New 120 GB HARD drive is recognized in Satellite 1950 801

Similar Questions

• 120 GB HARD drive is compatible with Satellite L35-SP4090

  Hello ervery body.

  I have a Tosbiba Satellite L35-SP4090 and I want to buy a 120 GB hard drive.
  My question is?
  This hard drive will be compatible whith my laptop?

  Please, I need their help.
  Next time.

  Hello

  As far as I know the laptop Satellite L35 was equipped of different SATA drives.
  I'm 100% sure that it supports a 80 GB and 100 GB of HARD drive
  I think you have a good chance that the L35 would support a 120 GB SATA HDD too.

  Concerning

• Satellite A200-28R - new 500 GB HARD drive not recognized

  Hi all!

  The BIOS cannot recognize my new 500 GB SATA HARD drive. When I connect it to the laptop, BIOS says "No device" in the drive options. Tried jumper allows you to change the interface of disc HARD SATA-1, but without effect.
  How can I force the BIOS to recognize?

  Toshiba Satellite A200-28R
  BIOS version: Phoenix v.2.60 for Vista
  HARD drive: Seagate 500 GB 7200 RPM SATA

  BTW: my old 250 GB HDD works fine

  Hello

  Have you tried the drive in another computer?

  Maybe your new drive HARD isn t working properly or defective so use another rnotebook to test it or request a replacement HARD drive.

• Qosmio F30-117: A single HARD drive is recognized after upgrade to 120 GB

  I have a Qosmio F30-117 with 2 x 60 GB Toshiba hard drives installed. I want to switch to 2 x 120 GB HARD drive, but my Slot 1 does not recognize the HARD drive as being present. Slot 2 recognizes that a 120 GB HARD drive is present.

  This happens with two 120 GB hard drives installed in the two slots and when inverted as well. I don't use RAID so no mirroring happens.

  Any clues out there?

  Hello
  I think that it is will not be problem.
  Try putting 2 HARD drive and then install a sistem.
  Otherwise, you can not lose a sistem on old first HDD, if you have a problem.

• Satellite 2410 won't see the new 250 GB hard drive

  I am trying to upgrade the Toshiba 30 GB hard drive that came with the unit to a Western Digital Scorpio Blue 250 GB EIDE drive.
  I get out the swap the 30 GB to 250 GB put in a bootable XP SP3 CD version and nothing - no sign that power came to training.
  The CDROM is trying to write files on the hard disk, but nothing happens.

  Same thing happens when I try to use the pack of 3 CD of Toshiba or the Norton Ghost recovery CD.
  The computer does not see the drive. Put the old 30 GB drive and it starts right now.

  My BIOS settings show set up for EIDE and boot from the CDROM. What I'm missing?

  Hello

  It seems that the BIOS does not recognize the new HARD drive, I suppose that it s too big
  Satellite 2410 series is old and I guess that it will not support larger 120 GB HARD drive because of the 28-bit LBA s

  So try with the smallest HARD drive like 80 or 100 GB.

  Greetings

• To upgrade Equium A100-027 with 120 GB HARD drive

  Hi all

  I am looking to upgrade my Equium A100-027 - HDD to 120GB unit

  can anyone of you inquire as to which unit of HARD drive, I need this upgrade

  best regards

  Hello

  The A100 series is one of the new series of laptop that exists on the market. So I see problems with the upgrade of the 120 GB HARD drive
  Please note that the phone supports an interface Serial ATA (SATA) and the new HARD drive should also supports this type of interface.

  have a nice weekend ;)

• Satellite A200 - hard drive not recognized

  Hello. Deploy a satellite A200.

  Original problem would not initialize only power light and hard drive light came on a second, nothing on the screen, not access to the parameters of F2. Reinstall memory, no go, deleted the test and drive hard and read disc hard ok in an external enclosure. With disk hard deleted computer will start after market boot disk and running program diagnosis ok. Can now access the settings of F2.

  Format external hard drive, reinstall and start with the startup disk, hard disk appears in the bios, the test runs diagnostic ok.
  Tried to install Windows XP and XP pro and windows twice starts to install and then comes up with an error saying there is no hard drive present, even if the Bios and a diagnostic boot disk at the same time recognize the hard drive.
  Tried another hard drive with the same problem, not recognized.

  Any ideas?

  Hello

  Have you tried to reinstall Windows using the Toshiba Recovery disk? Normally with this record everything should work fine because it s pre-tested and specifically designed for your laptop.
  Check this box!

  In the worst cases, your HARD drive is faulty and you need a new. The HARD drive seems to have random failures.

• Windows 7 does not recognize the new WD external hard drive added to the usb port

  Recently, I tried to add my third USB WD hard drive to my computer.  It's a My Book Essential.  The meter turns and the virtual cd drive is listed in WD, but the hard drive itself does not appear on the list of devices with a drive letter.  My my first two books are readers: J:, and L: I have no "new device found" message   I search for new devices and it the PC do not find anything.  If I click on the virtual CD drive (M :) it askes if I want the computer to allow WD to make changes...) I say Yes and the screen flashes and nothing happens.
  The drive be defective?  Any other ideas?

  Hello

  Have you tried to connect the external hard drive on another USB port?

  Try to connect the WD external hard drive on another computer.

  Follow these steps:

  Method 1: You can run the troubleshooter in the following article and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also, run the Fixit.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  a. click Start, type disk management in the start search box and press enter.

  (b) if the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article change, add, or remove a drive letter

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• I want to clone my original equipment existing 500 GB HARD drive to a new 1 TB HARD drive replacement. How?

  G ' Day,.

  I'm getting too big for my old 500 GB HARD drive, so I bought a new 1 TB HARD drive.

  Now I have all of the rescue disks that I made when I first got my laptop Compaq Presario CQ57-105TU . I could use them & fresh install all software & original OS, but then I have to start from scratch and re-install all the software I have installed, in addition to redo all adjustments & changes I made to the Windows 7 operating system since the first day - a year ago.

  Not really how I want to spend the next week or two around.

  I would like to clone the orig 500 GB HDD & all of its content to a new 1 TB of HARD drive.

  Sounds like where I want to go, but for 1 small question. I heard that if I just I'll have about 500 GB of space available new but I was also told that I will not be able to create new partitions of disk on the new HARD drive because of any existing partitions on the original HARD disk are created.

  1. is this true?

  2. in the case, where can I find a failsafe procedure to accomplish the clone, & then create 2 new partitions to cover the free space on the new drive.

  3. If so, is there a work around? If there is what is the procedure (plse give me cramps of brain with the jargon of techno... tnx)

  Some additional information that might be important.

  At the present time, my HARD drive has this configuration:

  

  Now that (Q) Local drive is diferent.  It shows 0 bytes available & 0 bytes used, & I don't have access to it.

  Computer of my wife... another laptop CQ62 model... also has the same drive,

  but hers is labeled as Microsoft Office 2010 Starter... as 0 bytes available & used - also no access, & as below, not showing is not in Dmgt.

  This drive does not appear in my Configuration of MANAGEMENT OF RECORDS : http://i.imgur.com/r4LPrDa.jpg

  Thanks for your time & consideration... Bobby

  Him early bird gets the worm, but the second mouse gets the cheese

  OK...'s done it!

  I used my CLONING HDD DOCKING STATION friends exactly like this, but he bought from a different seller 2 years ago.

  All I did was take my 500 GB drive original & placed in A slot (the front slot - Master) & I placed the new Toshiba 1 TB disk in slot B (the second slot behind Slot A... Middle - Slave). I turned the power on the box. I waited until readers spun & were ready, & I don't have a press the red button on the box...

  25% light started to blink & cloning began...

  About 40 minutes later 50% light began to Flash & the 25% brightness has remained stable.

  This means that 25%of the process has been done, & he went to 50%. .

  This sequence was continued until finally all the lights were on fixed (25% to 100%) which means that the clone was complete.

  I think it took about 2 hours and 15 minutes to clone completely.

  I closed the box power off. Then, I removed the two discs.

  I installed the new drive in the laptop carefully, & reinserted the battery, & I plugged power/charger/adapter sector of the laptop.

  Then, I ran into my fingers & press work / laptop computer shutdown.

  A few seconds my laptop has been as always to initialize.  I just had to check to make sure that I have installed the new drive... & Yes the one on the desk was the original, no doubt which means that my laptop startup disk was indeed the new drive I cloned just to.

  My laptop is started without fault!  without a hitch. Just as he always had.

  I used my computer management Administrative tool - disk management & made a simple volume for the 450 + GB of free space, affecting the next letter available player - in my car (F) case & I named it so.

  Everything worked perfectly, I can read & write on the new partition/volume. As I mentioned previously, I probably won't be able to start from scratch, but my drive (C), but it's fine for me.

  So, what have I learned?

  Well, first of all, my Compaq Presario CQ57-105TU can go to 1 TB of HARD drive without modification.

  Using the cloning method, I did no doubt saved full at least 1 weeks of resettlement work if I selected the new installation method using backup/rescue disks when the computer was first, I created started way back when.

  Outside the 2 + hours time, it took to clone the drive, 15 +/-minutes initially to remove & reinstall the drive, & the time it took to assign the new free space a drive letter (every 5-10 minutes) the procedure was clearly simple cut, I know could have been done differently, but not as simply as the method I chose.

  Pepe, thank you much for the time you spent researching my issues & responding to my message.

  I'm so glad all your fears & roadblocks have been made not, & in the end, it was possible to accomplish the task against our initial concerns - count in a very loose way with the greatest ease.

  Here are some pictures of the Station of Clone (the box) exactly like the one I used:

  

  

  Congratulations to all,

  Bobby, alias DreamRyderX

• Hitachi Lifestudio external hard drive not recognized on Windows Vitsa... why?

  I have a hitachi lifestudio external hard drive and it works great 50% of the time... the other 50%, I fight because it not being recognized on my computer or laptop (both vista).  I plugged it to my computer now and it will only recognize the player but is not the one with my files that I need.  I have two USB cords connected and it was working fine yesterday!  Now all of a sudden it won't work at all.  I got and rehooked many times now and still nothing.  Other USB ports are filled with our wireless mouse and others.  Is there a way to force vista to recognize something?

  Hello

  ·          Were there any changes made to your computer before this problem?

  Step 1: Try running Microsoft fix it in the following article:

  Reference: http://support.microsoft.com/gp/hardware_device_problems

  See also: http://windows.microsoft.com/en-US/windows-vista/Tips-for-solving-problems-with-USB-devices

  Step 2: Check if the external drive is getting detected in disk management.

  If the hard drive is recognized in disk management and if there is no letter assigned drive, I suggest you make a right click on the drive and assign a drive letter and check to see if it helps:

  Reference: http://windows.microsoft.com/en-US/windows-vista/Change-add-or-remove-a-drive-letter

• Install Windows 7 on a new 3 TB hard drive

  I'm trying to install Windows 7 on a new 3 TB hard drive.  During the installation, I get a screen that says no hard drives have been found.  Windows installs the boot files on the X startup disk but nothing else.  The motherboard is an Intel DZ68BC and the Bios is set to boot from the UEFI.  All of the suggestions.

  Hello Keith,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem can occur if the storage controller and chipset drivers are not updated or due to incorrect BIOS settings.

  I suggest you use the steps in this article and check if it helps.
  Reference:
  Windows 7 installation problem: hard drive not found
  http://Windows.Microsoft.com/is-is/Windows7/Windows-7-installation-problem-hard-drive-not-found

  Note: Changing the BIOS / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• PC crashed - installation on the new PC or HARD drive

  My PC with one of my installed CC Suite licenses seems to be dead. I am assessing whether I need a new PC or a new HARD drive is internal.

  I have an installation on a Mac (that I want to keep), but I was wondering if I can just download "installing PC" on the new PC or HARD drive and allow with my CC Identifiez_ you?

  Will I need to "deauthorise' previous installation?

  I can not access the software CC deauthorise it manually from the dead PC and wonder if I try to reinstall on a new machine, if the system will say just that I'm over my limit of license because I have not already deauthorised installation?

  Thank you very much

  Yes. You can activate the application Adobe CC on 2 machines.

  Please see licenses and terms of use | Adobe

• This HARD drive is compatible with Satellite L30?

  I managed to break (don't ask how) my hard drive on my laptop Satellite L30.
  He will have to find another.

  Could someone help me find where I need?

  Bravo guys

  Hi Matt

  Have you tried to search this forum for more information?
  There are many discussions on models of different laptops and I sure that you might find interesting and useful discussions on the HDD for L30 m.

  For example, I found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=88214

  The guy said that a 120 GB 2.5 SATA HDD was possible.
  I think you could use a bigger HDD as only 120 GB, you can try a 160 GB if you want.

  Cheers mate

• Maximum HARD drive size on a Satellite 1110-Z16

  Hello!

  What is the size of the disk HARD Maxx in a Satellite-Z16 1110?
  Is it possible to install a 120Gig Hdd(2,5")?
  Is there a description for 1, 50-TRAD Bios Update?

  Hello

  I don t think that this laptop and the BIOS will recognize 120 GB HARD drive.
  According to some information in the internet, the phone supports up to 40 GB HARD drive.
  The problem is that Toshiba does not have official information about the sizes of disk HARD max.
  It seems that you have to test

  For BIOS update checks please this document:
  How update the BIOS on my Toshiba laptop and where can I get the latest version of the BIOS for my machine?
  http://support.toshiba-tro.de/KB0/TSB4A00SD000BR01.htm