5 or secured creditor and unsecured networks in my area, but it does not find my router which is about 3 meters from the hotel!

  I tried to manually configure my network to see if the laptop can locate it, but without success. I've used a network card in my last laptop, a Belkin 802.11 g that I then inserted in the excellent connection laptop and bingo to 54mps. But I want to use the integrated wireless card that captures an unsecured somewhere network in my area but the signal is weak and is very slow.

  Can someone help me please? The router that I'm trying to access is a Netger WGR 614. NETGEAR were not useful.
  Rgds,

  Richard.

  Hello

  First of all I want to say that for these questions there is not a magic solution.
  I think that you need to check many options that could have a negative influence on the WLan connectivity.
  First of all, you should check if the Wlan router supports WLan standard even as the Wlan card. For example 802.11 B or G or both

  Disable all ciphers on the router as well as the MAC address filtering.
  Then check the WiFi channels! Try to use the same channel on the map of local area network on the router.

  Which driver do you use? Try to download the latest WLan driver Atheros site.
  I think the Atheros provides the own local network configuration utility. Try to use it.

  As you can see, there are many options that must be verified

  Additional information:
  Also, one of my notebooks is not able to connect to the router because I use a WLan router that supports a 802.11 BG WLan standard and in my book the AB 802.11 card has been installed.
  So I can't connect to the router ;(

• Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please? I can provide screenshots.

  Does anyone know why my iMac G5 osx10.5.8 suddenly developed continuous small networks of lines on the screen please?

  I tried to provide screenshots - insert an image does not accept.

  

  

  Just happened while the iMac was asleep.

  Thanks in advance

  Tony

  The image seems to reflect the possibility of problems of graphics processor.

  Some models had a history of failure or bad solder connections. others may

  have a combination of capacitors & other materials; Finally we have to fix.

  https://DuckDuckGo.com/?q=imac + 24 - anomalies graphics + 2008 + in +& t = ffsb

  One of the remedies for a graphics card problem, is a re - weld made by the

  users who have taken their card from the computer & their cooked in the kitchen oven.

  This idea has worked for some; You may be able to contact an authorized Apple

  Service provider or see if any of the parts suppliers in line can answer questions

  availability of replacement given to nine graphics cards, if you were

  can be removed from the logic board or if it is affixed, or welded to the card.

  An iFixit.com repair guide for your series of iMac (Intel-processor 2008) 24 inches

  can show that if that article can be virtually eliminated, if if will show process.

  https://www.iFixit.com/device/iMac_Intel_24%22

  The details of the computer in the bottom of your post isn't an iMac G5 model, and

  There is no powerPC G5 processor equipped Macs after late vintage

  2005 to early 2006; If the computer in the discussion is a G5 is not 24 inches

  and would be a model of Intel. They use a different architecture than G5

  powerPC even though in some respects are similar at least in the General design.

  This contains all guide ifixit for iMac G5 Power repair (there is no 24-inch model)

  https://www.iFixit.com/device/iMac_G5

  If you have an iMac with Intel processor and an older iMac PowerPC G5, specify.

  Don't know if a reset of the SMC or likely to alter the symptoms or change NVRAM

  the Visual problem on the screen; an underlying hardware problem is a likely cause.

  • Reset the management system (SCM) controller on your Mac - Apple Support

  • How to reset the NVRAM on your Mac - Apple Support

  If this is your model iMac (24 inch Early 2008) follows the model of generation identifier:

  Introduced April 2008

  Abandoned March 2009

  IMac8, 1 model identifier

  Model number A1225

  EMC 2211

  MB325LL/A order number

  First Prize $1 799 (2.8 GHz) $2 199 (3.06 GHz)

  You may be able to find the numbers of reference and research for replacement new or repaired

  old stock graphics cards. A friend had one of these models of iMac 24 inch 2008 and

  It failed due to a graphic processor; where she lived the BestBuy did not fix

  She even if it has been purchased by them with their extended warranty; No applecare.

  So, there are some out there in almost perfect condition, but not fixed, always.

  Do not know if the charges involved would be the value relative to the other

  later construction that can have no history of similar design construction. {Confirm the identity of the iMac.}

  Sorry I don't have any new ideas regarding this problem.