Networks duplicate on the computer.

Similar Questions

• What happens when "Still waiting for network when starting the computer and logon" is enabled and that the computer is not connected to the network?

  In MMC, I created the group policy and found through web search that computers with mapped network drives can connect better if "always wait for network when starting the computer and logon" is enabled...  So far, it has been very nice to have allowed.  Is no longer mapped network drives see the place as disconnected.  But what happens if the computer is not connected to a network?  Say the wireless router will turn off and your computer always 'wait... '. "turned on, should the user could still log the computer timely?

  Check these:
  Troubleshooting intermittent slow connection or slow start of http://blogs.technet.com/b/instan/archive/2008/04/17/troubleshooting-the-intermittent-slow-logon-or-slow-startup.aspx
  Priority and group policy processing
  http://TechNet.Microsoft.com/en-us/library/cc785665%28WS.10%29.aspx

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• Hidden from the readers of network duplicate without the letter assigned to the

  I have a computer at work that is connected to duplicate the mapped drives. We discovered a network path error trying to make links in Acrobat. The computer record showed all the correct network paths. When I used the command net 'use' in cmd it showed the mapped drives duplicate without assigned letters that did not appear in the GUI. Here is an example (leaving most of the names in car for security reasons). Both drives below are duplicates of the P: drive. I deleted these duplicates in the cmd window, but it happened again and we cannot understand it. Can someone tell me why?

  Status Local remote network

  -------------------------------------------------------------------------------
  P: OK \\p GING Microsoft Windows network
  A: OK \\p Microsoft Windows network
  S: OK \\P Microsoft Windows network
  W: OK \\c Microsoft Windows network
  Y: OK \\p Microsoft Windows network
  Microsoft Windows for the \\p OK GING network
  Microsoft Windows for the \\p OK GING network
  The command completed successfully.

  Thank you

  Kevin

  Hello Kevin,

  Welcome to the Microsoft Community Forum.

  The question you posted would be better suited to the TechNet community.

  Please visit the link below to find a community that will support what ask you:

  Microsoft TechNet

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

  Thank you

• I play with my lap top and accidentally decliques the network to which the computer used, now when I login it doesn't recognize me, I can't even on the desktop to fix

  Microsoft windows xp professional

  Ctrl alt del to access

  and then type the password

  doesn't recognize me any more that I décliqués the wrong box to change the settings of the home network

  Hello
  
  1. is your computer connected to a domain?
  
  If your computer is connected to a domain environment I would ask you to contact the administrator of the computer.
  Your journal Id and password is checked on the network, since you are not able to connect to the network it is why you are unable to connect.
   
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Automated connection of the network card in the computer asked after that prompted Boote

  Hi Al,.

  I'm under VMWare ESXi 4 Update 1. I use a pair of firewalls Astaro Security Gateway Computers invited in HA mode on my ESXi 4. My problem is that when the two guest computers are running in HA mode, they are fine. However, when I restart one of them with its virtual NICs defined on 'Connect to the market', it is not 'sync' upward with another. Two firewalls Astaro Security Gateway have a separate NETWORK connected between them for the SYNCHRONIZATION of HA.

  However, when I uncheck the 'Connect to light' and allow the guest to start computer and then 'connect' virtual network cards, they work fine.

  Is it possible to automate the connection of the network of machines comments adapter after, say, x seconds once they are turned on?

  You can connect the network card in 60 seconds after the start of your virtual machine with the following script PowerCLI:

  # Get the VM
  $VM = Get-VM YourVMname
  
  # Get the network adapter
  $VMNetworkAdapter = $VM | Get-NetworkAdapter
  
  # Disable "Connected" and "Connect at power on" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -StartConnected:$False -Connected:$False -Confirm:$False
  
  # Start the VM
  Start-VM -VM $VM
  
  # Wait for 60 seconds
  Start-Sleep -Seconds 60
  
  # Enable "Connected" on the network adapter
  $VMNetworkAdapter | `
    Set-NetworkAdapter -Connected:$True -Confirm:$False
  

  Robert

• remove all duplicates in the computer

  can help any one, I want to remove all duplicates of photos music files floders etcetcetc

  can help any one, I want to remove all duplicates of photos music files floders etcetcetc

  a lot of free progs on the web

  http://www.Google.co.UK/search?q=duplicate+file+Remover+freeware&RLS=com.Microsoft: en - gb:IE - SearchBox & ie = UTF-8 & oe = UTF-8 & sourceid = ie7 & rlz = 1I7GGLT_en & redir_esc = & ei = LXlITcmFDMew4QaIr7CYBQ

• Why is my losing communication from the computer with a printer networked to chance?

  I am the local admin here and I'm having a problem that I can't fix. I have a user with a XP machine whose default printer is a HP Color Laserjet 4700dn in a network. When the computer is turned on first in the morning, the user is able to print to the printer without any problems. During the day the at some point, the printer no longer to print applications of the computer. The applications are still what actually at the qeue but documents will print not unless the computer is restarted. I can't understand it for the life of me... Any ideas?

  Too bad
  I found the solution. A critical update of HP has solved the problem.

• When the computer 'host' is accessible by the 'guest' on the network computer, the host computer crashes hard.

  There is no error message, making it difficult to diagnose. There are two computers running Vista, fully patched, connected via a network of small size. (Microsoft MSE, no virus, start using activated, etc. "It is clean). When the computer goes to * any * file of the host computer, the host computer crashes immediately. There is no error message, freezing of mice, all hard disk activity stops, it stops absolutely everything. The continuous guest PC works well, it simply notes that the host computer is "not available". Someone saw something like that? I certainly have not. It's far too vague to diagnose.

  I looked on the event logs and couldn't find anything saying. I disabled and re-enabled the network shares, etc. Because they are built Lenovo desktop computers, I have a difficult time to do a "repair", but I guess I could give that a shot with some Vista discs. As I understand it, these computers are not often with Vista bootable discs.

  It is essential that I can diagnose it. In almost twenty years of THIS I've never seen anything this vague and almost impossible to diagnose.

  Any help or advice would be greatly appreciated. Is it all the same to make a "full reset" or "Refresh" of networking in Vista? Who could do.

  I also note that it is a recent issue, these systems worked very well for a while and it's a change suddenly. Particularly curious because I locked the Windows updates to update only when I say so... and I didn't have lately.

  Have you tried to replace the NETWORK card on the computer that crashes? If not, it's what I would do then. MS - MVP - Elephant Boy computers - don't panic!

• Error - the computer is running an operating system Microsoft Dynamics CRM does not support for the installation of the Extension of reporting Dynamics CRM 2011.

  Original title: Dynamics CRM 2011 Extension of reporting facility.

  Nice day

  Asked me to install this program called Extension Microsoft Dynamics CRM 2011 report Authoring on one of our PC network operations.  The computer is a Dell OptiPlex 960 under Windows XP SP3.  When attempting to install the program, you get the following error message:

  The computer is running an operating system Microsoft Dynamics CRM does not support.  To install this product, you need to upgrade your computer to an operating system supported.  For a complete list of supported operating systems, see the documentation for Microsoft Dynamics CRM (http://go.microsoft.com/fwlink/?LinkID=181018)
  For additional detals see logfile C:\Documents and Settings\bcodom\Application Data\Microsoft\MSCRM\Logs\BIDSExtensionsSetup.log

  Now, normally, I just coordinates with the end-user to him upgrade to Windows 7, however, after watching on the download page of this application (http://www.microsoft.com/download/en/details.aspx?id=13818), I noticed that Windows XP is one of the supported operating systems that can be installed on.  In addition, after looking around on the Technet documentation, I was not given a definitive answer on whether or not this application is not supported on Windows XP.

  So, my question is creation of Microsoft Dynamics CRM 2011 report Extension works on Windows XP SP3, or do we let us upgrade this computer to Windows 7?  Thank you!

  Hi Bcodom,

  In dealing with the problem to install the Extension of Microsoft Dynamics CRM 2011 report creation, I would recommend you to post your question in the help link.

  http://social.Microsoft.com/forums/en/CRM/threads

  Hope the helps of information.

• Router is not connecting to the computer

  I just replaced a bad on my computer's ethernet jack.  Now when I plug the router in there I don't get everything internet.  The router has internet and my laptop wireless connects fine via the wireless signal...  I replaced the power cord from the router to the computer with a brand new, only one I know works.  Still no internet.  When I look at the network settings, the computer says that it is connected to the router.  But no internet signal.  I also plugged the network directly into the computer and it works fine.  The ethernet jack is working.  Any suggestions?  I don't have the book and cd for the router...

  Mike

  Perform the following steps:

  # Open the browser and in the address bar type 192.168.1.1 which will open the router configuration page.

  # Bring back the MTU (Maximum Transmission Unit) of 1500 to 1400 or less (usually found on the main page / basic configuration of your router).

  # Click on wireless tab select width of the channel to 20 MHz only and channel 6, 9 and 11.

  Settings wireless #Adjust the following:

  ~ ~ Reduced from 100 to 75 beacon interval

  ~ ~ Lower the threshold of fragmentation of 2346 to 2306

  ~ ~ Lower 2347 to 2304 RTS threshold

  Then check the wireless...

• I don't know if I'm connected to a network. How would this knowledge? I've never read "Learning the Computer for Dummies"!

  How will I know if I'm connected to a network?  IP address conflict arises and I don't know what to do.  I forgot to get the book "Learning the Computer for Dummies", which I should have got that I'm completely computer illiterate!  Please, someone help!

  You can have an ip address conflict if you are connected to the internet through a wired or wireless router that allows two or more computers or other devices in your home to connect to the internet at the same time usually by means of a cable or dsl internet provider.  You can have this conflict, even if the computers in your House did not implement a network to share files and printers between them.  You can go to control panel > network and sharing Center to view network information.

  A common situation that can lead to a conflict of ip address, it's only 2 (or more) computers or other devices are connected to the router (via ethernet or wireless), and both have ip addresses assigned by the router automatically, one of the computers, then past in mode 'sleep', and while we sleep the router restarts.  When the router comes back online he doesn't know the computer sleeps is here and that he already has an assigned ip address and so it gives the ip address of the other computer.  When the computer asleep wakes duplicate error will be triggered.  It can be solved by turning off computers and turn it back on so that the router will assign them new ip addresses.  If this is not what is happening in your situation, the following may help: http://windows.microsoft.com/en-US/windows7/Get-help-with-There-is-an-IP-address-conflict-message

• That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  That means "another device on the network use the IP address of your computer"?, that means "another device on the network is using the IP address of your computer?

  A

  Most likely, the computer becomes a network address of a router. The assignment of an address ("lease") expires and must be renewed after a certain period of time, which could be an hour or a day. The lease expired without being renewed because the device has been disconnected at the time. Meanwhile, the address has been leased to another device on the network, or maybe the router has not updated its list of addresses the leases. When the device offline comes back online, a conflict results. Depending on the type of router you have, the conflict can resolve itself automatically. If not, then in the menu bar, select please

  ▹ System Preferences network ▹ 

  If the preferences window is locked, click the lock icon in the lower left corner and enter your password to unlock it. Click the Advanced button, and then select the TCP/IP tab in the sheet that drops down. Look at the menu option

  Configure IPv4

  If the selection in this menu is

  Using DHCP

  Click on the button

  Renew the DHCP lease

  Test.

  Make sure that you have more than one DHCP server on the network. That could happen if you have more than one access point Wi - Fi, or if you have a router and broadband a wide device distinct in connection mode sharing.

  B

  Less likely, you have a network address that you assigned yourself and another device is itself by assigning the same address. In this case, the selection to configure IPv4 menu will be either manually or using DHCP with manual address. This kind of conflict will not be resolved automatically. You have the following options to solve:

  1. Change the selection in menu using DHCP.
  2. Change the address assigned manually to one that is not used by another device.
  3. Change the address of the other device.

  Which of these options you choose depends on the details of why you use a static IP address. Any changes you make to the network settings is necessary before taking effect. To do this, click OK, and then click apply.

  If the router is also your device at wide band, then he may be operating in bridged mode. In this case, only one customer at a time will be able to connect to the Internet. Consult the manufacturer or ISP documentation for how to reconfigure the device in the connection mode sharing.

  C

  According to a report a "DirectTV" receiver can cause the problem. If necessary, disconnect the device from the network, or power off and test. Consult the support services provider.

• How to extend the network and using the Ethernet port to connect an older computer without wifi capability

  I have a wireless network with my Time Capsule, but also I have an old computer without wifi capability. Is it possible to share the connection to this computer that connects an airport express (model A1264) to extend it and the computer thought that the ethernet port on the Airport express?

  Thank you.

  Yes

• Use the TC for backups only, while the computer is connected to a different network

  Time Capsule version 7.7.3

  I want to be able to make backups without having to connect to its network via wi - fi, because I'm connected to a different wireless network to access the internet.

  I thought that I need to connect the TC to my computer with an Ethernet cable.

  But how to set it?

  Like this.

  Time Capsule using wired for Mac for backup only.