Network with ESXi 4 VM problem

Similar Questions

• ESXi 6.0 Networking with blades Gen8 HP problems

  Have a few 6.0 hosts on DL380 Gen8 blades. Just improved their work 5.5 - 5.5.2 installs. The two blades Gen8 map of the NETWORK, MAC and the status of the connection addresses. But whatever the config, impossible to get connectivity. DHCP not receive and consider the same if DHCP is required for installations of our PXE. Even tried ISO installs through the ILO. Tried the HP and regular of ESXi 6.0 versions installation. Also made the same way of upgrade on 2 blades DL380 Gen6 and not had any problems.

  Any suggestions?

  Hello

  have you tried upgrading the firmware of your host for the latest versions with HP SPP 2015.04.0 ISO and as you execute the upgrade with the help of the ISO official from the seller? Sometimes, when you have a bad NIC firnware/driver combo, the network stack will not work.

  Good luck!

• Network with VC 2.5 problem

  Hello

  We have a little bit of esx and esxi on our LAN network and everything works well.

  We have also two server on our DMZ network and we have the VC even controlling them, but we are facing a problem connecting. A few minutes after that connection is established are disconnected from the CR.

  On the other hand, if connect us directly to these servers via VI everything works and we don't lose the connection.

  No idea what probably happens?

  Our LAN network is 10.95.96.0/20

  Our DMZ network is 10.95.93.0/25

  The journal of VI and these servers ESX does not display relevant information:

  == & gt; hostd.log & lt; ==

  Event 2201: [email protected] user

  The task was created: haTask - vim.AuthorizationManager.setEntityPermissions - 38414

  Task completed: haTask - vim.AuthorizationManager.setEntityPermissions - 38414

  : Vpxuser of the user

  Event 2202: [email protected] user

  Event 2203: Vpxuser disconnected user

  ..................................

  Any idea what the controls can do?

  Thanks for your help

  Check the firewall

  443 VC to the guests (I guess 902 is upward)

  ESX--> VC, ensure that you allow 27000 & 27010

  You will need to remove and add your ESX DMZ hosts to the CR

• Having problems with ESXi/vSphere Client Network

  First of all, I apologize if it's thread is in the wrong section.

  I recently installed ESXi v6.0.0 in VMware Workstation 12.0 trying to familiarize myself with ESXi as I recently graduated and I forgot most of what I learned from the class I took.

  Then, ESXi installed smoothly and was very painless.

  Then, I tried to create a virtual machine. It's when things are messy. I can't understand why, but I don't get any network connectivity after obtaining a DHCP address to all within the virtual machine, in addition to being able to ping the host ESXi itself.

  First of all, networking is like so:

  10.10.10.1 router/gateway

  10.10.10.254 DHCP, DNS, server, VMware Workstation files 12

  10.10.10.250 ESXi host

  10.10.10.244 ESXi reviews - Windows 7

  Googles DNS 8.8.8.8

  VMware workstation 12:

  AMD FX-8350

  Intel Corporation 82574L Gigabit Network Connection

  NVIDIA Corporation GF119 [GeForce GT 520] (rev a1) - However, not allowed to work with VMware VMware or xvnc throws a fit to this topic

  ESXi host

  Images: 2015-10-04_21-13 - 57.png, 2015-10-04_21-14 - 34.png

  The vSwitch has the following properties:

  Image: 2015-10-04_21-19 - 38.png

  
  

  And the following then occurs on the ESXi prompt:

  Images:,2015-10-04_21-01 - 58.png, 2015-10-04_21-03 - 32.png

  
  

  I can't really understand what the problem is, or what is happening. Yes, I could set up an internal network of the virtual machine with a firewall and what not, but I was hoping that there would already network connectivity while I wouldn't do. Also, is it possible to make attachments online?

  
  

  Thanks for all their help
  

  This could be a problem of permission on the host vmnet adapter, see http://kb.vmware.com/kb/287.

  André

• Strange problem with ESXI 4 e1000 windows 2003

  Hello

  I have a problem with ESXi all my vm will not have access to the Internet with the default E1000 network card...

  I can ping google or any other machine, but not access with ie/firefox. If I set up the virtual machine with vmXnet 3 it work perfect.

  Given that I'm about to convert a win 2000 Server and vmxnet is not supported on this operating system, I'm looking for a solution

  My dns are ok tried with the dns domain by default and open dns

  I can ping google but failed to load the web page

  I can ping my file server, but can not access to search for the file.

  Anyone with an idea.

  Thank you

  Is there a drawback using series vmxnet on all my virtual machine?

  No.... If you have installed VMware tools

  André

• launch of checkers problems: error: trying to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall.

  Windows Vista can not launch problem of checkers: try to re-launch your game. If the problem persists, it may be network with the server problems or a problem with the configuration of your firewall. Please check your firewall settings by visiting the Open Ports FAQ.

  Original title: launch of the problems of checkers:

  Hello

  If you have not yet tried to disable the antivirus/firewall software, then try the following steps to disable them.

  Disable the anti-virus software: http://windows.microsoft.com/en-US/windows-vista/Disable-antivirus-software

  Enable or disable Windows Firewall: http://windows.microsoft.com/en-US/windows-vista/Turn-Windows-Firewall-on-or-off

  IMPORTANT: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

• Problem of memory with esxi 4

  I have a brand new hp dl380 G6 with 2 xeon x 5560 server and 48 GB of ram ddr, it is used in combination with a fiber of msa 2212 hp san chanel.

  The host runs 36 windows virtual xp with each 1vcpu and 512 MB memory.

  given that we have upgraded to esxi 4 almost al my virtual machines are showing the alarm that the memory usage of comments is raw, some off them show same not the warning, but the symbol of the alarm.

  In the virtual machine overview comments mem % varies between 90% and 68%.

  The host mem is also high, always 537 MB.

  The same takes place of issue with the version of virtual machine 4 and 7, vmwaretools is upgraded to version latsest, even with a new installation of a host appaers problem.

  On the same host, we tested with esxi 3.5, we have not had any warning to all mem % comments has been between 2 and 18%

  the host here for most memory less than 100 MB

  Is that a question or there at - it something wrong with my setup?

  Has anyone seen this problem too?

  Concerning

  Sven

  Hi, this is probably related to the Nehalem architecture and how page sharing works: http://communities.vmware.com/message/1264573

• Problem with HP DL 360 G6 with ESXi 4.0

  Dear all,

  We have a HP DL360G6 server and we have installed ESXi 4.0. After that copy us a file to the data store or install a virtual machine, and after that restart the server, the server can not boot and lost everthing. We tried to fix with ESXi Installer and it says that the disc contains "invalid or damaged partition table".

  Thanks for the answers in advance.

  Kind regards

  Kozí

  Mark as resolved thead element.

  If you have found useful messages, then please leave a few points

  André

• Metadata of data user not found! -read the problem of network with Netbeans

  Hi all,
  
  I have Oracle11gR2 and Fedora 13 operating system.
  I have to do the analysis (in the calculation of the shortest path) on a network with IFN.
  I'll use the APIs of LOD, but the network is not yet partitioned.
  Before partitioning, I want to see if Netbeans can read my network. When I run the code to do this:
  

  String url = "jdbc:oracle:thin:@IP_of_machine:1521:dbSID";
  
      try {
  
                  Class.forName("oracle.jdbc.OracleDriver").newInstance();
                  
                  Connection conn = DriverManager.getConnection(url,"italia","italia");
                  System.out.println("Connect to Database");
                  conn.setAutoCommit(false);
     
                  Network net = NetworkManager.readNetwork(conn, "ITALY_NET");
                  System.out.println("Network has been read");

  but the output is:
  
  run:
  Connect to the database
  
  oracle.spatial.network.NetworkDataException: oracle.spatial.network.NetworkDataException: user not found data metadata!
  at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:792)
  at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:552)
  at oracle.spatial.network.NetworkManager.readNetwork(NetworkManager.java:176)
  to calcolopercorso. Main.main (hand. Java:62)
  Caused by: oracle.spatial.network.NetworkDataException: user not found data metadata!
  to oracle.spatial.network.UserDataMetadataImpl. < init > (UserDataMetadataImpl.java:108)
  to oracle.spatial.network.NetworkMetadataImpl. < init > (NetworkMetadataImpl.java:585)
  at oracle.spatial.network.NetworkAdapterSDO.readNetworkMetadata(NetworkAdapterSDO.java:4148)
  at oracle.spatial.network.NetworkAdapterSDO.readNetwork(NetworkAdapterSDO.java:766)
  ... 3 more
  BUILD successful (total time: 1 second)
  
  It has successfully connected to the database, but I have error when it should read the network
  What am I wrong?
  Thank you much in advance.
  
  Published by: crystal13 on Sep 16, 2010 03:05
  
  Note that network has been properly validated:

  SQL> SELECT SDO_NET.VALIDATE_NETWORK('ITALY_NET') FROM DUAL;

  SDO_NET. VALIDATE_NETWORK ('ITALY_NET')
  --------------------------------------------------------------------------------
  TRUE

  It seems that you have probably set user_defined_data 'Y', but do not fill your data defined by the user to the user_sdo_network_user_data.

  Follow these steps:

  select network,user_defined_data from user_sdo_network_metadata where network = 'ITALY_NET';
  

  If user_defined_data is set to 'Y', you can set it to "n" then IFN will no definition of user data search in user_sdo_network_user_data.
  If you intend to use your network user data, you must set user_defined_data 'Y' and
  fill your user data information in user_sdo_network_user_data.

  desc user_sdo_network_user_data;
  

  You can get the user to more data information form the white paper in ndm_whitepaper_11gR2 under the Section of the data defined by the user.
  https://spatial.SampleCode.Oracle.com/servlets/ProjectProcess?PageID=0Zl7oV

  I guess you know you use the API in memory of 10g instead of the API of NDM LOD 11 g.

  Jack

• High latency LDAP with ESXi 6

  We have Gen9 HP with Emulex 10 GB (driver v10.5.121.7) runs the last 6.0 ESXi and high latency experience above 50ms to 1.5 seconds with LDAP queries between continuous Windows or VM to DC.   However, to move the domain controller to an ESXi 5.5/6.0 with the latency of the network 1 Gb is down to below 50ms.  If you ping just two servers, ping response is < 1ms.

  Anyone else having this problem? It seems to happen with ESXi 6.0 with 10 GB Networki.   ESXi 5,5 of 10 GB seems to work very well.

  > 50ms up to 1.8 seconds at the time of the request

  ESXi6 DC VM to ESXi DC VM on the same host, 10 Gb DSwitch

  ESXi6 DC VM to ESXi DC VMS on different host, 10 Gb DSwitch

  < 50ms

  DC - DC physical physical

  ESXi5.5/6.0 DC ESXi5.5/6.0 DC on 1 GB network VM VM (Ping is < 1ms, copying files is > 100MB / s)

  I've checked package drops with esxtop with view network, no packet drops.

  I used the following script to the extent that made 10 requests from a user and takes the average time.

  The result is coherent fairy.

  http://social.technet.Microsoft.com/wiki/contents/articles/26227.how-to-measure-the-response-time-of-your-domain-controllers-when-running-an-LDAP-query.aspx

  When the bare metal servers and vm windows 2012 participate then try disalble rsc in the virtual machine

  Disable-NetAdapterRsc

• Not able to configure the network on ESXi (Dell Optiplex 755), how to get a shell prompt to configure the network card or check?

  Any knows is Dell Optiplex 755 is compitable with ESXi server?

  When I want to install ESX 3.5 update 3 on the Dell Optiplex 755, it detects drive hsrd (WD), I don't know what to do?

  ESXi is detecting disc hard but not able to configure network & with ESX 3.5 update 3 does not detect the hard drive.

  Comment (I have 2 HDD on the system, 250 GB WD & WD 1 TB).

  Help please.

  Kind regards

  Mustafa Rashid

  SATA, who worked at the 2 update driver update changed 3.  So, you may be able to work around the problem of disk with a modified file, you can probably find at vm-help, but you will still need a NIC for networking.

  -KjB

  VMware vExpert

• Network with A60-155

  Having recently acquired this laptop, I tried to transfer files between it and my desktop (os w2k pro sp4) which is already networked with 2 other computers (ME and 98) in the House. Seems the laptop refuses to cooperate.
  I can ping 127.0.0.1, no problem, I can even ping IP of my desktop computer, but the laptop will not ping itself. The same office it detects my home network, but cannot access it. I have a light green and orange when ping of the desktop computer. I installed the latest drivers realtek for local networks (device drivers everything apparently works well)
  With the Office when this is the case I could uninstall the internet protocol (TCP/IP) and put things back by reinstalling, in XP this option is grayed out.

  Any suggestion would be appreciated as I am running out of ideas?

  See you soon

  Eddie

  Hi Eddie

  I guess you have a lot of experience with computer networks, and as you can see this sometimes a strange and inexplicable things.

  I'm sure that all the settings are good, but you can also try to connect your laptop directly to the desktop (peer to peer). On this way, you can check if it is possible to establish the connection.

• Correction of installation Photosmart Wireless with SSID of SigmaplusEOL1 problem

  Hey,.

  I have a Photosmart C4780. I have set up for a little wireless printing back and it worked fine. Recently, I had to reset my router for other reasons, which forced me to set up my printer wireless again.  But I can't too. First of all, I used the Setup Assistant that has been installed on the iMac when I previously installed it.  That did not work.  Then, I just uninstalled and tried to reinstall it back. I tried to implement wireless first. When defective, I tried to set up via USB, and then wireless, which still did not work. The problem I meet is during installation in the Setup Wizard, I get 'Select unit.' My printer is connected via USB, and it appears on the list of devices. I click on "Continue" and the following window is an option that says "Set up your device for a wireless network." I check the box and click "continue." The next window is 'Select Network'. And here the problem comes in. A message appears that says "Device not connected", even if it is clearly. I even tried not to connect the printer via USB until it says "Select Device." But I get the same result. Also, when I click 'OK' to the message, window "Select network" not said no "Wi - Fi network discovered."  I can't do anything on this subject. I tried to reset the settings of the printer, and the printer for 15 seconds unpluggin wireless to reset the printer as a whole. Still having the same problem.  Any help would be greatly appreciated. Thank you in advance.

  Printer: HP Photosmart C4780 computer: iMac late 2009 OS: OS X Lion mountain 10.8.2 router: Netgear WGR614v7

  I finally thought to it! (Sorry I'm answering my own posts btw, but I want to put the solution for someone else with the problem of SigmaplusEOL1). If you have the SigmaplusEOL1 as your SSID when you print the "wireless network Test report", you have NO need to come back (I know it's a hassle for people).  To resolve this issue, follow these steps.

  (1) disconnect your printer.

  2) go to your router's IP address (such as 192.168.1.1 or whatever it is for your router).

  (3) replace the SSID of your wireless network with "SigmaplusEOL1".

  (4) for the security option for your wireless network select None (of the sort that a password is not required to access your wireless network).

  (5) Please turn your printer back and reprint "The wireless network Test report". It should say «No problem found...» »

  (6) the report shall also give an IP address of the printer (under Configuration Summary below). Type this address into your browser to go to the printer setup page.

  7) click on the 'Network' tab at the top.

  (8) under the heading "Connections" in the left pane, click "Wireless (802.11).

  9) click on "Start the Assistant" at the bottom right.

  (10) in the wizard, edit (the SSID and encryption wep or wpsk) password that you want your network to be wireless. So probably everything what he started as before you changed the SSID to SigmaplusEOL1

  11) click on 'Finish' at the end. The page will probably try to keep loading but it won't because you have changed the network settings on the printer. Just ignore that

  (12) back to the IP address of your router and change the SSID and the encryption password for everything what you change printer SSID and password.

  (13) reprint of the wireless network Test report. Admittedly, the SSID is the same as your wireless network, and everything is good.

  That's all. You should be good to go now.

• PowerEdge Raid700 in RD540 with ESXi Thinkserver

  Hello

  I'll put up a hypverisor 5.5 ESXi update 2 on a lenovo RD540. There is a RAID700 controller.

  I use 3 HARD drive in a RAID6 configured with the tool of the bios (Mega RAID LSI)

  The server works fine, but I don't see the healthy of the RAID on the ESXi.

  I don't see the virtual disk, not the adapter of storage or physical disks. If one lose a disc ESXi does not know, I hear only the PIF from the server.

  How can I solve this problem?

  If I use the "Lenovo easy start' to install ESXi RAID adapter will be with ESXi?

  Thank you in advance.

  Concerning

  Arnaud

  Right now, I'm on the WebBios and I can't find where I can configure it

• Message appear conflict of IP address at startup. Another computer already uses the network with the same IP address. How do I cure this?

  When my kids play online on the X - Box I get an error message on my laptop when I start after them. It is said there is an IP address conflict and that another device is already on the network with the same IP address. It does not affect me access internet even if. How can I fix thi.

  Hello

  1. which is the version of Windows installed on the computer? For example, Windows 7, Vista

  2. only the error message appears only when the Xbox is connected to the computer or at both times?

  3. have you made any software or changes to the material on the computer before this problem?

  Please answer these questions and provide additional information so that we can better guide you.