New ACR with CS5 and LR3.4.1 installation problem

Similar Questions

• obvious diff color b & w CS5 and LR3

  I have a strange problem with CS5 and LR3

  I use LR3.6 and CS5 on an imac running 10.7.2.

  I discovered an old 'hand tinted' b & w photo from the beginning of the 1950s. I thought I could improve it in CS5. I have started the process but had to stop before finishing. I have trunk to save it in LR3 as a .psd and a jpg file, to allow more flexibility when I went to change it later. I noticed a problem:

  .

  Although not finished editing, I noticed a remarkable difference in the tone of the photos as stated.

  I thought that the problem was related to the original being a b & w photo but reduced it. Monitor is calibrated. both are in prophoto RGB. any ideas.

  THIS IMAGE IS AFTER IMPORT IN LR3. LR3. NO pre-selection was applied

  .

  THE IMAGE BELOW IS BEFORE IT WAS IMPORTED IN LR3

  

  any help, suggestions? Thank you, vince

  ssprengel, you nailed it. I sent the image of LR3.6 (darker image) to CS5 via original edit in CS5.

  IMMEDIATELY, a missing profile WARNING popped up. I hung profile PROPHOTO and images then matched.

  Thanks for forcing me to think a little

• I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all s

  I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?

  If you don't have local copies of your site on your computer...

  1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel

  3 when you are prompted to hit "get the entire Site? Yes

  4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info

  5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel

  If you have a site already defined for your old Web host, go to #4 above.

• I can't stop the pop-up and adware ads in Safari. When I opened a new take, it is locked until I click a place twice, then two new tabs with advertising and virus detected by safari emerge

  I can't stop the pop-up and adware ads in Safari. When I opened a new take, it is locked until I click a place twice, then two new tabs with advertising and virus detected by safari emerge

  I tried following the instructions on the support page, in Apple, but it did not work.

  Force to leave Safari, then with the SHIFT key, restart Safari.

  Also use EtreCheck of www.etrecheck.com and see what else is running.

• I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  Hello

  I have created a new domain with win2012r2 and created users. Add after the client in my area so that the newspaper with the user I get error below.

  "You cannot connect because the logon method, you use is not allowed on this computer, please, see your ad min for more information network"

  Please help me with that and I don't want to give permission to admin for all users group...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How can I transfer CS5 and LR3 from a PC to a Mac?

  How can I transfer CS5 and LR3 from a PC to a Mac?

  Hi nataliewebb05,

  It depends on if the version you bought originally was only for Windows platform or it-platform like Windows version does not work on Mac.

  Here are the download links:

  CS5: download products CS5

  Lightroom 3: http://prodesigntools.com/direct-download-links-for-lightroom-3-and-photoshop-elements-8.h tml

• I just installed for CS5 and my option for installation of the shares does not... How to install?

  I just installed for CS5 and my option for installation of the shares does not... How to install?

  I'm just not my palette actions checked.  Fact.  Thank you.

• Problems of cloud with CS5 and CS6 tests had

  Hi all;

  I asked for advice on this here before, but I've sorted it now and I wanted just that comment here.

  I have CS5. I added Muse and PS CS6 trial / beta. Which have been removed as they should be removed. I acquired Cloud.

  I installed the most recent request manager.

  I have to use CS5 and CS6 because I wrote / write on both courses.

  Whenever I start a CS5 application on the next startup app CS6 I wonder if I want to buy or such. "0 days left"...

  Now who can be resolved in the manner as explained in the FAQ here (login etc.), but I have noticed it is therefore not a question of an 'old' Application handler.

  Its a bug or such.

  Maarten

  Dave;

  Thanks for your reply.

  I had this problem yesterday, soon as my man App updated itself, when I opened it. If that doesn't help (or maybe it does after reboot).

  In any case this isn't really a problem; I click on acquire or such and that's it.

  I just wanted to comment.

  Maarten

• New computer with Windows in a Virtual Machine installation

  Hello

  I want to do a clean install on my new computer, so I can run Linux as main OS with Windows 7 on a virtual machine using VirtualBox.

  Is it possible/legal? How can I activate windows?

  EDIT: I forgot to mention that I have an OEM windows license.

  See you soon / Erik

  Yes, the end-user Windows 7 license contract permits.

  2. INSTALLATION AND USE RIGHTS.

  a. one copy per computer. You can install one copy of the software on a single computer. This computer is "licensed computer.

  b. a computer license. You can use the software on up to two processors of the computer under license at some point. Except as provided in these license terms, you cannot use the software on any other computer.

  c. number of users. Except as provided in these license terms, only one user may use the software at a time.

  d. other Versions. The software may include several versions, such as 32-bit and 64-bit. You may install and use only one version at a time.

  d. use with Virtualization Technologies. Rather than use the software directly on the licensed computer, you can install and use the software within the single virtual (or emulated) system on the licensed computer. When used in a virtualized environment, content protected by digital rights management technology, BitLocker or any hard drive full-volume encryption technology is perhaps not as secure as protected content not in a virtualized environment. You must comply with all national and international laws that apply to such protected content.

  You may need to use the activation of the phone well:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Is After Effects CS5.5 only PowerPC? (Installation problem)

  I just installed Adobe Creative Suite Production Premium 5.5 on a new (2012) Mac Mini (Intel Core i7 processor) running OS X Lion mountain 10.8.2.  Most of the applications installed correctly, but After Effects CS5.5 gives me the following error when I try to launch:

  Cannot open the application "Adobe After Effects CS5.5" because the PowerPC applications are no longer supported.

  I tried to uninstall and reinstall the app (with Flash Catalyst, which also fails), but the error remains. What is the problem here? Is it an installation problem or After Effects CS5.5 is really not compatible with my new hardware/operating system?  Any suggestion is appreciated.

  OK, answered my own question.  I was installing on a Mac Mini, which does not have an optical drive, so I used a remote optical drive to install on my network.  It turns out that confuses the installer.  I finished copying the DVD to install it on a flash drive and the installation of one.  Problem disappeared.

• CS6 - Web and Design Suite - Win10 installation problems

  Hej all

  I have a new computer and have been (unsuccessfully) trying to install my Web Design CS6 follow up on this. First I tried (two or three times) to use the download - but it works all the way. Installs as Acrobat Reader worked for this, but Photoshop, Dreamweaver, InDesign did not. So I thought that maybe the file is corrupt and tried to install it from my purchased DVD. Come to the same result - installation works completely, but ultimately, I receive a warning that some products have not been installed correctly. I also have the option to look at the summary - the mistakes that I clicked on. But cannot open the file - now, I checked in my records (according to Adobe FAQ), and he says:

  06/09/16 17:01:19:536 | [ERROR] |  | OOBE. OF |  |  |  | 3352 | DF024: Cannot move the file in "C:\Program Files (x 86) \Common {9D3BB9DA-1F59-4DCF-A0BB-691FA8EA2582} \_340_871c903a90c4 5ca08a9d42803916c3f7.

  DW063: Error to reverse order...

  DF023: Cannot delete the copy of files to...

  DF037: Cannot delete the directory...

  DR011: Registry permissions checking.

  I uninstalled all associated with Adobe and run CCleaner to remove all that concerns my registry as well. Unfortunately - without success. Which leaves me confused and without my programs on my computer.

  On my machine:

  It is a PC, running Windows 10 Premium 64-bit. There an i7 from intel and is this year - I can run and install the CC Photoshop (for example) and all the rest. I'm just not able to install my suite CS6 correctly.

  Does anyone have an idea what I could try to do? I am at a loss...

  Thank you

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  -so if you have an older, program update you to Windows 10 at YOUR risk of problems

  -You can get CS6 and previous programs to install and run, or you can not (some do, some don't)

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or run as Administrator http://forums.adobe.com/thread/969395 to assign permissions Windows COMPLETE can help... said yet, but sometimes it is necessary for all Adobe programs (this is same as using an administrator account)

• Game Google closes on start after ICS upgraded on CRA S, accounts and sync empty, guide installation problem

  I have improved my s bow to ics, 4 days ago, I used google play for the first time after the update today. It closes at the start. I checked the accounts and sync, my google account is not there, the whole list is just... empty. I tried the installation guide, at the stage they ask to connect to services and sync, I clicked on the google button and click and click, click, nothing, all other icons work (like facebook), I searched for gmail app, does not exist... Seems too late to ask for help but im repair my phone using the pc companion now, hope everything works again... just turned on my phone, I have the feeling that nothing will change... really sad that Sony didn't know what... I can not access google services at all... just weird

  If I were you I could repair the phone with EXTRA and see if that fixes the problem

  Update Service (SUS)

  http://www.sonymobile.com/GB/tools/update-service/

  http://www-support-downloads.sonymobile.com/Software%20Downloads/Update_Service_Setup-2.11.12.5.exe

• transfer all the files from a hard drive to new Hardrive with windows and office suit

  I tried to transer all my programs files again hardrive but without success using easy to migrate acornis.

  Will I need to reinstall Office

  Depends on if you have followed the instructions, immediately after the migration/clone that you will need to shut down the pc, replace the old disk with the new (leave the old disconnected) then restart. Assuming that all is OK, you then stop and connect the origonal HD as a slave, before the abolition of its partitions and then create a new.

  Office "may" need to be repaired, to a certain extent depends on the version.

• New firmware with RDS and WMA lossless

  in the next version can you include RDS and WMA lossless format support... Also a kind of if possible noise reduction

  Only firmware can not give us RDS.  The FM radio chip currently used in the rocket does not support it.  The cool SlotRadio player has the RDS capability.  Perhaps, in the future, the Sansa support RDS, but it's a hardware problem, at this point.

  It is very nice to be able to identify this cool air currently on the air.  RDS has grown slightly in recent years, as it started with very poor implementation, according to the broadcaster.  We would often inundated with stupid shit like the slogans of the station, raffles and contest presentation texts, the temperature today in Hoboken, NJ and other.

  The extent of the wma lossless, consider that once you do business with "Lossless", it is a question of efficiency of compression, a platform practice coding and decoding smooth at the end of the player.  Oh, and good support for tag.  FLAC works very well and he has the promise to be around as a standard for archiving for years to come.

  WMA has the advantage of being native to Windows Media Player, a platform that is relatively easy to work and convenience in the form of marking.  I have my reservations about a good implementation, see the debacle on WMA Pro for example.  Microsoft may be their own worst enemy, well, well, they are their own worst enemy, because it seems obvious that they cannot just try their own interfaces and fix the quirks.

  Spend a lot of time with the chicken, I can assure you that it is not unlike a gourmet meal with toothpicks.  And throw in one of those new titanium sporks for good measure.

  FLAC supports ID3 tags, is open source and works very well.  For a codec I would use mainly as a reference for the archiving of the original PCM of disc, leaving open to the "nuances" of Microsoft is not simply attractive.  I remember the nonsense to use Microsoft Word for many years and his worrying propensity for lack of reverse compatibility.  Writing reports in the fire service, I had to always remember to save copies of format "rtf" so that computers with different versions of Microsoft Office can read the documents.

  Bob

• How to reconnect the new database with oracle and oracle mid infrastructure

  course oracle environment;
  Database; 10gr 2 (10.2.0.1) old-SID: gtxprod host: 10.30.100.199
  new database; 10gr 2 (10.2.0.1) - SID: gtxprod2 host: 10.40.110.199
  application sever. 10.2.0.1 (oracle mid level.) and oracle infra SSO, forms, reports, portal.
  
  problem;
  I try to reconnect from the application to the new database server. I do not know how?
  
  I went to /opt/oracle/10ggtxinf/network/admin/tnsnames.ora

  # tnsnames.ora Network Configuration File: /opt/oracle/10gasr2inf/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  asdb.gtx.com =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = isdev.gtx.com)(PORT = 1521))
      (CONNECT_DATA =
        (SERVER = DEDICATED)
        (SERVICE_NAME =asdb.gtx.com)
      )
    )
  
  
  gtxprod.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod)
      )
    )
  
  gtxprod2.gtx.com =
    (DESCRIPTION =
      (ADDRESS_LIST =
        (ADDRESS = (PROTOCOL = TCP)(HOST = gtxprod2.gtx.com)(PORT = 1521))
      )
      (CONNECT_DATA =
        (SID = gtxprod2)
      )
    )

  In application of the oracle infra. How Asian Bank of development of database instance can connected with the new data base gtxprod2?
  
  In Forms Server, based on a Web site, if go to Forms Server, I can see tns.ora but I can't see anything to update to the new database.
  
  you could give me information how understand this problem?
  
  Thank you very much in advance

  Hi Wen,

  As you have created a new database 'gtxprod2' so the Stanley database should be in place
  cmd--> lsnrctl status
  That you have even made changes to 10ggtxinf/network/admin/tnsnames.ora
  do the same entry in the oraclebi/network/admin/tnsname.ora file

  You can check if your new entry is rite of
  tnsping gtxprod2 (>)
  Now you ask how the application will come to know what database to point to
  Go to oracle AS
  As using your forms and reports go to oraclebi/forms/server/formsweb.cfg

  At the end of the file, there might be a few entries
  for example
  [test]
  envFile = test.env
  Form = LOGIN_ENT.fmx
  LookAndFeel = oracle
  separateFrame = true
  UserID=nrs_fd/nrs_fd@fixdep
  SplashScreen = NO
  logo = NO
  Background = No.
  color = auto
  make = yes
  Archive = frmall.jar
  archive_jini = frmall_jinit.jar, frmwebutil.jar, Jacob.jar, icons.jar
  ImageBase codebase =
  term = frmpcweb.res
  baseHTML = webutilbase.htm
  baseHTMLjinitiator = webutiljini.htm
  baseHTMLjpi = webutiljpi.htm
  WebUtilArchive = frmwebutil.jar, jacob.jar

  "userid=nrs_fd/nrs_fd@fixdep" IE (username) / (password) @tnsname
  the following entry specifies what database, the application must point to

  If your using a war file, you must create a data source and as datasource, you must specify the tnsname input

  Concerning
  Fabian