Networked PC is more by seeing each other

Similar Questions

• All network devices can see each other + Windows 7 computer, but machine Windows 7 can not see them

  Hello. Under the network of my machine Windows 8 folder, I can see all the devices on the network. This includes a printer, my computer Windows 7 (what I can access), an Apple TV (from special software), a wireless hard drive, the router and a digital recorder.

  The Windows 7 machine, I can only see the router and the printer. On special software, the Apple TV does not either. When you perform the Windows 8 computer host as a server for the special software, the Windows 7 machine could not see it on the special software. This means that there is something wrong on the Windows 7 this machine is not allowing him to detect other devices.

  In a game of LAN, Windows 7 and Windows 8 computers can't see each other.

  All devices are on the internet and I am posting this from the Windows 7 machine right now.

  Windows 7 and Windows 8 machine are on the same network.

  No device is on a host group and the group home service is disabled.

  Peer networking is enabled.

  Network discovery is turned on.

  Both connections are set to private/Home.

  Originally, the Windows 7 machine has been on his own home group and could be seen by anything. After a few hours, I finally got out of the home group, how other devices could see him then. However, he cannot always see other devices.

  How can I get the Windows 7 machine to see other devices? I am at a loss. Is there a service that I have disabled right now that needs to be enabled? I don't know what to do.

  Hello

  Please contact Microsoft Community.

  Disable the security software and check.

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Also check out the link below and check if that helps.

  Why can I not see other computers on my network?

  http://Windows.Microsoft.com/is-is/Windows7/why-can-t-I-see-other-computers-on-my-network

  If the problem persists, or you have questions about Windows, let know us, we will be happy to help you.

• Computerds see each other in network

  I have install a full edition of windows 7 as homegroup. I'm unable to set up a premiumas House wiindows a memberof this group residential because 2 computers do not see each other. They are plugged into the same linksys 1200 and individually work very well, including access to the internet that is pluged in the same 1200.Time from linksys is the same on both.

  If I use the network troubleshooting it tells me on the computer at home that there is a problem with the DNS that I DO NOT HAVE a CLUE on., on the ultimate computer is no problem. Someone can help me. Thank you

  Paul

  Just as a test, if you disable both firewalls PC, NOT the firewall routers, but the built-in PC Windows Firewall. can we 'see' and connect them then?

  Try to flush the DNS - http://www.pcworld.com/article/245506/how_to_fix_your_windows_7_network.html

  Have you seen and tried the "fixit"? - http://windows.microsoft.com/en-US/windows7/Why-can-t-I-join-a-homegroup if you haven't tried, it can help hopefully.

• What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

  You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

  Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

• Computers can't see each other after the installation of E3000

  I found several previous posts about my question, but none of them have led me to a solution to my problem. Here's my problem. I have a small home network that I could share files and printers on now I bought for and install a Cisco E3000 and my computers do not see each other. My current configurations is as such: I use DSL and you have an ADSL modem to 2 wires with wireless capabilities. This particular modem has a port for the telephone line and a local Ethernet port. I took the local ethernet and plugged into the internet port of the E3000. All computers can access the internet, but they cannot see. I checked that the file sharing and printers is enabled on all computers. In fact, if I remove the E3000 of configuration and place them on the 2wire wireless connection they see each other. So I'm pretty sure that the firewall on each PC software will allow file and printer sharing. Which leads me to believe that my problem is in the E3000. It blocks perhaps the Protocol of network discovery or something. Does anyone have ideas how I can fix this problem? Any help is appreciated.

  Well, I solved the problem by returning the router to the retailer and Exchange to another router. Now, all network shares working. Consider the problem solved.

  (Mod Note: under the guidance of the compliance of the directive.) (Thank you.)

• Two Dell on Win XP computers can't see each other through router

  I have a Dimension E310 and a Dimension 2350 running Win XP Pro, which were hard times plugged into Vonage/Motorola router. I have a Lazerjet 4 on 2350 and I also have 2 printers more on the 310 and was able to print on any printer of each machine, I replaced the Motorola with an Airlink 101, before moving, I could also access from and to a machine with limited success (the 310a hung up when I tried to run a program that has been on the 2350)

  My question is "can I USB to USB hard wire these two machines together in addition to the router or is there something more easy, because neither machine will see each other through this router?

  Several years ago, I installed software and LAN cards in two machines and was able to see and map the other drive as if each machine had two hard drives and is exactly I wish that these two machines to operate.

  Two of these machines are set up 5 feet from each other and only my wife and I run them.

  Any help would be greatly appreciated.

  
  

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• PIX 515 with several interfaces see each other

  Hello

  I realize that this question has been asked in different ways, but I have yet to see my way. My problem is we have a pix515e with 6 interfaces, all interfaces can go out to the outside world very well, but they can not cross to the other. We do not have any router behind them, we 10.0.0.1 and 10.0.1.1, etc. as interface id how to see the other side of the other I need 2 interface see interface servers and even inside. Also how can I get ip addresses translate. for example we have a mail server on the inside interface with 10.0.0.60 translated in X.X.X.60 on the external interface if the outside world can see. Computers of the interface 2 see this machine as X.X.X.X.60 not the fact that it is on the interface right next to her, and therefore can not find. Inside machines translated at 10.0.0.60 address please help. and I hope that this can be done without routers behind the pix.

  Sincerely

  Jim Kiddoo

  Hello

  is it possible to display your config? It would be much easier :-)

  Please replace the public ip and remove the passwords. Thank you!

  Kind regards.

• I tried to set up a homegroup, but the system cannot see each other.

  I tried to set up a homegroup

  I tried to set up a homegroup with my netbook (windows 7 starter edition) and printer, Pc (windows 7 Home premium). PC and printer were already on this residential group.

  The other was found nor a computer. I run the troubleshooter homegroup several times without success.  I have Norton antivirus installed on both computers. Would be Norton prevent computers find each other?

  Thank you

  Thank you for your response. In the end, I didn't turn off norton. I tried again and it worked.

  concerning

• Windows 8 and Windows RT can't find/see each other on the same network

  My problem is very simple, but I can't for the life of understand me.

  I have a Windows 8 PC and a tablet of Surface RT, they are both connected to the same network but I can't connect to the home group. I am not able to see computers, when I click on networks so connected devices.

  When I disable the security of password of my router, everything seems to work properly. I don't want to leave my network available to everyone however. so as soon as I put a password on my router now I can't pick up devices and home group. I tried to change my network advanced setting but who just so used to work. I don't know what there is to do.

  This is for both of my devices, I don't want to leave my router without protection. Is there a way to fix this?

  I think I found the answer to the problem. I went to HomeGroup settings on my PC and on my Surface and I checked everything on making default setting the private setting may be available on the network.

  After that, I went to make sure that the firewall on my computer has been set to its default value. Then I went to check my firewall antivirus (BitDefender) and noticed that the network was listed in public, that's why I could not pick up other computers.

  So I checked the network in order to be under this judgment in Bitdefender and everything seems to work now. My surface to pick up the computer and the home group.

  Check your anti-virus firewall settings, perhaps that is the reason.

• Have 2 pc share a modem on the cable network. DON'T want NO pc is to see each other remotely. How we prevent that

  Also how to detect if pc1 'spy remotely on pc2.

  Moved to Windows Networking forum area.

  -steve

• Computer Xbox 360 Media Extender and Windows 7 do not 'see' each other

  I had been successfully streaming from my PC content (32-bit) of Windows 7 to my XBox 360 (60 GB HD) since late 2009.  They are connected by Ethernet 100 Mbit/s via a 100 Mbps 3Com switch unmanaged and a Siemens ADSL gateway/router with a switch to 4 ports.  I use not media Extender functionality every day.  Its more like I use it for a week (after I have come back from vacation and want to see my photos and videos), so I use it for about 2-3 months.  Everything I do is press the green button on my remote to turn on the XBox and connect to Windows 7 Media Center.  I don't even bother to turn on my PC like the XBox, it wakes up for me (love it!)

  I modified it used successfully in mid-December 2010, but when I tried to use it again on 28 Dec XBox stated that he could not find the Windows Media Center computer.  I ran the diagnostics of XBox with no luck.  The XBox can detect and connect to my laptop (also under Windows 7 and is connected via WiFi), but it does not detect my PC.

  On my PC, the Extender both in the window "Devices and printers", in Media Center, presented with an exclamation icon and a message saying that the Extender is set up but can not be found.

  The only thing I changed on my PC since the last time the Extender has worked:

  (1) I removed the password on my user account

  (2) I turned off password protected sharing

  I noticed that some security updates have been implemented as well.

  Even if my laptop (that the XBox can still detect) was already configured with no user password and no password protected sharing, I reversed manually these settings on my PC.  This did not help.

  I tried an article that describes the removal of the certificate and add the Extender - no change.

  I tried to disable the firewall of Windows (the only firewall installed on my computer) and Microsoft Security Essentials, as long as my agent for LogMeIn - no change.

  Fortunately, I still had a restoration which dates back to the changed Extender worked, and restored at this point.  The Extender has worked once more... for a few weeks.  I thought that the problem would be back because I didn't really know what caused it in the first place.

  When the problem is back, I read a lot of articles, including those on this forum.  Some suggest specific problems with Asus computers equipped with software installed at the factory, creating a problem, or fingerprint scanners or memberships of domain.  None of them apply to me.  My PC worked loyally with the XBox as I first put in place in late 2009.

  So I went more drastic.  Two weeks ago, I rebuilt the PC from scratch.  I have not yet installed as much software as it was originally - just the basics like Office, Acrobat Reader, Picasa, iTunes, Java, Flash, Google Earth and LogMeIn...  Of course the Extender reworked... twice.  The next time I tried to use it, it wouldn't.

  I tried several restore points - this time, none of them brought the feature.

  Of course, thanks to all this the XBox can still detect my laptop which has also received updates from the Windows Update service (if only my laptop could host all of my pictures and videos...).  My laptop also has the same software, including the firewall of Windows, Microsoft Security Essentials, LogMeIn, etc...)

  This makes me think of something on the Windows 7 PC is blocking incoming or outgoing (or both) types of communication to the XBox.  What kind of diagnostic tools could use to figure out what is the cause.  If I have to sniff the network, what I'm looking for?

  I have reviewed the issue of abandonment and just buying a NAS that supports the XBox Media Extender, but:

  (a) none of the products in my price range offer the features AND performance, I want to

  (b) why should I have to?  He worked for nearly a year, and this feature must be a utility "solid."

  Thank you...

  Hi Umesh,

  Thank you for you answer.  I had already read the article you recommended, but I saw her again (especially step 3) to ensure that I had done everything I could.  There is no recommendation in this article that applied to me, or had already been tried.

  I took another look on my laptop that the 360 can detect and noticed that he was not part of a homegroup, but offered to join the homegroup organized by my Media Center PC.  I was surprised because before the reconstruction and after reconstruction, I don't remember setting up a homegroup.  Of course a homegroup has been partially install (he said my I had no libraries selected for sharing).

  I left the homegroup, and this restored PC allows my Media Center to 'see' the XBox 360 media extender.  My problem is solved (for now).

• SG500 layer 3 - VLAN can see each other devices Vlan9 <>- Vlan13

  Hi all!

  I guess I'm missing something simple here:

  Basic configuration: two SG500 stacked switches in layer mode 3 who should do the routing. LANCOM WLC with access Internet COOL tied up in the trunk.

  As for my understanding, I wouldn't be able to see Vlan13 of Vlan9 devices. But unfortunately, I don't have.

  Any help is appreciated. Thank you!!!

  config-file-header
  switch0908fa
  v1.3.7.18 / R750_NIK_1_35_647_358
  CLI v1.0
  define the system mode router queues-mode 4

  SSD of encrypted file indicator
  @
  SSD-control-start
  config of SSD
  control of password file unrestricted SSD
  no control of the integrity of the file ssd
  SSD-control-end cb0a3fdb1f3a1af4e4430033719968c0
  !
  database of VLAN
  VLAN 46, 91-9-99
  output
  Add a voice vlan Yes-table 0001e3 Siemens_AG_phone___
  Add a voice vlan Yes-table 00036 b Cisco_phone___
  Add a voice vlan Yes-table 00096e Avaya___
  Add a voice vlan Yes-table 000fe2 H3C_Aolynk___
  Add a voice vlan Yes-table 0060 b 9 Philips_and_NEC_AG_phone
  Add a voice vlan Yes-table 00d01e Pingtel_phone___
  VLAN voice Yes-table add Polycom/Veritel_phone___ 00e075
  Add a voice vlan Yes-table 00e0bb 3Com_phone___
  The dhcp server IP
  network IP dhcp pool P_1
  address 192.168.0.10 low high 192.168.0.254 255.255.255.0
  Infinite rental
  94.200.200.200 DNS server
  output
  network IP dhcp pool P_9
  address 192.168.9.10 low high 192.168.9.254 255.255.255.0
  Infinite rental
  94.200.200.200 DNS server
  output
  network IP dhcp pool P_13
  address 192.168.13.20 low high 192.168.13.254 255.255.255.0
  Infinite rental
  94.200.200.200 DNS server
  output
  no host start auto-config
  Hello interface range vlan 1
  hostname switch0908fa
  No complexity of passwords allow
  username privilege 15 7af78c911d5b48bea1dc2449d9d89513abeb4be5 encrypted password cisco
  name-server IP 192.168.0.5
  querying domain IP 18
  no service-CPU usage
  !
  interface vlan 1
  the IP 192.168.0.1 255.255.255.0
  no ip address dhcp
  !
  interface vlan 9
  name V_9
  IP 192.168.9.1 255.255.255.0
  !
  interface vlan 10
  name V_10
  !
  interface vlan 11
  name V_11
  !
  interface vlan 12
  name V_12
  !
  interface vlan 13
  name V_13
  192.168.13.1 IP address 255.255.255.0
  !
  interface vlan 14
  name V_14
  !
  interface vlan 15
  name V_15
  !
  interface vlan 16
  name V_16
  !
  interface vlan 17
  name V_17
  !
  interface vlan 18
  name V_18
  !
  interface vlan 19
  name V_19
  !
  interface vlan 20
  name V_20
  !
  interface vlan 21
  name V_21
  !
  interface vlan 22
  name V_22
  !
  interface vlan 23
  name V_23
  !
  interface vlan 24
  name V_24
  !
  interface vlan 25
  name V_25
  !
  interface vlan 26
  name V_26
  !
  interface vlan 27
  name V_27
  !
  interface vlan 28
  name V_28
  !
  interface vlan 29
  name V_29
  !
  interface vlan 30
  name V_30
  !
  interface vlan 31
  name V_31
  !
  interface vlan 32
  name V_32
  !
  interface vlan 33
  name V_33
  !
  interface vlan 34
  name V_34
  !
  interface vlan 35
  name V_35
  !
  interface vlan 36
  name V_36
  !
  interface vlan 37
  name V_37
  !
  interface vlan 38
  name V_38
  !
  interface vlan 39
  name V_39
  !
  interface vlan 40
  name V_40
  !
  interface vlan 41
  name V_41
  IP 192.168.41.1 255.255.255.0
  !
  interface vlan 42
  name V_42
  !
  interface vlan 43
  name V_43
  !
  interface vlan 44
  name V_44
  !
  interface vlan 45
  name V_45
  !
  interface vlan 46
  name V_46
  !
  interface vlan 91
  name V_91
  !
  interface vlan 92
  name V_92
  !
  interface vlan 93
  name V_93
  !
  interface vlan 94
  name V_94
  !
  interface vlan 95
  name V_95
  !
  interface vlan 96
  name V_96
  !
  interface vlan 97
  name V_97
  !
  interface vlan 98
  name V_98
  !
  interface vlan 99
  name V_99
  !
  interface gigabitethernet1/1/1
  switchport mode access
  !
  interface gigabitethernet1/1/2
  switchport mode access
  !
  interface gigabitethernet1/1/3
  switchport mode access
  !
  interface gigabitethernet1/1/4
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/5
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/6
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/7
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/8
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/9
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/10
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/11
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/12
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/13
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/14
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/15
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/16
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/17
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/18
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/19
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/20
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/21
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/22
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/23
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/24
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/25
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/26
  switchport mode access
  switchport access vlan 9
  !
  interface/gigabitethernet1/1/27
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/28
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/29
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/30
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/31
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/32
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/33
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/34
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/35
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/36
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/37
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/38
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/39
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/40
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/41
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/42
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/43
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/44
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/45
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/46
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/47
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/48
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/49
  switchport mode access
  !
  interface gigabitethernet1/1/50
  switchport mode access
  !
  interface gigabitethernet1/1/51
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet1/1/52
  switchport mode access
  switchport access vlan 9
  !
  interface gigabitethernet2/1/1
  switchport mode access
  !
  interface gigabitethernet2/1/2
  switchport mode access
  switchport access vlan 13
  !
  interface gigabitethernet2/1/3
  switchport mode access
  switchport access vlan 13
  !
  interface gigabitethernet2/1/4
  switchport mode access
  switchport access vlan 13
  !
  interface gigabitethernet2/1/5
  switchport mode access
  switchport access vlan 13
  !
  interface gigabitethernet2/1/6
  switchport mode access
  switchport access vlan 13
  !
  interface gigabitethernet2/1/7
  switchport mode access
  switchport access vlan 13
  !
  interface gigabitethernet2/1/8
  switchport mode access
  !
  interface gigabitethernet2/1/9
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/10
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/11
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/12
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/13
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/14
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/15
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/16
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/17
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/18
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/19
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/20
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/21
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/22
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/23
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/24
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/25
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/26
  switchport mode access
  switchport access vlan 41
  !
  interface/gigabitethernet2/1/27
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/28
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/29
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/30
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/31
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/32
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/33
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/34
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/35
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/36
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/37
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/38
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/39
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/40
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/41
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/42
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/43
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/44
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/45
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/46
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/47
  switchport mode access
  switchport access vlan 41
  !
  interface gigabitethernet2/1/48
  switchport mode access
  !
  interface gigabitethernet2/1/51
  switchport mode access
  !
  interface gigabitethernet2/1/52
  switchport mode access
  !
  output
  IP route 0.0.0.0/0 192.168.0.5 metrics 2
  encryption ip key-pair of keys rsa ssh-client
  .

  The VLAN intercommunicates is because you have an IP address on the interface VLAN that will dynamically build a route on the switch.

  As noted below, if you want to VLAN 9 to not see 13 or vice versa and ACL will be needed on the interface VLAN.

• Beneficiaries see each other when I send a group text

  When

  Yes. At the front desk. All names/phone numbers are titaled in the message group.