Satellite 2410 won't see the new 250 GB hard drive

Similar Questions

• PC crashed - installation on the new PC or HARD drive

  My PC with one of my installed CC Suite licenses seems to be dead. I am assessing whether I need a new PC or a new HARD drive is internal.

  I have an installation on a Mac (that I want to keep), but I was wondering if I can just download "installing PC" on the new PC or HARD drive and allow with my CC Identifiez_ you?

  Will I need to "deauthorise' previous installation?

  I can not access the software CC deauthorise it manually from the dead PC and wonder if I try to reinstall on a new machine, if the system will say just that I'm over my limit of license because I have not already deauthorised installation?

  Thank you very much

  Yes. You can activate the application Adobe CC on 2 machines.

  Please see licenses and terms of use | Adobe

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• Satellite A10 won't boot up - bad sectors on HARD drive

  Hallo,

  I have a Toshiba Satellite A10
  Model No.: PSA10E-018EZ-DU

  The problem is that you comp. won't start.
  There are some areas of bad or damaged HD
  I ran chkdsk a few weeks ago, it has helped but now there are still problems.
  If chkdsk is running again.
  Is there a better program to check your HD or should I do something else?

  A new HD?
  What kind of HD am I looking for?
  is a HD for a nootbook oke?
  Or are there restrictions for a HD satellite A10?

  Puts goede groeten
  Kees Folmer
  http://www.csfolmer.nl

  HEY Kees,

  There are other utilities that you can use to check your hard disk (Norton Disk Doctor for example) but CHKDSK is as good as all the others.

  If you get repeated hard disk problems, then this is a good indication to a new hard drive. I suggest you try to backup your data even if you can't always. I'm not aware of any restrictions on the ability of any hard drive that you choose for your A10, but it must of course be the same as your existing drive form factor. You can also consider using a drive with a speed higher than the original drive.

  Kind regards

• Satellite 2400-103 - what is the maximum size of HARD drive?

  Hi all.
  New here.

  Nobody knows what the maximum hard disk size is for a Satellite 2400-103? This laptop has a 30GB HARD drive which is complete at the moment and I'm moving to a 160 GB unit.

  Used software - DiskCopy - clone Moose 30 GB of cloning to the new 160 GB drive. This creates a partition on the disk that is the same size as the original (about 28GB). If the new hard drive is installed on the laptop at this point, the laptop will be start OK. If I use a partition manager - Partition Magic - to resize the partition to the size of the new disc (about 150 GB) then the laptop does not start.

  Would it because there is a limit on the size of the hard disk supported by this laptop?
  If so, what is the limit?

  Thank you and best regards.

  Mike

  Hello!

  Satellite 2400 is very old notebook, so I think it has a limitation of LBA 28 bits. This means that you can only use up to 128 GB of free space so the maximum capacity of the disc HARD would be 120 GB. So I think that's the reason why the computer laptop can-t start successfully with the 160 GB model.

  In your case I bring back the 160 GB model to the computer store and ask one another 120 GB one. It should work normally

  Good bye

• Satellite 2610 CDT: what is the maximum capacity of hard drive?

  Hello

  I want to add a new hard drive to an old laptop Satellite 2610 CDT. However, before buying a new drive, I want to be sure that it will be properly recognized by the BIOS. The operating systems (Win 2000 and Debian) I will use can handle large capacity disks, so that they are not a problem here.

  How can I determine the maximum capacity of the hard drive that will be recognized by the BIOS? The BIOS supports LBA-48 address?

  Thank you very much!

  According to the specifications of the laptop computer supports a 6 GB HARD drive.
  You can try with 10 or 12 GB of HARD drive.

  These hard drives are cheap and I don't see any risk with the upgrade. Test it!

• Satellite Pro 4600 - what is the maximum size of HARD drive?

  My age Satellite Pro 4600 has a 20 GB HARD drive. These are now very difficult to obtain, does anyone know if superior capacy HDDs can be used and, if so, what is the maximum size of the HARD drive.

  (Despite his age that I always use the Satellite Pro for some jobs).

  Hello John

  Satellite Pro 4600 is old enough for laptop and it is not easy to find the exact info. The fact is that this laptop comes with 10 and 20 GB hard drives.
  My opinion is that you can use 30 or even 40 GB HDD. I think that 30 GB new HARD drive should be enough for your some jobs.

  What do you think?

• Satellite M30-604 only see a capacity of 128GB HARD drive from 320 GB HARD disc

  I have a M30 604 with XP - SP2 and bios version 1.7
  I installed a new internal 2.5 "320 hard drive - but the XP Disk Manager sees only 128 GB of total capacity. There is not yet any unallocated space.
  East phoenix 48-bit LBA compatible bios?

  Akuma is right. This is a technical limitation and there is nothing you can do about it.
  With SATA HDD, it might be possible to see all HARD drive capacity, but not with PATA old drive.

• HP Notebook: the new laptop HP hard drive partitions

  In my previous PC, I split the drive into 2 partitions: 1 for the OS and the other for my data, so that I can made the recovery of the operating system without losing my data. Do the same thing on my HP laptop? How can I do? And, if I managed to create 2 partitions of the hard drive (1 TB), 1 for the operating system (windows 10 Home) and the other for my files and data, I'll be able to recover the operating system? Sorry for the bad English and I thank you.

  aaff00

  Hello;
  
  Let me welcome you on the HP forums!
  
  When you look at the player on this new laptop, you will see that there is already several partitions on it - because it is very probably in the GPT format, not the MBR formatting you are used to.

  That said, you could reduce the OS partition to add a partition of data, as you did in the past.

  You must use a tool of partitioning for this, which one is this: Best Free Partition Manager for Windows | MiniTool Partition free

  As for power, then later use the HP Recovery Manager - probably not.  While it might work, one of the first things that is completely reformat the hard drive and will erase everything you have saved on this subject - and it will reformat the drive to match the original settings in the process.

  Good luck

• Windows 7 does not recognize the new WD external hard drive added to the usb port

  Recently, I tried to add my third USB WD hard drive to my computer.  It's a My Book Essential.  The meter turns and the virtual cd drive is listed in WD, but the hard drive itself does not appear on the list of devices with a drive letter.  My my first two books are readers: J:, and L: I have no "new device found" message   I search for new devices and it the PC do not find anything.  If I click on the virtual CD drive (M :) it askes if I want the computer to allow WD to make changes...) I say Yes and the screen flashes and nothing happens.
  The drive be defective?  Any other ideas?

  Hello

  Have you tried to connect the external hard drive on another USB port?

  Try to connect the WD external hard drive on another computer.

  Follow these steps:

  Method 1: You can run the troubleshooter in the following article and see if this fits the Bill.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Also, run the Fixit.
  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Check if the external hard drive is recognized in disk management and assign a drive letter to the same.

  To open disk management, follow these steps:

  a. click Start, type disk management in the start search box and press enter.

  (b) if the drive is detected in disk management, I suggest you to assign a drive letter and see if that does the trick.

  For instructions, see this article change, add, or remove a drive letter

• Portege M400 unable to find the new 320 GB HARD drive

  Hello

  I'm moving my 80 GB HARD drive to a new WD 320 and research questions. Although I've updated the Bios with the latest version of the disk hard is not down to any operating system when it is in the main HARD drive Bay. The weird thing is completely visible in the removable Bay. Is this a configuration issue, I am missing or is the machine not reconise the 320 GB drive because that is the essential motivation?

  Any help or pointers would be great

  Thank you

  Hey Buddy

  In my opinion, your new HARD drive cannot be recognized because of the size of the HARD drive.
  The 320 are simply too. I think that the laptop would be able to use a 100 GB or 120 GB of HARD drive but the 320GB are not supported.

  So change your disk of 320 GB to a smaller size and try again.

  Good luck

• 3110CT: BIOS recognizes the new 20 GB HARD drive

  Just installed a P002608, in a protected 3110CT 20 GB hard drive, now, the BIOS will not recogize the new hard drive.

  Hello

  I think that you will not be able to use this 20 GB HARD drive on this good old classic.
  It seems there is a BIOS limitation and this big HDD will usually not recognized by the BIOS.

  Remember that the Portege 3110 (P311E) has been delivered with a 6 GB HARD drive!
  There is a huge difference between the 20 GB and 6 GB of HARD drive!

  In my opinion you should try other drives that support a smaller size

• 4540 proBook s: help to the New Installation of hard drive recovery

  I had a bad hard drive crash. I installed a new and got the bios to boot from the cd drive, with windows 7

  orginal cd of installation in the drive.  He acknowledged drive 0, I clicked again in the options. He created a system partition.

  Installed windows 7 apparently very well. Inserted the recovery driver and application and installed disk. Everything seemed fine. This morning I turned it on and it the hard drive error (3F0) Please install an operating system. I shut it down and restarted, it seemed normal.  I installed a few programs, stop it again. Returned by, it starts again and it took me to screen diagnosis saying SMART Check - not installed and short DST - not installed...  Can someone tell me how to remove that partition and I can format the drive in a usb sata enclosure and try again.

  Please tell me the correct procedure to return this laptop running to a factory State. I have the original Windows7 and Windows8, Driver and Application for the two OS disks ' are...  I want to stay with the installation Windows7.

  Thanks for any help on this problem. I have no idea where I was wrong!

  It is not impossible that the new disk is bad, have seen before. It is also possible that the controller sata on the motherboard is bad, but I'd watch this last possibility. You can get an Exchange on the new hard drive?

• Image portable HARD drive for transfer to the new computer portable HARD drive on the same laptop

  Location:

  Laptop was to receive the new HARD drive more big;

  Configuration is complex and has a lot of data and SW engineering.

  Own re - install would take too long.

  In operating systems earlier I just created an image, installed the new HARD disk and restored the image.

  In Vista, it does not. New HARD drive with image does not start. (Partition is correctly selected as active)

  Tried other methods, including Robocopy but without success.

  Sysprep is the right solution? If so, how will this affect users profiles and installed applications?

  Thank you

  Paraxis

  Hi Paraxis,

  Whenever we use the system image and restore from it, the hardware must be same, as has already been made to backup. The hard disk partition should also be in the same size.

  You can use Sysprep on your computer and check if that helps you solve the problem.

  Preparation system (Sysprep) tool is a technology that you can use with other deployment tools to install Windows on new hardware, operating systems. The Sysprep tool prepares a computer for imaging of disc or delivery to a customer of the configuration of the computer to create a new computer security identifier (SID) when the computer is restarted. In addition, the Sysprep tool cleans up user-specific and settings specific to the computer and the data that should not be copied to a destination computer.

  Access the links below for more information on Sysprep.

  http://TechNet.Microsoft.com/en-us/library/cc721940 (WS.10) .aspx

  http://TechNet.Microsoft.com/en-us/library/cc766514 (WS.10) .aspx

  I hope this helps. Let us know the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite M45: Cannot boot from the CD-ROM or HARD drive

  I get the following messages...

  WHEN BOOTING FROM HDD: "Invalid partition table".

  At the START of the CD: "No Bootable CD in ATAPI CD-ROM.
  By so, even though I have the recovery CD and the computer can not read them.

  I tried to change the order of boot without result. Created a bootable CD Bart, who works in my other computer, but not in this laptop. Are there special drivers, I need for this CD?
  I'm out on this one.

  Thank you

  Hello

  I think that your partition on the HARD disk is damaged and so you cannot boot from the HARD drive.
  In this case, the HARD drive must be formatted completely and then you could try to install the OS.

  It seems also that your drive cannot recognize the CD bootable (WinXP?) and, therefore, it of not possible to boot from the drive.
  Well, it really stupid s :_| situation really stupid!

  However, did you try to boot from another CD? For example Microsoft Windows original CD?
  If not I recommend you to do and eventually the reader will be able to read the CD.
  If this isn't the case, so I think that the reader must be checked. Possibly it also corrupted s.