Network WRT610N shares lost in the Bermuda triangle

Similar Questions

• A60, USB, network - the Bermuda triangle?

  Hello

  When using a USB2 external hard drive function (mine is LaCie and I have a lot of friends using different brands), if you have a relatively high network activity, network connections come out. They simply log off for about 10 minutes.

  What happens in a wide area, not limited to a single cable ethernet, port, or a computer. We are a few hundred using this A60-302 in a University campus. A few other hundred users Toshiba A10 do not suffer it.

  Can someone make a comment on this?

  Concerning

  Emre

  Post edited by: sunfury

  Hello

  It's really easy to explain but it can also be caused by a network LAN and in my opinion, there is no reason why it can be caused by the computer laptop or even don. t network card I also use external HARD drive to copy any sensitive data.

  I hope that you n t I have this problem if you copy data from HARD drive to laptop or vice versa. The only thing I can recommend is to check the properties of LAN card on the Advanced tab and compare these settings with friends.

  Good luck!

• When I'm trying to connect to itunes, I get a message on my computer that says, we can complete your itunes application.  The network connection is lost.

  When I'm trying to connect to itunes, I get a message on my computer that says, we can complete your itunes application.  The network connection is lost.

  Try If you can not connect to the iTunes Store - Apple Support.

  TT2

• Why the connection to a local database becomes lost when the network is disconnected?

  I use TestStand 3.1. I have a configuration database on the local drive and I use the option "Log on the Fly.

  The test takes 48 hours and I want to assure you that it will not stop if the network connection is lost.

  If I unplug the network before starting the test, fine. I can plug the network again while the test runs without problem.

  But if the network is connected and I start the test and then disconnect the network of recording on the fly will give an error.

  I narrowed down it to "New USE for database Logging" step in the SequentialModel.seq (process model). If this step is performed with the network connection then the rest of the test needs a network connection.

  Is it possible to avoid this error?  The point of all the local database was to avoid network problems.

  Thank you for your help.

  TDOT-

  I connect you always locally, please try to change it to "localhost\SQLEXPRESS" to see if you can log in and then see if the same problem as you disconnect the LAN causes previous saw.

• surface rt will not share files over the network from the home group

  I added my surface that RT to my network, but is does not share files or a printer

  You cannot access the files or devices on the Surface RT of the network see only compared to the systems default RT.

  There are workarounds, but as one provided is by design.

• I can't get the XP computer recognize the Windows 7 network file share more wireless

  Problem file/network sharing wireless with a professional system XP and Windows 7

  I have 2 computers - 1 with XP and Windows 7 pro upgrade and use a secure wireless network...  I have set up my network on the new computer and can see the files on my new XP computer, but I can't get the XP computer to recognize Windows 7 one.  What should I do?

  Hi Captive,

  
  Method 1:

  I suggest you to check if temporarily uninstall the antivirus software on the computer Windows XP allows you to connect properly.

  But don't forget to install the software after troubleshooting is done such that your computer will be at risk.

  Method 2:
  You can also check the settings of firewall on the windows XP computer. You can check if the ports are opened correctly for the network to connect. See the help link - below
  http://support.Microsoft.com/kb/283673

  Method 3:
  If the problem persists, you can even perform the clean boot on the Windows XP computer and check if you can identify the application that is causing problems in the clean boot state. To perform the clean boot follow step 1, mentioned in the article, below, and then try again checking in this state of boot -

  http://support.Microsoft.com/kb/310353

  If the issue is resolved check what non-Microsoft service or program is at the origin of the problem. referring to article and following the other steps.
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  a. Click Start, type msconfig.exe in the start search box and press ENTER.
  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click on restart.

  I hope this helps.

• ESX 3.5 and I seem to have lost all the networks.

  DL580 G4 with ESX3.5. I've migrated all clients to another ESX Server, but it went a bit strange to say the least.

  After the migration, all the guests off I went forward and add more ram and restarted. Server come OK, tells me the IP address to connect to (static) but that's all.

  I can ping 127.0.0.1, but not static host ip address, I get an error "connect: could not connect to the network.

  If I check the following localions I get zero information in files

  / etc/hosts

  etc/network-scripts/ifcfg-vswif0

  etc/VMware/ESX.conf

  If I try the list of network adapters that I get no NICs in the list, if I have the material list network get hardware type and mac address.

  I see no switch to vmware if I try esxcfg-vswitch - l

  I tried to restart the network and a few other services that I found on Google, now claim.

  If I start using ERD Commander and enable networking I can not use the 2 onboard NICs but can use 2 additional network cards / 4 ports and can ping / map of external drives.

  Hello

  I think it would be a case of corrupted file esx.conf. After the upgrade of the host by adding more ram or anything else, you may need to update the initrd image that you don't have and this translates into the corruption of your esx.conf file. Until that time, that it's the only imagination, I can take.

  Now, there are simple process of recovery of the original esx.conf file. Please see the procedure below.

  #

  Connect to the ESX host with a SSH client, or connect directly to the ESX with KVM console.

  #

  Back up the corrupted file esx.conf using the command:

  CP esx.conf /tmp/esx.bad

  #

  Copy the image into a temporary directory using a command similar to:

  CP /boot/initrd-2.4.21-47.0.1.ELvmnix.img/tmp

  Note: The version of the initrd image is different from the ESX 3.x. If the version in the command / tmp /boot/initrd-2.4.21-47.0.1.ELvmnix.img cp is different, cd to the directory/boot and run the ls command to see your version.

  #

  Decompress the image file using the command:

  CD/tmp

  gunzip - dc initrd - 2.4.21 - 47.0.1.ELvmnix.img > initrd.unziped

  #

  Create a directory and mount the uncompressed image using the commands:

  mkdir initrd

  Mount-o loop initrd initrd.unziped

  #

  Copy the file esx.conf to the directory mounted at/etc/vmware/en using the commands:

  CD/tmp/initrd/etc/vmware

  CP esx.conf/etc/vmware.

  #

  Remove the directory mounted in step 5 by using the commands:

  CD/tmp

  umount/tmp/initrd

  #

  Restart management agents for the changes to take effect.

  Now other solutions could be looking to recreate the Console of the ESX Service and see if that can help you. Procedure is as below:

  On your system, the vswif, vmnic, numbers of vSwitch and network settings are different.

  1.

  Run the following command to list the name of the map of vswif:

  esxcfg-vswif - l

  2.

  Run the following command to remove the adapter vswif:

  esxcfg-vswif - del vswif0

  3.

  Run the following command to list the name of the vSwitch:

  esxcfg-vswitch - l

  4.

  Run the following command to remove the vSwitch:

  esxcfg-vswitch vSwitch0 d

  5.

  Run the following command to create the vSwitch:

  -an esxcfg-vswitch vSwitch0

  6.

  Run the following commands to create ports for vSwitch default groups:

  esxcfg-vswitch - a 'network of the VM' vSwitch0

  esxcfg-vswitch - a "Service Console" vSwitch0

  7.

  Run the following command to create the adapter vswif:

  esxcfg-vswif - add-- ip = nnn.nnn.nnn.nnn-"Service Console" portgroup mask = 255.255.255.0 subnet vswif0

  8.

  Run the following command to verify that the settings in the network file are correct:

  sysconfig cat

  Networking = yes

  GATEWAYDEV = vswif0

  HOSTNAME = Host.domain.com

  Gateway = nnn.nnn.nnn.nnn

  9.

  Run the following commands to list all network cards and associate a vmnic which has a status of site link:

  esxcfg-NICS - l

  esxcfg-vswitch - L vmnic1 vSwitch0

  10.

  Run the following command to verify that the vmnic is associated with the vSwitch:

  esxcfg-vswitch - l

  11.

  IP address ping to verify network connectivity. If the ping fails remove the previous vmnic from the vSwitch and try another adapter that has a

  State of the link towards the top.

  esxcfg-vswitch - U vmnic1 vSwitch0

  esxcfg-vswitch - L vmnic2 vSwitch0

  12.

  Run the following command to change the ID vlan a vSwitch

  # esxcfg - vswitch - p "VM network 1" - v 10 vSwitch0

  13.

  If you make manual changes to sysconfig, run the following command to restart the network service:

  service network restart

  If you find this helpful please mark some reward points for this.

• WiFi lost when the PC is closed

  Hello

  I have a toshiba with a Wireless Linksys network card (PCMCIA) satellite.
  My problem is that when I shut down the computer, it will "sleep" (the computer power saving mode is standby), the network card stops. When I opened the computer just restart the map network turns on but the wifi network is lost!
  The only solution I found to return on the wifi network is to restart the computer...

  Is there a solution to return again without wifi to restart the computer every time?

  Thanks for your help and sorry for my bad English...

  Hello

  Well, I agree with Feliks. It seems that the PCMCIA card doesn't support mode standby or sleep extended. Unfortunately, I don't have an idea what to do but if you want you can disable this function in power management. In this case, if you close it the OS doesn't cover mode sleep or hibernation.

  Good bye

• problem with the yellow triangle without preventing Internet access

  problem with the yellow triangle without preventing Internet access.in across the network!
  all PC go to the internet through TMG and some computers work very well and most of the computers triangle shows yellow and always go online, but the connection it needs to slow down, I do everything from restarting all switches and install new TMG and always exist and place on another line to outside the firewall problem disappear?
  What can I do :(

  Hello
  I advise you to follow the link below for Tech Net where your social networking question will be answered by IT pros.
  You can post/search here
  hope this helps,
  B Eddie

• MP560 on a Mac OS x networking with Windows 7, recognizes the network but does not print text

  I have a Canon Pixma MP560 connected to a MacBook Pro with OS 10.9.5 which is wire connected to the network via a modem from Time Warner Arris TG862 to a Dell Latitude E6410 laptop computer and a desktop computer, Lenovo, which have two Windows 7. The printer is the USB cable connected to the MacBook and works very well. On the Mac in System Preferences > sharing, printer sharing is enabled, the MP560 put highlight and users > 'everyone can print. " and the system of preferences > printers, Scanners & "share this printer on the network" is selected. On the Lenovo and Dell, I installed Hello, and both can 'see' the MP560 and file > print on both, the printer is recognized and activated. BUT she shoots a white sheet; the text is not printed. Obviously there is something that I did not, any box I've unchecked. I'd appreciate any ideas! Thank you.

  A few days after posting here, I asked this question on another Canon Website and learned that in similar circumstances to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh', rather than, as in my case, saw the MP560 connected to the Mac and then sharing with Windows computers.

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• How to see share permissions on the file system - XP Home Edition

  The ultimate goal is to print on printer icon on XP Home Office laptop Vista.  All the network settings are correct.  Currently receive "Access is denied" when you try to connect to the printer.  No problem see the printer in the working group.

  I'm trying to confirm that "everyone" is listed on the list of the permissions for the share "print$" on the XP desktop.
  XP Home doesn't have a GUI for it.  Is it possible to do this through command line?

  Also is it possible to add a user to the permissions for this share through the command line?

  XP Home Edition is no permissions for actions or administrative as shares ' print$.

  All the network accesses are validated by the guest account.  Make sure that the guest account is enabled for network access:

  1. open a command prompt window.

  2. Enter the following command and press ENTER:

  NET user guest/active: Yes Boulder computer Maven
  Most Microsoft Valuable Professional

• Error message 0 x 80004005 Unspecified error trying to connect to either network drives and printers network on the same network or network drives that are on the same workgroup.

  Essentially, this problem started last Friday and I tried all possible combinations and the thing that I know so far about how to solve this problem and I terribly need a solution because I use this laptop in a University to take notes and print them out / store them on the network. Right now I can ping both servers (one is a print server and the other server network file storage), but in both cases, when I try to connect to them using windows Explorer by the name of \\server name\share or \\printserver\ (the other usually allows me to see a table of printers that are in different locations and I choose who I connected to my laptop). The other method, I have tried to use, which works normally and does not now to map the network drive storage is the net use command, if I try this method, I will get a "system error 1231 has occurred the network location cannot be reached". The third method (which is more commonly used I think) is the ability to connect a network drive in Windows Explorer, usually if I use the third method, I get a response from the storage server file asking for user credentials, now I get the same error message as when I try to connect with the first method of.

  The biggest mystery of this all is that this happens regardless if I'm on the wired or wireless, and in both scenarios, I have access to the internet available, but as mentioned above, no access to storage or a network printer.

  * Use at your own risk, but it worked in my case (ensure you know / remember passwords field before doing so).

  If (since) you are using Windows 7 and you suddenly have problems connecting to a resource of the area (especially after a password reset):

  1) go to:->-> advanced user accounts manage user accounts-> manage passwords

  (2) If you see Windows credentials, delete them all.

• Cannot share media to the xbox 360.

  Well, I have window vista pc, connected to a router and then connected to the xbox. Xbox can't find PCs. I went through all the trouble I can find, including measures of fire open all ports associated with the WMP network sharing Service. Everytime I open WMP it says that the network share is disabled, I go through the steps to enable it, and it shows me the xbox, I allow the media to the device, but still cannot connect. When I look in services.msc in Windows Media Player Network Sharing Service is said, he was arrested, I click on start and it gives me an error 1068: the dependency service or group could start. I'm fairly certain that if I can get this service started my media sharing will work... But I don't know how to do... Any help would be appreciated.

  This year last my computer has ceased to connect to xbox, I started to use tversity and that worked very well, but now it does not work yet. :(

  Hi Seemonkey08,

  Check first if the Discovery SSDP and UPnP device host are started. If not started, then try to start these services first and try to start Windows Media Player Network Sharing Service.

  1. log in to your computer as an administrator.

  2. click on start and then click Run.

  3. in the run box, type services.msc.

  4 in Services, find "SSDP and UPnP services device host ", and then verify that the status column is started.

  5. If the services are stopped, double-click services. A window should appear.

  6. in this window, make sure the startup type is "automatic".

  7. click on the Start button in this window to start the services.

  8. check the State of Windows Media Player Network Sharing Service and start the services

  9. close the windows services and see if you can view your media on Xbox.

  Hope this information is useful.

  Jeremy K.
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to use Windows XP mode on a Virtual Machine, cannot share files between the Virtual Machine and host

  Because of the need to run some XP programs, I ordered Win7 Pro and installed a Virtual Machine with XP Mode.

  Managed to get it going somehow, but does not connect to my home network (can't see any other computers, which seems to be common with the host of Win 7, but here, I managed to install quick links to other computers - they will not work in XP Mode), even if the Internet connection is working perfectly.

  In addition, I can't find a way to share files with the host country, drive C appears to be different from that of the hosts with no common points (where it is currently stored beats me).

  I can access a USB key, but only at a price to make it unavailable to the host and the attempt to release his capture when running XP Mode failed.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads