Why computer rejects blank disc?

Whenever I have inserted a blank disc that the computer says that it is not empty and rejects him.

You could try to clean the disc with a few kit or alternatively, get a new drive.

Tags: Windows

Similar Questions

  • Why my Media Player does not detect a blank disc?

    Why my media player 11 won't detect blank disc and I want to burn CDs

    C00D1176: Cannot find a CD burner

    Windows Media Player cannot burn (copy) the files because it cannot find a CD burner (recorder), or Windows can not recognize it. Check the connection between your computer and the burner. If the burner is connected properly, use the Add Hardware Wizard in Control Panel to install the appropriate driver file, and then try burning the files again.

    Ignore the title and scroll down to the C00D1176 error
    http://www.Microsoft.com/windows/windowsmedia/player/10/errors.aspx

    You must download and install the updated firmware for your CD/DVD

  • Prepare this blank disc errors

    I have prepared CDs and DVDs using several of my computers with Vista business and have been able to read without problem.  However, recently, I've been putting a disc in the drive and it will not read the information on the disc and gives me the burn a disc window, that says prepare this blank disc.  However, I know that there is something on the drive because if I restart the computer, it will then read the disc.  I am also using the same computer that the CD was generated with.  If it wasn't a CD I has used 50 times in the past, I think it's a bad CD but that is not the case.

    I use my computers mainly for Powerpoint presentations and I use Office 2007.  I am also on a military installation (Maxwell AFB) and think I might have a driver problem, but do not believe the people of the computer of the AF which is the case and you just want to reformat and recreate the image as my hard drive which means I have to start over.
    In fact, the same CD was taken at their office (the computer guy) and that they could not read either - but we could see where it had data on the CD.
    Anyone able to explain why this happens?  I think it is a driver problem but it indicates that the drive works properly.
    People of computer here on Maxwell is a clue as to what the problem is either.

    Hi ChiefHumble,

    You can run the FIX HE mentioned in the following link and see if it helps.

    Your CD or DVD drive cannot read or write media

    Hope this information is useful.

  • Why the rejection of multiple photos doesn't work anymore when you change pictures?

    Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

    Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

    Have you tested, if the problem occurs only in an Aperture library or libraries opening?

    Create a new Aperture library to test and see rejection, so it works.

    If it does not work in a new library either, I got trash Aperture preferences.

    In preferences file is now in the container folder in the user's library.

    Try this:

    • Leave the opening runs.
    • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
    • and the ~/Library/Preferences/com.apple.Aperture.plist file

    Your user library can still be hidden. To reveal the hidden user library:

    • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
    • Select your folder user/home (with the House icon in the side bar of the Finder)
    • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
    • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
    • Open your folder, then the library folder, then the containers.
    • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
    • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

    Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  • When burning a cd im says insert blank disc though even there in. a nero 7 on windows xp

    When burning a cd im says insert blank disc, though even there a to help me im using nero 7 on windows xp

    original title: cd burner

    Hi billyphillpotts,

    ·         Did you do changes on the computer before the show?

    ·         You are using windows XP or the windows operating system 7?

    If you are using windows XP, follow these methods.

    Method 1: Follow the steps in the article.

    How to troubleshoot problems that occur when you copy data on a CD - R or CD - RW optical disc in Windows XP

    http://support.Microsoft.com/kb/324129

    Method 2: Uninstall and reinstall Nero.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    If you use windows 7, follow the steps provided by Sébastien M dated October 10, 2011.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/burn-a-CD-i-keep-getting-insert-blank-disc-it/f8a034da-6146-4ceb-b795-2f26f0855886

    For reference:

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  • Media Player does not burn the CD, it says 'clean the disc or use of other brand of blank disc '.

    Why media player usually burn the audio CD? It says need to 'clean the disc or use another brand of blank disc' - what l'H@&& is that?

    Hi me,

    -You receive this error message while you try to burn a CD/DVD? Or is it specific to any particular CD/DVD?

    Follow the steps listed in the article given below to resolve this issue:

    Windows Media Player Error Message help

  • error message please insert a blank disc into CD Drive (E :). when burning using WMP 11 in XP

    Original title: error message

    Please help someone

    OK, I tried everthing, I use windows xp

    Last week I updated my windows media player and now I have WMP 11 (sucks). Before I did the new update I could burn c.ds very well. But now I get an error message saying: Please insert a blank disc into CD Drive (E :). Once WMP detects a new disc, it will start automatically hot. I tried so many new CD I stop purchase. So I wait a minute until I see it have detected a blank cd (on the left it shows blank disc then try again, but I can't burn data or audio discs.) I try a few things about fixing the problem as uninstall WMP 11 but it is still on my computer - could someone help me.

    Thanks for the reply

    But who doesn't have everything he has told me that I didn't have a cd/dvd was not able when just before I installed the update WMP 11 he burned cds very well helped. Is there a way I can reinstall my old version?

    ===============================
    The following freeware can be worth a try:

    CDBurnerXP
    http://www.CDBurnerXP.se/
    (works on XP / Vista / 7)

    Download CDBurnerXP
    http://CDBurnerXP.se/download.php

    CDBurnerXP to make Audio disc
    http://CDBurnerXP.se/help/audio/compileaudio

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Try to burn a CD. The system will not recognize the blank disc or let me burn__

    Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted

    Hello

    Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.

    If no joy:

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • Get my DVD player to recognize a blank disc

    I tried several brands of dvd media blank, I uninstall-ed then reinstalled different software.it reads disks with info about this it won't read a blank disc! What to do next? Help

    Hello

    • If there's an error message displayed when blank DVD is inserted?

    Try to remove the upper and lower filters and check if the problem persists. To do this, follow these steps:

    Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: (http://windows.microsoft.com/en-US/windows-vista/Back-up-the-registry ) how to back up and restore the registry in Windows)

    i. Click Start, type regedit in the search box and then click regedit in the list programs. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.

    II. looking out for and then click the following registry subkey:

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Warning: There may be many instances of the registry subkey that is mentioned in step 2. You must ensure that you are in the appropriate registry subkey before modifying the UpperFilters and LowerFilters values. To verify that you are in the appropriate registry subkey, make sure that the default data value is the CD-ROM/DVD-ROM and the class data value is CDROM.

    III. in the right pane, click UpperFilters, and then click on remove.

    IV. click Yes to confirm the deletion of the UpperFilters registry entry.

    v. in the right pane, click LowerFilters, and then click on remove.

    VI. click Yes to confirm the deletion of the LowerFilters registry entry.

    VII. exit Registry Editor, and then restart the computer.

    Note:  After the removal of the UpperFilters registry entry and the LowerFilters registry entry, you may lose functionality in certain programs such as CD recording programs. In this scenario, you must reinstall all of the programs involved. If the problem persists, contact the program vendor to determine if an update is available for the program.

    Also, check out the following links:

    Diana
    Microsoft Answers Support Engineer

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • It is not possible to burn music on a blank disc to my Media Player library.

    Help, please. RIP ALL my CD s, to the computer as a backup incase I scratch or ruin CD and also for listening to music on my computer when he is away from camping etc.

    Now, I'm for some reason unable to burn my CD to a disc to use in my car, etc..  I use correct audio blank discs and burning will start but after a track, or so, all of a sudden he finalizes the disc and continues to burn!  I went well so maybe blank discs trying to get out.  Thanks for all the ideas here. I appreciate it.

    I use a computer toshiba laptop. Windows Vista business and keep my computer up-to-date.

    Ideas:

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    I thank very you much for your response and links.  YES, I did as you suggested and it was a positive result. I am very happy.  THANKS again for your support and advice and I hope that you have a Christmas happy and safe and all "out there". 5 medal note permanently.

  • When I insert a blank CD the message is "insert a blank disc" he does not recognize the empty space and says zero bytes free.

    I have a new desktop computer Dell 9010.  The CD/DVD drive is 16 x DVD-ROM SATA.  When I insert a CD with files it contains with free space, it says that I need more free space.  It does not recognize free space.   (free 0 bytes)

    When I insert a blank disc the message is "Please insert a new disc.  The drive doesn't recognize free space on a disk.  It's the same thing with discs CD - R and CD - RW (52 X and 12 X respectively).

    I have a new desktop computer Dell 9010.  The CD/DVD drive is 16 x DVD-ROM SATA.  When I insert a CD with files it contains with free space, it says that I need more free space.  It does not recognize free space.   (free 0 bytes)

    When I insert a blank disc the message is "Please insert a new disc.  The drive doesn't recognize free space on a disk.  It's the same thing with discs CD - R and CD - RW (52 X and 12 X respectively).

    ====================================
    The following items may be worth a visit:
     
    Your CD or DVD drive cannot read or write media
    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

    (982116) your CD or DVD drive is missing
    or is not recognized by Windows or other programs
    http://support.Microsoft.com/kb/982116
    (Windows XP / Windows Vista / Windows 7)

    (scroll down and expand the section: "Let me fix it myself")

  • CAN´t burn on a DVD. Process went up to 98% and then rejected the disc. The message is "run time error: unknown exception."

    Can´t burn on a DVD. Process went up to 98% and then rejected the disc. Is the message "run time error: unknown exception. . Cannot burn to a folder either. Process finishes, but the folder is empty. The pc has 474 GB of space. The 61-minute video has some photos 1000 x 750 pixels in size; files (.m2ts and .mp4). using DVD - R. What can I do?

    Rayo

    Thanks for the reply.

    Have been able to translate what I wrote in the numbered validation 1? There's a translate button in the bottom right of each message. Just don't combine English and Spanish in the post. Must there not having that one language in the post of the button translate work. Do not know why. But that's the way it seems to be.

    Given that you can't burn your Timeline on disk or on the record, it seems that the problem is probably in the timeline content somewhere.

    Please reread what I wrote in post numbered 1 to explore the contents of the timeline. If you did that? I will write more on that the next

    If necessary.

    If you have problems in communication, please let me know. I'll re - write my suggestions if necessary.

    Thank you.

    RTA

  • Satellite Pro A60 does not recognize DVD-R blank disc

    Can anyone help?

    I've tried several brands of DVD - R, but also blank discs DVD + R on my Satellite Pro A60, but very few of them are even recognized.

    Pioneer DV - RW DVR - K13A is supposed to work correctly when I check the Properties tab.

    I tried to watch upodates but frmwre - na .zip was not allowed to work, the D drive was not considered appropriate...

    Help, please!

    Thank you

    Hello

    What exactly do you mean? Is the drive does not support content or there is problem if you want to burn data on DVD-R media?

    Can you please explain this a little more carefully?

    Just FYI: I use the empty media TDK almost 5 years and I can say that TDK is very good for this kind of things.

  • Microsoft Media player error message tells me to insert a blank disc

    original title: Microsoft Media player error message

    I tried to burn music from my playlist on the media player on a blank CD and it tells me to insert a blank disc after that I already have, and then says that the program will start once it recognizes the blank test. How can I get it to work.

    Hello

    Thanks for asking!

    1. who is the operating system installed on your system?

    2. did you of recent changes to the system before the show?

    3. do you get an error message when you try to burn the disc?

    Method:

    Follow the indicated link and follow the steps. Check if it helps.

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Burn a CD or DVD in Windows Media Player: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

    Answer with the results, I would be happy to help you further.

  • I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hardsrive must be clean first. The disc does not start on the existing XP. How can I do this?

    I want to install WIN 7 on my Dell XP computer. The disc I bought says that the hard disk must be clean first. The disc does not start on the existing XP. How can I do this?

    Hello

    Have you changed the boot order?

    You need to change the Boot order to make the DVD/CD drive 1st in the boot order and boot from the Windows 7 DVD:

    How to change the Boot order in BIOS:

    http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

    Do install a cleaning, removal of the existing XP partition and create a new partition to install 7 on in the own installation process:

    http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

    See you soon.

Maybe you are looking for