Never share and data entry in a Web of planning form.

Similar Questions

• Why the data form may not text and Date entry?

  All,
  
  I want text and Date entry in Web forms, so I put the account * 'Data Type' * 'Text' property, but I can still not enter any text in the cells of the form online.
  
  everyone knows what the problem is? or must set up other?
  
  Thank you very much
  Xuesong

  Hello!

  Perhaps you need to define evaluation order:

  Administration - dimensions---> evaluation--> tab order select the Type of Plan and accounts first set...

  Kind regards

  user637777

• the scale of data acquisition and data entry error

  I have a USB 6211 camera set to MAX for 11 different channels: the first 10 channels are configured with a scale factor of 2 while the last channel is configured with a scale of 1.  I connected battery 9 V for the first two channels, ai0 & ai1, (level 2) and the last channel, AL10, (1 scale). The input pins were 15, 17 and 20 for input voltage with pin 28 connected as a reason. Then, I checked the feature in MAX.  Surprise! I expected to see 18 volts for the first two channels and 9 volts for the last channel, but much to my surprise I got all channels showing data about 10.86 volts and the last channel showing a value of 7.79 volts!  How is it that I see the values for channels not connected! In addition, why are values of cable channels so screwed up! With a 9 V battery and a scale of 2, I expect to see 18 volts, not of 10.86, and where the 7.79 volts for the channel which has a scale of 1!  If I run MAX continuous mode instead of the sample N mode I get a few other strange results: I get a single horizontal line and 1 sinewave!  It's amazing because I have a 9 volt battery connected to the unit! I don't even how arrays of the VI that uses these signals is like since they are all screwed.  Will you please advise me on this one because I'm completely stumped.

  
  

• Historical research Google clears never when I clear the history browser and data

  I have a question that I barely noticed what is happening, it has never been a problem before. If I wanted to erase all of my internet history, (including searches on google), then all I do is go to settings, safari, clear history and data from the Web site, and it would be gone. Or even if I went to the history section on the safari browser whilse and clear of all time, he would go.

  However when I do it now, it still shows google searches!

  It is very annoying because I have to manually clear google searches, that clears only 3 search at a time.

  This AP is an ios issue, because it's never happened before.

  Your Google search history is stored on Google's servers. You should be able to erase by going to www.google.com (this on a computer), login and go to your search history. Access your account, your personal information, the search parameters. Down at the bottom of the page, you will see a "search story" a hyperlink. You can click on that and change your story here.

• I have Firfox 18.0.1. On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

  On a single Web site my usercode and password entries are considered not valid. The same words and password work fine in IE and Google.

  I found that my Norton Toolbar had been disabled so I enabled it. When I tried the site it worked. Go figure.

• The use of pins of status (4 outputs) and data (8 entries) of the parallel port pins at the same time.

  Hi all

  I'm a newbee in labview. As part of my project work, I need to get 8 digital inputs and send 4 digital outputs.so I think to use the Parallel Port on the pc.i can make use of 8 datalines for entries. I found the site NOR is it possible to use status for output pins. But is it possible to use status for output pins pins and data for entries to the time.please help even me also mention of the measures to take, or keep in mind while implementing.also include any example vi that could be useful.

  Thanks in advance

  I would recommed you to NOT use the parallel port. Now a day you have hardly a PC with parallel port. also if you have some old PC then most likely last version of LabVIEW (e.g. 2010) will need a lot more memory RAM and processor.

  If you want a solution very very low cost then I would recommend using an arduino to that effect. You can then download LabVIEW Interface for Arduino and start working.

  If you continue to use the parallel port, then you could try (I haven't worked with parallel port and have not tested the following solutions)

  Download VIPM and then install the enclosed package. It will add the port e/s palette in your labview. and you can use it.

• Internet diagnosis Uverse runs whenever online for the 3 first sites until I run their diagnosis, and then traverse the requested Web site. The diagnosis can never find anything.

  original title: At & t uverse internet
  Use internet AT & T Uverse, their diagnosis happens every time I go online for the first 3 sites until I run their diagnosis, and then traverse the requested Web site.  The diagnosis can never find anything.  Works great after that.  Is something my tracking sites and interrupt my process?

  Hi Chelsea,

  ·              When you get the run diagnostics?

  ·              Do you get this message in the browser or is it a popup on the computer?

  It would probably be best for you to contact uverse support to see why this is happening.

• How can I take one allows so-called data entry I ask is how much you have and back up this data in some way, and then the system will offer you different options

  How can I take one allows so-called data entry I ask is how much you have and back up this data in some way, and then the system will offer you different options

  Not with ordinary Muse. These things requires a dynamic backend with a connection database and in your case quite likely some substantial customization and programming.

  Mylenium

• Problem of sorting of web form and data record

  Hi everyone, I found something very strange when I using sorting in the web form. Here is the example:
  
  column: Jan, Feb. line: a1: a6
  
  1. I put number 1 to 6 in the column of Jan from A1 to A6
  2. I sort descending Jan column, now in the Jan column order shows from 6 to 1
  3. I put number 6 in [Feb columns and lines of the A6] (with the sorting of the results of the A6 is the first line) and saved, and the number 6 I entered now appears in the line A1! (column Feb)
  
  Could someone tell me how to capture and record data in the correct sort order? I mean what you entered Is What You Get

  Its a Bug 12901681: PLANNING FORMS DO NOT UPDATE THE CORRECT in the SORT CELL
  It is supposed to be fixed in 11.1.2.1.103.

  Duplicate of which:
  Bug 12676064: PLANNING FORMS DO NOT UPDATE THE CORRECT in the SORT CELL

  Or as a workaround if you want to hide sort option you can apply under patch:
  Oracle Hyperion Planning, Fusion Edition Release Patch Set Exception (PSE) 11.1.2.1.000: 13014294, please take note: this is a small patch of development and requires a password to access. It takes a different password for each platform. Raise a SR with Oracle and are looking for the same thing.

  Or its fixed in 11.1.2.2 as 12901689 - forms do no update the correct cells if the sorting option is selected.
  Read me:
  http://docs.Oracle.com/CD/E17236_01/EPM.1112/hp_1112200_readme.PDF

  See you soon...!
  Rahul S.

• GUI data entry screen

  Is there any GUI screen to create data entry forms? Something similar to CF Report Builder would be great. Where you can add fields from the tables directly to the screen in Design view, and then save the screen as a CF file for use on a web site.

  Please forgive if this is a stupid question, I'm new to CF thanks!

  Yes, certainly familiar with the BFC, but it is not a tool of 'design': it is a coding tool. therefore does not have the Visual side of things.  That is why I recommended DW for what your needs are.

  According to works your shop, there is (at least) two different niches to fill: people like me who come to write the code, and while I do a mark-up, it is not my work in the style, if I don't need a Visual display, I just need to type the code in.  So I use CFB (or CFE if you want to save you a few £££).  We have other guys that make CSS and the rest of the square increase dollying, and they use DreamWeaver because it handles both the Visual side of things, but also understand the code CF who is there also.

  We also have generators that make the real... uh... Well well... the design and they use Adobe Illustrator or something like that.  I do not know... I never work with them. UI developers are taking what they produce and which cut.  I think it's .ai files our UI guy receive by talented designers well.

  In any way, if you make time code and mark up/CSS with Visual effects, you want DW rather than CFB I think.  There are also a few Eclipse plug-in called "Aptana" I've heard people banging on everything... I think it's something to do with the side of the mark-up of things (well, OK, I know it's something to do with that side of things, but I've never used, so don't know much except that it exists).  Don't know if it is "Visual" or not... I never got to know.  Maybe look into it well.

  Sorry if I seem dismissive of the touchy-feely side of things: I am one of these dinosaurs of the web--if it was up to me - everything would be in 11pt verdana and we would use tables for layout.  With border = 1 for "make believe a little smart".  One of my colleagues as saying something about the so-called "client-side scripting" that people do these days: "Java Script" or something like that.  I don't see what was taking off: who uses Java anyway?  ;-)

  --

  Adam

• Lack of voice and data at the same time kills me

  After using a treo 750 (WM 6.1) on att for the past three years, I guess I did not realize the advantage of ATT and gsm in general.  There are many drawbacks... mainly pricing for simple accounts (However their family plan was directly comparable to those of sprint).  I constantly try to use data applications while talking on the phone without success.  I started thinking that I could do without, but a week later, I still really really miss.  My wife did too... because she's I usually give directions or any other web information while on the phone.  There is nothing like view google satellite map to help someone make sure they are in the right place... "see a big tree on your right with a large Brown building behind it, Yes, it's that one" does anyone else have this feeling?  WiFi is not an option for me most of the time.

  Voice and data at the same time is not available when using any CDMA network due to network constraints. This is true for all types of phones, not only Palm or not only the Pre. Your example of electronic control or by using google maps, the gps data that can be stored before you activate the call. try to browse the web while making a call and try to go to a web page, you have never visited before, so that you know, that he cannot be a version collected page.

• Data for the Eloqua Web search is secure

  I recently put up a newspaper in the system using a form and functionality of Web of Eloqua database search.

  From the point of view of users, it worked perfectly by only to redirect users to a page/hypersite if they correspond to their user name (email address) with a password (sent to them by DM).

  My question is, how secure is the Web database search for similar implementation and are there underlying technical problems I should be aware of?

  While the platform Eloqua itself is secure (including data search), its course in the fact that someone cannot access your data without authorization. However, because all data is stored in plain text in Eloqua, we absolutely do not recommend using it for something as password storage. Depending on where your company is located you can actually break the law by storing the password in plain text data. Therefore, while your data is safe, your password storage space is not, and anyone who has access to your instance Eloqua also has access to these thousands of usernames and passwords, many quite possibly shared with other sites outside your own.

  Bottom line, you should never store any data that must be encrypted in Eloqua, because we don't offer any type of data outside of text unencrypted storage.

• communication error with the server. callback failed for the data entry page

  Hello
  
  We have recently applied the corrective update EMP on EMP 11.1.2.0 111.2.1.
  We have following the architecture,
  
  database server: sql server 2005
  Server Foundation (OS = windows server 2008): HSS, EPMA, Manager Calc, EAS, EIS, provider's server, planning
  Essbase Server (OS = windows server 2008): essbase
  
  After you apply the patching EMP 11.1.2.1, we apply after Electrodes for IE 9 compactibility i.e EMP 11.1.2.1.600 patches
  
  1. patch 14119724 (Workspace)
  2 14142678 patch (Shared services)
  3 patch 14224664 (EPMA)
  4 patch 14464109 (planning)
  
  After you apply above patches, all users get error when opening planning web form through the workspace of all client computer.
  
  "* error communication with the server. callback failed for the data entry page. "
  
  
  
  
  When restore us only planning patch 14464109 , issue of "communication error with the server. callback failed for the data entry page "get resolved for all users, but failed for a single user IE"user xyz" "
  
  the user xyz have OS = windows 7 and IE 8
  user xyz can take foundation server RDP can open any form of planning successfully in vain get when doing the basic machine.
  
  I have following question:
  1. Why do we get error "error communicating with the server. callback failed for the data entry page"after you apply the fixes to IE9
  
  2. after cancellation all patches or planning one patch, why the user xyz always get the error but not other users
  
  
  Thanks in advance
  
  Published by: 922755 on June 7, 2013 16:08

  It might be useful to have a read of the following doc Oracle Support - "error:"error Communication with the server. " "Callback failed for the data entry page" when you open a Web form of planning with the members of the Type of text [ID 1392689.1].

  And then this question should be resolved en.600

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• Never share storage

  Hello
  Never share: does not allow for Essbase implicitly share this member. But what about its data storage, is it considered store or dynamic Calc.
  
  Thank you
  Foksh

  But what about its data storage, is it considered store or dynamic Calc.

  Never share makes no sense in the context of a dynamic calc - it's either dynamic Calc or store/Never Share / dynamic Calc and Store/Label only.

  Dynamically calculated members are not stored. Never share/store/dynamic Calc and store are stored. (Okay, dynamic Calc and store not stored until recovered for the first time, but then they are stored). Label is only a hot spot in the hierarchy - there is no data stored or retrieved for this member; He can Watch as it stores data that he will be in the image of the first child library below (or is that just the first child with data - don't remember on that one).

  Phew, more you have always wanted to know, but the key is never part is stored in. PAG file if there is data.

  Kind regards

  Cameron Lackpour