the scale of data acquisition and data entry error

Similar Questions

• the core data entry error - windows 8

  It seems to me to get the data entry error on my windows kernel 8 all the days. I ran chkdsk many times before, Defrag, reinstalled a clean copy and ran virus, malware scans.

  Kernel error of data entry displays the blue screen and restarts and is very well after the restart, but a few days later, the error will appear again. Please help on how I can fix this?
  I'm not sure as to what files I need to download. Please advice.

  ShinPark3

  They are usually related to a problem with HD.  Before running CHKDSK I would remove Avast and express cache (both are know-how BSOD)

  Avast can be a cause of BSOD.

  Please remove and use the Defender built-in at least to test

  http://files.avast.com/files/eng/aswclear5.exe

  A CHKDSK F: /R
  
  CHKDSK WARNING: while running chkdsk on the drive if bad sectors are found when chkdsk attempts to repair this sector all the data available in this area may be lost.

  Run CHKDSK/r/f of a high (run as administrator) command prompt.
  Do this for each hard drive on your system.
  When he tells you, he cannot do at the moment – and ask you if you do not want to do it at the next reset - answer Y (for Yes) and press ENTER.

  Then restart and let the test to run.
  It may take some time for him to run, but keep an occasional eye on it to see if it generates errors.
  http://www.howtogeek.com/HOWTO/Windows-Vista/Guide-to-using-check-disk-in-Windows-Vista/

  See "CHKDSK LogFile' below to verify the test results.

  B Elevated Command Prompt:
  Click on start and type "cmd.exe" (without the quotes)
  At the top of the search box, right-click on Cmd.exe and select "Run as Administrator"
  

  C CHKDSK LogFile:
  Click Start and type "eventvwr.msc" (without the quotes) and press enter
  Expand the topic the Windows logs, and then select the Application log file entry.
  Double-click the Source column heading.
  Scroll down the list until you find the entrance to Chkdsk (wininit for Win7) (winlogon for XP).
  Copy / paste the results in your next post.

• Move the cursor to data entry in the first element of array

  It seems that it should be simple, and that I still can't find a way to do this.

  I want to have a dialogue VI with a single Berry. When loading of the dialog, I want the data entry cursor to appear in the first element of the array, so the user can begin to enter data with the keyboard and I can't click on it with the mouse and then tab on the rest of the table. The property node 'Key Focus' just seems to give me a box around the entire table without any cursor active data entry.

  A table control has a property called array element. Get a reference to it and its main objective set to true. I just spent a few minutes test this and it didn't work for me if I first got the reference, then turn the key a second property node, rather than doing everything in one implicit property node. In addition, it still affects the update to the second element of the array, which is certainly not too useful. I have not found a way around that in my brief tests, unfortunately.

• Left click will get the cursor in the field of data entry

  When I left click in a data entry field will not come the cursor upwards and I can't enter data. The left click works normally at any other time. I use a Dell Latitude D830 laptop. Everything works normally until today

  Hello

  • Where does this happen?
  • What were the changes made before the show?

  You can collect screenshots of color 256 and transfer it to the http://skydrive.live.com/ using your Live ID and I'll check it:

  Screenshot

  ========

  1. press the button print screen (print screen) on your keyboard.

  2. click on the "Start" menu, type "mspaint" in the search bar and press ENTER.

  3. in the Paint program, click on the "Edit" menu, click on 'Paste', click on the 'File' menu and click 'save '.

  4. the dialog box "Save as" appears. Type a file name in the "filename:" box, for example: "screenshot".

  5. make sure that "JPEG (*.)" JPG; *. JPEG; *. JPE; *. JFIF)"is selected in the box 'Save as type', click Desktop in the left pane, and then click"Save ".

  ===========================================================

• A question about the CREATE DATABASE LINK PUBLIC and ORA-12154 error

  Hi all
  
  
  I have a problem on the public database link creation and I would be grateful if you could kindly give me a helping hand. I have the following connection settings in my
  tnsnames.ora file:
  

  ...
  DGPAPROD.WORLD = 
       (DESCRIPTION = 
         (ADDRESS_LIST = 
          (ADDRESS = (COMMUNITY=tcp.world)
            (PROTOCOL=TCP)(HOST=ORASR001)(PORT=1521)
           ) 
         )
         (CONNECT_DATA = (SID = DGPAPROD))
      )
  ...

  Having the above mentioned parameters, I can connect to this remote database directly in a SQL * more shell:

  $ sqlplus username/[email protected]

  It works pretty well and the connection is established without any problem.
  
  Now, what I want to do is to create a public database of this remote database link to avoid the user/connection of switch for the visualization of the
  the content of this database. I proceeded in line with the syntax indicated in the Oracle online documentation:
  
  http://download.Oracle.com/docs/CD/B28359_01/server.111/b28286/statements_5005.htm#SQLRF01205
  
  This is why I run the following to create a public database link

  CREATE PUBLIC DATABASE LINK SR001_dblink CONNECT TO user IDENTIFIED BY password USING 'DGPAPROD.WORLD';

  Apparently there is no error and the link is created successfully. However, it cannot resolve the remote host and every time I run this query
  (myenterprise is the name of a table in the remote database)

  SELECT *
  FROM myenterprise@SR001_dblink
  
  ERROR at line 1:
  ORA-12154: TNS:could not resolve the connect identifier specified

  What causes this problem?
  
  Thanks in advance,
  
  
  Kind regards
  Dariyoosh

  You must have defined DGPAPROD. WORLD in tnsnames.oar on the server where DB is runnig.

• Addition of HTML in the field of data entry of Client Application

  4.2 my users was previously able to enter standard html controls in a field that is displayed in a single application read for other users.

  Title: < b > Welcome > < /b > enterd by user in the form and recorded in the database.  Then another application pulls from the database to display information only.

  4.2 welcome not appear "BOLD", but with the html tags before and after the welcome.

  Joined the 4.2

  

  4.2 displayed

  

  Entered in 4.1

  

  Posted in 4.1

  

  This user has used this application for many years and a lot of html embedded in its text.  I am hoping that there is a quick fix here.  Any help would be appreciated.

  Thank you.

  Joyce

  Change the report columns display "Display (escape special characters) text" Type to "Standard report column.

  You can do it, but you must be aware of the security implications that opens upwards (i.e. XSS attacks).

• Is there a way to change the scale of each clip and the title in the timeline?  I shot in 4 k, but I forgot to put my 1080 sequence so now I have to change each element individually and reduce by 50%.  Help!

  Is there a way to scale both the entire timeline?

  Make a clip. Make a right click on the clip, copy, select all others and paste attributes.

• When you turn my computer to get on the desktop windows stops before and an application error pops up that is described below.

  Lsass.exe - application error

  x application failed if initialize properly (0xc00000005) click on OK to close the application
  the OK button is less

  I tried many ways to restart the F8 advise such items that start windows normally, know last good configuration, safe mode and nothing works.  It happened for about 12 hours.  the computer works fine until what happens... not sure if a virus has infected my computer or not.  When you click OK will appear dark and the mouse works but nothing else is running or change.

  sbdci,
  If you are able to boot mode safe mode with command prompt or start from a XP CD to the recovery console and run the following commands.

  Chkdsk /r

  sfc/scannow

  Also if you go the Support technique Microsoft and search lsass.exe it will give a list of articles on the issue.  There are many elements that interact with this file, then you may want to look at the search results to see if any apply to your situation.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• my computer failed and I need to recharge the 13 elements, I crossed and downloaded but error message says unsupported c drive?

  I downloaded 13 items but can't make it work, error message: drive C does not?

  John

  you have a mac with case-sensitive drive?

• How to put a video Clip on the scale and avoid the deterioration of the Image?

  Hi, I'm trying to determine the best way to put across a number of videos in my sequence, so that I can ' digitally zoom "on the action and again, we hope to avoid degradation of the focus/sharpness of the image.

  My concern is that using the Scale-up effect, is to distort the images, that is stretching the pixels.

  (one of the clips that I tried to use the scale effect appears blurry and distorted, but it could have been a problem of automatic update, I'm not sure).

  Here are the details of my installation.

  I'm under PP CS5.5 on Windows 7, and I have a card Nvidia CUDA.

  I shot the video on a Canon Vixia HF/S21 in 1920 x 1080 p at 24 Mbps (Canon calls this MXP and the 'p' is not native, is "drop-down" menu inside the camera).

  My output will be h.264 for the web. I'm fine with the dimensions of the output at 1280 x 720. The output doesn't have to be 1920 x 1080, BUT it would be nice IF I could the 1920 x 1080 output while keeping the image sharp and vivid. If 1280 x 720 gives better results then I'll do it.

  So my questions are the following:

  (1) using the scale effect PPCS5.5 result in a distortion of the image

  -It causes the image to get blurry, less sharp/crisp?

  -(I'm scaling the clips of 50-70%)

  (2) is it interesting to define the parameters of the sequence at 1280 x 720 (instead of match clips at 1920 x 1080)?

  -My thought is to set the parameter sequence to these Dimensions of lower resolution and I can get a 50% scale upwards by simply * not * using 'Ladder to the chassis' on the clips I want 50% furred.

  If you shot 1080 and 720 is finished, allowing some flexibility to scale.  PR calculates scale in two ways, which is very confusing.  If you set your sequence on 720 and preferences to the default scale to the size of the image, all the clips in 1080 you will add later will show 100% in control of the effects > tab, movement, even if the Pr has put across your footage in 1080 at about 45% to frame 720.

  I suggest you uncheck default scale to the size of the image.  Then, when you add your 1080 videos to your 720 sequence, it will be scaling to 100% (for real) and it will be bigger than your raster 720.  Only by doing so you know if you climbed your film beyond 100% when you are panoramic and analysis later.

  Your first clip to meet the sequence, copy and use attributes to paste on the rest of your clips in 1080 to bring to the 720 frame scale to the bottom of the scale.  Then you can make adjustments from there.

  BTW, there is an article on the Adobe site how the CUDA scaling is greater than Ps and Ae scaling.  Maybe someone can find the link or you can search the site from her.

• Alert to be fired only for the first record, when there are duplicate entries

  Hello
  
  This is related to the fact of Oracle 10 g.
  I have a block record multi in which I entered and save some codes, something like below
  
  Code Description
  =====================
  AAAAAAAAAAAA ABCD
  BBBBBBBBBBBBB PQRS
  GENEVIEVE DAVIS
  ABCD DHGFKSDHKSHG
  PQRS DFJHHGS
  EEEE SDT85604ET
  =====================
  
  Now I need to post a warning/msg to go when-validate-the field Code. So now if I'm on the first record, the alert/msg will appear for code ABCD which is Ok. Now, on the next album, I get a different code PQRS as indicated above, the new alert appears which is Ok. If I enter a code that has been previously entered into the record block multi and alert/msg had been exposed to the only first alert/msg need is not displayed now know if I enter ABCD again the fourth record, the alert should not be displayed.
  Note that this must be done at the time of data entry itself. I guess that maybe it can be done by using groups Records / table plsql.
  
  Help with a way to solve this matter will be highly appreciated...
  
  Thank you and best regards...

  As you have already guessed, you must be able to keep track of how many times a value has been entered. If you know what all the possible values of 'CODE' at design time, you can create a counter for each value variable, but it would be a total pain. A better solution would be to permanently keep a total dynamics you can quickly check against. For this I recommend you use a group of registration of forms. Take a look at the demo of Forms - record group treatment (duplicate values check) I wrote. Using the packet of forms Rec_Group condition in this demo, you can easily change the process listed in the working document in your scenario. Follow all the steps in the demo. For your situation, you must change the when-validate-Item trigger so that instead of checking the dupicates and omitting the form if a duplicate is found, you check the number of entries to a value in the record group and display a message if the number is 0 or not to display a message if the number is greater than 0. Your modified WVI trigger might look like this:

  DECLARE
     ignore     NUMBER := 0;
     bignore   BOOLEAN := FALSE;
  BEGIN
     IF ( :YOUR_BLOCK.CODE IS NOT NULL ) THEN
        ignore := Rec_Group.Get_Number(Rec_Group.rg_name, :YOUR_BLOCK.CODE);
        IF ( ignore = 0 ) THEN
            -- Display your message
        ELSE
            -- Don't display any message
        END IF;
        /* add the code to the record group */
        bIgnore := Rec_Group.Add_Value(rec_group.rg_name, :YOUR_BLOCK.CODE, :system.trigger_record);
     END IF;
  END;
  

  Hope this helps,
  Craig B-)

  If someone useful or appropriate, please mark accordingly.

  Published by: Silvere March 30, 2011 15:07

• Kernel data Inpage Error... Memory dump... Please help me

  Hi my name is shoaib.

  I am facing a problem of blue screen approximately every 20-40 minutes. I run the memory test and you indicates no error. I check the RAM via the command "mdsched.exe" and she also don't say no found error. But when the blue screen appears it is said on the top of the page "kernel data Inpage Error".

  Please tell me what to do?

  Here is my file link "msinfo32".

  http://1drv.Ms/1Lu9SpH

  I have not found any "directory Minidump" in C:/windows. Please suggest me what to do. I really need your help. Thank you

  If you stopped crashing run a trace of windows performance when you encounter the problem

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask
  
  
  Please run the trace when you encounter the problem

• How to read the values of the scale of a graph of intensity?

  My goal is to read the scale varies (SHOWN Max and min values) of a graph of intensity.

  I want to do a scan of a box, graphically display the result in the graph, zoom in on something interesting, and then use the zoom coordinates to define the area for the next analysis.

  Is this possible and how?

  If not possible, is there a work around?

  Use the nodes property 'XScale.Range' and 'YScale.Range '.

  

• Using the scale tool

  When you use the scale tool in cs4, I select an object and resize it. Is there a modifier key that I can use to quickly disable my object and select another? I don't mean click V to select the selection tool main then Q for the scale tool. I want to know if there is a key that you can temporarily hold to return to the selection tool, as Photoshop allows you to use the Cmd key.

  Select an object. Press 'Q' and you can use the scale on that tool. you want to unselect this object and select another? Double-click on the outside of the object and the scale tool is more selected. Then, simply click on another object, press Q and use the scale on it.  And so on.

  Here's how I do... You don't need to press ctrl/command to temporarily exit the scale tool. If you simply need to do the paper round (use the hand tool, for example, while always after selecting the scale tool), just press SPACE, go where you want, free space, and continue to work with the scale on the selected object tool previously...

  I hope this helps!

• Repeat the installation of XP SP2 SP3 chess & (0xc0000005 error message)

  original title: repeated failure of XP SP2 SP3 installation &

  Computer - 32-bit intel running Win XP SP1. Before the blue screen of death and sys fatal error: "logon windows process is complete w / status of 0xc0000005 (0x00000000 0x00000000)" computer ran SP2.  However once I got XP with the ERD installation, system not subsequently install SP2 (which has no x 3). Before the blue screen of death, I had a lot of crashes with IE and had tried to install SP3 several times (at least 4 x and it has always failed).  Last week, cleaned the registry with CCleaner and today cleaned registry with Windows Registry Editor (that I got from MS and installed the code in Notepad and ran). SP 2 fails to install. At first there was a message. So I uninstalled Norton, thinking that may be preventing them working right. (Since I had Norton until today I think not machine is infected.) After cleaning the registry, I got a new error: "Entry point procedure DecodePointer is not found in KERNEL32.dll dynamic link library" is there anything else I can do? Thank you.

  Since its impossible to say what your registry cleaning did I think that at this point I would do the following:

  (1) download and create the startup disk check utility of your HD manufacturers site, for example SeaTools for WD drives

  (2) create the memeory bootable checking the utility from www.memtest.org

  (3) assuming that the two utilities do not present any errors

  (4) pure install winxp, deleting all partitions, create a new one, and then continue with the installation

  (5) install the drivers, if you have a driver disk provided by the manufacturer of the PC, otherwise, create an internet connection, enable the windows firewall, do NOT install any programs or admit MSUpdate run

  (6) If a large PC manufacturer for example Dell / Hp or laptop then visit this site of decision-makers, specific to your model and update all drivers, if a generic PC card so if material individual responsible, for example the motherboard, sound, video, these last two are not on board the motherboard

  (7) then run MSUpdate, configure it to Important updates ONLY, and NO updates recommended - you may need to repeatedly run MSUpdate

  (8) then check the operation of your PC. Unless you have the latest version of Norton I forget and try http://www.microsoft.com/security_essentials/

  (9) only after all seems okay if you think about installing software