new attribute not listed is not on the interactive report

Similar Questions

• Order by does not not on the interactive report

  I've created an interactive report. My select statement contains an ORDER BY clause. When the report is displayed, it is not in the correct order. How can I control the display order of an interactive report?

  An interactive report allows to sort on all columns. Plan to remove the Order By clause of your SQL defining the sort order in the report of the IR, then save this version of the report as the default report parameters

  Jeff

• How can I rearrange the columns in the not displayed section of the interactive report.

  Hello

  My interactive report contains 185 columns and requieres users to build its reports with some columns, but he gets lost between this amount of columns, it would be easier if the columns in the do not display the interactive report section would be automatically sorted, is it possible?

  Thank you very much

  Hi Eva,

  A solution would be to order the column names in alphabetical order. You can create a dynamic JavaScript action to manage the sort.

  The shuttle of the attribute IR "Select columns" have the ID "apexir_SHUTTLE_LEFT" or hidden columns and 'apexir_SHUTTLE_RIGHT' to the displayed columns.

  The function that you create might look like:

  var options = $('select#apexir_SHUTTLE_LEFT option');
  var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
  arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
  options.each(function(i, o) {
    o.value = arr[i].v;
    $(o).text(arr[i].t);
  });
  
  var options = $('select#apexir_SHUTTLE_RIGHT option');
  var arr = options.map(function(_, o) { return { t: $(o).text(), v: o.value }; }).get();
  arr.sort(function(o1, o2) { return o1.t > o2.t ? 1 : o1.t < o2.t ? -1 : 0; });
  options.each(function(i, o) {
    o.value = arr[i].v;
    $(o).text(arr[i].t);
  });
  

  You need to find the right timing for dynamic action to run, I suppose the click on the button "Select columns" would do the trick.

  Kind regards

  Vincent

  http://vincentdeelen.blogspot.com

• Add Javascript to the content of the interactive report

  Hello
  
  I need to add some Javscript to an interactive report so that this event fires whenever the content of the report is reloaded. I found how this is done for a standard report, but not for the interactive report. JavaScript placed in the header of the region or the footer only runs on the loading of the page and not when the region of the report is updated, such as after a search, or when you apply a filter. Does anyone have an idea on how this is done? What is the function Javascript is called is charging?
  
  Thank you
  
  Rick Fanning

  Hello

  This might help you
  http://Apex.Oracle.com/pls/OTN/f?p=24382:38:

  You can find out how to see the source code here
  Implement jQuery modal form

  BR, Jari

• New column in the interactive report do not appear

  After that I created an interactive report with 5 columns that appear on the screen, I changed the query and added another column (also appears in the 'Report attributes' tab) this column does not appear on the page.
  Only if I create the report as it will appear.
  
  Why is this?

  When executing the application, next to the interactive report, click on the little train, must say select columns make sure you that the column you want to display has been selected...

• "of data type not supported" in the interactive report

  Hello
  
  I'm trying to download a file from a link to an itneractive report.
  
  In the section "attributes of report" interactive column, I defined in the section "links" in a column of the 'target', 'URL', and the URL like this:
  

  DOWNLOAD:CONVENTIONS:#FILE_BLOB#:#ID#::#MIME_TYPE#:#FICHIERS#:#LAST_UPDATE#::attachment:Conv

  When I run the interactive report, the link view this:
  Download: CONVENTIONS: [type]:188:C22.pdf:attachment:Conv of data not supported
  
  The table "CONVENTIONS" is defined as follows:
  ......
  ACTIVATE THE 'ID' NUMBER NOT NULL,
  VARCHAR2 (2048 BYTE) "FILES."
  'FILE_BLOB' BLOB,
  "LAST_UPDATE" DATE,
  'MIME_TYPE' VARCHAR2 (255 BYTE)
  
  Where is my mistake?
  
  Thanks for your help!
  
  Christian

  Hello Christina,

  Sorry Wizard, you need to use is the "form > form on Table with Report", because the normal create assistant interactive report allows you to enter a query.
  Once you have completed the wizard, take a look at the generated SQL statement (must use the dbms_lob.getlength) and the value in "number Format / Date" for this column.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

• Excel not downloaded in the same order as on the interactive report

  I have download to Excel on the interactive report, it is not sorted in the same way? Can I fix this?

  Hi Doug,.

  Could be a quick solution to this solution, you can have a download link on the header of the report area and that it points to a page that contains the same report with the csv model.

  Download CSV Report 
  
  where 3 is the page number for csv output report.
  *replace click by onclick
  

  or if you want more control over the report, you can create a button on the interactive report region and at the click of the button run a process to download a csv output file.

  Put dummy code for creating csv file

  DECLARE
  CURSOR cEmp IS
  SELECT
       Eno,Ename,SAL,DEPT
  FROM emp_table ORDER BY 1 DESC, 2 DESC,4;
  BEGIN
       owa_util.mime_header('application/octet', FALSE );
          htp.p('Content-Disposition: attachment; filename="Employee.csv"');
          owa_util.http_header_close;
  --Printer Header Row
       htp.p('Employee '  || ',' || 'Name'   || ',' || 'Salary'  || ','|| 'Department' ||  chr(13));
  for cThis in cEmp
  LOOP
            htp.p( '"'|| cThis.eno ||'"'||   ','|| '"'|| cThis.ename   || '"'|| ',' || cThis.sal||  ','|| '"'|| cThis.dept  || '"' || chr(13));
      END LOOP;
  htmldb_application.g_unrecoverable_error := true;
  EXCEPTION
            WHEN OTHERS THEN
                 htp.p('Download Error ' || SQLERRM || ' with error code ' || SQLCODE);
  END;
  

  Also, you can disable the download report link in the interactive report menu by going to reports-> Search bar attribute->, under include in the Actions Menu: uncheck the download option.

  I hope this helps.

  Thank you
  Manish

• I created an interactive navigation along the animated and imported and that the muse. Animations works very well, but does not have the interactivity. ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur

  I created an interactive navigation along the animated and imported and that the muse.
  Animations works very well, but does not have the interactivity.
  ((par exemple si je clique sur le "bouton à la maison", que le site ne s'ouvre pas dans mon navigateur comme il se doit),)
  Anyone have an idea how I can fix this problem?

  Hello

  As you use the edge with muse file you do not put the full URL.

  Please try the code below.

  Window.Open("..) /.. /arbeiten.html","_top");

  Concerning

  ViveK

• Query does not work in: interactive report _ APEX

  Hello

  I have two table QB_COLLEGE_DETAILS and QB_STUDENT_DETAILS, in the college details are stored in the QB_COLLEGE_DETAILS table and by studying the details are stored in the QB_STUDENT_DETAILS table. In the primary key table and foreign key in the COLLEGECODE.  Now, I created the interactive report using code below, but does not receive the correct value in the number of student column (see image below).

  SELECT COLLEGENAME, COLLEGECODE, COORDNAME, COORDEMAIL,

  (SELECT count (s.STUDENT_REGISTER_NUMBER) AS STUD_COUNT of QB_COLLEGE_DETAILS c, s QB_STUDENT_DETAILS

  where c.COLLEGECODE = s.COLLEGECODE) "STUDENT_COUNT".

  of QB_COLLEGE_DETAILS;

  

  My requirement is necessary find the number of students at the corresponding College. When I used above mentioned request that total student number appear in all lines.

  could you add your suggestion, I have to do?

  Thank you

  Issac

  ISSAC-Oracle wrote:

  I have two table QB_COLLEGE_DETAILS and QB_STUDENT_DETAILS, in the college details are stored in the QB_COLLEGE_DETAILS table and by studying the details are stored in the QB_STUDENT_DETAILS table. In the primary key table and foreign key in the COLLEGECODE.  Now, I created the interactive report using code below, but does not receive the correct value in the number of student column (see image below).

  SELECT COLLEGENAME, COLLEGECODE, COORDNAME, COORDEMAIL,

  (SELECT count (s.STUDENT_REGISTER_NUMBER) AS STUD_COUNT of QB_COLLEGE_DETAILS c, s QB_STUDENT_DETAILS

  where c.COLLEGECODE = s.COLLEGECODE) "STUDENT_COUNT".

  of QB_COLLEGE_DETAILS;

  

  My requirement is necessary find the number of students at the corresponding College. When I used above mentioned request that total student number appear in all lines.

  could you add your suggestion, I have to do?

  What you need to do is ask questions properly, providing useful information that allowing the problem can be reproduced, rather than unnecessary screenshots.

  This is the base of SQL. Oracle run internal SQL training courses?

  There is no correlation in your "virtual column" subquery to restrict the number of students for each college. The request must be:

  select
      c.collegename
    , c.collegecode
    , c.coordname
    , c.coordemail
    , (select count(s.student_register_number) as stud_count from qb_student_details s where c.collegecode = s.collegecode) "STUDENT_COUNT"
  from
      qb_college_details c
  

  However, unless there are a large number of colleges to which no students registered, it is likely that it will be more efficient to use an outer join:

  select
      c.collegename
    , c.collegecode
    , c.coordname
    , c.coordemail
    , count(s.student_register_number) student_count
  from
      qb_college_details c
        left outer join qb_student_details s
          on c.collegecode = s.collegecode
  group by
      c.collegename
    , c.collegecode
    , c.coordname
    , c.coordemail
  

• LOV POP classic report not in an interactive report

  My version of oracle application Express for Oracle 11g
  
  Dear Forum
  
  We need a CLASSIC report where I can define what information will my report.
  
  For example:
  
  My report contain
  
  ID NAME DATE
  
  
  In the Drag and Drop layout, I created two cause of gatherers of data I need to choose between Date_picker_1 and Datepicker_2 information. two of them correspond to this DAY
  
  In my area source classic report, I write something like this:
  
  SELECT id, name DATE where between: Date_picker_1 and: Datepicker_2 can Ichoose months but nothing happen.
  
  I know you can do this, but my boss in the interactive report don't ' like interactive report (I don't know why) so my problem is in the classic report.
  
  Danny Lima
  Ecuador
  
  PD: I'm not speak English very well

  Hey Danny,

  It works now, one thing lack you submits the value of items in session state.

  Edited your dynamic action and added a real action Run of PL/SQL Code with sequence 1 before the refresh action

  Thank you

• When I try to change the interactive report columns, then triggers the error: "unable to change column attributes. "ORA-01403: no data found. Pls tell me why?

  When I try to change the interactive report columns, then triggers the error: "unable to change column attributes. "ORA-01403: no data found. Pls tell me why?

  You use listener EA3 ADR?

• Contains no column 5 added to the interactive report apex

  Hi, I added a column in the query to the interactive report region and it does not appear in the designer of the Page, as it is not available when running in the list of columns through the action of the report menu.

  In the 4 apex when the query was changed directly a message was generated with the details of the new or modified columns, but the Apex 5 when I change the query and save, nothing happens.

  How to view the new column?

  Thank you.

  carlosjch wrote:

  Thanks fac586, I already tried to use view of the component, when I modify the query the new column is added, a message appears: area update.   No details of the new column appears in the message.  The result is the same, the column is not available after that.

  What happens if you create another IR with the new query?

• Filter delete automatically the interactive report

  Hello world

  We are seeing the question in the filter APEX. I applied the action filter-> filter. the filter is applied as expected. then we are navigate current page to another new page. When we return to the old filter page, we are not able to get the filter.

  For example: we have the "amount" column I applied a quantity of filter > filter 0 on page 1, then page 2 accessing we. When we return to page 1 we are not able to find the amount > 0 filter

  Let me know how to solve this problem.

  Kind regards

  Sushant

  Hi LnTInfotech,

  LnTInfotech wrote:

  Hi Sunil,

  Thanks for your information, but in my case, we do not save the default (primary) report. We have to got to page 1 to page 2 with any filter and return back to page 1 need to show the same filter.

  Kind regards

  Sushant

  Are you compensation/reactivate the interactive link (button, breadcrumb) report? Reference: a link to the interactive reports

  As clearing (CIR) /resetting (IRB) interactive report leads to clear the filters applied to the interactive report in the session active.

  Note: Filters / other attributes of the action menu applied to the interactive report are specific session, user may choose to save it as a saved report interactive and developer can choose to save as the main report.

  For more information about interactive reports see the Oracle APEX documentation and tutorials available on Oracle Learning Library like this:

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/Apex/R40/apexirr/apexirradv/apexirradv_ll.htm

  I hope this helps!

  Kind regards

  Kiran

• Creating a Validation in the interactive report

  I use a link change on my interactive report to call a form page. I need to have a validation before the new page is opened (which gives an error on the report and do not open new form). I added the following the link attributes section of the interactive report:
  
  onclick = "JavaScript:doSubmit('EDIT'); »
  
  But it does not seem to trigger the validation. I even tried makingt status of validation he 'ALL' but it's always just goes straight to the new page. Am I missing something?

  Hello:

  Make your column of link of type 'Link to target personalized' and is set a goal to be "URL" and specify "javascript:doSubmit();" to the URL. Define a branch ' on submit and after treatment "to go to the page that has the form.

  CITY

• Initial value for the interactive report

  I have an interactive report that has a where clause condition clause: where =(:P50_employeeName) used.

  (: P50_employeeName) is a a list of selection without value null. When the page loads the selection list displays the value employee1, but the interactive report is empty. It's not until I select another value within the selection list becoems active report. How I can so when page loading the interactive report shows instead of being blank? I can't the values of hard employee-coding as each user can see only the user in their Department.

  Hello

  Since I don't know all your table structure, it was just a quick sampling of the approach.

  I guess that your LOV would have the correct where clause to control its content, and you can add additional conditions to the IR where clause as well.

  Here is an example of one of my IR where clauses

  the case when: P200_DEPARTMENT = 0 then 1

  When: P200_DEPARTMENT <> 0 and: P200_CREW = 0 and: P200_DEPARTMENT = c.crewdeptkey, 1

  When: P200_DEPARTMENT <> 0 and: P200_CREW | " <> 0 and: P200_CREW = c.crewkey, 1

  end if 0 = 1

  Kind regards
  Brad